Synthesis and Characterization of New Light Emitter Symmetrical Phenoxazinium Salt and Its Potential Application as Sensor for Assessment of Hg2+

The sensitization of the excited triplet state of a novel symmetrical Bis(dialkylamino)phenoxazinium salt was developed in the presence of Hg²⁺. This effect was used to determine the concentration of Hg²⁺ in different water samples. The phenoxazinium salt sensor was characterized by different spectroscopic tools such as: UV, FTIR, NMR and fluorescence spectra. The sensor has an emission band at 347 nm in DMSO. Hg²⁺ in DMSO at pH 5.6 can remarkably quench the fluorescence intensity of the sensor at 347 nm and a new band was appeared at 436 nm due to the strong complex formation between Hg²⁺ and sensor. The quenching of the band intensity at 347 and the enhancement of the intensity of the new band at 436 were used to determine the Hg²⁺ in different waste water samples. The dynamic range found for the determination of Hg²⁺ concentration is 8.7?×?10^-10 – 1.4?×?10^-6 mol L^?1 with a detection limit of 5.8?×?10^?10 mol L^?1 and quantification detection limit of 1.8?×?10^-9 mol L^-1.     

Study on the Cofluorescence Effect of Europium (III)–Yttrium (III)–Balofloxacin–Sodium Dodecyl Sulfate System and Its Analytical Application

A new fluorescence enhancement phenomenon in the europium(III)–balofloxacin–sodium dodecyl sulfate system was observed when yttrium(III) was added. Based on this, a sensitive cofluorescence assay for the estimation of balofloxacin was established. Under the optimized conditions, the enhanced fluorescence signal was linear over the concentration of balofloxacin ranging from 3.0 × 10^?9 to 7.0 × 10^?6 mol L^?1 with a correlation coefficient of 0.9993. The detection limit (3 σ) was determined as 8.3 × 10^?10 mol L^?1. The presented method was successfully applied to determination of balofloxacin in pharmaceutical preparations, human serum, and urine. The possible fluorescence enhancement mechanism was also discussed.     

Spectroscopic Determination of Cysteine with Alizarin Red S and Copper

ABSTRACT

The interaction between metal complex Cu²⁺–ARS (Alizarin Red S) and l-cysteine was investigated via fluorescence and absorption spectroscopies. In pH 5.2 Britton–Robinson buffer, the addition of L-cysteine into Cu²⁺–ARS system resulted in a fluorescence enhancement because cysteine reduced Cu²⁺ to Cu⁺, which led to Cu²⁺–ARS decompound, and ARS was released. The result was also supported by absorption spectroscopy change. A good linear response of fluorescence intensity as a function of cysteine concentration was obtained ranging from 1.0 × 10^?6 to 4.0 × 10^?5 mol L^?1 with the detection limit as 1.08 × 10^?7 mol L^?1. The introduced method has high selectivity over other amino acids such as cystine, tyrosine, tryptophan, methionine, and glycine. It was applied to determine cysteine in protein hydrolysate of fresh pig blood with recovery of 88.4–100.2%.     

A Validated Spectrofluorimetric Method for the Determination of Citalopram in Bulk and Pharmaceutical Preparations Based on the Measurement of the Silver Nanoparticles-Enhanced Fluorescence of Citalopram/Terbium Complexes

A simple, sensitive, and accurate spectrofluorimetric method was developed for the determination of citalopram in bulk and pharmaceutical preparations. The method is based on the enhancement of the weak fluorescence signal (FL) of the Tb (III)-citalopram system in the presence of silver nanoparticles. Fluorescence intensities were measured at 555 nm after excitation at 281 nm. Prepared silver nanoparticles (AgNPs) were characterized by UV-Visible spectra and transmission electron microscopy (TEM). Various factors affecting the formation of citalopram-Tb (III)-AgNPs complexes were studied and optimized. The fluorescence intensity versus concentration plot was linear over the range 0.02–14 μg?mL^?1, with an excellent correlation coefficient of 0.9978. The limit of detection (LOD) and limit of quantification (LOQ) were found to be 7.15?×?10^?6?μg?mL^?1 and 2.38?×?10^?5?μg?mL^?1 respectively. The proposed method was found to have good reproducibility with a relative standard deviation of 3.66 % (n?=?6). The interference effects of common excipients found in pharmaceutical preparations were studied. The developed method was validated statistically by performing recoveries studies and successfully applied for the assay of citalopram in bulk powder and pharmaceutical preparations. Percent recoveries were found to range from 98.98 % to 100.97 % for bulk powder and from 96.57 % to 101.77 % for pharmaceutical preparations.     

