Separation of six purine bases by capillary electrophoresis with electrochemical detection

Capillary zone electrophoresis with electrochemical detection (ED) has been employed for the separation and determination of adenine (A), guanine (G), theophylline (Thp), hypoxanthine (HX), xanthine (Xan) and uric acid (UA). Effects of several important factors such as the acidity and concentration of running buffer, separation voltage, injection time and detection potential were investigated to acquire the optimum conditions. The detection electrode was a 300 μm carbon disc electrode at a working potential of +0.95 V (versus saturated calomel electrode (SCE)). The six purine bases can be well separated within 14 min in a 40 cm length fused-silica capillary at a separation voltage of 10 kV in a 100 mmol/l borate buffer (BB, pH 10.0). The current response was linear over about three orders of magnitude with detection limits (S/N=3) ranging from 0.157×10⁻⁶ to 0.767×10⁻⁶ mol/l for all compounds. The proposed method was successfully applied to determine Thp in tea and aminophylline tablets, UA in human urine, and two purine bases in DNA.     

Study of uptake kinetics of vincristine for human erythrocytes by capillary zone electrophoresis with electrochemical detection

Capillary zone electrophoresis (CZE) was employed for the determination of vincristine using electrochemical detection with a carbon fiber microdisk bundle electrode at a constant potential of 1.0 V versus saturated calomel electrode (SCE). The optimum conditions of separation and detection are 1.7×10⁻² Na₂HPO₄− 3.2×10⁻³ mol/l NaH₂PO₄ (pH 7.5) for the buffer solution, 20 kV for the separation voltage. The limit of detection is 5.0×10⁻⁷ mol/l or 2.2 fmol (S/N=3) for the injection voltage of 5 kV and the injection time of 10 s. The recovery of the method is between 95 and 101% for the vincristine taken by human erythrocytes. The method was applied to investigate uptake and accumulation behavior of vincristine for human erythrocytes. The advantages of the method are the small sample volume of CZE and the high selectivity and sensitivity of electrochemical detection.     

Mercury-free simultaneous determination of cadmium and lead at a glassy carbon electrode modified with multi-wall carbon nanotubes

A multi-wall carbon nanotube (MWNT) modified glassy carbon electrode (GCE) was described for the simultaneous determination of trace levels of cadmium and lead by anodic stripping voltammetry (ASV). In pH 4.5 NaAc-HAc buffer containing 0.02 mol/l KI, Cd²⁺ and Pb²⁺ first adsorb onto the surface of a MWNT film coated GCE and then reduce at −1.20 V. During the positive potential sweep, reduced cadmium and lead were oxidized, and two well-defined stripping peaks appeared at −0.88 and −0.62 V. Compared with a bare GCE, a MWNT film coated GCE greatly improves the sensitivity of determining cadmium and lead. Low concentration of I⁻ significantly enhances the stripping peak currents since it induces Cd²⁺ and Pb²⁺ to adsorb at the electrode surface. The striping peak currents change linearly with the concentration of Cd²⁺ from 2.5×10⁻⁸ to 1×10⁻⁵ mol/l and with that of Pb²⁺ from 2×10⁻⁸ to 1×10⁻⁵ mol/l. The lowest detectable concentrations of Cd²⁺ and Pb²⁺ are estimated to be 6×10⁻⁹ and 4×10⁻⁹ mol/l, respectively. The high sensitivity, selectivity, and stability of this MWNT film coated electrode demonstrated its practical application for a simple, rapid and economical determination of trace levels of Cd²⁺ and Pb²⁺ in water samples.     

