Liquid-Phase Synthesis of Methyl （2Z）-2-Arylsulfonylmethyl-2-alkenoates from PEG-Supported a-Phenylselenopropionate

Treatment of lithio derivativ e of novel PEG-supported a-phenylselenopropionate with aldehydes, followed by oxidation-elimination with 30% hydrogen peroxide, formed Baylis-Hillman products, which were then reacted with sodium arylsulfinate. The resulting sulfonylated products were cleaved from the PEG efficiently affording methyl （2Z）-2-arylsulfonylmethyl-2-alkenoates in good yields and high purities.     

An H‐shaped polymer bonding β‐cyclodextrin at branch points: Synthesis and influences of attached β‐cyclodextrins on physical properties

We report on the synthesis of an H‐shaped polymer bonding β‐cyclodextrin (β‐CD) at branch points and influences of attached β‐CD on physical properties. First, a poly(ethylene glycol)(PEG)‐based functional macroinitiator bearing two azidos and four chlorines at chain‐ends (PEG‐2N₃(‐4Cl)) was prepared via terminal modification reactions. Then, PEG‐2N₃(‐4Cl) was applied to initiate the atom transfer radical polymerization of N‐isopropylacrylamide, leading to the synthesis of an H‐shaped block polymer with PEG as the central chain and poly(N‐isopropylacrylamide) (PNIPAM) as side‐arms (PEG‐2N₃(‐4PNIPAM)). Azido groups were at the branch points of the polymer. Finally, the click reaction between PEG‐2N₃(‐4PNIPAM) and alkynyl monosubstituted β‐cyclodextrin (β‐CD) afforded another H‐shaped polymer with two β‐CDs bonding at the polymer branch points (PEG‐2CD(‐4PNIPAM)). The glass transition temperature (T_g) and lower critical solution temperature (LCST) of the H‐shaped polymer increased after the attachment of β‐CD. The self‐assembly and thermal responsive behaviors, as well as the encapsulation behaviors of PEG‐2CD(‐4PNIPAM) were also altered. When temperature was below the LCSTs, PEG‐2N₃(‐2PNIPAM) dissolved in water molecularly, whereas PEG‐2CD(‐4PNIPAM) could self‐assemble into nano‐sized micelles. After the LCST transitions, PEG‐2N₃(‐4PNIPAM) aggregated into micron‐sized unstable particles, whereas PEG‐2CD(‐4PNIPAM) transformed into PNIPAM‐cored nanomicelles. Besides, PEG‐2CD(‐4PNIPAM) can encapsulate doxorubicin below its LCST due to the formation of micelles. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Silica‐Bound 3‐{2‐[Poly(ethylene Glycol)]ethyl}‐Substituted 1‐Methyl‐1H‐imidazol‐3‐ium Bromide: A Recoverable Phase‐Transfer Catalyst for Smooth and Regioselective Conversion of Oxiranes to β‐Hydroxynitriles in Water

A series of β‐hydroxynitriles were efficiently synthesized from the regioselective ring opening of oxiranes by cyanide anion in the presence of silica‐bound 3‐{2‐[poly(ethylene glycol)]ethyl}‐substituted 1‐methyl‐1H‐imidazol‐3‐ium bromide (SiO₂? PEG? ImBr) as a novel recoverable phase‐transfer catalyst in H₂O (Scheme 1 and Table 2). The workup procedure was straightforward, and the catalyst could be reused over four times with almost no loss of catalytic activity and selectivity.     

Aminopropylated PEG as a novel,eco‐friendly and biodegradable basic catalyst for bis‐Michael addition to α,β‐unsaturated ketones under solvent‐free conditions

A solvent‐free and highly efficient protocol has been developed for the synthesis of novel bis‐Michael addition products ( 3a , 3b , 3c , 3d , 3e , 3f , 3g , 3h , 3i , 3j , 3k , 3l , 3m , 3n , 3o ) using aminopropylated PEG‐6000 (NH₂‐PEG) as a biodegradable and recyclable catalyst in excellent yields under solvent‐free conditions. Other remarkable features of this environmentally benign protocol are shorter reaction time, tolerance of a wide range of C―H‐activated acids, high yield of products, and simple experimental and work‐up procedure as compared to conventional methods. The NH₂‐PEG catalyst is characterized by using FT‐IR, powder XRD and scanning electron microscopy–energy dispersion X‐ray spectrometric analyses. The catalyst can be recycled several times without significant loss of its catalytic activity. Copyright © 2014 John Wiley & Sons, Ltd.     

