A study on optical,photoluminescence and thermoluminescence properties of ZnO and Mn doped-ZnO nanocrystalline particles

Pure ZnO and Mn (1%wt.) doped-ZnO nanocrystalline particles were synthesized by reverse micelle method. The structural properties of the nanoparticles were investigated by X-Ray Diffraction (XRD) and Transmission Electron Microscopy (TEM) techniques. UV–vis and photoluminescence (PL) spectroscopy was used for analyzing the optical properties of the nanoparticles. XRD and TEM results revealed the formation of ZnO and Mn doped-ZnO nanocrystalline particles with pure wurtzite crystal structure and average particle size of 18–21 nm. From UV–vis studies, the optical band gap energy of 3.53 and 3.58 eV obtained for ZnO and Mn doped-ZnO nanoparticles, respectively. Further optical analysis showed that the refractive index decreases from 2.35 to 1.35 with the change of wavelength. Room-temperature photoluminescence analysis of all samples showed four main emission bands including a strong UV emission band, a weak blue band, a week blue–green band, and a weak green band which indicated their high structural and optical quality. Moreover, the samples exposed to gamma rays sources of ¹³⁷Cs and ⁶⁰Co and their thermoluminescence properties were investigated. The thermoluminescence response of ZnO and Mn doped-ZnO nanocrystalline particles as a function of dose exhibited good linear ranges, which make them very promising detectors and dosimeters suitable for ionizing radiation.     

Effect of Mn doping on the structural and optical properties of sol-gel derived ZnO nanoparticles

Un-doped and Mn-doped ZnO nanoparticles were successfully synthesized in an ethanolic solution by using a sol-gel method. Material properties of the samples dependence on preparation conditions and Mn concentrations were investigated while other parameters were controlled to ensure reproducibility. It was observed that the structural properties, particle size, band gap, photoluminescence intensity and wavelength of maximum intensity were influenced by the amount of Mn ions present in the precursor. The XRD spectra for ZnO nanoparticles show the entire peaks corresponding to the various planes of wurtzite ZnO, indicating a single phase. The diffraction peaks of doped samples are slightly shifted to lower angles with an increase in the Mn ion concentration, signifying the expansion of the lattice constants and increase in the band gap of ZnO. All the samples show the absorption in the visible region. The absorbance spectra show that the excitonic absorption peak shifts towards the lower wavelength side with the Mn-doped ZnO nanoparticles. The PL spectra of undoped ZnO consist of UV emission at 388 nm and broad visible emission at 560 nm with varying relative peak intensities. The doping of ZnO with Mn quenches significantly the green emission while UV luminescence is slightly affected.     

Effect of doping and annealing on the physical properties of ZnO:Mg nanoparticles

Well-dispersed undoped and Mg-doped ZnO nanoparticles with different doping concentrations at various annealing temperatures are synthesized using basic chemical solution method without any capping agent. To understand the effect of Mg doping and heat treatment on the structure and optical response of the prepared nanoparticles, the samples are characterized using X-ray diffraction (XRD), energy-dispersive X-ray (EDX), UV–Vis optical absorption, photoluminescence (PL), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) measurements. The UV–Vis absorbance and PL emission show a blue shift with increasing Mg doping concentration with respect to bulk value. UV–Vis spectroscopy is also used to calculate the band-gap energy of nanoparticles. X-ray diffraction results clearly show that the Mg-doped nanoparticles have hexagonal phase similar to ZnO nanoparticles. TEM image as well as XRD study confirm the estimated average size of the samples to be between 6 and 12 nm. Furthermore, it is seen that there was an increase in the grain size of the particles when the annealing temperature is increased.     

Effect of barium doping on the physical properties of zinc oxide nanoparticles elaborated via sonochemical synthesis method

The aim of this work is to study the effect of barium (Ba) doping on the optical, morphological and structural properties of ZnO nanoparticles. Undoped and Ba-doped ZnO have been successfully synthesized via sonochemical method using zinc nitrate, hexamethylenetetramine (HMT) and barium chloride as starting materials. The structural characterization by XRD and FTIR shows that ZnO nanoparticles are polycrystalline with a standard hexagonal ZnO wurtzite crystal structure. Decrease in lattice parameters from diffraction data shows the presence of Ba²⁺ in the ZnO crystal lattice. The morphology of the ZnO nanoparticles has been determined by scanning electron microscopy (SEM). Incorporation of Ba was confirmed from the elemental analysis using EDX. Optical analysis depicted that all samples exhibit an average optical transparency over 80%, in the visible range. Room-temperature photoluminescence (PL) spectra detected a strong ultraviolet emission at 330 nm and two weak emission bands were observed near 417 and 560 nm. Raman spectroscopy analysis of Ba-doped samples reveals the successful doping of Ba ions in the host ZnO.     

