聚合物电致发光材料及其发光颜色调节的研究进展

聚合物电致发光材料已成为功能材料研究领域的一个热点.与无机材料和有机小分子材料相比,聚合物发光材料具有来源广泛、易加工成型、通过分子结构设计可调节发光颜色等优点,成为制备大面积、低成本、全色柔性显示器件的首选材料.本文介绍了聚合物发光材料的发光机理及调节发光颜色的常用方法,综述了聚对苯乙炔类、聚对苯类、聚芴类等多种共轭聚合物发光材料的合成及发光颜色调节的研究现状,并对聚合物发光材料的发展趋势以及聚合物电致发光器件的制备进行了评述和展望.     

力刺激响应发光聚合物

具有力刺激响应发光特性的聚合物材料是刺激响应发光材料的重点研究方向,在聚合物力化学、应力检测、聚合物损伤监控、特种包装材料等领域受到了化学家和材料学家的广泛关注。这类材料通常是将具有力刺激响应发光特性的小分子作为发光力敏团,通过化学键合或物理掺杂的方式引入聚合物基体中制备得到。力刺激作用通过聚合物基体传导到发光力敏团,引起发光信号变化,实现力刺激响应发光。本文结合发光力敏团的力刺激响应发光原理和力刺激响应发光聚合物的制备方法,对力刺激响应发光聚合物进行了综述,期望对力刺激响应发光聚合物的研发设计和实际应用提供借鉴。     

电磷光发光聚合物*

电致磷光材料可以同时利用单线态和三线态激子发光,具有较高的发光效率,受到人们广泛的关注。本文综述了近年来通过共价键将磷光配合物单元连接在高分子链上制备电磷光发光聚合物的研究进展。总结了主链型、侧链型以及超支化结构的电磷光发光聚合物的研究进展,评述了上述几类电磷光聚合物的发光性能与分子结构的关系。最后从电磷光发光聚合物的分子结构设计出发,在电磷光发光聚合物领域业已取得进展的基础上,分析了电磷光发光聚合物在电致发光领域应用中存在的一些问题,并展望了电磷光聚合物今后的发展方向。     

聚合笺发光材料

描述了聚合物的发光源理及发光器件构造，详细地介绍了聚合物发光二极管的发展历史了新动态， 重于颜色的调谐，发光效率的提高等方面。     

用于电致发光器件的蓝光聚合物材料研究进展

聚合物电致发光材料成型加工简便、可大面积生产,可应用于大面积平板显示及固体照明器件。与红、绿光聚合物发光材料相比,蓝光聚合物电致发光材料在发光性能、材料寿命等方面仍然存在较大差距,这成为全色显示的瓶颈。通过在聚合物主链上引入大体积的取代基或侧链、形成具有三维空间共轭效应的支化结构或能量可转移的主客体结构等,来改善溶解性和光物理性能等,从而得到发光效率高、色纯度好、热力学性能优异且材料加工性能良好的蓝光聚合物电致发光材料。本文从材料设计的角度简要介绍了国内外蓝光聚合物发光材料的主要研究进展。     

荧光超分子聚合物研究进展

超分子聚合物是单体通过非共价键有序组装形成的一种新型聚合物。非共价相互作用赋予了超分子聚合物动态可逆性、刺激响应性及自适性。荧光超分子聚合物是将荧光团引入到超分子聚合物中,从而赋予超分子聚合物特殊的光学性能。因此,荧光超分子聚合物固有的发光性质及动态可逆性使得超分子聚合物被广泛应用于荧光传感器、探针、显影剂及发光二极管等领域。本文根据发光颜色不同的荧光超分子聚合物的设计及应用进行分类,并对荧光超分子聚合物的未来发展进行展望。     

聚集诱导发光基团修饰的功能化树枝形聚合物及其光物理性质研究

构筑和发展新型光功能树枝形聚合物是当前研究热点之一. 聚集诱导发光(Aggregation Induced Emission. AIE)类化合物以其高固态发光量子产率和广阔的应用前景引起研究者的极大关注, 分子内旋转受限降低了非辐射失活被认为是AIE高固态发光量子产率的主要原因. 在树枝形聚合物的外围修饰聚集诱导发光基团, 改善树枝形聚合物的发光性能, 通过外界环境改变树枝形聚合物分子构象, 实现对功能化树枝形聚合物体系发光的调控, 对扩展光功能树枝形聚合物在发光材料以及光捕获体系中的应用有重要意义.     