Facile Synthesis of Substituted Ethyl 2‐(Chloromethyl)‐2‐hydroxy‐2H‐1‐benzopyran‐3‐carboxylates

Ethyl 2‐(chloromethyl)‐2‐hydroxy‐2H‐chromene‐3‐carboxylates 2a – 2j have been synthesized by reaction of substituted salicylaldehydes with ethyl 4‐chloro‐3‐oxobutanoate, in the presence of piperidine in CH₂Cl₂ at room temperature, in good yields.     

Synthesis of 1,3‐Dihydro‐3‐oxo‐2‐benzofuran‐1‐carboxylates via Intramolecular Cyclization of 2‐[2‐(Dimethoxymethyl)phenyl]‐ 2‐hydroxyalkanoates Followed by Oxidation

A novel and efficient method for the preparation of 1,3‐dihydro‐3‐oxo‐2‐benzofuran‐1‐carboxylates 4 under mild conditions has been developed. Thus, the reaction of [2‐(dimethoxymethyl)phenyl]lithiums, generated easily from 1‐bromo‐2‐(dimethoxymethyl)benzenes 1 , with α‐keto esters gives the corresponding 2‐[2‐(dimethoxymethyl)phenyl]‐2‐hydroxyalkanoates 2 . The TsOH‐catalyzed cyclization of these hydroxy acetals is followed by the oxidation of the resulting cyclic acetals 3 with PCC to give the desired products in satisfactory yields. The reaction of [2‐(dimethoxymethyl)‐4,5‐dimethoxyphenyl]lithium with (MeOC?O)₂, followed by treatment with NaBH₄ or organolithiums, affords 2‐[2‐(dimethoxymethyl)‐4,5‐dimethoxyphenyl]‐2‐hydroxyalkanoates 6 , which can similarly be transformed into the corresponding 1,3‐dihydro‐3‐oxo‐2‐benzofuran‐1‐carboxylates 7 in reasonable yields.     

Alternative Synthesis of 2‐Hydroxy‐3,5,5‐trimethylcyclopent‐2‐en‐1‐one

The 2‐hydroxy‐3,5,5‐trimethylcyclopent‐2‐en‐1‐one ( 1 ) was synthesized in 42% yield by rearrangement of epoxy ketone 10 on treatment with BF₃⋅Et₂O under anhydrous conditions. Intermediate 10 was available from the known enone 8 , either via direct epoxidation (60% H₂O₂, NaOH, MeOH; yield 50%), or via reduction to the corresponding allylic alcohol 14 (LiAlH₄, THF), followed by epoxidation ([VO(acac)₂], ^tBuOOH) and reoxidation under Swern conditions, in 37% total yield.     

Synthesis and Cytotoxicity of 6‐Pyrrolidinyl‐2‐(2‐Substituted Phenyl)‐4‐Quinazolinones

In our continuing search for potential anticancer candidates, 2‐(3‐methoxyphenyl)‐6‐pyrrolidinyl‐4‐quinazolinone ( JJC‐1 ) was selected as the lead compound. Starting 5‐pyrrolidinyl‐2‐aminobenzamide was prepared using standard methodology from 5‐chloro‐2‐nitrobenzoic acid by reaction with SOCl₂, NH₃, pyrrolidine, and H₂. The starting benzamide then was reacted with 2‐substituted benzaldehyde or benzoyl chloride in N,N‐dimethylacetamide (DMAC) in the presence of NaHSO₃ at 150 °C. Thermal cyclodehydration/dehydrogenation gave the target 6‐pyrrolidinyl‐2‐(2‐substituted phenyl)‐4‐quinazolinones ( 15–22 ). These target compounds were assayed for their cytotoxicity in vitro against six cancer cell lines, including human monocytic leukemia cells (U937), mouse monocytic leukemia cells (WEHI‐3), human hepatoma cells (HepG2, Hep3B) and human lung carcinoma cells (A549, CH27). Most of them exhibited significant cytotoxic effect toward U937 and WEHI‐3 cells, with EC₅₀ values ranging from 0.30 to 10.10 μM. Compound 19 was investigated further for its action mechanisms. Preliminary findings indicated that compound 19 induced G2/M arrest and apoptosis on U937 cells.     

