EF-Tu binding peptides identified,dissected, and affinity optimized by phage display

The highly abundant GTP binding protein elongation factor Tu (EF-Tu) fulfills multiple roles in bacterial protein biosynthesis. Phage-displayed peptides with high affinity for EF-Tu were selected from a library of approximately 4.7 x 10(11) different peptides. The lack of sequence homology among the identified EF-Tu ligands demonstrates promiscuous peptide binding by EF-Tu. Homolog shotgun scanning of an EF-Tu ligand was used to dissect peptide molecular recognition by EF-Tu. All homolog shotgun scanning selectants bound to EF-Tu with higher affinity than the starting ligand. Thus, homolog shotgun scanning can simultaneously optimize binding affinity and rapidly provide detailed structure activity relationships for multiple side chains of a polypeptide ligand. The reported peptide ligands do not compete for binding to EF-Tu with various antibiotic EF-Tu inhibitors, and could identify an EF-Tu peptide binding site distinct from the antibiotic inhibitory sites.     

Amino acid residues in GRK1/GRK7 responsible for interaction with S-modulin/recoverin

GRK1 is a visual pigment kinase in rods and is essential for inactivation of light-activated rhodopsin. The GRK1 activity is inhibited by binding of the Ca(2+)-bound form of S-modulin/recoverin. We previously identified the S-modulin/recoverin site to interact with GRK1. In the present study, we identified its counterpart in GRK1. We synthesized 29 of GRK1 or GRK7 partial peptides that cover the entire sequence of GRK1/GRK7, and examined whether these peptides inhibit S-modulin/recoverin activity most probably by preoccupying the binding site for GRK1. The inhibition was the greatest with the N-terminal peptide (p1, aa 3-23 in GRK7). On mutation of each of eight amino acid residues highly conserved in the p1 region of more than 10 orthologs, the inhibition was significantly reduced in the mutation of Leu(6), Asn(12) and Tyr(15). We further examined the binding of the peptides, including mutated ones, to S-modulin/recoverin with a resonance mirror biosensor. The binding correlated well with the degree of the inhibition by a peptide. The inhibition, therefore, seemed to be due to a direct binding of the kinase peptide to the binding site of active S-modulin/recoverin. A GRK1 region close to its C-terminus also seemed to be the binding site for S-modulin/recoverin.     

Ab initio modelling of the N-terminal domain of the secretin receptors

G protein coupled receptors of the secretin family are activated by peptide hormones of about 30 residues in length. There is considerable sequence homology within both the hormone and receptor families. The receptors possess in addition to the integral membrane domain a characteristic extracellular domain of about 120 residues in length, having conserved cysteine residues, which are involved in disulphide bridge formation, and tryptophanes, which have been shown to be critical for hormone binding. This extracellular domain does not have detectable homology to any known protein fold. In order to be able to propose a structure for this domain we have used ab initio prediction methods combined with constraints based on experimental results for the disulphide connectivity. The results of computational tools for predicting secondary structure and accessibility, together with ligand binding and mutational data and other structural considerations were used in the ab initio protein folding programs DRAGON and GADGET and also the simpler program RAMBLE, which was able to explore different permutations of disulphide bond connectivity, tryptophan side chain orientation and chain topology. The methods generated a limited number of plausible models but no single unique solution was found under the constraints. One of these was refined into a full atomic model that contained a possible peptide binding site comprising the most conserved residues.     

Contribution of individual zinc ligands to metal binding and peptide folding of zinc finger peptides

Little is known about the contribution of individual zinc-ligating amino acid residues for coupling between zinc binding and protein folding in zinc finger domains. To understand such roles of each zinc ligand, four zinc finger mutant peptides corresponding to the second zinc finger domain of Sp1 were synthesized. In the mutant peptides, glycine was substituted for one of four zinc ligands. Their metal binding and folding properties were spectroscopically characterized and compared to those of the native zinc finger peptide. In particular, the electronic charge-transfer and d-d bands of the Co(II)-substituted peptide complexes were used to examine the metal coordination number and geometry. Fluorescence emission studies revealed that the mutant peptides are capable of binding zinc despite removing one ligand. Circular dichroism results clearly showed the induction of an alpha-helix by zinc binding. In addition, the structures of certain mutant zinc finger peptides were simulated by molecular dynamics calculation. The information indicates that His23 and the hydrophobic core formed between the alpha-helix and the beta-sheet play an essential role in alpha-helix induction. This report demonstrates that each ligand does not contribute equally to alpha-helix formation and coordination geometry in the zinc finger peptide.     

