Quadrature fringes wide-field optical coherence tomography and its applications to biological tissues

We propose and demonstrate quadrature fringes wide-field optical coherence tomography (QF WF OCT) to expand an optical Hilbert transformation to two-dimensions. This OCT simultaneously measures two quadrature interference images using a single InGaAs CCD camera to obtain en face OCT images. The axial and lateral resolutions are measured at 29 μm in air and 70 μm limited by a pixel size of camera using a superluminescent diode with a wavelength of 1.3 μm as the light source; the system sensitivity is determined to be −90 dB. The area of the en face OCT images is 4.0 mm × 4.0 mm (160 × 160  pixels). The OCT images are measured axially with steps of 10 μm. The en face OCT images of a in vivo human fingertip and a in situ rat brain are three-dimensionally measured up to the depth of about 3 mm with some degradations of a lateral resolution.     

In vivo imaging of dynamic biological specimen by real-time single-shot full-field optical coherence tomography

We demonstrate the feasibility of a compact single-shot full-field time domain optical coherence tomography (OCT) for imaging dynamic biological sample in real-time. The system is based on a Linnik type polarization Michelson interferometer and a four-quadrature phase-stepper optics, which can simultaneously capture four quadraturely phase-stepped interferograms on a single CCD. Using a superluminescent diode as light source with center wavelength of 842 nm and spectral width of 16.2 nm, the system yields an axial resolution of 19.8 μm, and covers a field of view of 280 × 320 μm² (220 × 250 pixels) with a transverse resolution of 4.4 μm by using a 10× microscope objective (0.3 NA). Three-dimensional OCT images of biological samples such as an onion slice and a diaptomus were obtained without any image averaging or pixel binning. In addition, in vivo depth resolved dynamic imaging was demonstrated to show the beating internal structure of a diaptomus with a fame rate of 5 fps.     

Optical probe using eccentric optics for optical coherence tomography

We propose and demonstrate an OCT optical probe using eccentric optics. This probe enabled both forward imaging and side imaging by dividing a circular scanning area into two semicircular scanning areas using an external motor to rotate the flexible tube. The outer diameter of the probe was 2.6 mm, and its rigid portion length was 10 mm. The lateral resolution was 23 μm, and the eccentric radius was 1.1 mm. The circumferential length in scanning was 6.9 mm, and the working distance was 5 mm. OCT images of 1.5 mm × 6.9 mm (in tissue, axial × circumference), including forward image and side image, were measured with the axial resolution of 19 μm in air and a frame rate of one frame per second. The epidermis, dermis, and sweat gland of in vivo human ventral finger tips were observed.     

Non-destructive quantification of pharmaceutical tablet coatings using terahertz pulsed imaging and optical coherence tomography

Optical coherence tomography (OCT) and terahertz pulsed imaging (TPI) are two powerful techniques allowing high quality cross-sectional images from within scattering media to be obtained non-destructively. In this paper, we report experimental results of using OCT and TPI for quantitatively characterizing pharmaceutical tablet coatings in the thickness range of 10-140 μm. We found that the spectral OCT system developed in-house has an axial resolution of 0.9 μm, and is capable of quantifying very thin coatings in the range of 10-60 μm. The upper limit of 60 μm within the tablet coating and core is owed to the strong scattering of OCT light, which has relatively short wavelengths in the range of 0.5-1.0 μm. On the other hand, TPI utilizes terahertz radiation that has substantially long wavelengths in the range of hundreds of microns, and thus is less prone to the scattering problem. Consequently TPI has been demonstrated to be able to quantify thicker coatings in the range of 40-140 μm and beyond. We concluded that OCT and TPI are two complementary analytical techniques for non-destructive and quantitative characterization of pharmaceutical tablet coatings.     

Optical Coherence Tomography Implemented by Photonic Crystal Fiber

We report a photonic crystal fiber (PCF)-based optical coherence tomography (OCT) system, in which conventional single-mode fiber for the transmission line and the fiber coupler for the beam splitter/combiner are replaced with PCF and PCF coupler. The PCF coupler fabricated using the fused biconical tapered (FBT) method showed a nearly flat coupling ratio over a broad spectral bandwidth of 400 nm, which provided an axial resolution of 3-μm for OCT imaging. With a white-light source, the 8-μm thick air gap between two stacked cover glasses was measured, and with a conventional superluminecent diode (SLD) source, the in vitro images of rat eye and Misgurnus mizolepis skin were successfully obtained. The PCF and PCF coupler might enable a white-light as the source for the cost effective and high-resolution OCT system.     

