Synthesis of palladium–biscarbene complexes derived from 1,1′-methylenebis(1,2,4-triazole) functionalized in the methylene bridge

Palladium–biscarbene complexes derived from N,N′-bis(1,2,4-triazol-1-yl)methane, which bear an alkyl chain functionalized with a hydroxyl group, have been synthesized ([Pd(L1)Br₂] (6) and [Pd(L1)I₂] (7) [L1 = 1,1′-(3-hydroxypropylidene)bis(4-butyl-4,5-dihydro-1H-1,2,4-triazol-5-ylidene)]). Each product is obtained as a non-equimolecular mixture of two conformers. The hydroxyl group has been replaced by bromide and methanesulphonate and ( [Pd(L2)Br₂] [L2 = 1,1′-(3-bromopropylidene)bis(4-butyl-4,5-dihydro-1H-1,2,4-triazol-5-ylidene)] (9)) and ([Pd(L3)Br₂] [L3 = 1,1′-(3-methanesulphonyloxypropylidene)-bis(4-butyl-4,5-dihydro-1H-1,2,4-triazol-5-ylidene)] (10)) were obtained, respectively, as mixtures of conformers. All compounds consist of a six-membered metallacyclic structure in a boat conformation. Major conformers present the functionalized chain in the axial position, while in minor conformers it is located in the equatorial position.     

Synthesis of aryl alkynyl carboxylic acids and aryl alkynes from propiolic acid and aryl halides by site selective coupling and decarboxylation

The coupling of propiolic acid with aryl iodides afforded the aryl alkynyl carboxylic acids and aryl alkynes in generally good yields. Aryl alkynyl carboxylic acids were obtained when the reaction was performed in the presence of Pd(PPh₃)₂Cl₂ (2.5 mol %), dppb (5.0 mol %) and DBU (5 equiv) at 50 °C. For the synthesis of the terminal aryl alkynes, the reaction was conducted in the presence of Pd(PPh₃)₂Cl₂ (2.5 mol %), dppb (5.0 mol %), DBU (5.0 equiv), and Cu(acac)₂ (10 mol %) at 25 °C for 5 h, and further reacted at 60 °C for 6 h.     

Synthesis and characterization of novel five-membered palladacycles

3-(2-Chloroquinolin-3-yl)-1,5-bis(3,4,5-trimethoxy-phenyl)-pentane-2,4-dione derivatives 3a–b were conveniently synthesized in excellent yields (82% each) by tandem Knoevenagel condensation reactions of 2-chloro-3-carbaldehyde-quinoline 1a–b with 3,4,5-trimethoxy acetophenone, followed by a base catalyzed Michael addition, such as DBU (1,8-diazabicyclo[5,4,0]undec-7-ene) with or without solvent. The reactions of 3a–b with Pd(dba)₂ in the presence of PPh₃ (1:2) in degassed acetone provided the dinuclear palladium complexes {Pd(C,N-2-C₉H₄N–CH–[–CH₂CO(3,4,5-(OMe-)₃–C₆H₂-]₂–3-R-6)Cl(PPh₃)}₂ [(R = H (4a), R = OMe (4b)] in moderate yields (38% and 43%), which in turn reacted with an excess of isonitrile XyNC (Xy = 2,6-Me₂C₆H₃) to give the corresponding palladacycles 5a–b in moderate yields (45% and 43%). The palladacycles 5a–b were also obtained in similar yields (32% and 33%) via a one-pot oxidative addition reaction of 3a-b with isonitrile XyNC:Pd(dba)₂ (4:1). The products were characterized by satisfactory elemental analysis and spectral studies (IR, ¹H, and ³¹P NMR). The crystal structure of 5a was determined by X-ray crystallography diffraction studies.     