Affinity-guided protein conjugation: the trilogy of covalent protein labeling,assembly and inhibition

Specific and dynamic biological interactions pave the blueprint of signal networks in cell. For example, a great variety of specific protein-ligand interactions define how intracellular signals flow. Taking advantage of the specificity of these interactions, we postulate an “affinity-guided covalent conjugation” strategy to lock binding ligands through covalent reactions between the ligand and the receptor protein. The presence of a nucleophile close to the ligand binding site of a protein is sine qua none of this reaction. Specific noncovalent interaction of a ligand derivative (which contains an electrophile at a designed position) to the ligand binding site of the protein brings the electrophile to the close proximity of the nucleophile. Subsequently, a conjugation reaction spontaneously takes place between the nucleophile and the electrophile, and leads to an intermolecular covalent linkage. This strategy was first showcased in coiled coil peptides which include a cysteine mutation at a selected position. The short peptide sequence was used for covalent labeling of cell surface receptors. The same strategy was then used to guide the design of a set of protein Lego bricks for covalent assembly of protein complexes of unnatural geometry. We finally made “reactive peptides” for natural adaptor proteins that play significant roles in signal transduction. The peptides were designed to react with a single domain of the multidomain adaptor protein, delivered into the cytosol of neurons, and re-directed the intracellular signal of neuronal migration. The trilogy of protein labeling, assembly, and inhibition of intracellular signals, all through a specific covalent bond, fully demonstrated the generality and versatility of “affinity-guided covalent conjugation” in various applications.     

Design and spectroscopic characterization of peptide models for the plastocyanin copper-binding loop

The Cu(II)- and Co(II)-binding properties of two peptides, designed on the basis of the active site sequence and structure of the blue copper protein plastocyanin, are explored. Peptide BCP-A, Ac-Trp-(Gly)(3)-Ser-Tyr-Cys-Ser-Pro-His-Gln-Gly-Ala-Gly-Met-(Gly )(3)-His-(Gly)(2)-Lys-CONH(2), conserves the Cu-binding loop of plastocyanin containing three of the four copper ligands and has a flexible (Gly)(3) linker to the second His ligand. Peptide BCP-B, Ac-Trp-(Gly)(3)-Cys-Gly-His-Gly-Val-Pro-Ser-His-Gly-Met-Gly-CONH(2), contains all four blue copper ligands, with two on either side of a beta-turn. Both peptides form 1:1 complexes with Cu(II) through His and Cys ligands. BCP-A, the ligand loop, binds to Cu(II) in a tetrahedrally distorted square plane with axial solvent ligation, while BCP-B-Cu(II) has no tetrahedral distortion in aqueous solution. In methanolic solution, distortion of the square plane is evident for both BCP-Cu(II) complexes. Tetrahedral Co(II) complexes are observed for both peptides in aqueous solution but with 4:2 peptide:Co(II) stoichiometries as estimated by ultracentrifugation. Cu(II) reduction potentials for the aqueous peptide-Cu(II) complexes were measured to be +75 +/- 30 mV vs NHE for BCP-A-Cu(II) and -10 +/- 20 mV vs NHE for BCP-B-Cu(II). The results indicate that the plastocyanin ligand loop can act as a metal-binding site with His and Cys ligands in the absence of the remainder of the folded protein but, by itself, cannot stabilize a type 1 copper site, emphasizing the role of the protein matrix in protecting the Cu binding site from solvent exposure and the Cys from oxidation.     

Identifying sites of protein modification by using matrix-assisted laser desorption/ionization-time-of-flight mass spectrometry and on-line membrane preconcentration-capillary electrophoresis-tandem mass spectrometry

A strategy for rapidly identifying the number and sites of chemical or posttranslational modification of proteins is described. The use of matrix-assisted laser desorption/ionization-time-of-flight-mass spectrometry to determine the molecular weight of the adducted protein as well as map the proteolytic digest of peptides offers a rapid method to screen for the possible site of adduction. To unequivocally determine the amino acid sequence of the peptide bearing the adduct as well as structurally characteize the covalent modification, the peptide mixture is subjected to membrane preconcentration-capillary electrophoresis-mass spectrometry and tandem mass spectrometry (mPC-CE-MS/MS). The high resolving separation capability of capillary electrophoresis (CE) afford a chromatograhic step that lends itself to separation of complex mixtures of peptides with minimal sample loss. The membrane preconcentration-CE cartridge allows sample loading volumes 10,000-fold greater than conventional CE. In this work the binding site of the fluorescent label acrylodan to the intestinal fatty binding protein is characterized and shown to be covalently bound at lysine-27, by using mPC-CE-MS/MS.     

