A Three-Enzyme Cascade Reaction through Positional Assembly of Enzymes in a Polymersome Nanoreactor

Porous polymersomes based on block copolymers of isocyanopeptides and styrene have been used to anchor enzymes at three different locations, namely, in their lumen (glucose oxidase, GOx), in their bilayer membrane (Candida antarctica lipase B, CalB) and on their surface (horseradish peroxidase, HRP). The surface coupling was achieved by click chemistry between acetylene-functionalised anchors on the surface of the polymersomes and azido functions of HRP, which were introduced by using a direct diazo transfer reaction to lysine residues of the enzyme. To determine the encapsulation and conjugation efficiency of the enzymes, they were decorated with metal-ion labels and analysed by mass spectrometry. This revealed an almost quantitative immobilisation efficiency of HRP on the surface of the polymersomes and a more than statistical incorporation efficiency for CalB in the membrane and for GOx in the aqueous compartment. The enzyme-decorated polymersomes were studied as nanoreactors in which glucose acetate was converted by CalB to glucose, which was oxidised by GOx to gluconolactone in a second step. The hydrogen peroxide produced was used by HRP to oxidise 2,2′-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) to ABTS^.+. Kinetic analysis revealed that the reaction step catalysed by HRP is the fastest in the cascade reaction.     

Synthesis and self-assembly of poly(ethylene glycol)-block-poly(N-3-(methylthio)propyl glycine) and their oxidation-sensitive polymersomes

Amphiphilic block copolymers poly(ethylene glycol)-block-poly(N-3-(methylthio)propyl glycine) (PEG-b-PMeSPG) were synthesized via ring-opening polymerization of N-3-(methylthio)propyl glycine N-thiocarboxyanhydride (MeSPG-NTA) initiated by amino-terminated PEG. The self-assemblies of three PEG-b-PMeSPG copolymers with different PMeSPG block lengths were first prepared by nanoprecipitation method using THF and DMF, respectively, as the organic solvent, and their morphologies were studied by Cryo-EM and DLS. To prepare polymersomes loaded with glucose oxidase (GOx), double emulsion method followed by extrusion treatment was employed. The oxidation-responsive disruption of polymersomes was achieved upon the introduction of glucose because of the oxidants generated in-situ by GOx/glucose.     

Monosaccharide-responsive release of insulin from polymersomes of polyboroxole block copolymers at neutral pH

We synthesized a boroxole-containing styrenic monomer that can be polymerized by the reversible addition-fragmentation and chain transfer (RAFT) method. Poly(styreneboroxole) (PBOx) and its block copolymers with a poly(ethylene glycol) (PEG) as a hydrophilic block displayed binding to monosaccharides in phosphate buffer at neutral pH, as quantified by Wang's competitive binding experiments. By virtue of a controlled radical polymerization, we were able to adjust the degree of polymerization of the PBOx block to yield sugar-responsive block copolymers that self-assembled into a variety of nanostructures including spherical and cylindrical micelles and polymer vesicles (polymersomes). Polymersomes of these block copolymers exhibited monosaccharide-responsive disassembly in a neutral-pH medium. We demonstrated the possibility of using these polymersomes as sugar-responsive delivery vehicles for insulin in neutral phosphate buffer (pH 7.4). Encapsulated insulin could be released from the polymersomes only in the presence of sugars under physiologically relevant pH conditions.     

Microfluidic fabrication of monodisperse biocompatible and biodegradable polymersomes with controlled permeability

We describe a versatile technique for fabricating monodisperse polymersomes with biocompatible and biodegradable diblock copolymers for efficient encapsulation of actives. We use double emulsion as a template for the assembly of amphiphilic diblock copolymers into vesicle structures. These polymersomes can be used to encapsulate small hydrophilic solutes. When triggered by an osmotic shock, the polymersomes break and release the solutes, providing a simple and effective release mechanism. The technique can also be applied to diblock copolymers with different hydrophilic-to-hydrophobic block ratios, or mixtures of diblock copolymers and hydrophobic homopolymers. The ability to make polymer vesicles with copolymers of different block ratios and to incorporate different homopolymers into the polymersomes will allow the tuning of polymersome properties for specific technological applications.     