Catalytic asymmetric cyano-phosphorylation of aldehydes using a YLi3tris(binaphthoxide) complex (YLB)

A highly enantioselective cyano-phosphorylation of aldehydes catalyzed by a YLi₃tris(binaphthoxide) complex YLB 1 is described. The slow addition of diethyl cyanophosphonate 4 to aldehydes 5 in the presence of YLB 1 (10 mol %), H₂O (30 mol %), tris(2,6-dimethoxyphenyl)phosphine oxide 3a (10 mol %), and BuLi (10 mol %) afforded cyanohydrin O-phosphates 6 in up to 98% yield and 97% ee. Mechanistic studies revealed that the addition of cyanide to aldehydes is irreversible and determines the enantioselectivity. The reaction mechanism is also discussed in detail.     

Two novel Keggin tungstocobaltates grafted by cobaltII complex group(s): K[Co(phen)2(H2O)]2[HCoW12O40]·2H2O and [Co(2,2′-bipy)3]1.5{[Co(2,2′-bipy)2(H2O)][HCoW12O40]}·0.5H2O

Two novel inorganic–organic hybrid compounds composed of Keggin tungstocobaltate framework and cobalt(II)–N coordination complexes, K[Co(phen)₂(H₂O)]₂[HCoW₁₂O₄₀]·2H₂O (1) (phen = 1,10-phenanthroline) and [Co(2,2′-bipy)₃]_1.5{[Co(2,2′-bipy)₂(H₂O)][HCoW₁₂O₄₀]·0.5H₂O (2) (bipy = bipyridine), have been synthesized under hydrothermal conditions by directly using Keggin POMs as starting materials, which were characterized by elemental analyses, IR, TG analyses and X-ray single crystal diffraction. Crystal data for compound 1: C₄₈H₄₁Co₃KN₈O₄₄W_12, triclinic, space group P-1, a = 10.918(5) Å, b = 13.401(5) Å, c = 13.693(5) Å, α = 69.291(5)°, β = 71.568(5)°, γ = 78.421(5)°, V = 1768.9(12) Å³, Z = 1; for compound 2: C₁₃₀H₁₀₄Co₇N₂₆O₈₃W_24, orthorhombic, space group, C2/c, a = 46.839(9) Å, b = 14.347(3) Å, c = 26.147(5) Å, α = β = γ = 90°, V = 17,570(6) Å³, Z = 4. Compound 1 exhibits a pseudo-1D chainlike structure, in which potassium ions act as linkages of Keggin unit doubly grafted by [Co(phen)₂(H₂O)] complex. Compound 2 represents a [Co(2,2′-bipy)₂(H₂O)]²⁺ mono-grafted Keggin tungstocobaltate derivative with 1.5[Co(2,2′-bipy)₃]²⁺ countercations. The cyclic voltammetric behavior of 1-CPE is similar to the parent 3-CPE, but the cyclic voltammetric behavior of Co^II shows a little difference. Variable-temperature magnetic susceptibility measurement of compound 1 demonstrates the presence of antiferromagnetic interactions.     

Dimeric and monomeric palladium(II) parent-amido (NH2) complexes: Synthesis,characterization, and reactivity

The treatment of [PdL₃(NH₃)]OTf (L₃ = (PEt₃)₂(Ph) (1), (2,6-(Cy₂PCH₂)₂C₆H₃) (3)) with NaNH₂ in THF afforded dimeric and monomeric parent-amido palladium(II) complexes with bridging and terminal NH₂, respectively, anti-[Pd(PEt₃)(Ph)(μ-NH₂)]₂ (2) and Pd(2,6-(Cy₂PCH₂)₂C₆H₃)(NH₂) (4). The dimeric complex 2 crystallizes in the space group P2₁/n with a = 13.228(2) Å, b = 18.132(2) Å, c = 24.745(2) Å, β = 101.41(1)°, and Z = 4. It has been found that there are two crystallographically independent molecules with Pd(1)–Pd(2) and Pd(3)–Pd(4) distances of 2.9594 (10) and 2.9401(9) Å, respectively. The monomeric amido complex 4 protonates from trace amounts of water to give the cationic ammine species [Pd(2,6-(Cy₂PCH₂)₂C₆H₃)(NH₃)]⁺. Complex 4 reacts with diphenyliodonium triflate ([Ph₂I]OTf) to give aniline complex [Pd(2,6-(Cy₂PCH₂)₂C₆H₃)(NH₂Ph)]OTf (5). Reaction of 4 with dialkyl acetylenedicarboxylate (DMAD, DEAD) yields diastereospecific palladium(II) vinyl derivative (Z)–(Pd(Cy₂PCH₂)₂C₆H₃)(CR = CR(NH₂)) (R = CO₂Me (6a), CO₂Et (6b)). Reacting complexes 6a and 6b with p-nitrophenol produces (Pd(Cy₂PCH₂)₂C₆H₃)(OC₆H₄–p-NO₂) (8) and cis-CHR = CR(NH₂), exclusively.     