Ultra-High Resolution Optical Coherence Tomography (OCT) Using a Halogen Lamp as the Light Source

The axial resolution of optical coherence tomography (OCT) is determined by the coherence length of the light source. We demonstrate for the first time high-resolution OCT of biological tissue using a halogen lamp as the light source for a low coherence interferometer. High-resolution OCT imaging with 3.5 μm resolution was performed successfully for onion and porcine skin, although the coherence light power for illumination of a sample is as small as 100 nW.     

Visualization of hair follicles using high-speed optical coherence tomography based on a Fourier domain mode locking laser

In this study, a swept-source optical coherence tomography (SS-OCT) system with a Fourier domain mode locking (FDML) laser is proposed for a dermatology study. The homemade FDML laser is one kind of frequency-sweeping light source, which can provide output power of >20 mW and an output spectrum of 65 nm in bandwidth centered at 1300 nm, enabling imaging with an axial resolution of 12 μm in the OCT system. To eliminate the forward scans from the laser output and insert the delayed backward scans, a Mach-Zehnder configuration is implemented. Compared with conventional frequency-sweeping light sources, the FDML laser can achieve much higher scan rates, as high as ∼240 kHz, which can provide a three-dimensional imaging rate of 4 volumes/s. Furthermore, the proposed high-speed SS-OCT system can provide three-dimensional (3D) images with reduced motion artifacts. Finally, a high-speed SS-OCT system is used to visualize hair follicles, demonstrating the potential of this technology as a tool for noninvasive diagnosis of alopecia.     

Fabry-Perot interference-based fiber-optic sensor for small displacement measurement

A simple fiber-optic sensor based on Fabry-Perot interference for small displacement measurement is investigated both theoretically and experimentally. A broadband light source is coupled into a Fabry-Perot cavity formed by the surfaces of a sensing fiber end and the measured object. The interference signals from the cavity are reflected back into the same fiber. A small displacement via changes in cavity length can be obtained by measuring the wavenumber spacing of the interference fringes. The experimental data meet with the theoretical values very well. Given the light source bandwidth of 40 nm and the initial distance of 30 μm, the proposed displacement sensing system could achieve high resolution measurement of 16 nm.     

Demonstration of a no-moving-parts axial scanning confocal microscope using liquid crystal optics

For the first time, to the best of authors’ knowledge, a no-moving-parts axial scanning confocal microscope (ASCM) system is designed and demonstrated using a combination of a large diameter liquid crystal (LC) lens and a classical microscope objective lens. By electrically controlling the 5 mm diameter LC lens, the 633 nm wavelength focal spot is moved continuously over a 48 μm range with a measured 3-dB axial resolution of 3.1 μm using a 0.65 numerical aperture (NA) micro-objective lens. The ASCM is successfully used to image an Indium Phosphide (InP) twin square optical waveguide sample with a 10.2 μm waveguide pitch and 2.3 μm height and width. Using fine analog electrical control of the LC lens, a super-fine sub-wavelength axial resolution of 270 nm is demonstrated. The proposed ASCM can be useful in various precision three-dimensional (3D) imaging and profiling applications.     

利用变迹术和相干门相结合实现光学相干层析成像术轴向超分辨

光学相十层析成像（光学相干层析成像术）的轴向分辨力由光源带宽和探测光束的聚焦条件共同决定。提高光学相干层析成像术轴向分辨力的方法主要基于带宽光源技术。提出了一种将变迹术与光学相十层析成像术相干门有机结合的方法来提高其轴向分辨力。通过适当形式的光瞳滤波器．使光学相干层析成像术系统轴向响应的主瓣宽度缩小到相干门之内,而其旁瓣则处于相干门之外．不对相干成像产生有效贡献。这样．就能在光源带宽不变的条件下,有效提高光学相十层析成像术的轴向分辨力,避免了采用宽带光源所带来的费用昂贵和系统复杂等缺陷。     