Synthesis and properties of amphiphilic star polysulfides

We here present the synthesis and characterisation of linear and star-shaped amphiphilic block copolymers based on hydrophobic polysulfides (poly(propylene sulfide), PPS) and hydrophilic polyethers (poly(ethylene glycol), PEG). We also discuss the proof of the principle of their responsiveness to oxidising conditions. In a water environment, these polymers aggregate in the form of sub-micron carriers that, due to the sensitivity to oxidation reactions typical of PPS, can be used for responsive drug delivery. In this first study we have focused on the study of large aggregates, which do not apparently show dramatic differences in behaviour when polymer chains with different degrees of branching are studied.     

Fabrication of polymersomes with controllable morphologies through dewetting w/o/w double emulsion droplets

In this work, monodisperse giant polymersomes are fabricated by dewetting of water-in-oil-in-water double emulsion droplets which are assembled by amphiphilic block copolymer molecules in a microfluidic device. The dewetting process can be tuned by solvation between solvent and amphiphilic block copolymer to get polymersomes with controllable morphology. Good solvent(chloroform and toluene) hinders dewetting process of double emulsion droplets and gets acornlike polymersomes or patched polymersomes. On the other hand, poor solvent(hexane) accelerates the dewetting process and achieves complete separation of inner water phase from oil phase to form complete bilayer polymersomes. In addition, twin polymersomes with bilayer membrane structure are formed by this facile method. The formation mechanism for different polymersomes is discussed in detail.     

Interfacial reactivity of block copolymers: understanding the amphiphile-to-hydrophile transition

Block copolymers offer an interesting platform to study chemically triggered transitions in self-assembled structures. We have previously reported the oxidative degradation of vesicles made of poly(propylene sulfide)-poly(ethylene glycol) (PPS-PEG) copolymers. Here we propose a mechanism for vesicle degradation deduced from copolymer conformational changes occurring at the air/water interface in a Langmuir trough together with a reactive subphase. The hydrophobic PPS block is converted into hydrophilic poly(propylene sulfoxide) and poly(propylene sulfone) by oxidation upon exposure to 1% aqueous H(2)O(2) subphase. As a result, a dramatic increase in area per molecule at constant surface pressure (Pi) was observed, followed by an apparent decrease (recorded as decrease in area at constant Pi) due to copolymer dissolution. For monolayers at the air/water surface, the large interfacial tensions present suppress increases in local curvature for alleviating the increased hydrophilicity of the copolymer chains. By contrast, vesicles can potentially rearrange molecules in their bilayers to accommodate a changing hydrophilic-lipophilic balance (HLB). Similar time scales for monolayer rearrangement and vesicle degradation imply a common copolymer chain solubilization mechanism, which in vesicles lead to an eventual transition to aggregates of higher curvature, such as cylindrical and spherical micelles. Subtle differences in response to the applied surface pressure for the diblock compared to the triblock suggest an effect of the different chain mobility.     

Formation of polymer vesicles by liquid crystal amphiphilic block copolymers

We report the formation of polymer vesicles (or polymersomes) by a new class of amphiphilic block copolymers in which the hydrophobic block is a side-on nematic liquid crystal polymer. Two series of these block copolymers, named PEG-b-PA444 and PEG-b-PMAazo444, with different hydrophilic/hydrophobic ratios were synthesized and characterized in detail. Polymersomes and nanotubes were formed by adding water into a solution of copolymers in dioxane. Polymersomes in water were finally obtained by dialyzing the resulting mixture against water. These self-assemblies have been studied by classical TEM and cryo-TEM. For the PEG-b-PA444 series, polymersomes were observed for hydrophilic/hydrophobic ratios ranging from 40/60 to 19/81. For PEG-b-PMAazo444 series, polymersomes were observed for hydrophilic/hydrophobic ratios ranging from 26/74 to 18/82. For a PEG-b-PA444 sample with hydrophilic/hydrophobic ratio equal to 25/75, a tubular morphology with tube diameter of typically 100 nm and tube length of up to 10 mum was also observed together with polymersomes during addition of water into the polymer solution in dioxane.     