Coordination enhancement of single-molecule magnet behavior of Tb(III)–Cu(II) dinuclear systems

Tb(III)–Cu(II) based single-molecule magnets (SMMs) were synthesized to investigate the relationship between magnetic anisotropy and the symmetry of the ligand field, by the reaction of [TbCu(o-vanilate)₂(NO₃)₃] with 2,2-dimethyl-1,3-propanediamine (3), followed by the reaction of one another equivalent of o-vaniline (4). Both complexes behave as SMM in the temperature range of 2.8–4.0 K (3) and 2.8–5.2 K (4), showing semi-circle shapes of Cole–Cole plots with α parameters in the ranges of 0.27–0.41 and 0.11–0.32. The energy barriers Δ/k_B for the spin flippings were estimated from the Arrhenius plots to be 29(2) K for 3 and 32.2(6) K for 4, respectively.     

Isolation and crystallographic characterization of solvate- and anion-stabilized PCP pincer complexes of palladium(II)

Pincer PCP-Pd(II) complex [PdCl(PCP)] (1) (PCP = ^?CH(CH₂CH₂PPh₂)₂) reacts with AgNO₃ to give [Pd(NO₃)(PCP)] (2). Similar reaction with AgBF₄ gives the aqua complex [Pd(OH₂)(PCP)][BF₄] (3) and the dinuclear complex [{Pd(PCP)}₂(μ-Cl)][BF₄] (4) with singly bridging chloro ligand. All new complexes were characterized by NMR spectroscopy, ESI-MS and single-crystal X-ray diffraction. Complex 1 and the triflate complex [Pd(OTf)(PCP)] (5) are active towards Suzuki–Miyaura coupling between aryl bromides and phenyl boronic acid.     

Synthesis,spectroscopy and structures of halogen and sulfur-bridged dinuclear silver(I) complexes with N1-substituted thiophene-2-carbaldehyde thiosemicarbazone

The reactions of silver(I) halides (Cl or Br) with thiophene-2-carbaldehyde N¹-methyl thiosemicarbazone (HttscMe) in the presence of Ph₃P (1:1:1 molar ratio) yield halogen-bridged dimers, [Ag₂(μ-X)₂(η¹-S-HttsMe)₂(PPh₃)₂] (X = Cl, 1; Br, 2). The use of 2,2′-bipyridine in lieu of Ph₃P in the reaction of silver(I) chloride with HttscMe yields the sulfur-bridged dimer, [Ag₂(μ-S-HttscMe)₂(η¹-HttsMe)₂] · 2CHCl₃ 3. The substituents have altered the nature of bridge between the two silver atoms. The Ag···Ag separation (3.4867(5) Å) in complex 3 is less than that in the halogen-bridged dimers (3.734(4) Å 1; 3.746(5) Å 2). Unlike PPh₃ the co-ligand 2,2′-bipyridine did not coordinate to the silver center, but was necessary for crystallization in the reaction with the thio-ligand. NMR spectroscopy revealed that the complexes remained unchanged in the solution state (CDCl₃).     