基于法布里-珀罗调谐滤波器的傅里叶域锁模扫频激光光源

报道了一个光纤型1300 nm波段的傅里叶域锁模(Fourier domain mode locking, FDML)扫频激光光源, 用于扫频光学相干层析成像技术 (optical coherence tomography, OCT) 成像. 本实验扫频激光光源采用包含增益介质、调谐滤波器和延迟线组成的长腔激光谐振腔以及光功率增强单元. FDML扫频激光光源具有快速和高度稳定运转模式, 相位稳定性好. 基于法布里-珀罗调谐滤波器(fiber Fabry-Perot tunable filter, FFP-TF)的FDML扫频激光光源扫频范围为130 nm, 半高全宽为70 nm, 输出平均功率是11 mW. 与基于FFP-TF的短腔的扫频光源做了对比研究, FDML扫频光源速度从短腔的8 kHz提高到了48.12 kHz, 对应生物组织OCT成像轴向分辨率为7.8 μm, 比短腔的减小了1.9 μm. 关键词： 光学相干层析技术 扫频激光光源 傅里叶域锁模 法布里-珀罗调谐滤波器     

Wavelength division multiplexed confocal microscopy using supercontinuum

We investigate both theoretically and experimentally wavelength division multiplexed confocal imaging by using white light supercontinuum. We show that with the optimized pinhole diameter an axial resolution of 0.75 μm and detection efficiency of 80% can be achieved. In addition, we applied the axial WDM confocal system to 3D surface measurement and the result agreed well with that measured by commercially available surface profilometer. The measured sensitivity of the system is 3.25 nm. Finally, we demonstrated lateral confocal imaging by using supercontinuum. An effective lateral scanning range of 130 μm was obtained.     

Modeling of arrayed waveguide grating for wavelength interrogation application

We have proposed and discussed a design of arrayed waveguide grating (AWG) for the application of wavelength interrogation. The spectral responses of a silica-based 16 channel AWG with channel spacing 1.6 nm have been simulated when different receiver waveguide spacing are used. It was found that the 3-dB bandwidth is reduced about 50% as the receiver waveguide spacing increasing from 20 μm to 30 μm. The effect of bandwidth of the spectral response on wavelength resolution of AWG based interrogator has been estimated and discussed.     

Spectral Filtering in OCT System Implemented by Mechanically Induced Long-Period Fiber Grating

A spectral filtering method that can enhance the axial resolution and suppress sidelobes of the point spread function in Optical Coherence Tomography (OCT) system is demonstrated. A mechanically induced long-period fiber grating (MLPG) is used to tailor the spectral shape of a homemade Er-doped fiber amplified spontaneous emission (ASE) source. By using a MLPG, the high and narrow characteristic peak, centered at 1533 nm, of the ASE source was fairly well removed, which enabled us to use a broader spectral bandwidth of the source. The experimental results show that the proposed spectral filtering method can suppress the sidelobes in the axial point spread function up to 5.4 dB and thus enhance the axial resolution of an OCT system by four times. The OCT images of an extracted human premolar taken with and without the spectral filtering are presented and compared with each other.     

基于光程编码与相干合成的三维超分辨术

光学相干层析成像的轴向分辨率和横向分辨率是互为独立的,其轴向分辨率由系统光源带宽和探测光束的聚焦条件共同决定,而横向分辨率由系统样品臂的聚焦条件决定. 提高光学相干层析成像的轴向分辨率的方法主要基于宽带光源技术以及变迹术与相干门相结合的方法,而这些方法对于横向分辨率并没有提高. 提出了一种通过光程编码与相干合成的方法,可以同时提高其轴向分辨率和横向分辨率. 通过在光学相干层析成像系统的样品臂中加入光程编码分束器形成多种对应不同光程延迟的有效响应函数,基于光学相干层析成像术固有的光程分辨能力可以得到同一样品对应于不同有效响应函数的多幅图像. 通过数字控制不同有效响应函数的相对贡献对其进行相干合成,可以同时实现轴向和横向的超分辨效果. 与以前的方法相比,光程编码与相干合成方法简单易行、成本低廉,不仅可以避免系统复杂和价格昂贵等不足,而且可以同时较大幅度地提高系统的轴向分辨率和横向分辨率. 关键词： 光学相干层析成像 轴向超分辨 横向超分辨 光程编码     