A high-affinity metal-binding peptide from Escherichia coli HypB

The high-affinity nickel-binding site of the Escherichia coli [NiFe]-hydrogenase accessory protein HypB was localized to residues at the immediate N-terminus of the protein. Modification of a metal-binding fusion protein, site-directed mutagenesis experiments, and DFT calculations were used to identify the N-terminal amine as a ligand as well as the three cysteine residues in the CXXCGCXXX motif. This sequence can be removed from the protein and both a synthesized peptide and a protein fusion bind nickel with a similar affinity and the same structure as the parent metalloprotein, indicating the self-sufficiency of this high-affinity nickel-binding sequence.     

Reversed-phase liquid chromatography as a tool in the determination of the hydrophilicity/hydrophobicity of amino acid side-chains at a ligand-receptor interface in the presence of different aqueous environments. II. Effect of varying peptide ligand hydrophobicity

The present study represents a continuation of our development of a chromatographic model for studying the hydrophobic interactions which characterize the way a ligand binds to its receptor. We have designed 18-residue amphipathic alpha-helical peptides (representing the hydrophobic binding domain of a ligand), where the non-polar face interacts with the non-polar face of a reversed-phase stationary phase (representing a receptor protein with a hydrophobic binding pocket). Two series of amphipathic alpha-helical peptides were subjected to reversed-phase liquid chromatography at pH 2.0, where the "native" Ala-face peptide contains seven Ala residues in its non-polar face and the "native" Leu-face series contains seven Leu residues in its non-polar face. Mutants of the two series were then prepared by replacing one residue in the centre of the non-polar face in both series of peptides, resulting in amino acid side-chains being exposed to a moderately non-polar environment (Ala series) or a very hydrophobic environment (Leu series) surrounding the substitution site. With this model, we have demonstrated that an increase in non-polarity of the ligand enhances hydrophilicity (decreases hydrophobicity) of all amino acids at the ligand-receptor interface, this effect being dependent on the intrinsic hydrophilicity/hydrophobicity of the side-chain. The addition of salt to the aqueous environment surrounding the binding site of the ligand and receptor was also shown to affect the hydrophilicity/hydrophobicity of amino acids in the binding interface. For the Ala-face mutants, the majority of the non-polar side-chains and the three positively charged residues (Arg, His, Lys) showed significant enhancement of hydrophobicity in the presence of salt; in contrast, in the much more hydrophobic environment of the Leu-face mutants, there was a trend of lesser hydrophobicity enhancement and/or significantly more hydrophilicity enhancement in the presence of salt. Our results should have major implications for the understanding of the hydrophilicity/ hydrophobicity of side-chains in varying hydrophobic and aqueous environments.     

‘Fixed charge’ chemical derivatization and data dependant multistage tandem mass spectrometry for mapping protein surface residue accessibility

Protein surface accessible residues play an important role in protein folding, protein-protein interactions and protein-ligand binding. However, a common problem associated with the use of selective chemical labeling methods for mapping protein solvent accessible residues is that when a complicated peptide mixture resulting from a large protein or protein complex is analyzed, the modified peptides may be difficult to identify and characterize amongst the largely unmodified peptide population (i.e., the ‘needle in a haystack’ problem). To address this challenge, we describe here the development of a strategy involving the synthesis and application of a novel ‘fixed charge’ sulfonium ion containing lysine-specific protein modification reagent, S,S′-dimethylthiobutanoylhydroxysuccinimide ester (DMBNHS), coupled with capillary HPLC-ESI-MS, automated CID-MS/MS, and data-dependant neutral loss mode MS³ in an ion trap mass spectrometer, to map the surface accessible lysine residues in a small model protein, cellular retinoic acid binding protein II (CRABP II). After reaction with different reagent:protein ratios and digestion with Glu-C, modified peptides are selectively identified and the number of modifications within each peptide are determined by CID-MS/MS, via the exclusive neutral loss(es) of dimethylsulfide, independently of the amino acid composition and precursor ion charge state (i.e., proton mobility) of the peptide. The observation of these characteristic neutral losses are then used to automatically ‘trigger’ the acquisition of an MS³ spectrum to allow the peptide sequence and the site(s) of modification to be characterized. Using this approach, the experimentally determined relative solvent accessibilities of the lysine residues were found to show good agreement with the known solution structure of CRABP II.     