聚集诱导发光材料在聚合物制备及性能检测中的应用进展

聚集诱导发光(AIE)材料因其独特的发光性能,已在荧光检测、生物成像及有机发光器件等领域展现出较为广阔的应用前景。本文综述了AIE材料在监测聚合物制备过程(本体聚合、溶液聚合、乳液聚合及悬浮聚合过程等)中的应用,介绍了利用AIE分子的荧光信号响应检测聚合物玻璃化转变温度、粘度、相分离程度、分子量等物理性能的研究,为AIE材料在聚合过程可视化监测及聚合物荧光功能化领域的应用提供了参考。最后对AIE材料在高分子科学研究中的应用前景进行了展望。     

聚合物磷光材料的研究进展北大核心CSCD

金属配合物磷光材料因为其能同时利用单线态激子和三线态激子,引起了人们广泛关注。聚合物磷光材料(polymer phosphorescent materials,PPMs)同时具备小分子金属配合物的良好发光特性和高分子的优异物理性能,如容易挠曲、可溶液加工和良好的成膜性。本文综述了近年来聚合物磷光材料的研究进展,总结了聚合物磷光材料的合成方法及其在有机电致发光器件(OLED)方面的应用。最后从电磷光发光聚合物的分子结构设计出发,在电磷光发光聚合物领域业已取得进展的基础上,分析了电磷光发光聚合物在电致发光领域应用中存在的一些问题,并展望了电磷光聚合物今后的发展方向。     

主链为咔唑-吖啶给体/侧基为三联吡啶受体的热诱导延迟荧光共轭聚合物合成及发光性质

成膜性能优异的聚合物发光材料适宜于可溶液加工大尺寸显示及照明器件制作,赋予其热诱导延迟荧光(TADF)特征能够有效改善器件发光性能.本工作以苯环对位桥连三联吡啶的吖啶衍生物(ABTPy)为TADF单体、咔唑(Cz)衍生物为共聚单体,利用交叉偶联反应,控制TADF单体摩尔投料比为1%、5%、10%和50%,合成了4个主链为咔唑-吖啶给体/侧基为三联吡啶受体的共轭聚合物PCzABTPy1～PCzABTPy50.低含量TADF单元聚合物溶液的光致发光光谱显示了低聚咔唑片段和TADF单元的双峰发射,发光峰位是420和488 nm,聚合物薄膜仅出现单峰发射,发光峰由470 nm红移至508 nm.聚合物瞬态荧光衰减光谱均包含纳秒级瞬时荧光(12～15 ns)和微秒级延迟荧光(1.3～4.8μs),证实聚合物具有TADF特性.以聚合物为发光层的非掺杂溶液加工电致发光器件实现了蓝光发射,发光波长位于452～484 nm.其中,PCzABTPy10发光器件展示了最优的发光性能,最大外量子效率(EQE)为9.4%,启亮电压为3.0 eV.在亮度1000 cd/m²时,器件EQE仍保...     

N,O-羧甲基壳聚糖的合成和性质研究

采用多段升温法将壳聚糖改性,合成了取代度为1.84、平均分子量为3.08×105、等电点为7.28的N,O-羧甲基壳聚糖(CMC),分别用紫外光谱、红外光谱、荧光光谱对其结构进行了表征,并对其水溶液的Zeta电位、电导率、表面张力以及水分散体系中羧甲基壳聚糖微粒的粒径分布进行了研究.结果表明, N,O-羧甲基壳聚糖具有表面活性;介质的pH值和浓度对羧甲基壳聚糖溶液的稳定性有很大的影响.     