Synthesis and characterization of novel biodegradable block copolymer poly(ethylene glycol)‐block‐poly(L‐lactide‐co‐2‐methyl‐2‐carboxyl‐propylene carbonate)

An amphiphilic block copolymer, poly(ethylene glycol)‐block‐poly(L ‐lactide‐co‐2‐methyl‐2‐benzoxycarbonyl‐propylene carbonate) [PEG‐b‐P(LA‐co‐MBC)], was synthesized in bulk by the ring‐opening polymerization of L ‐lactide with 2‐methyl‐2‐benzoxycarbonyl‐propylene carbonate (MBC) in the presence of poly(ethylene glycol) as a macroinitiator with diethyl zinc as a catalyst. The subsequent catalytic hydrogenation of PEG‐b‐P(LA‐co‐MBC) with palladium hydroxide on activated charcoal (20%) as a catalyst was carried out to obtain the corresponding linear copolymer poly(ethyleneglycol)‐block‐poly(L ‐lactide‐co‐2‐methyl‐2‐carboxyl‐propylenecarbonate) [PEG‐b‐P(LA‐co‐MCC)] with pendant carboxyl groups. DSC analysis indicated that the glass‐transition temperature (T_g) of PEG‐b‐P(LA‐co‐MBC) decreased with increasing MBC content in the copolymer, and T_g of PEG‐b‐P(LA‐co‐MCC) was higher than that of the corresponding PEG‐b‐P(LA‐co‐MBC). The in vitro degradation rate of PEG‐b‐P(LA‐co‐MCC) in the presence of proteinase K was faster than that of PEG‐b‐P(LA‐co‐MBC), and the cytotoxicity of PEG‐b‐P(LA‐co‐MCC) to chondrocytes from human fetal arthrosis was lower than that of poly(L ‐lactide). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4771–4780, 2005     

Polymorphism of 3‐(5‐phenyl‐1,3,4‐oxadiazol‐2‐yl)‐ and 3‐[5‐(pyridin‐4‐yl)‐1,3,4‐oxadiazol‐2‐yl]‐2H‐chromen‐2‐ones

This study of 3‐(5‐phenyl‐1,3,4‐oxadiazol‐2‐yl)‐2H‐chromen‐2‐one, C₁₇H₁₀N₂O₃, 1 , and 3‐[5‐(pyridin‐4‐yl)‐1,3,4‐oxadiazol‐2‐yl]‐2H‐chromen‐2‐one, C₁₆H₉N₃O₃, 2 , was performed on the assumption of the potential anticancer activity of the compounds. Three polymorphic structures for 1 and two polymorphic structures for 2 have been studied thoroughly. The strongest intermolecular interaction is stacking of the `head‐to‐head' type in all the studied crystals. The polymorphic structures of 1 differ with respect to the intermolecular interactions between stacked columns. Two of the polymorphs have a columnar or double columnar type of crystal organization, while the third polymorphic structure can be classified as columnar‐layered. The difference between the two structures of 2 is less pronounced. Both crystals can be considered as having very similar arrangements of neighbouring columns. The formation of polymorphic modifications is caused by a subtle balance of very weak intermolecular interactions and packing differences can be identified only using an analysis based on a study of the pairwise interaction energies.     