Simultaneous Determination of Ritodrine and Isoxsuprine Using Coupling Technique of Synchronous Fluorimetry and H-Point Standard Addition Method

Simultaneous determination of two structurally related ß₂ adrenergic receptor agonists namely, Ritodrine HCl (RTH) and Isoxsuprine HCl (ISP) was performed using coupling technique of synchronous fluorimetry and H-point standard addition method. Under optimum conditions, linear determination ranges were 1.48 – 14.80?×?10^?6 mol L^?1 and 1.54 – 15.44?×?10^?6 mol L^?1 for ISP and RTH respectively. RTH and ISP could be determined simultaneously without interference from each other when their concentration ratio varies from 5:1 to 1:5 in the mixed sample. The proposed method was applied to the determination of RTH and ISP in synthetic mixture of pharmaceutical samples, the accuracy and precision of the results were satisfactory.     

Fluorescence Chemosensor for Determination of Carbon Dioxide and Its Application for Biodegradation Analysis of Polymers

A novel fluorescence sensor has been developed and applied for the determination of carbon dioxide released from the biodegradation of polymer materials and for the evaluation of the biodegradability of polymers. The proposed analytical method is based on the extraordinarily quenching effect of carbonate on fluorescence signal of N,N-diphenylthiourea system. Under the optimized experimental conditions, the fluorescence quenching system performed satisfactorily in a linear detection concentration ranging from 2.00 × 10^?4 to 9.00 × 10^?3 mol L^?1 of carbonate. The detection limit is 8.33 × 10^?5 mol L^?1 for carbonate. This proposed fluorescence system for the selective sensing of carbonate has been successfully applied to determine the biodegradability of polybutylene succinate and related polymers under controlled composting environment with devices assembled in our laboratory. The results exhibited that the biodegradation rate and final biodegradation percentage of biodegradable thermoplastic poly(ester urethane) elastomers, which embodies the block copolymer of poly(butylene succinate) with poly(diethylene glycol succinate), were correlated to the amount of poly(diethylene glycol succinate). In addition, the maximum biodegradation percentage of the testing polymers has reached 45.01%. This research demonstrates the development of chemosensors for rapid, selective, and sensitive detection of carbon dioxide is important and significant for both environmental and biological science.     

Synthesis and Analytical Application of a Novel Fluorescent Hg2+ Probe 3′, 6′-Bis(Diethylamino)-2-((2,4-Dimethoxybenzylidene)Amino)Spiro[Isoindoline-1,9′-Xanthene]-3-Thione

A novel probe, 3′,6′ - bis(diethylamino) -2- ((2,4-dimethoxybenzylidene)amino) spiro [isoindoline-1,9′-xanthene]-3-thione (RBS), was designed and synthesized. Its structure was characterized with elemental analysis, IR spectra and ¹H NMR. The probe displayed highly selective and sensitive recognition of Hg²⁺. Reacting with mercury ions in aqueous solution, its fluorescence intensity was enhanced significantly, while its color was changed from colorless to pink. So, a new fluorescence method of detection of Hg²⁺ was proposed. Its dynamic response concentration range and detection limit for Hg²⁺ were 5.00?×?10^?9 M to 1.00?×?10^?6 M detected and 1.83?×?10^?9 M, respectively. Satisfying results were obtained when the probe was applied to detect spiked Hg²⁺ in samples.     

Fluorescence Determination of Azithromycin in Pharmaceutical Formulations by Using the Synchronous Scanning Approach After its Acid Derivatization

In this present work, a fluorescence method for azithromycin (9-deoxo-9a-aza-9a-methyl-9a-homoerythromycin) determination in pharmaceutical formulations is proposed. The method is based on the synchronous fluorescence (Δλ?=?30 nm, 482 nm) produced when azithromycin is derivatized in strong acidic medium (9.0 mol L^?1 HCl). The influence of the derivatization conditions (acid concentration, reaction time and temperature) was studied. Also, the possible reaction mechanism was discussed. In the optimized conditions, the method presented a limit of detection of 0.23 mg L^?1 and a limit of quantification of 0.76 mg L^?1. The developed procedure was successfully applied in the determination of azithromycin in pharmaceutical formulations.     

