The sublimation of argon, krypton, and xenon

In this paper, the sublimation pressure of Ar, Kr, and Xe are obtained as functions of temperature from an exactly integrated form of the Clapeyron equation. No fitting to experimental data of the equilibrium pressure has been necessary. The deviation plots of the sublimation pressure show that the results are satisfactory. The derived enthalpy of sublimation of the three rare gases from T = 0 K up to their respective triple point temperatures are asymmetric, distorted parabolas showing maxima for . The , which is a measure of the cohesion energy of the solid crystals, is easily calculated. A general equation has been obtained for as a function of temperature which also gives the enthalpies of sublimation of neon and radon. The (s + ? + g) triple point coordinates of Rn are reassessed.     

Thermodynamic studies on the interactions of diglycine with magnesium chloride in aqueous medium at different temperatures

Apparent molar heat capacities (C_P2,?), apparent molar volumes (V_2,?), and viscosities (η) of diglycine in water and in aqueous magnesium chloride (MgCl₂) solutions of molality m_S ≈ (0.05 to 0.70) mol · kg⁻¹ over the temperature range T = (288.15 to 328.15) K have been determined using high sensitivity micro-differential scanning calorimeter, vibrating-tube digital density meter, and automatic viscosity measuring unit (AVS 350), respectively. The data have been used to calculate the partial molar heat capacities and partial molar volumes at infinite dilution. The viscosity B-coefficients have also been obtained from viscosity data using Jones-Dole equation. The and values of diglycine in aqueous MgCl₂ solutions are higher than those in water and thus exhibit positive transfer functions ( and ), which are indicative of strong interactions between diglycine and MgCl₂. Corresponding viscosity B-coefficients of transfer are also generally positive. The transfer functions decrease with increase in temperature and increase with the concentration of MgCl₂. The free energies, enthalpies and entropies of activation for viscous flow of diglycine in aqueous MgCl₂ solutions have been obtained by using the Feakins transition-state theory. Partial molar expansibilities and at infinite dilution along with their temperature dependence, the interaction coefficients from the volume, heat capacity, and viscosity B-coefficients have been used to divulge the various kinds of plausible interactions between solute (diglycine) and cosolute (MgCl₂) in solutions.     

Determination of chromium, cadmium and lead in food-packaging materials by axial inductively coupled plasma time-of-flight mass spectrometry

Inductively coupled plasma mass spectrometry (ICP-MS) with a time-of-flight (TOF) analyser was used for the determination of chromium, cadmium and lead in six food-packaging materials (paper and paper board). The samples (0.20-0.25 g) were digested in concentrated nitric acid in a high pressure microwave oven at 180 °C within 15 min. Two different plasma conditions were applied: cool plasma conditions (0.76 kW; 0.85, 0.89 and 15.5 l min⁻¹ nebuliser, auxiliary and plasma gas flow rate, respectively) for the determination of chromium and normal plasma conditions (1.21 kW; 0.66, 0.68 and 13.6 l min⁻¹ nebuliser, auxiliary and plasma gas flow rate, respectively) for the determination of cadmium and lead. External calibration was used in combination with rhodium (40 ng g⁻¹) as an internal standard. The detection limits (DL = 3S.D./sensitivity) under the conditions used corresponded to 0.01 ng g⁻¹ (), 0.06 ng g⁻¹ (), 0.07 ng g⁻¹ (), 0.03 ng g⁻¹ () and 0.02 ng g⁻¹ ( and ). The precision (R.S.D.) for six replicate determinations (10 s integration time) of 1 and 10 ng g⁻¹ of each analyte varied from 0.72% () to 4.43% (). The contents of chromium, cadmium and lead in the examined materials were evaluated using the signals of , and . They were in the range: 0.25-0.50 μg g⁻¹ for Cr, not detected (nd) to 0.12 μg g⁻¹ for Cd and 0.28-0.35 μg g⁻¹ for Pb in paper and 0.50-0.64 μg g⁻¹ for Cr, nd to 0.09 μg g⁻¹ for Cd and 0.67-0.99 μg g⁻¹ for Pb in paper board.     

