Ruthenium (II) complexes of the chelating phosphine borane H2ClB · dppm

Reaction of H₂ClB · PPh₂CH₂PPh₂ (H₂ClB · dppm) with results in displacement of all three acetonitrile ligands and the formation of (1), which has been characterised crystallographically. Reaction with carbon monoxide results in a change from η² to η¹ of the borane ligand to afford (2). Compound 1 undergoes H/D exchange under a D₂ atmosphere to afford , while 2 does not.     

Synthesis and characterization of new, modified terphenyl ligands: Increasing the rotational barrier for flanking rings

The synthesis and characterization of some new terphenyl ligands, modified by meta alkyl substitution on the central ring are described. The new ligands were designed for potential applications in the stabilization of novel low valent main group species or transition metal heteronuclear multiply bonded compounds. Compounds (1), (3) (Mes = 2,4,6-trimethylphenyl), (5) (Trip = 2,4,6-triisopropylphenyl) and (6) (Dipp = 2,6-diisopropylphenyl) were obtained by addition of two equivalents of the corresponding aryl Grignard reagent to the benzyne intermediate generated by lithiation with BuⁿLi of the starting material 2,4-dichloro-5-isopropylcumene, followed by quenching with iodine. The lithium salts of 2 and 4 were obtained treatment of the parent terphenyl iodides with one equivalent of nBuLi. All compounds were isolated as either colorless crystals or as white powders. They were characterized by ¹H and ¹³C NMR spectroscopy and (in the case of 1 and 3) by X-ray crystallography. DFT calculations were performed on model terphenyl molecules in an attempt to estimate how much the rotation barriers of the flanking aryls can be influenced by substitution by alkyl groups of the two meta positions on central ring.     

Reactions of pyridyl donors with halogens and interhalogens: an X-ray diffraction and FT-Raman investigation

Three different N-donors L, namely N-ethyl-N′-3-pyridyl-imidazolidine-4,5-dione-2-thione (1), N,N′-bis(3-pyridylmethyl)-imidazolidine-4,5-dione-2-thione (2), and tetra-2-pyridyl-pyrazine (3), bearing one, two and four pyridyl substituents, respectively, have been reacted with halogens X₂ (X = Br, I) or interhalogens XY (X = I; Y = Cl, Br). CT σ-adducts L · nXY, bearing linear N?XY moieties (L = 3; X = I; Y = Br, I; n = 2), and salts containing the protonated cationic donors H_nLⁿ⁺ (L = 1 − 3; n = 1, 2, 4), counterbalanced by Cl⁻, Br⁻, , , , , I₂Br⁻, , or anions, have been isolated. Among the reactions products, (H1⁺)Cl⁻, (H1⁺)Br⁻, , , and 3 · 2IBr have been characterised by single-crystal X-ray diffraction. The nature of the products has been elucidated based on elemental analysis and FT-Raman spectroscopy supported by MP2 and DFT calculations.     

A new fluorescent metal sensor with two binding moieties

A new fluorescent chelator Oxa, having two metal-binding sites, was designed and synthesized in six steps. Oxa exhibited two distinctive dissociation constants for Zn²⁺ ( μM and  μM), with considerable fluorescence increase in aqueous buffer at pH 7.2. Affinities of Oxa for the other biologically important ions such as Ca²⁺ ( μM and  mM) and Mg²⁺ ( μM and could not be determined) in the same conditions were also obtained.     

Design and synthesis of four coordination polymers generated from 2,2′-biquinoline-4,4′-dicarboxylate and aromatic bidentate ligands

Four coordination polymers [Zn(bqdc)(phen)]_n (1), [Zn(bqdc)(bpy)(H₂O)]_n (2), [Mn(bqdc)(bpy)(H₂O)₂]_n (3) and [Mn(bqdc)(phen)(H₂O)₂]_n (4) (H₂bqdc=2,2′-biquinoline-4,4′-dicarboxylic acid, phen=1,10-phenanthroline and bpy=2,2′-bipyridyl) have been synthesized under hydrothermal conditions and characterized by single-crystal X-ray diffraction. Crystal data for 1: monoclinic system, C2/c, , , , β=103.78(3)°, , Z=4. Crystal data for 2: monoclinic system, p2₁/n, , , , β=107.13(7)°, , Z=4. Crystal data for 3: monoclinic system, C2/c, , , , β=116.8010(11)°, , Z=4. Crystal data for 4: monoclinic system, C2/c, , , , β=117.04(3)°, , Z=4. Single helix-like chains exist in 1. The supramolecular structure of 1 exhibits extended two-dimensional network while 2-4 display extended three-dimensional architectures based on interchain hydrogen bonding and π-π interactions. Compounds 1 and 2 show blue photoluminescence under UV light suggesting that they may be employed to develop luminescent materials. Compounds 3 and 4 show interesting magnetic behaviors.     