Optical properties of ZnO nanoparticles synthesized by varying the sodium hydroxide to zinc acetate molar ratios using a Sol-Gel process

Material property dependence on the OH⁻/Zn²⁺ molar ratio of the precursor was investigated by varying the amount of NaOH during synthesis of ZnO. It was necessary to control the water content and temperature of the mixture to ensure the reproducibility. It was observed that the structural properties, particle size, photoluminescence intensity and wavelength of maximum intensity were influenced by the molar ratio of the precursor. The XRD spectra for ZnO nanoparticles show the entire peaks corresponding to the various planes of wurtzite ZnO, indicating a single phase. UV measurements show the absorption that comes from the ZnO nanoparticles in visible region. The absorption edge of these ZnO nanoparticles are shifted to higher energies and the determined band gap energies are blue shifted as the OH⁻/Zn² molar ration increases, due to the quantum confinement effects. The photoluminescence characterization of the ZnO nanostructures exhibited a broad emission band centred at green (600 nm) region for all molar ratios except for OH⁻/Zn²⁺ = 1.7 where a second blue emission around 468 nm was also observed. The photoluminescence properties of ZnO nanoparticles were largely determined by the size and surface properties of the nanoparticles.     

Effect of Mn doping on the microstructures and photoluminescence properties of CBD derived ZnO nanorods

Mn-doped ZnO nanorods were synthesized from aqueous solutions of zinc nitrate hexahydrate, manganese nitrate and methenamine by the chemical solution deposition method (CBD). Their microstructures, morphologies and optical properties were studied in detail. X-ray diffraction (XRD) results illustrated that all the diffraction peaks can be indexed to ZnO with the hexagonal wurtzite structure. Scanning electron microscope (SEM) results showed that the average diameter of Mn-doped ZnO nanorods was larger than that of the undoped one. Photoluminescence (PL) spectra indicated that manganese doping suppressed the emission intensity and caused the blue shift of UV emission position compared with the undoped ZnO nanorods. In the Raman spectrum of Mn-doped ZnO nanorods, an additional mode at about 525 cm⁻¹ appeared which was significantly enhanced and broadened with the increase of Mn doping concentration.     

Synthesis and optical properties of nanocrystalline ZnO powders prepared by a direct thermal decomposition route

This paper reports the synthesis and optical properties of nanocrystalline ZnO powders with crystallite sizes of 32.5 (±1.4)–43.4 (±0.4) nm prepared by a direct thermal decomposition of zinc acetate at the temperatures of 400, 500, 600, and 700°C for 4 h. The structure of the prepared samples was studied by XRD and FTIR spectroscopy, confirming the formation of wurtzite structure. The morphology of the samples revealed by SEM was affected by the thermal decomposition temperature, causing the formations of both nanoparticles and nanorods with different size and shape in the samples. The synthesized powders exhibited the UV absorption below 400 nm (3.10 eV) with a well defined absorption peak at around 285 nm (4.35 eV). The estimated direct bandgaps were obtained to be 3.19, 3.16, 3.14, and 3.13 eV for the ZnO samples thermally decomposed at 400, 500, 600, and 700°C, respectively. All the samples exhibited room-temperature photoluminescence (PL) showing a strong UV emission band at ∼395 nm (3.14 eV), a weak blue band at ∼420 nm (2.95 eV), a blue–green band at ∼485 nm (2.56 eV), and a very weak green band at ∼529 nm (2.35 eV). The mechanisms responsible for photoluminescence of the samples are discussed.     

Synthesis and characterization of zinc oxide nanoparticles: application to textiles as UV-absorbers

We report the synthesis and characterization of nanosized zinc oxide particles and their application on cotton and wool fabrics for UV shielding. The nanoparticles were produced in different conditions of temperature (90 or 150 °C) and reacting medium (water or 1,2-ethanediol). A high temperature was necessary to obtain small monodispersed particles. Fourier transformed infrared spectroscopy (FTIR), transmission electron microscopy (TEM), and X-ray powder diffractometry (XRD) were used to characterize the nanoparticles composition, their shape, size and crystallinity. The specific surface area of the dry powders was also determined. ZnO nanoparticles were then applied to cotton and wool samples to impart sunscreen activity to the treated textiles. The effectiveness of the treatment was assessed through UV–Vis spectrophotometry and the calculation of the ultraviolet protection factor (UPF). Physical tests (tensile strength and elongation) were performed on the fabrics before and after the treatment with ZnO nanoparticles.     