Determination of arsenic, iron and selenium in moss samples using hexapole collision cell, inductively coupled plasma-mass spectrometry

Different collision gases (H₂, He and premixed 7% H₂ in He) used in the hexapole collision cell of an inductively coupled plasma-mass spectrometer (ICP-MS) were compared, and the gas-flow rates were optimized for the determination of arsenic (), iron () and selenium (). The study showed that the argon-based interferences at mass-to-charge ratios (m/z) of 56, 75 and 80 can be overcome by the optimized gas flows (7.5 ml min⁻¹ premixed 7% H₂ in He and 2 ml min⁻¹ H₂) in the hexapole collision cell. Detection limits of 15.5 ng l⁻¹ for iron () and 29 ng l⁻¹ for selenium () in 2% (v/v) HNO₃ were obtained under optimized collision cell conditions. The detection limit for arsenic () obtained in difficult hydrochloride acid matrix (5% HCl (v/v)) was 153 ng l⁻¹. The accuracy of the optimized method was confirmed by analyzing two moss reference materials. The results obtained by ICP-MS for arsenic, selenium and iron from both moss reference samples were, in most cases, in good agreement with the certified values.     

Synthesis, crystal structure and optical properties of BiMgVO5

The new vanadate BiMgVO₅ has been prepared and its structure has been determined by single crystal X-ray diffraction: space group P2₁/n, , , , β=107.38(5)°, wR₂=0.0447, R=0.0255. The structure consists of [Mg₂O₁₀] and [Bi₂O₁₀] dimers sharing their corners with [VO₄] tetrahedra. The ranges of bond lengths are 2.129-2.814 Å for Bi-O; 2.035-2.167 Å for Mg-O and 1.684-1.745 Å for V-O. V-O bond lengths determined from Raman band wavenumbers are between 1.679 and 1.747 Å. An emission band overlapping the entire visible region with a maximum around 650 nm is observed.     

A catenated anion receptor based on indolocarbazole

A catenated anion receptor 7 comprising two indolocarbazole units was prepared by olefin ring-closing metathesis using Grubbs’ catalyst. Receptor 7 possesses a cage-like cavity where anions are encapsulated by forming four hydrogen bonds in the order of Cl⁻ > AcO⁻ >  >  > Br⁻ >  > I⁻ ≈  in 1% H₂O/acetone.     

Reactions of pyridyl donors with halogens and interhalogens: an X-ray diffraction and FT-Raman investigation

Three different N-donors L, namely N-ethyl-N′-3-pyridyl-imidazolidine-4,5-dione-2-thione (1), N,N′-bis(3-pyridylmethyl)-imidazolidine-4,5-dione-2-thione (2), and tetra-2-pyridyl-pyrazine (3), bearing one, two and four pyridyl substituents, respectively, have been reacted with halogens X₂ (X = Br, I) or interhalogens XY (X = I; Y = Cl, Br). CT σ-adducts L · nXY, bearing linear N?XY moieties (L = 3; X = I; Y = Br, I; n = 2), and salts containing the protonated cationic donors H_nLⁿ⁺ (L = 1 − 3; n = 1, 2, 4), counterbalanced by Cl⁻, Br⁻, , , , , I₂Br⁻, , or anions, have been isolated. Among the reactions products, (H1⁺)Cl⁻, (H1⁺)Br⁻, , , and 3 · 2IBr have been characterised by single-crystal X-ray diffraction. The nature of the products has been elucidated based on elemental analysis and FT-Raman spectroscopy supported by MP2 and DFT calculations.     