Novel nitric oxide microsensor and its application to the study of smooth muscle cells

A novel sensitive, selective and stable nitric oxide (NO) microsensor is described, which is modified by nano Au colloid and Nafion. As determined by atomic forced microscopy (AFM), the diameter of Au colloid particles is from 7 to 14 nm. The detection of NO is based on the nano Au particles catalysis of NO oxidation at an anodic potential of +0.74 V (versus saturated calomel electrode (SCE)). The microsensor showed a low detection limit, high selectivity and sensitivity for NO determination. The oxidation current (measured by differential pulse amperometric technique) was linear with NO concentration ranging from 1.0×10⁻⁷ to 4.0×10⁻⁵ mol/l with a calculated detection limit of 5.0×10⁻⁸ mol/l (S/N=3). Using the microsensor, the direct real time production of NO in the smooth muscle cells was continuously measured, which showed the NO levels was increased by stimulating with l-arginine (l-Arg), acetylcholine (Ach) and a self-made flavonoid medicine.     

Voltammetric behavior and determination of estrogens at Nafion-modified glassy carbon electrode in the presence of cetyltrimethylammonium bromide

A method is described for the determination of estrogens (estradiol, estrone and estriol) by stripping voltammetry. These estrogens yield one well-defined oxidation peak at the Nafion-modified glassy carbon electrode in the presence of cetyltrimethylammonium bromide (CTAB). The peak current is proportional to the concentration of estradiol in the range from 2.5×10⁻⁸ to 1.5×10⁻⁶ mol/l, and the detection limit is 1×10⁻⁹ mol/l after accumulation of 6 min. The total amounts of estrogens in the blood serums were determined using the voltammetric method, and the average recovery was 106.04%. The mechanism of the oxidation of estradiol was investigated by electrochemical techniques and UV spectra.     

Determination of puerarin and daidzein in Puerariae radix and its medicinal preparations by micellar electrokinetic capillary chromatography with electrochemical detection

The use of micellar electrokinetic capillary chromatography (MECC) with electrochemical detection is described for the determination of puerarin and daidzein in Puerariae radix and its medicinal preparations. Operated in a wall-jet configuration, a 300 μm diameter carbon-disk electrode was used as the working electrode, which exhibits good responses at +900 mV (versus SCE) for the two analytes. Under the optimum conditions, the analytes were base-line separated within 11 min in a sodium dodecyl sulphate—borax (pH 7.8) running buffer, and excellent linearity was obtained in the concentration range from 5.0×10⁻⁴ to 5.0×10⁻⁶ mol/l. The detection limit (S/N=3) was 6×10⁻⁷ and 1.1×10⁻⁶ mol/l for puerarin and daidzein, respectively. This work provides a useful method for the analysis of traditional Chinese medicines.     

A flow-injection chemiluminescence method for the determination of some estrogens by enhancement of luminol-hydrogen peroxide-tetrasulfonated manganese phthalocyanine reaction

A novel flow-injection chemiluminescence (FI-CL) method for the determination of estrogens is proposed, based upon its enhancing effect on the CL reaction of luminol with hydrogen peroxide catalyzed by tetrasulfonated manganese phthalocyanine (MnTSPc) in alkaline solution. Under the selected experimental conditions, a linear relationship was obtained between the CL intensity and the concentration of estrone in the range of 1.0 × 10⁻⁷ to 1.0 × 10⁻⁶ mol/l, estradiol in the range of 9.0 × 10⁻⁸ to 1.0 × 10⁻⁶ mol/l and estriol in the range of 3.0 × 10⁻⁷ to 2.0 × 10⁻⁶ mol/l, respectively. The detection limits were 5.1 × 10⁻⁸ mol/l for estrone, 7.2 × 10⁻⁹ mol/l for estradiol and 6.5 × 10⁻⁸ mol/l for estriol with a relative standard deviation of 2.8% for 5.0 × 10⁻⁷ mol/l estrone, 2.4% for 1.0 × 10⁻⁷ mol/l estradiol, and 3.1% for 7.0 × 10⁻⁷ mol/l estriol (n = 11). This method has been applied to the determination of estrogen in pharmaceutical injections and tap water with satisfactory results.     