Negative curvature dependent plasmonic coupling and local field enhancement of crescent silver nanostructure

In this contribution, novel luminescent gold nanoclusters were synthesized by utilizing bovine serum albumin as templates with a simple, rapid, and one-pot procedure. The as-prepared gold nanoclusters were highly dispersed in aqueous solution and emitted an intense red fluorescence under UV light (365?nm). They exhibited strong fluorescence and the maximum excitation and emission wavelengths were 480 and 613.5?nm. In addition, the bovine serum albumin-stabilized gold nanoclusters were successfully utilized as novel fluorescent probes for the detection of quercetin for the first time. It was found that the addition of quercetin induced the strong fluorescence intensity of the gold nanoclusters to decrease. The decrease in fluorescence intensity of the gold nanoclusters caused by quercetin allowed the sensitive detection of quercetin in the range of 8.9?×?10^?8?C1.8?×?10^?4?mol?L^?1. The detection limit for quercetin is 1.8?×?10^?8?mol?L^?1 at a signal-to-noise ratio of 3. The present sensor for quercetin detection possessed a low detection limit and wide linear range. In addition, the real samples were analyzed with satisfactory results.     

Spectrofluorimetric Determination of Nickel (ΙΙ) with Murexide

A very sensitive and selective spectrofluorimetric method has been developed for nickel (ΙΙ) determination in environmental samples. The method is based on measuring the decrease in fluorescence intensity of murexide after nickel (ΙΙ) binding. The intensity of the fluorescence emission peak was measured at ex/em 345/431 nm in several solutions with pH interval 3.0–7.0. The fluorescence intensity decrease was found to be linear in the concentration range of 0.007 mg.L^?1 to 0.1 mg.L^?1 and 0.1 mg.L^?1 to 20 mg.L^?1 of nickel (ΙΙ) by using 10^?4 M murexide at pH 3. The detection limit was found 0.004 mg.L^?1. Relatively large excesses of over 20 cations and anions do not interfere. The method was successfully applied to the analysis of nickel (ΙΙ) in sea, rain and ground water. This method is very precise and accurate (R.S.D.?=?0.42 % for the determination of 0.05 mg.L?¹ nickel in 10 replicates).     

A calix[4]arene derivative-doped perchlorate-selective membrane electrodes with/without multi-walled carbon nanotubes

In this study, poly (vinyl chloride)(PVC) membrane electrodes with/without multi-walled carbon nanotubes (MWCNTs) based on a calix[4]arene derivative for perchlorate ion were described. The influence of membrane composition, pH, conditioning solution on the potentiometric response of the electrodes was investigated. Perchlorate-selective PVC membrane electrode exhibited a slope of 47.8 ± 0.6 mV/pClO₄ in the range of 1.0 × 10^?7–1.0 × 10^?1 mol L^?1at pH 4.0 while the coated Pt electrodes with MWCNT-OH, MWCNT-COOH and MWCNT displayed slopes of 46.1 ± 0.7 mV/pClO₄ (5.0 × 10^?6–1.0 × 10^?1 mol L^?1), 50.4 ± 1.9 mV/pClO₄ (1.0 × 10^?6–1.0 × 10^?1 mol L^?1) and 44.4 ± 0.3 mV/pClO₄ (1.0 × 10^?5–1.0 × 10^?1 mol L^?1), respectively. Other response characteristics of these electrodes such as response time, lifetime and detection limit were identified, and the selectivity coefficients towards various anions were calculated by separate solution method. Moreover, the perchlorate-selective electrodes described here were successfully used as an indicator electrode for the determination of perchlorate in real samples such as tap water, river water and human urine by direct calibration method.     

The Co-luminescence Effect of Eu–Gd–Ofloxacin–SDBS System and its Analytical Application

A fluorescence enhancement phenomenon in the europium (Eu)–Ofloxacin (OF)–Sodium Dodecyl Benzene Sulfonate (SDBS) fluorescence system was observed when Gd³⁺ was added. The fluorescence intensity of the systems was measured (λ _ex/λ _em = 280/612 nm) at pH 7.8. Under optimum conditions, a linear relationship between the enhanced fluorescence intensity and the Eu³⁺ concentration in the range of 5.0 × 10⁻¹⁰ ∼ 2.0 × 10⁻⁷ mol·L⁻¹ was observed. The detection limit of Eu³⁺ was 1.46 × 10⁻¹⁰ mol·L⁻¹ (S/N = 3). This method was used for the determination of trace amounts of europium in synthetic rare earth samples with satisfactory results. In addition, the interaction mechanism is also studied.     