Hetero dimer from tetrakisammonium cavitand and tetratopic crown ether cavitand

Hetero dimer between tetrakis(m-ammonium)cavitand and tetrakis(dibenzo-25-crown-8)cavitand 5 was formed in CDCl₃ at room temperature. The effects of solvent polarity and temperature on the stability of were studied and the thermodynamic parameters for the formation of are , ΔH⁰ = −67.4 kcal mol⁻¹ and ΔS⁰ = −201.6 cal mol⁻¹ K⁻¹.     

Synthesis of poly(ethylene adipate) and poly(ethylene adipate-co-terephthalate) via ring-opening polymerization

Syntheses of poly(ethylene adipate) (ROP-PEA) and poly(ethylene adipate-co-terephthalate) (ROP-PEA-co-PET) were achieved via ring-opening polymerization of corresponding cyclic oligoesters. In case of ROP-PEA, cyclic oligo(ethylene adipate) (C-OEA) was equilibrated in the presence of di-n-butyltin oxide as a catalyst under high-concentration conditions at 180 and 200 °C for 1-24 h. The polymer products were obtained in yields up to 100% with the and in the ranges of 3000-23 000 g/mol and 5000-60 000 g/mol, respectively. The ROP-PEA-co-PET was prepared by equilibrating an equimolar amount of C-OEA and cyclic oligo(ethylene terephthalate) (C-OET) using di-n-butyltin oxide catalyst under high-concentration conditions at 250 °C for 24 h. The copolyester produced was obtained in yield of 97% with the and of 18 000 and 46 000 g/mol, respectively. ¹H NMR spectrum of ROP-PEA-co-PET showed two new proton signals of ethylene unit representing the existence of heterolinkage with different chemical environment in the copolymer. This indicated the random transesterification of C-OEA and C-OET resulting in random structure in copolyester. In addition, the result of ROP-PEA-co-PET from DSC showed the glass transition temperature in the values of −8 °C with no melting temperature indicating thermoplastic elastomeric behavior.     

Synthesis and application of novel ionic phosphine ligands with a cobaltocenium backbone

Six novel ionic phosphine ligands with a cobaltocenium backbone, 1,1′-bis(dicyclohexylphosphino) cobaltocenium hexafluorophosphate () (1a), 1,1′-bis(di-iso-propylphosphino) cobaltocenium hexafluorophosphate () (2a), 1,1′-bis(di-tert-butylphosphino) cobaltocenium hexafluorophosphate () (3a), and the monophosphine ligand (Cc⁺ = cobaltocenium; R = Cy, 1b; R = i-Pr, 2b; R = t-Bu, 3b) were synthesized and characterized by elemental analysis, spectroscopy, and X-ray diffraction techniques. These ligands are air-stable and useful for Suzuki coupling reactions in the ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate (), enabling high catalytic activity.     

A Raman spectroscopic study of the phase transition of BaZr(PO4)2: Evidence for a trigonal structure of the high-temperature polymorph

We have studied the structural evolution of monoclinic BaZr(PO₄)₂ during heating up to 835 K by Raman spectroscopy. In agreement with previous studies we found a first-order phase transition at about 730 K during heating while upon cooling the reverse transition occurs at 705 K. However, some disagreement about the crystal structure of the high-temperature polymorph occurs in the literature. While the space group has not yet been determined, the X-ray diffraction pattern of the high-temperature phase has been indexed on either an orthorhombic or a hexagonal unit cell. We found that the number of Raman active internal PO₄ vibrational modes decrease from nine to six during the transition. A group theoretical survey through all orthorhombic, trigonal, and hexagonal factor groups revealed that the observed number of vibrations would only be consistent with the Ba and Zr atoms located at a site, the P and two O atoms at a C_3v(3m), and six O atoms at a C_s(m) site in the D_3d factor group. Based on our Raman data, the space group of the high-temperature polymorph is thus either , , or .     