水性聚氨酯的制备及其性能的研究

本文以琥珀酸酐与三羟甲基丙烷反应,制得了含有羟基和羧基的酯类亲水性单体,并以此单体与ＴＤＩ和ＰＰＧ－１０００反应,制得了含有羧基的聚氨酯预聚体,在三乙醇胺水溶液中分散得到了水性聚氨酯（简称ＷＰＵ）。本文对预聚体的溶剂种类和用量,对乳胶粒的大小及形状的影响进行了研究,确认溶剂的用量越大,乳胶的粒径就越小;以丙酮作溶剂,乳胶粒为棒状或橄榄球状,而以丁酮为溶剂,得到的乳胶粒为圆球状。通过改变亲水单体的用     

钾盐矿床中含石膏盐分析方法的研究

由于现行标准《岩石矿物分析规程》(DZG93-08)对含石膏钾盐样品分析方法的叙述较为粗略,同时没有国家一级有证标准物质进行质量监控,因此在测定含石膏钾盐样品时较为困难。本文讨论了溶矿温度、称样量、以及放置时间对含石膏钾盐样品溶解的影响。得出在称样量为0.5000g,水温80℃,放置时间为24小时,用电感耦合等离子体发射光谱法测定,以样品中各组分百分数加和、溶液中元素阴阳离子平衡以及加标回收实验进行数据质量监控。测试数据符合《地质矿产实验室测试质量管理规范》对钾盐样品分析质量的要求。     

Staircase voltammetry with finite diffusion space

A theory of the staircase voltammetry in a thin-layer cell is developed. The influence of the cell thickness and the redox reaction rate constant on the current and the peak potentials is analyzed. For moderately thick cells, the kinetic maximum is predicted. The relationship between peak currents and the square root of the scan rate is not linear and the response may entirely vanish if the redox reaction is fast, the cell is very thin and the scan rate is slow.     

Wastewater treatment using nanomaterial quaternary photocatalyst ZrCdPbO4 - Removal of colour pollutant by an eco friendly process

Pollution of environment is a major issue and has drawn attention of researchers throughout the globe. Water is polluted by various means like excretion of various industries and house releases, for example release of yarn, paper, and cloth industries etc. Present investigation consists of removal of such a pollutant. For this, synthesis of a novel quaternary nano particle sized photocatalyst ZrCdPbO₄ is carried and its characterization by different analytical techniques is also carried out. This is further used for removal of colour pollutants from the environment and Erythrosine-B is considered as a role model. Effect of various operational parameters like pH, concentration of dye, amount of photocatalyst, irradiation power etc. is studied, maximum degradation condition is extracted, and it is observed that reaction follows pseudo first order kinetics. Scavenger study suggests the participation of OH free radical in the reaction. Complete degradation of the dye in presence of light and photocatalyst is reported here by. Reusability of the photocatalyst is tested and is found to work up to five cycles efficiently.     

On-line water removal during enzymatic triacylglycerol synthesis by means of pervaporation

Triacylglycerols can be synthesized from glycerol and fatty acids. During this equilibrium reaction water is produced, therefore a mixture of mono-, di- and triesters is obtained. One way to produce an excess of triacylglycerols is to remove the water produced during synthesis. This can be realized in an immobilized enzyme pervaporation system. The enzyme is immobilized onto the lumen side of a cellulose membrane where the organic phase is present. Air circulates at the shell side and the water activity is controlled with the use of a condenser. The lipase catalyzed esterification of decanoic acid and partial glycerides is studied in this reactor. The system is reaction limited. Only at low water activity conditions, an excess of triacylglycerols is obtained. The enzyme activity at the start of the experiments is independent of the water activity within the range studied. Stability is influenced: After 600 hours the activity is 26% of the activity at the start at a_w = 0.1 and 71% at a_w = 0.45.     