Trinuclear copper(I) complex of 1,3-bis(2-pyridinylmethyl)imidazolylidene as a carbene-transfer reagent for the preparation of catalytically active nickel(II) and palladium(II) complexes

Reactions of 1,3-bis(pyridin-2-ylmethyl)-1H-imidazol-3-ium hexafluorophosphate, ([HL1](PF₆), L1 = 1,3-bis(pyridin-2-ylmethyl)imidazolylidene) and 1,3-bis(pyridin-2-ylmethyl)-1H-benzimidazol-3-ium hexafluorophosphate ([HL2](PF₆), L2 = 1,3-bis(pyridin-2-ylmethyl)benzoimidazolylidene) with cuprous oxide in acetonitrile readily yielded trinuclear complexes [Cu₃(L1)₃(PF₆)₃] (1) and [Cu₃(L2)₃(PF₆)₃] (2). Treatment of 1 with Ni(PPh₃)₂Cl₂ and Pd(cod)Cl₂ gave [Ni(L1)Cl](PF₆) (3) and [Pd(L1)Cl](PF₆) (4), respectively, due to transmetalation. [Ni(L1)₂](PF₆)₂ (5) was obtained from the reaction of [Cu₃(L1)₃(PF₆)₃] and Raney nickel in acetonitrile. All these complexes have been fully characterized. Both 1 and 2 consist of a triangular Cu₃ core with each Cu–Cu bond capped by an imidazolylidene group. Each imidazolylidene acts as a bridging ligand in a μ₂ mode and is bonded equally to two Cu(I) ions. The pincer nickel and palladium complexes are square-planar and contain a tridentate NCN ligand. Complexes 3 and 4 are efficient catalyst precursors for Kumada–Corriu and Suzuki–Miyaura coupling reactions of aryl halides with organometallic reagents.     

Syntheses,crystal structures and properties of dinuclear copper(I) complexes

Two dinuclear molecule-bridged Cu(I) complexes, (μ-bpym)[Cu(PPh₃)Cl]₂ (1), [(μ-bpym)(CuL)₂](ClO₄)₂·(CH₃CN)₂(H₂O) (2) (bpym = 2,2′-bipyrimidine, L = (R)-(+)-2,2′-bis(diphenylphospho)-1,1′-dinaphthalene) have been synthesized and characterized. The molecular structures of the two new dinuclear compounds exhibit bridging of two copper(I) centers by the symmetrically bis-chelating bpym ligand. Intriguingly, compound 1 features a remarkable “intramolecular organic sandwich” configuration where the central 2,2′-bipyrimidine bridging ligand interacts in π/π/π fashion with two phenyl rings from the coligands above and below the central plane, while chiral compound 2 exhibits second-order nonlinear optical effect and temperature-dependent luminescence. Upon decreasing the temperature from 298 to 10 K, compound 2 shows a red light emission.     

Mesophase and magnetic behavior in cobalt(II) and iron(II) compounds

The metal complexes with long alkyl chains [Co(C16-terpy)₃](BF₄)₂ (1) and [Fe(C16-terpy)₂](BF₄)₂ (2) were synthesized and the physical properties of the complex were characterized by magnetic susceptibility, Mössbauer spectroscopy, polarizing optical microscopy, differential scanning calorimetry, and X-ray scattering, where C16-terpy is 4′-hexadecyloxy-2,2′:6′,2′′-terpyridine. Variable-temperature magnetic susceptibility measurements and/or Mössbauer studies revealed that the complex 1 exhibited unique spin transition (T_1/2↓ = 217 K and T_1/2↑ = 260 K) induced by structural phase transition, and the complex 2 was in the low-spin state in the temperature region of 5–400 K before the first mesophase transition. The cobalt(II) and iron(II) complexes exhibited liquid-crystal properties in the temperature range of 371–528 K and 466–556 K, respectively. After mesophase transition, the complex 1 exhibited only slight spin transition (T_1/2↓ = 266 K and T_1/2↑ = 279 K), and the complex 2 was in the low-spin state. The compounds with multifunction, i.e., magnetic property and liquid-crystal properties, are important in the development of molecular materials.     