Determination of sulfur-containing amino acids by capillary electrophoresis dynamic reaction cell inductively coupled plasma mass spectrometry

Capillary electrophoresis dynamic reaction cell™ inductively coupled plasma mass spectrometry (CE-DRC-ICP-MS) for the determination of sulfur-containing amino acids is described. The sulfur-containing amino acids studied include l-cysteine, l-cystine, dl-homocystine and l-methionine. The species studied were well separated using a 70 cm length×75 μm i.d. fused silica capillary while the applied voltage was set at +22 kV and a 10 mmol l⁻¹ disodium tetraborate buffer (pH 9.8) containing 0.1 mmol l⁻¹ EDTA and 0.5 mmol l⁻¹ Triton X-100 was used as the electrophoretic buffer. The sulfur-selective electropherogram was determined at m/z 48 as by using its reaction with O₂ in the reaction cell. The method avoided the effect of polyatomic isobaric interferences at m/z 32 caused by and on by detecting as the oxide ion at m/z 48, which is less interfered. The detection limit of various species studied was in the range of 0.047-0.058 μg S ml⁻¹, which corresponded to the absolute detection limit of 1.3-1.6 pg S based on the injection volume of 27 nl. We determined the concentrations of selected sulfur-containing amino acids in urine and nutritive complement samples. The recovery was in the range of 92-128% for various species.     

Enthalpies of solution of 1,1,3,3-tetramethylurea in normal and branched alkanols (C2-C4) at 298.15 K

The enthalpies of solution were determined for 1,1,3,3-tetramethylurea in ethanol, 1-propanol, 2-propanol, 1-butanol, and t-butanol (2-methyl-2-propanol). Measurements were made at 298.15 K and molalities m ≅ (0.007 to 0.036) mol · kg⁻¹ with a precise isoperibol ampoule-type calorimeter. Standard enthalpies of solution and transfer from one alkanol to the other (including methanol) were calculated. The obvious relationship between the enthalpic and volumetric effects of solution of tetramethylurea in the n-alkanols (C₁-C₄) was discovered. The enthalpic effects of transfer caused by branching of the alkanol molecules, 1-propanol → 2-propanol, and 1-butanol → t-butanol, are opposite in sign and dominated by the configurational changes in the solvation environment of tetramethylurea.     

The coordination chemistry and reactivity of amino-dithiaphospholanes with rhodium, iridium, and ruthenium

Novel amino-dithiaphospholane complexes of ruthenium, iridium, and rhodium were synthesized, and their properties were studied. Reaction of the new amino-dithiaphospholane (RS)₂ (R = binaphthyl, R′ = CH₂Ph, (rac)-4) with [RuCl₂(p-cymene)]₂ afforded [RuCl₂(p-cymene)((rac)-4)] in 67% isolated yield. Similarly, the new amino-dithiaphospholanes (RS)₂ (R = cyclohexyl, (rac)-7) and (RS)₂ (R = phenyl, 9) gave upon reaction with [RhCl(CO)₂]₂ and [IrCp^∗Cl₂]₂ the novel complexes [RhCl(CO)(L)₂] and [IrCp^∗Cl₂(L)] (L = (rac)-7, 9) in 61-96% yields. The ruthenium complex is catalytically active for the etherification of propargylic alcohols with methanol and ethanol (8-48 h, 90 °C, 40-85% isolated yields).     

Phase polymorphism of [Zn(DMSO)6](ClO4)2 studied by differential scanning calorimetry

Four solid phases of [Zn(DMSO)₆](ClO₄)₂ have been detected by differential scanning calorimetry (DSC). Specifically, the phase transitions were detected between: metastable phase KII ↔ supercooled phase K0 at , stable phase KIb ↔ stable phase KIa at , stable phase KIa ↔ stable phase K0 at . At T_m2 = 389 K crystals partially and at T_m1 = 465 K completely melts. From the entropy change values it was concluded that the phases: K0 and K0′ are the orientationally dynamically disordered phases, so called ODDIC crystals, and phases KIa, KIb and metastable KII are dynamically ordered but with some degree of positional disorder.