Synthesis of 3‐Aryl‐2‐methoxyinden‐1‐one (Z)‐Phenylhydrazones via Hydrobromic Acid‐Mediated Cyclization of 2‐(1‐Aryl‐2‐methoxyethenyl)benzaldehyde Phenylhydrazones

2‐(1‐Aryl‐2‐methoxyethenyl)benzaldehydes 2 , obtained by successive treatment of 1‐(1‐aryl‐2‐methoxyethenyl)‐2‐bromobenzenes 1 with BuLi and 1‐formylpiperidine, were transformed to the corresponding phenylhydrazones 3 on treatment with PhNHNH₂. When these hydrazones were allowed to react with conc. HBr, cyclization, followed by dehydrogenation with air occurred, furnished 3‐aryl‐2‐methoxyinden‐1‐one (Z)‐phenylhydrazones 4 .     

CO2‐ and O2‐Sensitive Fluorophenyl End‐Capped Poly(ethylene glycol)

Pentafluorophenyl end‐capped poly(ethylene glycol) (PF‐PEG‐PF) aqueous solution shows a lower critical solution temperature (LCST), which is sensitive to the type of gases dissolved in the solution. LCST increases from 24.5 to 26 °C when dissolved carbon dioxide is replaced by oxygen. The transparent‐to‐turbid transition is reversibly observed when the dissolved carbon dioxide in the PF‐PEG‐PF aqueous solution is exchanged with oxygen, and vice versa, at 24.5 °C. ¹⁹F NMR and ¹H NMR spectra of the PF‐PEG‐PF in D₂O suggest that 1) dehydration of PEG is the main reason of developing LCST of the PF‐PEG‐PF aqueous solution, 2) minute differences in the intermolecular interactions, as demonstrated by changes in the chemical shift of the PF‐PEG‐PF peaks, induce such a difference in LCST. This paper provides a new insight in designing a stimuli‐responsive polymer in that fine tuning of a phase transition can be controlled by the type of dissolved gas.

     

Synthesis of 4‐((2‐hydroxynaphthalen‐1‐yl)(aryl)methyl)‐5‐methyl‐2‐phenyl‐1H‐pyrazol‐3(2H)‐ones using nano‐Zn‐[2‐boromophenyl‐salicylaldimine‐methylpyranopyrazole]Cl2 nanoparticles

Nano‐Zn‐[2‐boromophenyl‐salicylaldimine‐methylpyranopyrazole]Cl₂ (nano‐[Zn‐2BSMP]Cl₂) as a nanoparticle Schiff base complex and a catalyst was introduced for the solvent‐free synthesis of 4‐((2‐hydroxynaphthalen‐1‐yl)(aryl)methyl)‐5‐methyl‐2‐phenyl‐1H‐pyrazol‐3(2H)‐ones by the multicomponent condensation reaction of various aromatic aldehydes, β‐naphthol, ethyl acetoacetate, and phenyl hydrazine at room temperature.     

Efficient Synthesis of Dialkyl (2Z)‐2‐[(E)‐1‐Aryl‐2‐(3‐arylquinoxalin‐2‐yl)ethenyl]but‐2‐enedioates

The reaction of dialkyl acetylenedicarboxylates 4 with 1‐aryl‐2‐[(3‐arylquinoxalin‐2(1H)‐ylidene)ethanones 3 in the presence of Ph₃P leads to dialkyl (2Z)‐2‐[(E)‐1‐aryl‐2‐(3‐arylquinoxalin‐2‐yl)ethenyl]but‐2‐enedioates 1 in good yields.     

Synthesis and Conformational Analysis of 1′‐ and 3′‐Substituted 2‐Deoxy‐2‐fluoro‐D‐ribofuranosyl Nucleosides