Hydroesterification of cyclohexene using the complex Pd(PPh3)2(TsO)2 as catalyst precursor: Effect of a hydrogen source (TsOH,H2O) on the TOF and a kinetic study (TsOH: p-toluenesulfonic acid)

The hydroesterification of cyclohexene is catalyzed by a preformed Pd(PPh₃)₂(TsO)₂ complex I in methanol as solvent. The effect of PPh₃, TsOH, and water on the TOF has been evaluated. The system I/PPh₃/TsOH=1/6/8, in the presence of 800 ppm of H₂O, at 373 K and under 2.0 MPa of CO leads to a TOF as high as 850 h⁻¹. The increase of TOF observed adding a hydride source such as TsOH and H₂O suggests that Pd-hydride species plays a key role in the first step of the catalytic cycle. The initial reaction rate increases linearly with the concentration of cyclohexene and of MeOH and passes through a maximum with increasing the pressure of CO. The rate equation r₀=k₁P_CO (1+k₂P_CO+k₃P_CO²)⁻¹ fits well the experimental data. The values of k₁, k₂, and k₃ have been evaluated at different temperatures. From the plot ln k versus 1/T, E₁=19.4 kcal/mol, E₂=20.6 kcal/mol and E₃=6.5 kcal/mol have been evaluated. On the basis of experimental evidences and of the kinetic study, a catalytic cycle mechanism has been proposed.     

[MoFe3S4]3+ and [MoFe3S4]2+ cubane clusters containing a pentamethylcyclopentadienyl molybdenum moiety

A series of organometallic molybdenum/iron/sulfur clusters of the general formula [Cp¹MoFe₃S₄L_n]^m (Cp¹ = η⁵-C₅Me₅; L = S^tBu, SPh, Cl, I, n = 3, m = 1−; L_n = I₂(P^tBu₃), m = 0; L = 2,6-diisopropylphenylisocyanide (ArNC), n = 7, m = 1+) have been synthesized. A cubane cluster (PPh₄)[Cp¹MoFe₃S₄(S^tBu)₃] (2) was isolated from a self-assembly reaction of Cp¹Mo(S^tBu)₃ (1), FeCl₃, LiS^tBu, and S₈ followed by cation exchange with PPh₄Br in CH₃CN, while an analogous cluster (PPh₄)[Cp¹MoFe₃S₄(SPh)₃] (3) was obtained from the Cp¹MoCl₄/FeCl₃/LiSPh/PPh₄Br reaction system or from a ligand substitution reaction of 2 with PhSH. Treatment of 2 with benzoyl chloride gave rise to (PPh₄)[Cp¹MoFe₃S₄Cl₃] (4), which was in turn converted to (PPh₄)[Cp¹MoFe₃S₄I₃] (5) by the reaction with NaI. A neutral cubane cluster Cp¹MoFe₃S₄I₂(P^tBu₃) (6) was generated upon treating 5 with P^tBu₃. Although reduction of 4 by cobaltocene under the presence of ArNC resulted in a disproportionation of the cubane core to give Fe₄S₄(ArNC)₉Cl (7), a similar reduction reaction of 5 produced [Cp¹MoFe₃S₄(ArNC)₇]I (8), where the MoFe₃S₄ core was retained. The crystal structures of 4–6, and 8 were determined by the X-ray analysis.     

Enantioselective construction of all-carbon quaternary spirocenters through a Pd-catalyzed asymmetric intramolecular ipso-Friedel–Crafts allylic alkylation of phenols

A novel catalytic asymmetric synthetic method for making spirocyclohexadienones with an all-carbon quaternary spirocenter was developed based on the Pd-catalyzed intramolecular ipso-Friedel–Crafts allylic alkylation of phenols. When 5 mol % of the Pd catalyst and 12 mol % of (?)-9-NapBN (?)-3e were used, the spirocyclic adduct was obtained with up to 93% ee, albeit with low chemical yield. On the other hand, when using 6 mol% of the Trost ligand (R,R)-3k, the spirocyclic adducts were obtained in good yields with up to 89% ee (diastereoselectivity = 9.2:1).     