Mapping a Noncovalent Protein–Peptide Interface by Top-Down FTICR Mass Spectrometry Using Electron Capture Dissociation

Noncovalent protein–ligand and protein–protein complexes are readily detected using electrospray ionization mass spectrometry (ESI MS). Furthermore, recent reports have demonstrated that careful use of electron capture dissociation (ECD) fragmentation allows covalent backbone bonds of protein complexes to be dissociated without disruption of noncovalent protein–ligand interactions. In this way the site of protein–ligand interfaces can be identified. To date, protein–ligand complexes, which have proven tractable to this technique, have been mediated by ionic electrostatic interactions, i.e., ion pair interactions or salt bridging. Here we extend this methodology by applying ECD to study a protein–peptide complex that contains no electrostatics interactions. We analyzed the complex between the 21 kDa p53-inhibitor protein anterior gradient-2 and its hexapeptide binding ligand (PTTIYY). ECD fragmentation of the 1:1 complex occurs with retention of protein–peptide binding and analysis of the resulting fragments allows the binding interface to be localized to a C-terminal region between residues 109 and 175. These finding are supported by a solution-phase competition assay, which implicates the region between residues 108 and 122 within AGR2 as the PTTIYY binding interface. Our study expands previous findings by demonstrating that top-down ECD mass spectrometry can be used to determine directly the sites of peptide–protein interfaces. This highlights the growing potential of using ECD and related top-down fragmentation techniques for interrogation of protein–protein interfaces.     

Effects of sequence context on the binding of tryptophan-containing peptides by the cucurbit[8]uril–methyl viologen complex

This paper describes a novel assay for measuring the relative extent of peptide binding in a large parallel format and the use of this assay to explore the effects of sequence context on the binding of tryptophan (Trp)-containing peptides by the synthetic receptor comprising the noncovalent complex between cucurbit[8]uril and methyl viologen (i.e. Q8√MV). The extent of quenching of Trp fluorescence upon binding to Q8√MV was used to measure the relative extent of binding and thus the relative affinities of 104 Trp-containing peptides, in parallel, using a fluorescence plate reader. This study resulted in the remarkable observation that the identity of the amino acid residues at positions adjacent to the Trp-binding site has little if any influence on the binding affinity. This finding suggests that Q8√MV should be effective for the recognition of Trp residues within a broad range of peptide sequences.     

Identification of small molecule binding sites within proteins using phage display technology

Affinity selection of peptides displayed on phage particles was used as the basis for mapping molecular contacts between small molecule ligands and their protein targets. Analysis of the crystal structures of complexes between proteins and small molecule ligands revealed that virtually all ligands of molecular weight 300 Da or greater have a continuous binding epitope of 5 residues or more. This observation led to the development of a technique for binding site identification which involves statistical analysis of an affinity-selected set of peptides obtained by screening of libraries of random, phage-displayed peptides against small molecules attached to solid surfaces. A random sample of the selected peptides is sequenced and used as input for a similarity scanning program which calculates cumulative similarity scores along the length of the putative receptor. Regions of the protein sequence exhibiting the highest similarity with the selected peptides proved to have a high probability of being involved in ligand binding. This technique has been employed successfully to map the contact residues in multiple known targets of the anticancer drugs paclitaxel (Taxol), docetaxel (Taxotere) and 2-methoxyestradiol and the glycosaminoglycan hyaluronan, and to identify a novel paclitaxel receptor [1]. These data corroborate the observation that the binding properties of peptides displayed on the surface of phage particles can mimic the binding properties of peptides in naturally occurring proteins. It follows directly that structural context is relatively unimportant for determining the binding properties of these disordered peptides. This technique represents a novel, rapid, high resolution method for identifying potential ligand binding sites in the absence of three-dimensional information and has the potential to greatly enhance the speed of development of novel small molecule pharmaceuticals.     

Rational dissection of binding surfaces for mimicking of discontinuous antigenic sites

Peptide-based approaches to mimicking protein interactive regions have relied mainly on linear peptides; however, most binding sites are discontinuous and thus not easily reproducible by a linear sequence. Any attempt to replicate those sites by chemical means must not only integrate all residues involved in the recognition but also provide structural organization to native-like levels. Here we describe a surface mimic approach to the reconstruction of such complex molecular architectures, using as a model a discontinuous antigenic site of foot-and-mouth disease virus that is defined by residues belonging to three different capsid proteins. Our surface mimics are synthetic cyclic peptides, designed in silico, capable of binding antibodies directed to this site, and with demonstrated functional capabilities as vaccines in guinea pigs. Further, by saturation transfer difference NMR, we have determined several antibody binding residues on these peptides.     