Convergent syntheses of the 9‐(3‐X‐2,3‐dideoxy‐2‐fluoro‐β‐D ‐ribofuranosyl)adenines 5 (X=N₃) and 7 (X=NH₂), as well as of their respective α‐anomers 6 and 8 , are described, using methyl 2‐azido‐5‐O‐benzoyl‐2,3‐dideoxy‐2‐fluoro‐β‐D ‐ribofuranoside ( 4 ) as glycosylating agent. Methyl 5‐O‐benzoyl‐2,3‐dideoxy‐2,3‐difluoro‐β‐D ‐ribofuranoside ( 12 ) was prepared starting from two precursors, and coupled with silylated N⁶‐benzoyladenine to afford, after deprotection, 2′,3′‐dideoxy‐2′,3′‐difluoroadenosine ( 13 ). Condensation of 1‐O‐acetyl‐3,5‐di‐O‐benzoyl‐2‐deoxy‐2‐fluoro‐β‐D ‐ribofuranose ( 14 ) with silylated N²‐palmitoylguanine gave, after chromatographic separation and deacylation, the N⁷‐β‐anomer 17 as the main product, along with 2′‐deoxy‐2′‐fluoroguanosine ( 15 ) and its N⁹‐α‐anomer 16 in a ratio of ca. 42 : 24 : 10. An in‐depth conformational analysis of a number of 2,3‐dideoxy‐2‐fluoro‐3‐X‐D ‐ribofuranosides (X=F, N₃, NH₂, H) as well as of purine and pyrimidine 2‐deoxy‐2‐fluoro‐D ‐ribofuranosyl nucleosides was performed using the PSEUROT (version 6.3) software in combination with NMR studies.     

One‐Pot Synthesis of 2‐Substituted 4‐Aryl‐4,5‐dihydro‐3,1‐benzoxazepines from 2‐(2‐Aminophenyl)‐1‐arylethanols via Dehydration of the Corresponding Amides

An efficient method for the preparation of 2‐substituted 4‐aryl‐4,5‐dihydro‐3,1‐benzoxazepine derivatives under mild conditions has been developed. The reaction of 2‐(2‐aminophenyl)ethanols 1 with acid chlorides in the presence of excess Et₃N in THF at room temperature gave the corresponding N‐acylated intermediates 2 , which were dehydrated by treatment with POCl₃ to give 2‐substituted 4‐aryl‐4,5‐dihydro‐3,1‐benzoxazepines 3 in a one‐pot reaction.     

Synthesis and characterization of macroinitiator‐amino terminated PEG and poly(γ‐benzyl‐L‐glutamate)‐PEO‐poly(γ‐benzyl‐L‐glutamate) triblock copolymer

Macroinitiator‐amino terminated poly(ethylene glycol) (PEG) (NH₂‐PEO‐NH₂) was prepared by converting both terminal hydroxyl groups of PEG to more reactive primary amino groups. The synthetic route involved reactions of chloridize, phthalimide and finally hydrazinolysis. Furthermore, poly(γ‐benzyl‐L ‐glutamate)‐poly(ethylene oxide)‐poly(γ‐benzyl‐L ‐glutamate) (PBLG‐PEO‐PBLG) triblock copolymer was synthesized by polymerization of γ‐benzyl‐L ‐glutamate N‐carboxyanhydride (Bz‐L‐GluNCA) using NH₂‐PEO‐NH₂ as macroinitiator. The resultant NH₂‐PEO‐NH₂ and triblock copolymer were characterized by FT‐IR, ¹H‐NMR and gel permeation chromatography (GPC) techniques. The results demonstrated that the degree of amination of the NH₂‐PEO‐NH₂ could be up to 1.95. The molecular weight of the PBLG‐PEO‐PBLG triblock copolymer could be adjusted easily by controlling the molar ratio of Bz‐L ‐Glu NCA to the macroinitiator NH₂‐PEO‐NH₂. Copyright © 2004 John Wiley & Sons, Ltd.     