Highly concentrated zinc oxide nanocrystals sol with strong blueemission

Highly concentrated ZnO sol was synthesized by an improved sol-gel method. Water was used as a modifier to control the sol-gel reaction and provide a way to increase the sol concentration. Concentration of ZnO in the prepared sol is higher than from other methods. Optical absorption and photoluminescence were used to investigate optical properties of the prepared sol. FTIR test was performed to study the influence of water on the compounds of as-prepared sol. The size and morphology of ZnO nanoparticles have been studied by HRTEM. The prepared colloidal ZnO nanocrystals have narrow size distribution (5-8 nm) and showed strong blue emission. The prepared sol has enough potential for optoelectronic applications.     

Effective growth and characterization of piperazinium orthophthalate single crystal yielding high second harmonic generation efficiency

Good quality organic non-linear optical single crystal of piperazinium orthophthalate (PPA) was grown successfully by solution growth at room temperature by achieving the supersaturation state in slow evaporation method. The powder XRD analysis confirms the crystalline nature and structural parameters of the grown PPA crystal. The FTIR and Raman spectra confirm the existence of acid-base functional groups along with their vibrational mode exhibited, present in the grown PPA crystal. UV–Vis spectrum exhibits better transparency in the visible region with cut-off wavelength of 330 nm and the energy band gap (E_g) is analyzed to be 3.8 eV. Photoluminescence spectra shows good optical property with the excitation of 342 nm and two emission peaks in near edge UV band with blue emission at 364 and the energy transition in deep level defect states in crystals by exhibiting the green emission at 533 nm respectively. The thermal stability and the thermal absorption of the PPA crystal were identified by the TG - DTA analysis and obtained thermal stability was up to 88 °C. Vickers micro hardness test illustrates the mechanical stability of the grown PPA crystal and it belong to soft category (n = 4.6). Etching studies illustrates the growth pattern of the grown crystal using water as etchant. FE-SEM analysis shows the perfect smooth morphology of the grown PPA crystal. Second harmonic generation study illustrates the grown PPA crystal (λ = 532 nm) exhibit good nonlinear optical response.     

Characterization and optical property of ZnO nano-, submicro- and microrods synthesized by hydrothermal method on a large-scale

In the present paper, well-dispersed ZnO nano-, submicro- and microrods with hexagonal structure were synthesized by a simple low temperature hydrothermal process from zinc nitrate hexahydrate without using any additional surfactant, organic solvent or catalytic agent. The phase and structural analysis were carried out by X-ray diffraction (XRD), the morphological analysis was carried out by field emission scanning electron microscopy (FESEM) and the optical property was characterized by room-temperature photoluminescence (PL) spectroscopy. The results revealed the high crystal quality of ZnO powder with hexagonal (wurtzite-type) crystal structure and the formation of well-dispersed ZnO nano-, submicro- and microrods with diameters of about 50, 200 and 500 nm, and lengths of 300 nm, 1 μm and 2 μm, respectively, on a large-scale just using the different temperatures. Room-temperature PL spectrum from the ZnO nanorods reveals a strong UV emission peak at about 360 nm and no green emission band at ∼530 nm. The strong UV photoluminescence indicates the good crystallization quality of the ZnO nanorods. Room-temperature PL spectra from the ZnO submicro- and microrods reveal a weak UV emission peak at ∼400 nm and a very strong visible green emission at 530 nm, that is ascribed to the transition between V_oZn_i and valence band.     

Effect of Fe-doping on the structural,morphological and optical properties of ZnO nanoparticles synthesized by solution combustion process

The effect of Fe-doping on the structural, morphological and optical properties of ZnO nanoparticles synthesized by simple solution combustion process are reported. The powder XRD pattern indicates that the Fe-doped ZnO samples exhibit primary and secondary phases. The primary phase indicates the hexagonal wurtzite structure with the average crystalline size of around 25–50 nm and the secondary phase is associated with the face centered cubic structure of magnetite iron oxide. The elemental composition of pure and Fe-doped samples are evaluvated by EDX. The results of FE-SEM and HR-TEM cleary show that particles morphology have changed with respect to the incorporation of doping agent and particles are in aggregating nature. The vibrational properties of the synthesized ZnO nanoparticles are investigated by Raman scattering technique and it exhibits that the influence of Fe-doping significantly modify the lattice vibrational characteristics in ZnO sites. The optical properties of the Fe-doped ZnO nanoparticles are carried out by UV–vis absorption and PL spectra. The results of PL spectra show the near-band edge related emission as well as strong blue emissions in the Fe-doped ZnO nanoparticles.     