Chemometric optimization of a SIA promethazine hydrochloride assay method

A sequential injection analysis (SIA) method for the assay of promethazine hydrochloride, based on its oxidation by acidified cerium(IV), was optimized. Three chemometric approaches were applied: (i) factorial design (3³ applied to surface plot and 2³ applied to effect factor) for screening the potential interacting variables, (ii) univariant for optimizing insignificantly interacting variables and (iii) simplex for optimizing potentially interacting variables. The optimum experimental conditions were 30 μl of 0.38 mol/l sulphuric acid, 30 μl of 3.99 × 10^− 3 mol/l cerium(IV), 20 μl of promethazine hydrochloride and 20 μl/s flow rate. The detection limit was 7.032 × 10^− 5 mol/l and the calibration curve was linear up to 1.563 mol/l with a correlation coefficient 0.9998, accuracy range of 89.0-101.5%, relative standard deviation 1.1% (n = 10) and sample frequency at least 20 samples/h. The method was applied to tablet form and validated with the British Pharmacopoeia method. The developed SIA method is fully automated, reproducible, sensitive, rapid and reagent-saving, and therefore suitable for routine control in tablets form.     

Indirect determination of bromide by diffusion flow injection analysis with amperometric detection

Summary A rapid, indirect diffusion flow injection analysis (FIA) method with amperometric detection has been developed for the selective and sensitive determination of Br^–. The method is based on permanganate oxidation of Br^– to bromine. Bromine diffuses through a PTFE membrane and is quantified amperometrically at a platinum working electrode. Calibration graphs were linear up to the maximum concentration of Br^– investigated (10.0 mmol/l). The precision of the technique was better than a relative standard deviation of 0.7% at 10.0 mol/l, with a throughput of 30 samples per hour. The effects of temperature, acidity, working potential, composition of the reagent solution and interferents on the FIA signals were studied. The catalytic effect of Cl^– on the permanganate oxidation of the analyte was utilized to lower the detection limit to 1 mol/l (16 ng Br^–). Similar detection limits were achieved by combining the effects of higher acidity (4.0 mol/l H₂SO₄) and elevated temperatures (40°C). The method was successfully applied to the determination of Br^– in chloride and other reagents, as well as in natural waters.     

Copper(II)-selective electrode based on dithioacetal

A PVC membrane electrode for copper ion based on 1,3-dithiane,2-(4-methoxy phenyl) as ionophore and o-nitrophenyl octyl ether as a plasticizer is demonstrated. The electrode exhibits a Nernstian slope of 29.5±1 mV per decade in a linear range of 3.0×10⁻⁶ to 5.0×10⁻² M for Cu²⁺ ion. The detection limit of this electrode is 1.0×10⁻⁶ mol/l. This sensor has a very short response time of about 5 s and could be used in a pH range of 4.0-7.0. High selectivity was obtained over a wide variety of metal ions. The proposed electrode was successfully applied as an indicator electrode for the potentiometric titration of copper ion with EDTA and for the direct determination of copper in river water.     

A new electrochemiluminescent sensing system for glucose based on the electrochemiluminescent reaction of bis-[3,4,6-trichloro-2-(pentyloxycarbonyl)-phenyl] oxalate

In this paper, the electrochemiluminescence (ECL) behavior of bis-[3,4,6-trichloro-2-(pentyloxycarbonyl)-phenyl] oxalate (BTPPO) at glassy carbon electrode (GCE) in phosphate buffer solution in the presence of hydrogen peroxide has been investigated when linear sweep voltammetry was applied. The optimum chemical conditions and electrochemical parameters for this ECL system have been investigated in detail. Under the optimum conditions, it was found that the concentration of BTPPO was linear with the ECL intensity in the range of 3.0 × l0⁻⁶ to 3.0 × 10⁻⁴ mol/L, and the detection limit (S/N = 3) for BTPPO was 1.0 × 10⁻⁷ mol/L. The possible mechanism for ECL of BTPPO at the GCE in the presence of hydrogen peroxide was also discussed. Furthermore, based on the fact that glucose oxidase can react with glucose to produce hydrogen peroxide, a new ECL sensing system of BTPPO has been developed for detection of glucose. The enhanced ECL intensity has a linear relationship with the concentration of glucose in the range of 1.0 × l0⁻⁴ to 1.0 × 10⁻³ mol/L, and the detection limit for glucose is found to be 5.0 × 10⁻⁵ mol/L (S/N = 3).     