Metal Derivatives of Heterocyclic Thioamides: Synthesis and Crystal Structures of Copper Complexes with 1‐Methyl‐1,3‐imidazoline‐2‐thione and 1,3‐Imidazoline‐2‐thione

Reactions of copper(I) halides (Cl, Br, I) with 1‐methyl‐1, 3‐imidazoline‐2‐thione (mimzSH) in 1 : 2 molar ratio yielded sulfur‐bridged dinuclear [Cu₂X₂(μ‐S‐mimzSH)₂(η¹‐S‐mimzSH)₂] (X = I, 1 , Br, 2 ; Cl, 3 ) complexes. Copper(I) iodide with 1,3‐imidazoline‐2‐thione (imzSH₂) and Ph₃P in 1 : 1 : 1 molar ratio has also formed a sulfur‐bridged dinuclear [Cu₂I₂(μ‐S‐imzSH₂)₂(PPh₃)₂] ( 4 ) complex. The central Cu(μ‐S)₂Cu cores form parallelograms with unequal Cu–S bond distances {2.324(2), 2.454(3) Å} ( 1 ); {2.3118(6), 2.5098(6) Å} ( 2 ); {2.3075(4), 2.5218(4) Å} ( 3 ); {2.3711(8), 2.4473(8) Å} ( 4 ). The Cu···Cu separations, 2.759–2.877Å in complexes 1 – 3 are much shorter than 3.3446Å in complex 4 . The weak intermolecular interactions {H₂CH···S^# ( 2 ); CH···Cl^# ( 3 ); NH···I^# ( 4 )} between dimeric units in complexes 2 – 4 lead to the formation of linear 1D polymers.     

2‐Azido‐2‐deoxycellulose: Synthesis and 1,3‐Dipolar Cycloaddition

Chitosan ( 1 ) was prepared by basic hydrolysis of chitin of an average molecular weight of 70000 Da, ¹H‐NMR spectra indicating almost complete deacetylation. N‐Phthaloylation of 1 yielded the known N‐phthaloylchitosan ( 2 ), which was tritylated to provide 3a and methoxytritylated to 3b . Dephthaloylation of 3a with NH₂NH₂?H₂O gave the 6‐O‐tritylated chitosan 4a . Similarly, 3b gave the 6‐O‐methoxytritylated 4b . CuSO₄‐Catalyzed diazo transfer to 4a yielded 95% of the azide 5a , and uncatalyzed diazo transfer to 4b gave 82% of azide 5b . Further treatment of 5a with CuSO₄ produced 2‐azido‐2‐deoxycellulose ( 7 ). Demethoxytritylation of 5b in HCOOH gave 2‐azido‐2‐deoxy‐3,6‐di‐O‐formylcellulose ( 6 ), which was deformylated to 7 . The 1,3‐dipolar cycloaddition of 7 to a range of phenyl‐, (phenyl)alkyl‐, and alkyl‐monosubstituted alkynes in DMSO in the presence of CuI gave the 1,2,3‐triazoles 8 – 15 in high yields.     

One‐Pot Syntheses of 2‐(2‐Sulfanyl‐4H‐3,1‐benzothiazin‐4‐yl)acetic Acid Derivatives via Reactions of 3‐(2‐Isothiocyanatophenyl)prop‐2‐enoic Acid Derivatives with Thiols or Sodium Sulfide

Two efficient methods for the preparation of 2‐(2‐sulfanyl‐4H‐3,1‐benzothiazin‐4‐yl)acetic acid derivatives 3 under mild conditions have been developed. The first method is based on the reaction of 3‐(2‐isothiocyanatophenyl)prop‐2‐enoates 1a – 1c with thiols in the presence of Et₃N in THF at room temperature, leading to the corresponding dithiocarbamate intermediates 2 , which underwent spontaneous cyclization at the same temperature by an attack of the S‐atom at the prop‐2‐enoyl moiety in a 1,4‐addition manner (Michael addition) to give 2‐(2‐sulfanyl‐4H‐3,1‐benzothiazin‐4‐yl)acetates in one pot. The second method involves treatment of 3‐(2‐isothiocyanatophenyl)prop‐2‐enoic acid derivatives 1b – 1d with Na₂S leading to the formation of 2‐(2‐sodiosulfanyl‐4H‐3,1‐benzothiazin‐4‐yl)acetic acid intermediates 5 by a similar addition/cyclization sequence, which are then allowed to react with alkyl or aryl halides to afford derivatives 3 . 2‐(2‐Thioxo‐4H‐3,1‐benzothiazin‐4‐yl)acetic acid derivatives 6 can be obtained by omitting the addition of halides.