Can polymersomes form colloidosomes?

Hydroxy-functionalized polymersomes (or block copolymer vesicles) were prepared via a facile one-pot RAFT aqueous dispersion polymerization protocol and evaluated as Pickering emulsifiers for the stabilization of emulsions of n-dodecane emulsion droplets in water. Linear polymersomes produced polydisperse oil droplets with diameters of ～50 μm regardless of the polymersome concentration in the aqueous phase. Introducing an oil-soluble polymeric diisocyanate cross-linker into the oil phase prior to homogenization led to block copolymer microcapsules, as expected. However, TEM inspection of these microcapsules after an alcohol challenge revealed no evidence for polymersomes, suggesting these delicate nanostructures do not survive the high-shear emulsification process. Thus the emulsion droplets are stabilized by individual diblock copolymer chains, rather than polymersomes. Cross-linked polymersomes (prepared by the addition of ethylene glycol dimethacrylate as a third comonomer) also formed stable n-dodecane-in-water Pickering emulsions, as judged by optical and fluorescence microscopy. However, in this case the droplet diameter varied from 50 to 250 μm depending on the aqueous polymersome concentration. Moreover, diisocyanate cross-linking at the oil/water interface led to the formation of well-defined colloidosomes, as judged by TEM studies. Thus polymersomes can indeed stabilize colloidosomes, provided that they are sufficiently cross-linked to survive emulsification.     

How molecular internal‐geometric parameters affect PB‐PEO polymersome size in aqueous solution

Amphiphilic polybutadiene polyethylene oxide (PB‐PEO) is one of the best known chemistries to form stable vesicular morphologies, stated as polymersomes, in aqueous environment. Mimicking cell membranes, these structures self‐assemble in an “amphiphilic window” determined by 0.15 < f < 0.35 where f is the ratio between the hydrophilic block volume and the entire diblock volume. However the polymersome size distribution also depends on molecular weight (M_n) and in order to gain insight on how f and M_n together determine polymersome size, we prepared PB‐PEO diblock copolymers with different block lengths and analyzed vesicle morphology via Dynamic light scattering (DLS) and Freeze‐fracture transmission electron microscopy (FF‐TEM). We found three main regimes: high f / low M_n with polymersomes of mixed diameter, high f / high M_n with mainly large polymersomes and low f, with mainly small polymersomes. In the first region, the polymersomes are highly polydisperse. There is a tendency towards increased diameter with increasing f and M_n. Taken together our findings can help to identify how polymersome self‐assembly can be controlled to achieve size distribution specificity alleviating the need for subsequent tuning of size via extrusion. This can pave the way for cost‐effective upscaling of polymersome production for biomedical and biomimetic applications. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 699–708     

Biocompatible functionalization of polymersome surfaces: a new approach to surface immobilization and cell targeting using polymersomes

Vesicles assembled from amphiphilic block copolymers represent promising nanomaterials for applications that include drug delivery and surface functionalization. One essential requirement to guide such polymersomes to a desired site in vivo is conjugation of active, targeting ligands to the surface of preformed self-assemblies. Such conjugation chemistry must fulfill criteria of efficiency and selectivity, stability of the resulting bond, and biocompatibility. We have here developed a new system that achieves these criteria by simple conjugation of 4-formylbenzoate (4FB) functionalized polymersomes with 6-hydrazinonicotinate acetone hydrazone (HyNic) functionalized antibodies in aqueous buffer. The number of available amino groups on the surface of polymersomes composed of poly(dimethylsiloxane)-block-poly(2-methyloxazoline) diblock copolymers was investigated by reacting hydrophilic succinimidyl-activated fluorescent dye with polymersomes and evaluating the resulting emission intensity. To prove attachment of biomolecules to polymersomes, HyNic functionalized enhanced yellow fluorescent protein (eYFP) was attached to 4FB functionalized polymersomes, resulting in an average number of 5 eYFP molecules per polymersome. Two different polymersome-antibody conjugates were produced using either antibiotin IgG or trastuzumab. They showed specific targeting toward biotin-patterned surfaces and breast cancer cells. Overall, the polymersome-ligand platform appears promising for therapeutic and diagnostic use.     