Electrocatalytic oxidation and detection of hydrazine at gold electrode modified with iron phthalocyanine complex linked to mercaptopyridine self-assembled monolayer

Electrocatalytic oxidation and detection of hydrazine in pH 7.0 conditions were studied by using gold electrode modified with self-assembled monolayer (SAM) films of iron phthalocyanine (FePc) complex axially ligated to a preformed 4-mercaptopyridine SAMs. The anodic oxidation of hydrazine in neutral pH conditions with FePc-linked-mercaptopyridine-SAM-modified gold electrode occurred at low overpotential (0.35 V versus Ag|AgCl) and the treatment of the voltammetric data showed that it was a pure diffusion-controlled reaction with the involvement of one electron in the rate-determining step. The mechanism for the interaction of hydrazine with the FePc-SAM is proposed to involve the Fe^(III)Pc/Fe^(II)Pc redox process. Using cyclic voltammetry (CV) and Osteryoung square wave voltammetry (OSWV), hydrazine was detected over a linear concentration range of 1.3 × 10⁻⁵ to 9.2 × 10⁻⁵ mol/L with low limits of detection (ca. 5 and 11 μM for OSWV and CV, respectively). At concentrations higher than 1.2 × 10⁻⁴ mol/L the anodic peak potential shifted to 0.40 V (versus Ag|AgCl), and this was interpreted to be due to kinetic limitations resulting from the saturation of hydrazine and its oxidation products onto the redox-active monolayer film. This type of metallophthalocyanine-SAM-based electrode is a highly promising electrochemical sensor given its ease of fabrication, good catalytic activity, stability, sensitivity and simplicity.     

Studies on electrochemical behaviors of acyclovir and its voltammetric determination with nano-structured film electrode

A multi-wall carbon nanotubes (MWNTs)-dihexadecyl hydrogen phosphate (DHP) film-coated glassy carbon electrode (GCE) was fabricated, and the electrochemical behaviors of acyclovir on the MWNTs-DHP film-coated GCE were investigated by using cyclic voltammetry (CV), linear sweep voltammetry (LSV), electrochemical impedance spectroscopy (EIS) and chronocoulometry (CC). The oxidation peak current of acyclovir increased significantly and the peak potential shifted negatively at the MWNTs-DHP film-modified GCE, compared with that at a bare GCE. The results showed that this nano-structured film electrode exhibited excellent enhancement effects on the electrochemical oxidation of acyclovir. Consequently, a simple and sensitive electroanalytical method was developed for the determination of acyclovir. The oxidation peak current was proportional to the concentration of acyclovir from 8.0 × 10⁻⁸ to 1.0 × 10⁻⁵ mol/L. The detection limit was about 3.0 × 10⁻⁸ mol/L for 60 s accumulation at 0.00 V. The proposed method was demonstrated by using acyclovir tablets and the result was satisfying.     

Preparation of Ce-PbO(2) modified electrode and its application in detection of anilines

The effect of Ce(III) on the morphology and structure of lead dioxide (PbO₂) modified electrode was studied in this paper. The results obtained by cyclic voltammetry (CV), X-ray diffractometion (XRD) and scanning tunneling micrograph (STM) indicated that the Ce-doped PbO₂ film consisted of a mixture of α- and β-PbO₂ crystallographic phases and the content of α-phase was higher than that in undoped PbO₂ film. PbO₂ crystal grains in nanometric size were formed on the electrode surface by doping with Ce. So that the specific surface areas and catalytic active sites of the modified electrode were increased. Hence the catalytic activity of the Ce-PbO₂ modified electrode was evidently greater than the undoped PbO₂ modified electrode. When the Ce-PbO₂ modified electrode was applied as an analytical sensor to determine aniline compounds, the linearity was in the range of 5×10⁻⁵ to 1×10⁻³ mol/l and the detection limit was 1×10⁻⁵ mol/l.     