Fluorescent carbon dots: facile synthesis at room temperature and its application for Fe<Superscript>2+</Superscript> sensing

A new route for one-pot preparation of carbon dots (CDs) was developed at room temperature using PEG400 as both the carbon source and passitive agent. The new method possesses the advantages of facile, rapid, energy-saving, without any external stimulus and environment friendly. By changing the content of NaOH, the PEG400-CDs with blue-emitting, yellow-emitting, orange red-emitting and red-emitting were obtained, and the formation mechanism were carefully investigated. In addition, a sensitive fluorescence sensor were developed for Fe²⁺ detection based on PEG400-CDs since the fluorescence of PEG400-CDs could be enhanced by Fe²⁺. It was found that there is a good linear relationship between the enhanced fluorescence and Fe²⁺ concentration in the range of 0.5 to 2.0 μmol·L^?1 with the detection limit of 6.0 × 10^?8 mol·L^?1, and Fe²⁺ in water samples was also determined with high accuracy and repeatability.     

A selective sensor for nanolevel detection of lead (II) in hazardous wastes using ionic-liquid/Schiff base/MWCNTs/nanosilica as a highly sensitive composite

An effective potentiometric sensor had been fabricated for the rapid determination of Pb²⁺ based on carbon paste electrode consisting of room temperature ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM-PF₆), multiwalled carbon nanotubes (MWCNTs), nanosilica, synthesized Schiff base, as an ionophore, and graphite powder. The constructed nanocomposite electrode showed better sensitivity, selectivity, response time, response stability, and lifetime in comparison with typical Pb²⁺ carbon paste electrode for the successfully determination of Pb²⁺ ions in water and in waste water samples. The best response for nanocomposite electrode was obtained with electrode composition of 18% ionophore, 20% BMIM-PF₆, 49% graphite powder, 10% MWCNT, and 3% nanosilica. The new electrode exhibited a Nernstian response (29.76?±?0.10 mV decade^?1) toward Pb²⁺ ions in the range of 5?×?10^?9?C1.0?×?10^?1 mol L^?1 with a detection limit of 2.51?×?10^?9 mol L^?1. The potentiometric response of prepared sensor is independent of the pH of test solution in the pH range of 4.5?C8.0. It has quick response with response time of about 6 s. The proposed electrode show fairly good selectivity over some alkali, alkaline earth, transition, and heavy metal ions.     

A Novel Pyrene Fluorescent Sensor Based on the π–π Interaction Between Pyrene and Graphene of Graphene–Cadmium Telluride Quantum Dot Nanocomposites

In this article, water-soluble graphene–cadmium telluride quantum dot nanocomposites were fabricated through the synthesis of cadmium telluride quantum dots in the presence of graphene aqueous dispersion. It was found that pyrene could remarkably quench fluorescence of graphene–cadmium telluride quantum dot nanocomposites. On this basis, a novel method for the determination of pyrene was developed. Factors affecting the pyrene detection were investigated, and the optimum conditions were determined. Under the optimum conditions, a linear relationship could be established between the quenching of fluorescence intensity of graphene–cadmium telluride quantum dot nanocomposites and the pyrene concentration in the range of 6.00 × 10^?8–2.00 × 10^?6 mol L^?1 with a correlation coefficient of 0.9959. The detection limit was 4.02 × 10^?8 mol L^?1. Furthermore, the nanocomposites were applied to practical determination of pyrene in different water samples with satisfactory results.     

Study on the Interaction Between Oxymatrine and Tungstosilicic Acid by Resonance Rayleigh Scattering and Its Analytical Applications

In the 0.1 mol · L^?1 hydrochloric acid solution, oxymatrine reacted with tungstosilicic acid to form a 2:1 ion-association complexes. This results in a great enhancement of resonance Rayleigh scattering. The maximum resonance Rayleigh scattering wavelength was located at 393 nm. Resonance Rayleigh scattering intensity was proportional to the concentration of oxymatrine in the range of 1.5–26.4 µg · mL^?1, and the detection limit (3σ) was 0.23 µg · mL^?1. The optimum conditions and the effects of coexisting substances on the reaction were investigated. The method shows a wide linear range and high sensitivity, and was applied to the determination of oxymatrine in marine capsules and human urine samples with satisfactory results. Therefore, a highly sensitive, simple, and quick method has been developed for the determination of oxymatrine.     