神华煤直接液化残渣热解特性研究

通过热重分析技术考察了神华煤直接液化残渣的热解特性。结果表明,和煤热解相比,在相同条件下残渣热解具有更大的失重率和失重速率。残渣热失重分为三个阶段,在173℃以前为残渣热解第一阶段;从173℃～510℃是残渣热解第二阶段,此阶段为残渣的主要失重阶段;510℃以后是残渣热解的第三阶段,在这个阶段残渣继续失重,此阶段的失重是由于残渣的二次分解和残渣中的矿物质分解造成的。通过比较脱油前后残渣热失重曲线发现,残渣主要失重是由于残渣中重质油、沥青烯以及前沥青烯的热解以及挥发造成的。通过脱灰残渣的热解发现,与原残渣相比,脱灰后残渣的失重量变小,矿物质的分解和残渣中有机组分的缩聚是温度高于649℃以后残渣失重的主要原因。由热解特征参数看出,脱油残渣的初始热解温度、最大失重温度以及剧烈热解终温均高于原煤,说明和原煤相比,脱油后残渣中惰性组分不易热解。与原煤和四氢呋喃脱油渣相比,残渣具有最大的失重速率,这是由于残渣中含有大量重质油、沥青烯以及前沥青烯造成的。     

Effect of cationic monomer on properties of fluorinated acrylate latex

Cationic fluorinated acrylate latex was prepared via semi-continuous emulsion copolymerization of cationic monomer and other monomers.The resultant latex and its film were characterized with dynamic light scattering detector and contact anglc meter. Influences of amount of DMDAAC on the propcrtics of resultant latex and its film were investigated in detail.Results show that the particle size of the latex has the minimum value and the zeta potential of the latex is increased when the amount of DMDAAC is increased.In addition,the particle size of the latex is unimodal distribution when the amount of DMDAAC is not more than 2.5%. However,the particle size of the latex is bimodal distribution when the amount of DMDAAC is more than 2.5%.The contact angle is varied slightly with the increase of amount of DMDAAC when it is not more than 2.5%.Nevertheless,the contact angle is decreased with the increase of the amount of DMDAAC when it is more than 2.5%.     

流动注射分光光度法测定矿物浸提液中的游离氰化物

在氢氧化钠介质中游离的氰化物与苦味酸钠反应生成玫瑰红酸钠，并进行升温改善反应条件。双流路系统与单流路相比，峰形规范、光滑，能有效消除鬼峰，优化了显色条件，工作波长为５１０ｎｍ。按生产工艺要求的线性范围为４．０￣４０．０ｍｍｏｌ／Ｌ。进样频率为１３０次／ｈ。已成功地用于矿物浸提液中游离氰化物的现场分析。     

Interaction of graphene with antipsychotic drugs: Is there any charge transfer process?

Antipsychotics represent an effective therapy for schizophrenia (a chronic mental disorder). Their benefits are related to the interaction of the drugs with dopamine D2 receptor (D2R). Antipsychotics are classified as agonists or antagonists. One of the working hypotheses is that there is a charge transfer process between the drugs and the receptors, which is different for agonists and antagonists. To have more insight into the nature of the interaction of these molecules and the differences between agonists and antagonists, we analyze the interaction of graphene with three molecules: dopamine, pramipexole (an agonist of dopamine), and risperidone (an antagonist of dopamine). The idea is to use graphene as a simple model to analyze the charge transfer process of these three drugs. Optimized structures, atomic charges, and Density of States results indicate that global charges of dopamine and pramipexole are similar, while for risperidone, it is more than double. Pramipexole is an agonist, and the charge transfer process is similar to that of dopamine. Risperidone is an antagonist, and the charge transfer process is different from dopamine. The charge transfer is more significant with risperidone than with dopamine, and this could be related to the mechanism of action. This is in agreement with the working hypotheses that establish that it is possible to distinguish between agonists and antagonists since they have different capacity to transfer charge.