Electrochemical behaviors of guanosine on carbon ionic liquid electrode and its determination

The electrochemical behaviors of guanosine on the ionic liquid of N-butylpyridinium hexafluorophosphate (BPPF₆) modified carbon paste electrode (CPE) was studied in this paper and further used for guanosine detection. Guanosine showed an adsorption irreversible oxidation process on the carbon ionic liquid electrode (CILE) with the oxidation peak potential located at 1.12 V (vs. SCE) in a pH 4.5 Britton-Robinson (B-R) buffer solution. Compared with that on the traditional carbon paste electrode, small shift of the oxidation peak potentials appeared but with a great increment of the oxidation peak current on the CILE, which was due to the presence of ionic liquid in the modified electrode adsorbed the guanosine on the surface and promoted the electrochemical response. The electrochemical parameters such as the electron transfer coefficient (α), the electron transfer number (n), and the electrode reaction standard rate constant (k_s) were calculated as 0.74, 1.9 and 1.26 × 10⁻⁴ s⁻¹, respectively. Under the optimal conditions the oxidation peak current showed a good linear relationship with the guanosine concentration in the range from 1.0 × 10⁻⁶ to 1.0 × 10⁻⁴ mol/L by cyclic voltammetry with the detection limit of 2.61 × 10⁻⁷ mol/L (3σ). The common coexisting substances showed no interferences to the guanosine oxidation. The CILE showed good ability to distinguish the electrochemical response of guanosine and guanine in the mixture solution. The urine samples were further detected by the proposed method with satisfactory results.     

Electrochemiluminescence of CdTe quantum dots as labels at nanoporous gold leaf electrodes for ultrasensitive DNA analysis

A new electrochemiluminescence (ECL) DNA assay is developed using quantum dots (QDs) as DNA labels. When nanoporous gold leaf (NPGL) electrodes are used, sensitivity of the ECL assay is remarkably increased due to ultra-thin nanopores. In this assay, target DNA (t-DNA) is hybridized with capture DNA (c-DNA) bound on the NPGL electrode, which is fabricated by conjugating amino-modified c-DNA to thioglycolic acid (TGA) modified at the activated NPGL electrode. Following that, amino-modified probe DNA is hybridized with the t-DNA, yielding sandwich hybrids on the NPGL electrode. Then, mercaptopropionic acid-capped CdTe QDs are labeled to the amino group end of the sandwich hybrids. Finally, in the presence of S₂O₈²⁻ as coreactant, ECL emission of the QD-labeled DNA hybrids on the NPGL electrode is measured by scanning the potential from 0 to −2 V to record the curve of ECL intensity versus potential. The maximum ECL intensity (I_m,ECL) on the curve is proportional to t-DNA concentration with a linear range of 5 × 10⁻¹⁵ to 1 × 10⁻¹¹ mol/L. The ECL DNA assay can be used to determine DNA corresponding to mRNA in cell extracts in this study.     

Preparation of poly(vinylpyrrolidone)-protected Prussian blue nanoparticles-modified electrode and its electrocatalytic reduction for hemoglobin

In this paper, a novel modified electrode was developed by using highly dispersed Prussian blue (PB) nanoparticles protected by poly(vinylpyrrolidone) (PVP). The size of the nanoparticles was controlled through adjusting the feed ratio of PVP/Fe²⁺. Physical characteristics of the nanocomposite were studied by transmission electron microscopy (TEM), UV-vis, IR spectroscopy, and X-ray powder diffraction (XRPD) analysis. The electrocatalytic reduction of hemoglobin (Hb) at PVP-protected PB nanoparticles (PVP/PB NPs)-modified electrode had been investigated. In addition, the size effects and biocompatibility of PVP/PB NPs for the electrochemistry of Hb were also observed. Experimental results indicated that the reduction peak currents of Hb were linear with its concentrations over the range from 1.0 × 10⁻⁷ to 1.2 × 10⁻⁵ mol/L and the calculated detection limit (S/N = 3) was 4.0 × 10⁻⁸ mol/L.     