Trinuclear copper(I) complex of 1,3-bis(2-pyridinylmethyl)imidazolylidene as a carbene-transfer reagent for the preparation of catalytically active nickel(II) and palladium(II) complexes

Reactions of 1,3-bis(pyridin-2-ylmethyl)-1H-imidazol-3-ium hexafluorophosphate, ([HL1](PF₆), L1 = 1,3-bis(pyridin-2-ylmethyl)imidazolylidene) and 1,3-bis(pyridin-2-ylmethyl)-1H-benzimidazol-3-ium hexafluorophosphate ([HL2](PF₆), L2 = 1,3-bis(pyridin-2-ylmethyl)benzoimidazolylidene) with cuprous oxide in acetonitrile readily yielded trinuclear complexes [Cu₃(L1)₃(PF₆)₃] (1) and [Cu₃(L2)₃(PF₆)₃] (2). Treatment of 1 with Ni(PPh₃)₂Cl₂ and Pd(cod)Cl₂ gave [Ni(L1)Cl](PF₆) (3) and [Pd(L1)Cl](PF₆) (4), respectively, due to transmetalation. [Ni(L1)₂](PF₆)₂ (5) was obtained from the reaction of [Cu₃(L1)₃(PF₆)₃] and Raney nickel in acetonitrile. All these complexes have been fully characterized. Both 1 and 2 consist of a triangular Cu₃ core with each Cu–Cu bond capped by an imidazolylidene group. Each imidazolylidene acts as a bridging ligand in a μ₂ mode and is bonded equally to two Cu(I) ions. The pincer nickel and palladium complexes are square-planar and contain a tridentate NCN ligand. Complexes 3 and 4 are efficient catalyst precursors for Kumada–Corriu and Suzuki–Miyaura coupling reactions of aryl halides with organometallic reagents.     

Magnetic properties of hybrid organo-inorganic copper(II) oxovanadate(V) phosphate and phosphonate bridged systems

The hybrid organo-inorganic compounds [Cu₄(bipy)₄V₄O₁₁(PO₄)₂]nH₂O (n ∼ 5) (1), [Cu₂(phen)₂(PO₄)(H₂PO₄)₂(VO₂) · 2H₂O] (2) and [Cu₂(phen)₂(O₃PCH₂PO₃)(V₂O₅) (H₂O)]H₂O (3) which present different bridging forms of the phosphate/phosphonate group, show different bulk magnetic properties. We herein analyze the magnetic behaviour of these compounds in terms of their structural parameters. We also report a theoretical study for compound (1) assuming four different magnetic exchange pathways between the copper centres present in the tetranuclear unit. For compound (1) the following J values were obtained J₁ = +3.29; J₂ = −0.63; J₃ = −2.23; J₄ = −46.14 cm⁻¹. Compound (2) presents a Curie–Weiss behaviour in the whole range of temperature (3–300 K), and compound (3) shows a maximum for the magnetic susceptibility at 64 K, typical for antiferromagnetic interactions. These data where fitted using a model previously reported in the literature, assuming two different magnetic exchange pathways between the four copper(II) centres, with J₁ = −30.0 and J₂ = −8.5 cm⁻¹.     