Combination of Episulfide Ring‐Opening Polymerization With ATRP for the Preparation of Amphiphilic Block Copolymers

We report for the first time the combination of ATRP and ring‐opening episulfide polymerization as a means to synthesize polysulfide‐based low‐dispersity amphiphilic block copolymers. The most significant finding is the possibility to perform ATRP under mild conditions using poly(propylene sulfide) macroinitiators, apparently without any significant copper sequestration by the polysulfides. Using glycerol monomethacrylate (GMMA) as a hydrophilic monomer, the polymers self‐assembled in colloidal structures with a morphology depending on the PS/GMMA ratio, but also probably on GMMA degree of polymerization. We here also present a new AFM‐based method to calculate the average number of amphiphilic macromolecules per micelle.     

Optical rotatory properties of synthetic polymers. II. Optical rotatory dispersion of poly(propylene sulfide)

Optically active propylene sulfide was polymerized in the presence of potassium hydroxide as catalyst to give optically active poly(propylene sulfide). Rotatory dispersion curves of the polymer thus obtained were measured in benzene and chloroform media. In both cases, the curves were anomalous in shape with the same sign, having troughs at 290 and 275 mμ, respectively. (–)-1,2-Diethylthiopropane was prepared as an optically active model compound of poly(propylene sulfide) in optical rotatory properties. It was found that the model compound also shows anomalous rotatory dispersion both in benzene and chloroform with the same sign. Thus it may be concluded that the anomalous dispersion of poly(propylene sulfide) must be attributed to an additional Cotton effect caused by the absorption of sulfide bonds, which are generally admitted to have absorptions at 200 and 230 mμ (shoulder).     

Labile Cross Links in Low Unsaturation Elastomers. II. Effect of Chain and Cross-Link Structure on Thermal and Oxidative Stability

Abstract

The thermal and oxidative stability of low unsaturation elastomers has been studied as a function of chain and cross-link structure by stress relaxation and oxygen absorption techniques. An ethylene-propylene terpolymer, a propylene oxide copolymer, and an ethylene sulfide-propylene sulfide terpolymer were used.     

脂质体为模板仿生硅化固定葡萄糖氧化酶

将脂质体囊泡与仿生硅化技术相结合,模拟细胞纳微环境,实现以脂质体为模板仿生制备氧化硅固定葡萄糖氧化酶(GOx),建立性能稳定的固定化酶.扫描电镜分析显示,固定化GOx为球形纳米粒子,粒径分布在200nm左右,在优化反应条件下GOx回收率达到71.8%.由于载体的空间限制作用及其提供的较稳定微环境,固定化GOx表现出良好的热稳定性和pH稳定性,其对变性剂耐受性和操作稳定性等也得到明显提高.     

pH-responsive Polymersome Based on PMCP-b-PDPA as a Drug Delivery System to Enhance Cellular Internalization and Intracellular Drug Release