Supramolecular Study on the Interaction Between Ofloxacin and Methyl β-Cyclodextrin by Fluorescence Spectroscopy and its Analytical Application

The supramolecular interaction of ofloxacin (Oflo) and methyl β-cyclodextrin (Mβ-CD) has been examined by UV–vis, IR and fluorescence spectroscopy. The formation of inclusion complex has been confirmed based on the changes of the spectral properties. The results showed that Mβ-CD reacted with Oflo to form an inclusion complex. The Oflo and Mβ-CD complex formed a host-guest complex in 1:1 stoichiometry and inclusion constant (K?=?7.8?×?10^?3 L mol^?1) was ascertained by the typical double reciprocal plots. Furthermore, the thermodynamic parameters (?H°, ?S° and ?G°) associated with the inclusion process were also determined. In addition, solid inclusion complex was synthesized. Based on the significant enhancement of the fluorescence intensity of Oflo produced through complex formation, a simple, accurate, rapid and highly sensitive spectrofluorometric method for the determination of Oflo in pharmaceutical formulation was developed. The measurement of relative fluorescence intensity was carried out at 497 nm with excitation at 296 nm. The factors affecting the inclusion complex formation were studied and optimized. Under the optimum reaction conditions, linear relationships with good correlation coefficients (0.9995) were in the concentration range of 50–350 ng/mL for spectrofluorimetry. The limit of detection (LOD) was 11.5 ng/mL. The proposed method was successfully applied to the analysis of Oflo in pharmaceutical preparation.     

A Carbazole-Fused-RhodamineProbe for Detection of HOCl in Living Cells

A novel fluorescent probe CR-ClO for detection of HOCl based on a carbazole fused rhodamine was designed and synthesized. The probe utilized a HOCl-promoted oxidation reaction, which lead to the ring opening of the compound with a strong enhancement of the fluorescent emission at about 587 nm.The new probe CR-ClO has excellent selectivity and high sensitivity to ClO^?,whose detection limit to ClO^? is 1.16 × 10^?6 M. Furthermore, the new probe has been successfully applied in living cells for detection of ClO^?.     

Synthesis and Evaluation of a Schiff-Based Fluorescent Chemosensors for the Selective and Sensitive Detection of Cu<Superscript>2+</Superscript> in Aqueous Media with Fluorescence Off-On Responses

Copper being an essential nutrient; also pose a risk for human health in excessive amount. A simple and convenient method for the detection of trace amount of copper was employed using an optical probe R1 based on Schiff base. The probe was synthesized by Schiff base condensation of benzyl amine and 2-hydroxy-1-napthaldehyde and characterized by single X-ray diffraction, ¹H NMR and FTIR. By screening its fluorescence response in a mixture of DMSO and H₂O (20:80, v/v) R1 displayed a pronounced enhancement in fluorescence only upon treatment with copper. Other examined metal ions such as alkali, alkaline and transition had no influence. Within a wide pH range 5–12 R1 could selectively detect copper by interrupting ICT mechanism that results in CHEF. From Job’s plot analysis a 2:1 binding stoichiometry was revealed. The fluorescence response was linear in the range 1–10?×?10^?9 M with detection limit 30?×?10^?9 M. Association constant was determined as 1?×?10¹¹ M^?2 by Benesi-Hilderbrand plot. As a fast responsive probe it possesses good reproducibility and was employed for detection of copper in different water samples.     

Voltammetric behaviors of an emerging pollutant benzotriazole on multiwall carbon nanotubes (MWNTs)—Nafion modified electrode in various pH mediums

The electrochemical behaviors of an emerging pollutant, benzotriazole (BTA), at multiwall carbon nanotubes and Nafion modified glassy carbon electrode (MWNTs-Nafion/GCE) were investigated systematically. The electrochemical reduction of BTA was significantly improved by MWNTs-Nafion compared to bare GCE, ascribed to the excellent adsorption capacity and electrocatalytic activity of MWNTs. BTA presented well-defined reduction peaks only at pH <3.0, suggesting the involvement of lots of protons in the reduction process. Peak potential shifted negatively and peak current decreased significantly with pH increase. BTA showed various UV–Vis absorption spectra in acidic and alkaline mediums. Cathodic peak current increased linearly with square root of sweep rate as well as with the concentration of BTA from 3.0?×?10^?6 to 1.6?×?10^?4 mol L^?1. This suggests a diffusion-controlled and irreversible electrode process. Diffusion coefficient of BTA on MWNTs-Nafion/GCE was obtained as 2.67?×?10^?2 cm² s^?1 with four orders of magnitude larger than that on GCE. MWNTs-Nafion/GCE showed a good selectivity between BTA and O₂ but poor selectivity between BTA and tolyltriazole.