Structural characterization and ferroelectric ordering in (C3N2H5)5Sb2Br11

A ferroelectric crystal (C₃N₂H₅)₅Sb₂Br₁₁ has been synthesized. The single crystal X-ray diffraction studies (at 300, 155, 138 and 121 K) show that it is built up of discrete corner-sharing bioctahedra and highly disordered imidazolium cations. The room temperature crystal structure has been determined as monoclinic, space group, P2₁/n with: , and and β=96.19^°. The crystal undergoes three solid-solid phase transitions: ) discontinuous, continuous and discontinuous. The dielectric and pyroelectric measurements allow us to characterize the low temperature phases III and IV as ferroelectric with the Curie point at 145 K and the saturated spontaneous polarization value of the order of along the a-axis (135 K). The ferroelectric phase transition mechanism at 145 K is due to the dynamics of imidazolium cations.     

Coupling between a fluorinated olefin and a perfluorinated iodide: a model study on the reaction mechanism of perfluorinated polymer cross-linking

In a model study, , , - and - correlated NMR techniques confirm a Markovnikov type reaction intermediate for the major coupling products between a short, low MW perfluorinated iodide C₂F₅I (I) and a short, low MW fluorinated olefin CF₃(CF₂)₇CHCH₂ (II). The reaction is peroxide induced (di-t-butyl peroxide, DTBP) and is conducted at 140 °C for a 3 h reaction time in a sealed glass ampoule. Side reaction products due to the reaction of DTBP with radical reaction intermediates were also observed and identified. The study aimed to mimic as closely as possible the peroxide-initiated coupling reaction between an iodine terminated fluoropolymer (model compound I) and its fluorinated di-olefin coupling agent (model compound II). A mono-olefin was chosen to simplify the model reaction.     

Oxidative addition to main group versus transition metals: Insights from the Activation Strain model

We have studied the oxidative addition of the methane C-H and chloromethane C-Cl bonds to a number of main group (Be, Mg and Ca) and transition metals (Pd, Zn and Cd), using relativistic density functional theory (DFT) at ZORA-BLYP/TZ2P. The purpose is to better understand what causes the characteristic differences in reactivity between main group and transition metals towards oxidative addition. Thus, we have analyzed our model reactions using the Activation Strain model in which the activation energy ΔE^≠ is decomposed into the activation strain of and the stabilizing TS interaction between the reactants in the activated complex: . Activation of the C-H bond goes with higher barriers than activation of the C-Cl bond because the higher bond strength of the former translates into a higher activation strain . The barriers for bond activation increase along Pd < Be, Ca < Mg < Zn, Cd. This can be straightforwardly understood through the TS-interaction , that is, in terms of the bonding capabilities of the metals. Pd yields the lowest barriers because it achieves the most stabilizing . This is the result of the small HOMO-LUMO gap between its occupied 4d and unfilled 5s AOs, which makes Pd both a good electron donor and acceptor. Zn and Cd yield the highest barriers because the large HOMO-LUMO gap between the occupied valence ns and unfilled valence np AOs makes them both poor donors and poor acceptors of electronic charge.     

Palladium complexes with meso-bioxazoline ligands for alternating styrene/CO copolymerisation: Counterion effect

Two sets of mono- and dicationic palladium complexes (8) and (10), having and as counterions, were synthesised. The interionic structure of the methyl-acetonitrile complexes [Pd((R,S)-Bn-Box)(CH₃)(NCCH₃)](X) (8) in solution, was investigated by pulsed-gradient spin-echo (PGSE) diffusion measurements and (¹H, ¹⁹F)-HOESY NMR spectroscopy. A high degree of ion-pairing was found in each complex. The HOESY spectra showed that the and anions take up selective positions, on the side of the complex remote from the benzyl groups, but close to the acetonitrile ligand, while the triflate is, partially, occupying a pseudo fifth coordination position on the side of the cation remote from the two benzyl-groups. The complexes 8 and 10 were used as catalyst precursors for the copolymerisation of styrene with carbon monoxide, producing syndiotactic copolymers, with the exception of complex 10a, that led to isotactic copolymers.     