Myoglobin/arylhydroxylamine film modified electrode: Direct electrochemistry and electrochemical catalysis

The adsorption processes and electrochemical behavior of 4-nitroaniline (4-NA) adsorbed onto glassy carbon electrodes (GCE) have been investigated in aqueous 0.1 M nitric acid (HNO₃) electrolyte solutions using cyclic voltammetry (CV). 4-NA adsorbs onto GCE surfaces, and upon potential cycling past −0.2 V, is transformed into the arylhydroxylamine (ArHA) derivative which exhibits a well-behaved pH dependent redox couple centered at 0.32 V at pH 1.5. It is noted as arylhydroxylamine modified glassy carbon electrodes (HAGCE). This modified electrode can be readily used as an immobilization matrix to entrap proteins and enzymes. In our studies, myoglobin (Mb) was used as a model protein for investigation. A pair of well-defined reversible redox peaks of Mb (Fe(III)-Fe(II)) was obtained at the Mb/arylhydroxylamine modified glassy carbon electrode (Mb/HAGC) by direct electron transfer between the protein and the GCE. The formal potential (E^0′), the apparent coverage (Γ^*) and the electron-transfer rate constant (k_s) were calculated as −0.317 V, 8.26 × 10⁻¹² mol/cm² and 51 ± 5 s⁻¹, respectively. Dramatically enhanced biocatalytic activity was exemplified at the Mb/HAGC electrode by the reduction of hydrogen peroxide (H₂O₂), trichloroacetic acid (TCA) and oxygen (O₂). The Mb/arylhydroxylamine film was also characterized by UV-visible spectroscopy (UV-vis), scanning electron microscope (SEM) indicating excellent stability and good biocompatibility of the protein in the arylhydroxylamine modified electrode. This new Mb/HAGC electrode exhibited rapid electrochemical response (2 s) for H₂O₂ and had good stability in physiological condition, showing the potential applicability of the films in the preparation of third generation biosensors or bioreactors based on direct electrochemistry of the proteins.     

Study on the co-luminescence effect of Tb-Gd-epinephrine system and its application to the sensitive determination of epinephrine at nanomol level

A new fluorimetric method for the determination of epinephrine is established by rare earth co-luminescence effect of Tb-Gd-E-Tris system. Under optimum conditions, a linear relationship has been obtained between the fluorescence intensity and the concentration of epinephrine in the range of 1.8 × 10⁻⁸ to 2.5 × 10⁻⁶ mol/l, and the detection limit is 4.5 × 10⁻⁹ mol/l (S/N = 3). The method is applied for the determination of epinephrine in injection and the recovery test in urine by standard addition method, and the results obtained are satisfactory. The mechanism of the co-luminescence in the system was also discussed.     

Separation and determination of l-tyrosine and its metabolites by capillary zone electrophoresis with a wall-jet amperometric detection

A method of capillary electrophoresis with wall-jet amperometric detection (AD) has been developed for separation and determination of l-tyrosine (Tyr) and its metabolites, such as Tyramine (TA), p-hydroxyphenylpyruvic (pHPP), homogentisic acid (HGA) and some dipeptides containing Tyr, such as Tyr-Gly-Gly (YGG), Tyr-Arg (YR) and Tyr-d-Arg (Y-d-R). A carbon disk electrode was used as the working electrode and the optimal detection potential was 1.00 V (versus Ag/AgCl). At 18 kV of applied voltage, the seven compounds were completely separated within 20 min in 110 × 10⁻³ mol/L Na₂HPO₄-NaH₂PO₄ buffer (pH 7.10) containing 3 × 10⁻³ mol/L β-cyclodextrin (β-CD). Good linear relationship was obtained for all analytes and the detection limits of seven analytes were in the range of 0.95-4.25 ng/mL. The proposed method has been applied to examine the metabolic process of l-tyrosine in rabbit's urine.