Broadband difference frequency generation around 4.2 μm at overlapped phase-match conditions

Broadband difference frequency generation is theoretically and experimentally confirmed. It is shown that a wide tunable range of greater than 220 nm (FWHM) around 4.2 μm can be obtained in a 40 mm long periodically poled lithium niobate crystal with a single quasi-phase-matched period at a certain temperature. The broad bandwidth can be explained by means of the group-velocity matching or phase-mismatch minimization at overlapped phase-match conditions. The result shows that the broadband mid-infrared (mid-IR) laser source may find profound applications in trace gases detection of multiple atmospheric species and high resolution spectroscopy.     

Submicrometer axial resolution optical coherence tomography

Optical coherence tomography (OCT) with unprecedented submicrometer axial resolution achieved by use of a photonic crystal fiber in combination with a compact sub-10-fs Ti:sapphire laser (Femtolasers Produktions) is demonstrated for what the authors believe is the first time. The emission spectrum ranges from 550 to 950 nm (lambda(c)=725 nm , P(out)=27 mW) , resulting in a free-space axial OCT resolution of ~0.75 mum , corresponding to ~0.5 mum in biological tissue. Submicrometer-resolution OCT is demonstrated in vitro on human colorectal adenocarcinoma cells HT-29. This novel light source has great potential for development of spectroscopic OCT because its spectrum covers the absorption bands of several biological chromophores.     

High resolution spectral-domain optical coherence tomography using a thermal light source

A high resolution spectral-domain optical coherence tomography (SD-OCT) system based on a thermal light source was presented. A novel normalized method was introduced to remove the background noise and the DC noise of the interference spectrum. A Gaussian spectral calibration procedure was performed to improve axial resolution and image quality before reconstructing OCT image. With the proposed method, the quality of the obtained images was greatly improved. Two-dimensional (2D) cross-sectional images with axial resolution of 1.2?μm were obtained. Furthermore, the film thickness of single-layer film sample was obtained. The experimental result demonstrates the SD-OCT system has potential for film thickness measurement and surface topography.     

Experimental generation of high-contrast Talbot images with an ultrashort laser pulse

A femtosecond Ti:sapphire laser oscillator emitting pulses with 800 nm central wavelength, 10.9 fs pulse width, and 75 MHz repetition rate, combined with a dispersion-compensated diffractive system, was used to implement a large-area, high-contrast, broadband optical interference technique based on the Talbot effect. Chromatic artifacts associated with the huge spectrum of the optical source (approximately 150 nm) are compensated for with an air-separated hybrid diffractive-refractive lens doublet. The spatial resolution of the chromatically compensated Talbot images under femtosecond illumination is nearly identical to that achieved under continuous wave monochromatic illumination. Furthermore, the temporal width of the signal at the Talbot planes is limited by the group-delay-dispersion coefficient which is shown to be small. High-contrast one-dimensional periodic structures of 96.1 μm spacing generated by Talbot diffractometry are experimentally demonstrated.     

基于旋转扫描探头的OCT内窥成像系统设计

为了同时获取样品的表面和深度信息,研究光学相干层析的成像原理,建立了基于光学相干层析技术的内窥系统,实现了旋转扫描成像,系统的工作波长为1 310 nm,工作带宽为80 nm.理论推导及计算机仿真得到了系统信噪比与干涉仪的分光比、反射率之间的关系并分析了理论分辨率和探测深度.提出外径为5 mm的内窥镜扫描探头,聚焦距离为12 mm,数值孔径NA为0.47,折射率分布常量A=0.218 7.利用微型电机驱动直角棱镜实现扫描,旋转速度为25 rpm,旋转一周得到640个采样点.采用多层盖玻片和洋葱表皮作为样品进行实验分析,得到了盖玻片和洋葱的图像,横向分辨率和纵向分辨率分别为10 μm和15 μm.结果表明,设计的光学相干层析内窥系统能够用于旋转扫描成像,获取更多的组织信息.