Syntheses and crystal structures of three new borates templated by transition-metal complexes in situ

Three new cobalt borate compounds, [Co(DIEN)₂][B₅O₆(OH)₄]₂ (DIEN=diethylenetriamine) (1), [B₅O₇(OH)₃Co(TREN)] (TREN=tris(2-aminoethyl)amine) (2), and [Co₂(TETA)₃][B₅O₆(OH)₄]₄ (TETA=triethylenetetramine) (3) have been hydrothermally synthesized and structurally characterized by single-crystal X-ray diffraction, IR, elemental analysis and thermogravimetry. The structures exhibit interesting 3D supramolecular hydrogen-bonded architectures, involving the similar borate polyanion [B₅O_6+n(OH)_4−n]⁽ⁿ⁺¹⁾⁻(n=0 for 1 and 3, and n=1 for 2) and the templating transition metal complexes which are generated in situ under mild solvothermal conditions. Crystal data: 1, monoclinic, space group C2/m (No. 12), , , , β=93.601(4)°, , Z=2; 2, monoclinic, P2₁/c (No. 14), , , , β=99.926(4)°, , Z=4; 3, triclinic, space group P-1 (No. 2), , , , α=77.009(5)°, β=80.095(2)°, γ=82.334(3)°, , Z=2.     

Bimetallic nickel complexes of macrocyclic tetraiminodiphenols and their ethylene polymerization

Schiff’s base condensation of 2,6-diformyl-4-R-phenol and affords 34-membered macrocyclic tetraiminodiphenol compounds, (R = H and R′ = iPr, 1; R = Me and R′ = iPr, 2; R = F and R′ = iPr, 3; R = Me and R′ = Et, 4; R = F and R′ = Et, 5) in good yields (47-62%), from which dinuclear nickel complexes, (R = H and R′ =  iPr, 6; R = Me and R′ = iPr, 7; R = F and R′ = iPr, 8) are prepared. Molecular structures of 2, dipotassium salt of 1, and 7 were confirmed by X-ray crystallography. Addition of B(C₆F₅)₃ to a toluene solution of 6-8 gives insoluble precipitates which show good activity for ethylene polymerization.     

Synthesis, structure and optical limiting effect of a novel inorganic-organic hybrid polymer containing mixed chains of copper(I)/iodine

In this paper, treatment of N-ethyl-benzo[f]quinolium (ebq) iodide and CuI with excess KI afforded an unusual coordination polymer [(ebq)₂(Cu₃I₄)(CuI₂)]_n (1). 1 crystallizes in tetragonal system, space group P4(2)bc with cell parameters of , , , Z=8, , R₁=0.0447 and wR₂=0.0974. A highly interesting feature of 1 is its presence of mixed types of chains [ and chain] in one crystal lattice based on supramolecular self-assembly directed by cations. The infinite chains and in 1 could be described as the edge-sharing arrangement of CuI₄ tetrahedron. Furthermore, IR, EA, UV-Vis, thermal analysis and optical limiting measurements were adopted to characterize polymer 1. The optical limiting experiment shows that the present polymer exhibits a large optical limiting capacity.     

Adamantane-dipyrromethanes: novel anion receptors

New adamantane-dipyrromethanes (AdD 1-4) were synthesized and their anion binding properties investigated. AdD 1-3 form 2:1 complexes with F⁻ (AdD:F = 2:1) characterized by high association constants, and 1:1 complexes with Cl⁻, Br⁻, and . The binding of Cl⁻, Br⁻, and by AdD 1-3 is 2-3 times stronger than for the reference compound, meso-phenyldipyrromethane (5). However, AdD 4 forms complexes with F⁻ characterized by 1:1 and 1:2 stoichiometry (AdD:F = 1:2).     

Low-temperature flux syntheses and characterizations of two 1-D anhydrous borophosphates: Na3B6PO13 and Na3BP2O8

Two new anhydrous sodium borophosphates with one-dimensional structure, Na₃B₆PO₁₃(1) and Na₃BP₂O₈(2), were synthesized by low-temperature molten salts techniques using boric acid and sodium dihydrogen phosphate as flux, respectively. The crystal structures were solved by means of single-crystal X-ray diffraction (1, orthorhombic, Pnma (no. 62), , , , Z=4; 2 , monoclinic, C2/c (no. 15), , , , β=92.492(5)°, Z=8). Compound 1 is characterized by an infinite chain of containing eight-membered rings in which all vertexes of borate groups contribute to interconnection. Compound 2 reveals an infinite straight chain built of vertex-sharing four-membered rings, and chains in neighboring layers arranged along different orientations. The relations between structures and the synthetic conditions with only traced water are discussed.