Synthesis and investigations of mixed-ligand lanthanide complexes with N,N′-dipyrrolidine-N′′-trichloracetylphosphortriamide,dimethyl-N-trichloracetylamidophosphate, 1,10-phenanthroline and 2,2′-bipyrimidine

Coordination compounds with general formula [Ln(L¹)₃phen], where Ln = Nd, Eu, Er, Yb, HL¹ = N,N′-dipyrrolidine-N′′-trichloracetylphosphortriamide, phen = 1,10-phenanthroline; [Ln(L¹)₃bpm], where Ln = La, Nd, Eu, Gd, Er, Y, bpm = 2,2′-bipyrimidine and [{Ln(L²)₃}₂(μ-bpm)], where Ln = La, Nd, Eu, Gd, Er, Y, HL² = dimethyl-N-trichloracetylamidophosphate have been synthesized and characterized by means of IR and UV–Vis spectroscopy. Crystal structures of [Nd(L¹)₃phen] (1), [Nd(L¹)₃bpm] (2) and [{Nd(L²)₃}₂(μ-bpm)] (3) have been determined. It was found, that in the deprotonated form the phosphoryl ligands (L¹)^? and (L²)^? are coordinated to the neodymium atoms in a bidentate manner via the oxygen atoms of the phosphoryl and the carbonyl groups with formation of six-membered metallocycles. In the case of compounds 1 and 2 the 1,10-phenanthroline (or 2,2′-bipyrimidine) molecules are coordinated to the metals in a bidentate manner via the nitrogen atoms. In contrast 2,2′-bipyrimidine acts in the bidentate-bridge mode forming binuclear complex 3. Variable-temperature magnetic susceptibility measurements of 3 and [{Gd(L²)₃}₂(μ-bpm)] (4) reveal a weak antiferromagnetic interaction between the two magnetic centres, whereas in the case of [{Eu(L²)₃}₂(μ-bpm)] (5) the presence of spin–orbit coupling leads to a deviation from the Curie and Curie–Weiss laws.     

Synthesis and characterization of three Cu(II), Zn(II), Cd(II) supramolecular complexes bridged by biphenyl 2,2′-dicarboxylate

Three complexes, M₂(bpy)₂(bpdc)₂·xH₂O [M = Cu, x = 0; M = Zn or Cd, x = 2], have been hydrothermally synthesized by 1,1′-biphenyl-2,2′-dicarboxylic acid (H₂bpdc) with 2,2′-bipyridine (bpy) to form binuclear molecules. In each, the two bpdc groups align the two opposing planar [M(bpy)]²⁺ cations. The molecules are connected by C–H⋯O hydrogen bonds, π–π stacking, and C–H⋯π interactions to form three dimensional supramolecular networks. Furthermore, at room temperature, complex 3 exhibits strong photoluminescence.     

Mono- and di-nuclear complexes of thiosemicarbazones with copper(I): Synthesis,spectroscopy and structures

Reactions of copper(I) halides with a series of thiosemicarbazones, namely, benzaldehyde thiosemicarbazone (R¹R²CN–NH–C(S)–NH₂, R¹ = Ph, R² = H; Hbtsc), 2-benzoylpyridine thiosemicarbazone (R¹ = Ph, R² = py; Hbpytsc), and acetone thiosemicarbazone (R¹ = R² = Me; Hactsc), in the presence of PPh₃ has formed dimeric complexes, viz. sulfur bridged [Cu₂(μ-S-Hbtsc)₂Br₂(PPh₃)₂]·2H₂O (1), iodo-bridged [Cu₂(μ-I)₂(η¹-S-Hbtsc)₂(PPh₃)₂] (2), and heterobridged [Cu₂(μ₃-S,N³-Hactsc)(η¹-Br)(μ-Br)(PPh₃)₂] (3), as well as mononuclear complexes [CuX(η¹-S-Hbpytsc)(PPh₃)₂]·CH₃CN (X = Br, 4; Cl, 5). Complexes 1, 2, 4 and 5 involve thiosemicarbazone ligands in η¹-S bonding mode while in compound 3, ligand acts in N³, S-chelation-cum-S-bridging mode (μ₃-S,N³ mode). The intermolecular interactions such as, N²H?X, HN¹H?X (X = S, Br, Cl), CH?π interactions lead to 2D networks. All the complexes have been characterized with the help of elemental analyses, IR, ¹H, and ³¹P NMR spectroscopy, and single crystal X-ray crystallography. The role of a solvent in alteration of nuclearity and bonding modes of complexes has been highlighted.