Preparation and investigation of optical, structural, and morphological properties of nanostructured ZnO:Mn thin films

Nanostructured ZnO:Mn thin films have been prepared by sol–gel dip coating method. The content of Mn in the sol was varied from 0 to 12 wt%. The effect of Mn concentration on the optical, structural, and morphological properties of ZnO thin films were studied by using Fourier Transform Infrared (FTIR), UV–visible and photoluminescence (PL) spectroscopy, X-ray diffraction (XRD) and Scanning Electron Microscopy (SEM). XRD results showed that the films have hexagonal wurtzite structure at lower content of Mn. The diffraction peaks corresponding to ZnO disappeared and two diffraction peaks of MnO₂ and Mn₃O₄ appeared at the highest value of doping concentration (viz., 12 wt%). SEM results revealed that the surface smoothness of the films improved at higher content of Mn. The optical band gap of the films decreased from 3.89 to 3.15 eV when the Mn concentration increased from 0 to 12 wt%. The PL spectra of the films showed the characteristic peaks linked to band-to-band, green and yellow emissions. Besides, the PL intensity of the samples decreased with increase in Mn concentration.     

Mn doped ZnO nanostructured thin films prepared by ultrasonic spray pyrolysis method

Mn-doped ZnO thin films with different percentage of Mn content (0, 1, 3 and 5 at.%) and substrate temperature of 350 °C, were deposited by a simple ultrasonic spray pyrolysis method under atmospheric pressure. We have studied the structural and optical properties by using X-ray diffraction (XRD), Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR) and ultra-violet visible near infrared (UV–Vis-NIR) spectroscopy. The lattice parameters calculated for the Mn-doped ZnO from XRD pattern were found to be slightly larger than those of the undoped ZnO, which indicate substitution of Mn in ZnO lattice. Compared with the Raman spectra for ZnO pure films, the Mn-doping effect on the spectra is revealed by the presence of additional peak around 524 cm⁻¹ due to Mn incorporation. With increasing Mn doping the optical band gap increases indicating the Burstein–Moss effect.     

High UV absorption efficiency of nanocrystalline ZnO synthesized by ultrasound assisted wet chemical method

Ultrasound assisted wet-chemical method has been carried out to incorporate different metal and non-metal ions such as; Li, S and Ag into ZnO. Characteristic studies on the structural and optical properties of the samples especially; the ultra-violet (UV) light absorption have been carried out. X-ray diffraction (XRD) analysis shows the formation of hexagonal crystal structure of ZnO along with changes in crystallinity and micro-strain with impurity doping. The morphology of the doped samples changes from particle like structure to flower and rod like structures showing the influence of dopant ions on nano ZnO growth. Infra-red (IR) transmittance spectra give information about the presence of metal–oxygen bond along with other stretching and bending modes. UV–visible absorption studies show the narrowing and sharpening of UV absorption band along with a blue shift for the doped samples. This shows the intensification in the excitonic absorption in ZnO after doping specific elements which will find application in UV blocking agents. Photoluminescence (PL) measurement shows the presence of excitonic emission and emissions due to intrinsic defects and external impurities in UV and visible regions respectively. These emission bands show a change in their position and intensity which has been explained on the basis of the existence of impurity levels in the band gap of ZnO.     

Carbon quantum dots supported ZnO sphere based photocatalyst for dye degradation application

A Carbon quantum dots supported ZnO hollow Sphere (ZnO/C-dots) were synthesized through a solvothermal method using polyethylene glycol 400 (PEG 400) as a solvent. The phase and crystal structure of as-prepared ZnO/C-dots photocatalyst were characterized by powder X-ray diffraction (XRD). The surface morphology and size of the composite were analyzed using field emission scanning microscopy (FE-SEM). The optical properties of the as-prepared nanocomposites were examined using UV–visible (UV–Vis) spectrometer. The photocatalytic activity of pure ZnO and ZnO/C-dots nanocomposites were evaluated by the degradation of methylene blue (MB) under UV–Visible light irradiation. The ZnO/C-dots nanocomposites exhibited maximum photocatalytic MB dye degradation efficiency of 96% which is much higher that the pure ZnO (63%). The enhanced photocatalytic activity of ZnO/C-dots is due to the extended light absorption in the visible region and suppressed photoexcited electron-hole pair recombination rate. Moreover, the activity of photocatalyst after five cycles exhibits high stability, which is vital for the sustainable photocatalytic procedures. It is concluded that the prepared ZnO/C-dots composite have low cost, good stability and has a great potential application for Photocatalytic dye degradation.     