Potentials of mean force for acetylcholine unbinding from the alpha7 nicotinic acetylcholine receptor ligand-binding domain

The nicotinic acetylcholine receptor is a prototype ligand-gated ion channel that mediates signal transduction in the neuromuscular junctions and other cholinergic synapses. The molecular basis for the energetics of ligand binding and unbinding is critical to our understanding of the pharmacology of this class of receptors. Here, we used steered molecular dynamics to investigate the unbinding of acetylcholine from the ligand-binding domain of human alpha7 nicotinic acetylcholine receptor along four different predetermined pathways. Pulling forces were found to correlate well with interactions between acetylcholine and residues in the binding site during the unbinding process. From multiple trajectories along these unbinding pathways, we calculated the potentials of mean force for acetylcholine unbinding. Four available methods based on Jarzynski's equality were used and compared for their efficiencies. The most probable pathway was identified to be along a direction approximately parallel to the membrane. The derived binding energy for acetylcholine was in good agreement with that derived from the experimental binding constant for acetylcholine binding protein, but significantly higher than that for the complete human alpha7 nicotinic acetylcholine receptor. In addition, it is likely that several intermediate states exist along the unbinding pathways.     

Sequence, structure, and function of peptide self-assembled monolayers

Cysteine is commonly used to attach peptides onto gold surfaces. Here we show that the inclusion of an additional linker with a length of four residues (-PPPPC) and a rigid, hydrophobic nature is a better choice for forming peptide self-assembled monolayers (SAMs) with a well-ordered structure and high surface density. We compared the structure and function of the nonfouling peptide EKEKEKE-PPPPC-Am with EKEKEKE-C-Am. Circular dichroism, attenuated total internal reflection Fourier transform IR spectroscopy, and molecular dynamics results showed that EKEKEKE-PPPPC-Am forms a secondary structure while EKEKEKE-C-Am has a random structure. Surface plasmon resonance sensor results showed that protein adsorption on EKEKEKE-PPPPC-Am/gold is very low with small variation while protein adsorption on EKEKEKE-C-Am/gold is high with large variation. X-ray photoelectron spectroscopy results showed that both peptides have strong gold-thiol binding with the gold surface, indicating that their difference in protein adsorption is due to their assembled structures. Further experimental and simulation studies were performed to show that -PPPPC is a better linker than -PC, -PPC, and -PPPC. Finally, we extended EKEKEKE-PPPPC-Am with the cell-binding sequence RGD and demonstrated control over specific versus nonspecific cell adhesion without using poly(ethylene glycol). Adding a functional peptide to the nonfouling EK sequence avoids complex chemistries that are used for its connection to synthetic materials.     

Temperature selectivity effects in reversed-phase liquid chromatography due to conformation differences between helical and non-helical peptides

In order to characterize the effect of temperature on the retention behaviour and selectivity of separation of polypeptides and proteins in reversed-phase high-performance liquid chromatography (RP-HPLC), the chromatographic properties of four series of peptides, with different peptide conformations, have been studied as a function of temperature (5-80 degrees C). The secondary structure of model peptides was based on either the amphipathic alpha-helical peptide sequence Ac-EAEKAAKEX(D/L)EKAAKEAEK-amide, (position X being in the centre of the hydrophobic face of the alpha-helix), or the random coil peptide sequence Ac-X(D/L)LGAKGAGVG-amide, where position X is substituted by the 19 L- or D-amino acids and glycine. We have shown that the helical peptide analogues exhibited a greater effect of varying temperature on elution behaviour compared to the random coil peptide analogues, due to the unfolding of alpha-helical structure with the increase of temperature during RP-HPLC. In addition, temperature generally produced different effects on the separations of peptides with different L- or D-amino acid substitutions within the groups of helical or non-helical peptides. The results demonstrate that variations in temperature can be used to effect significant changes in selectivity among the peptide analogues despite their very high degree of sequence homology. Our results also suggest that a temperature-based approach to RP-HPLC can be used to distinguish varying amino acid substitutions at the same site of the peptide sequence. We believe that the peptide mixtures presented here provide a good model for studying temperature effects on selectivity due to conformational differences of peptides, both for the rational development of peptide separation optimization protocols and a probe to distinguish between peptide conformations.     

Exclusive Use of High Pressure Liquid Chromatography for the Determination of the Complete Amino Acid Sequence of the 12K Fragment of Avian Sarcoma Virus Structural Protein p27

Abstract

Using exclusively high pressure liquid chromatography for the protein and peptide separation complete primary structure of the 12,000 molecular weight (12K) amino terminal (1–87 residues) fragment obtained by mild acid hydrolysis of p27 (Avian Sarcoma Virus structural protein) has been determined. The sequence was established by direct degradation of the native molecule and its (12K) peptides isolated by molecular exclusion and reverse phase HPLC.