Choline phosphate(CP) as a novel zwitterion possesses specific and excellent properties compared with phosphorylcholine(PC), as well as its polymer, such as poly(2-(methacryloyloxy)ethyl choline phosphate)(PMCP), has been studied extensively due to its unique characteristics of rapid cellular internalization via the special quadrupole interactions with the cell membrane. Recently, we reported a novel PMCP-based drug delivery system to enhance the cellular internalization where the drug was conjugated to the polymer via reversible acylhydrazone bond. Herein, to make full use of this feature of PMCP, we synthesized the diblock copolymer poly(2-(methacryloyloxy)ethyl choline phosphate)-b-poly(2-(diisopropylamino)ethyl methacrylate)(PMCP-b-PDPA), which could self-assemble into polymersomes with hydrophilic PMCP corona and hydrophobic membrane wall in mild conditions when the p H value is ≥ 6.4. It has been found that these polymersomes can be successfully used to load anticancer drug Dox with the loading content of about 11.30 wt%. After the polymersome is rapidly internalized by the cell with the aid of PMCP, the loaded drug can be burst-released in endosomes since PDPA segment is protonated at low p H environment, which renders PDPA to transfer from hydrophobic to hydrophilic,and the subsequent polymersomes collapse thoroughly. Ultimately, the "proton sponge" effect of PDPA chain can further accelerate the Dox to escape from endosome to cytoplasm to exert cytostatic effects. Meanwhile, the cell viability assays showed that the Dox-loaded polymersomes exhibited significant inhibitory effect on tumor cells, indicating its great potential as a targeted intracellular delivery system with high efficiency.     

Metabolically Active,Fully Hydrolysable Polymersomes

The synthesis and aqueous self‐assembly of a new class of amphiphilic aliphatic polyesters are presented. These AB block polyesters comprise polycaprolactone (hydrophobe) and an alternating polyester from succinic acid and an ether‐substituted epoxide (hydrophile). They self‐assemble into biodegradable polymersomes capable of entering cells. Their degradation products are bioactive, giving rise to differentiated cellular responses inducing stromal cell proliferation and macrophage apoptosis. Both effects emerge only when the copolymers enter cells as polymersomes and their magnitudes are size dependent.     

Metabolically Active,Fully Hydrolysable Polymersomes

The synthesis and aqueous self‐assembly of a new class of amphiphilic aliphatic polyesters are presented. These AB block polyesters comprise polycaprolactone (hydrophobe) and an alternating polyester from succinic acid and an ether‐substituted epoxide (hydrophile). They self‐assemble into biodegradable polymersomes capable of entering cells. Their degradation products are bioactive, giving rise to differentiated cellular responses inducing stromal cell proliferation and macrophage apoptosis. Both effects emerge only when the copolymers enter cells as polymersomes and their magnitudes are size dependent.     

Preparation of gold microparticles using halide ions in bulk block copolymer phases via photoreduction

Gold microparticles were prepared from the gold salt in the solid bulk phase of a poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) block copolymer via a photoreduction process in the presence of halide ions. The shapes and sizes of the gold microparticles were found to be dependent on the types and amount of halide ions as well as the types of cations used due to the combined effects of the adsorption power and oxidative dissolution ability of the additives on gold surfaces. Gold nanorods were obtained when poly(ethylene oxide) was used instead of the block copolymer. This suggests that the poly(propylene oxide) (PPO) parts in the block copolymer are essential for the formation of gold microparticles, even though the degree of the direct interaction between the PPO blocks and gold salt is not significant.     

CO2‐Activated Reversible Transition between Polymersomes and Micelles with AIE Fluorescence

Fluorescent polymersomes with both aggregation‐induced emission (AIE) and CO₂‐responsive properties were developed from amphiphilic block copolymer PEG‐b‐P(DEAEMA‐co‐TPEMA) in which the hydrophobic block was a copolymer made of tetraphenylethene functionalized methacrylate (TPEMA) and 2‐(diethylamino)ethyl methacrylate (DEAEMA) with unspecified sequence arrangement. Four block copolymers with different DEAEMA/TPEMA and hydrophilic/hydrophobic ratios were synthesized, and bright AIE polymersomes were prepared by nanoprecipitation in THF/water and dioxane/water systems. Polymersomes of PEG₄₅‐b‐P(DEAEMA₃₆‐co‐TPEMA₆) were chosen to study the CO₂‐responsive property. Upon CO₂ bubbling vesicles transformed to small spherical micelles, and upon Ar bubbling micelles returned to vesicles with the presence of a few intermediate morphologies. These polymersomes might have promising applications as sensors, nanoreactors, or controlled release systems.