Synthesis and characterization of Mn<Superscript>2+</Superscript>-doped ZnS nanoparticles

Mn²⁺-doped ZnS nanoparticles were prepared by chemical arrested precipitation method. The samples were heated at 300, 500, 700 and 900°C. The average particle size was determined from the X-ray line broadening. Samples were characterized by XRD, FTIR and UV. The composition was verified by EDAX spectrum. The hexagonal structure of the sample was identified. The size of the particles increased as the annealing temperature was increased. The crystallite size varied from 5 nm to 34 nm as the calcination temperature increased. At around 700°C, ZnS is converted into ZnO phase due to oxidation. The emission peak of the sample is observed at 300 nm resulting in blue emission. The solid state theory based on the delocalized electron and hole within the confined volume can explain the blue-shifted optical absorption spectra. UV-VIS spectro-photometric measurement shows an indirect allowed band gap of 3.65 eV.      

Effect of swift heavy ion irradiation on photoluminescence properties of ZnO/PMMA nanocomposite films

We report a study on the SHI induced modifications on structural and optical properties of ZnO/PMMA nanocomposite films. The ZnO nanoparticles were synthesized by the chemical route using 2-mercaptoethanol as a capping agent. The structure of ZnO nanoparticles was confirmed by XRD, SEM and TEM. These ZnO nanoparticles were dispersed in the PMMA matrix to form ZnO/PMMA nanocomposite films by the solution cast method. These ZnO/PMMA nanocomposite films were then irradiated by swift heavy ion irradiation (Ni⁸⁺ ion beam, 100 MeV) at a fluence of 1×10¹¹ ions/cm². The nanocomposite films were then characterized by XRD, UV-vis absorption spectroscopy and photoluminescence spectroscopy. As revealed from the absorption spectra, absorption edge is not changed by the irradiation but the optical absorption is increased. Enhanced green luminescence at about 527 nm and a less intense blue emission peak around 460 nm were observed after irradiation with respect to the pristine ZnO/PMMA nanocomposite film.     

Cesium doped and undoped ZnO nanocrystalline thin films: a comparative study of structural and micro‐Raman investigation of optical phonons

Undoped and cesium‐doped zinc oxide (ZnO) thin films have been deposited on sapphire substrate (0001) using the sol–gel method. Films were preheated at 300 °C for 10 min and annealed at 600 and 800 °C for 1 h. The grown thin films were confirmed to be of wurtzite structure using X‐ray diffraction. Surface morphology of the films was analyzed using scanning electron microscopy. The photoluminescence (PL) spectra of ZnO showed a strong ultraviolet (UV) emission band located at 3.263 eV and a very weak visible emission associated with deep‐level defects. Cesium incorporation induced a blue shift of the optical band gap and quenching of the near‐band‐edge PL for nanocrystalline thin film at room temperatures because of the band‐filling effect of free carriers. A shift of about 10–15 cm⁻¹ is observed for the first‐order longitudinal‐optical (LO) phonon Raman peak of the nanocrystals when compared to the LO phonon peak of bulk ZnO. The UV resonant Raman excitation at RT shows multiphonon LO modes up to fifth order. Copyright © 2010 John Wiley & Sons, Ltd.     

Fabrication and characterization chitosan/functionalized zinc oxide bionanocomposites and study of their antibacterial activity

This study deals with preparation and evaluation of properties of chitosan/zinc oxide bionanocomposites (CT/ZnO BNCs) with different amounts of modified zinc oxide nanoparticles (ZnO NPs) through ultrasonic irradiation technique. Due to the high surface energy and tendency for agglomeration, the surface ZnO NPs was modified by a coupling agent as 3-aminopropyltriethoxysilane (APS) to form APS–ZnO nanoparticles. Fourier transform infrared (FTIR) spectroscopy confirmed that APS was successfully grafted onto the ZnO nanoparticles surface. Thermogravimetric analysis (TGA) revealed a surface coverage of the coupling molecule of 2.6 wt%. The resulting bionanocomposites were characterized by FTIR spectra, X-ray diffraction patterns, and TGA. The antibacterial activity of bionanocomposite films was tested against gram-positive bacteria (Staphylococcus aureus and Bacillus subtilis) and gram-negative bacteria (Escherichia coli and Pseudomonas aeruginosa). The results of CT/ZnO BNCs revealed that the thermal and antibacterial properties obviously improved the presence of ZnO NPs in comparison with the pure CT and that this increase is higher when the NP content increases. Further, it was observed that antibacterial activity of the resulting hybrid biofilms showed somewhat higher for gram-positive bacteria compared to gram-negative bacteria.