顶空-气相色谱-质谱联用分析桂花和叶中挥发性成分

采用谱库检索结合准确质量测定、保留指数、串联质谱技术的多维定性分析策略鉴定化合物, 能够提高定性分析的效率和准确性. 运用顶空-气相色谱-四极质谱、顶空-气相色谱-飞行时间质谱以及顶空-气相色谱-串联质谱联用技术对桂花样品进行了分析检测, 并采用多维定性分析思路对检出的挥发性成分进行了鉴定. 结果共确认出47种挥发性成分, 其中单萜类和倍半萜类化合物为主要组分. 该定性分析策略准确可靠, 可以广泛应用于复杂样品挥发性成分的定性分析中.     

顶空-气相色谱法测定B-100生物柴油中游离甲醇含量

建立了顶空-气相色谱测定B-100生物柴油中游离甲醇含量的方法.B-100生物柴油样品使用N,N-二甲基乙酰胺溶解,90℃下顶空平衡45 min,在HP-INNOWAX色谱柱上进行分离和测定.方法建立了外标法定量的标准曲线,相关系数r大于0.999,样品中甲醇质量分数的检出限为0.005%.对实际样品进行检测,相对标准偏差为4.96%~6.83%(n=6),加标回收率为92.0%~110%.方法操作简单、快速、重复性好,适用于B-100生物柴油中游离甲醇含量的测定.     

自动顶空-气相色谱-质谱法测定血液中乙醇含量

提出了自动顶空-气相色谱-质谱联用检测血液中乙醇含量的方法。取一定量的血样或乙醇标准样品置于顶空瓶中(其中各加固定量的叔丁醇作为内标),在60℃及中速振摇的条件下平衡20 min,通过进样环定量地将一定量样品引入于气相色谱-质谱联用仪器中进行测定。乙醇和叔丁醇的保留时间分别为1.47 min和1.56 min。方法的线性范围为0.01~10.00 g.L-1,检出限(3S/N)为0.6 mg.L-1,测定下限(10S/N)为1.0 mg.L-1。乙醇的回收率在92%~105%之间,测定值的相对标准偏差(n=6)小于7%。     

顶空-气相色谱-质谱法测定皂、粉、液类洗涤用品中的二噁烷

提出了测定皂、粉、液类洗涤用品中二噁烷含量的顶空-气相色谱-质谱法。以5mL水为顶空溶剂,将样品在80℃顶空平衡50min后,经HP-5MS色谱柱分离,质谱检测器检测,外标法定量。3种基质中二噁烷的线性范围为0.1~50.0mg·kg-1,测定下限均在0.2mg·kg-1以下。以空白样品为基体进行加标回收实验,测得平均回收率在85.2%~97.8%之间,测定值的相对标准偏差(n=6)在2.6%~6.1%之间。     

同位素稀释-顶空气相色谱-质谱联用法测定化妆品中的二噁烷残留量

建立了化妆品中二噁烷的同位素稀释-顶空气相色谱-质谱联用测定方法。称取2 g化妆品样品于顶空样品瓶中,加入1 g氯化钠及20 mg/L氘代二噁烷内标溶液1 mL,再加入9 mL水。密封后摇匀,置于顶空进样器中,在70℃平衡40 min。气液平衡后的上部气体经HP-5 MS石英毛细管气相色谱柱(30 m×0.25 mm×0.25μm)分离后,采用选择离子扫描模式进行质谱定性及定量分析。二噁烷的方法定量限为2.5 mg/kg;在2.5~50 mg/kg的3个添加水平范围内的平均回收率为90.5%~104.0%,相对标准偏差为1.26%~3.98%。本方法准确、简便、快速,能够满足化妆品样品中二噁烷残留量的检测要求。     

气相色谱-三重四极杆串联质谱法检测环境空气中的多环芳烃

建立了气相色谱-三重四极杆串联质谱检测环境空气中多环芳烃的方法,并利用同位素稀释法对多环芳烃进行了测定。将该方法应用于华南地区某大型石化企业周边环境空气中多环芳烃的检测,并与气相色谱-质谱方法进行了对比。结果表明,该方法的仪器检出限（0.01~0.15 μg/L）和定量限（0.03~1.5 μg/L）均优于气相色谱-质谱法（0.1~0.8 μg/L和0.3~3.5 μg/L）,并有更好的灵敏度与选择性。当利用气相色谱-质谱作为检测手段时,回收率指示物氘代菲和进样内标六甲基苯均受到了杂质的严重干扰,影响了定量结果的准确性,而三重四极杆串联质谱很好地解决了这些问题。实际样品分析时,标准曲线中16种多环芳烃相对响应因子的相对标准偏差为2.60%~15.6%,氘代化合物的回收率为55.2%~82.3%,空白加标样品的回收率为98.9%~111%,平行样品的相对标准偏差为6.50%~18.4%,采样空白含量范围为未检出~44.3 pg/m³,实验室空白含量范围为未检出~36.5 pg/m³。上述研究表明,分析环境空气中的多环芳烃时,气相色谱-三重四极杆串联质谱方法值得推广。     

顶空-气相色谱法测定乙烯-乙酸乙烯酯共聚物塑料儿童用品中甲酰胺含量

应用顶空-气相色谱法测定了儿童用品乙烯-乙酸乙烯酯共聚物塑料中甲酰胺的含量。选择顶空平衡温度和时间分别为160℃和40min,用DB-Wax色谱柱(0.53mm×30m,1μm)分离,氢火焰离子化检测器检测。以N,N-二甲基甲酰胺为内标物。甲酰胺的线性范围为1~646μg。方法用于此类共聚物塑料地垫样品的分析,加标回收率在80.9%~82.8%之间,测定值的相对标准偏差(n=6)在4.1%~4.5%之间。     

顶空-气相色谱-质谱法同时测定土壤中6种有机胺的含量北大核心CSCD

提出了顶空-气相色谱-质谱法测定土壤中甲胺、乙胺、二甲胺、二乙胺、三甲胺、三乙胺等6种有机胺含量的方法。土壤样品在顶空瓶中经盐酸溶液提取,加入一定量的氢氧化钠溶液、氨水,然后在顶空进样器中于80℃平衡30 min,使气液两相达到动态平衡。采用CP-Volamine色谱柱对目标物进行分离,质谱仪检测,外标法定量。结果显示:6种有机胺的质量浓度在一定范围内与其对应峰面积呈线性关系,检出限(3.143s)为0.00033~0.18 mg·kg^(-1);混合标准溶液中6种有机胺测定值的相对标准偏差(n=6)为2.3%~4.7%;对空白样品进行3个浓度水平的加标回收试验,回收率为80.0%~108%;方法用于5种不同类型实际土壤样品分析,两种土壤样品中检出三乙胺,检出量为11.3,391 mg·kg^(-1)。     

顶空-气相色谱-质谱法测定水中25种挥发性有机物的含量

采用顶空-气相色谱-质谱法测定水中25种挥发性有机物的含量。水样经80℃、30min静态顶空提取后,在气相色谱分离中用HP-VOC色谱柱为固定相。在质谱分析中采用全扫描和选择离子监测模式。25种挥发性有机物在一定的质量浓度范围内与其峰面积呈线性关系,方法的检出限在0.13~2.06μg·L-1之间。以空白样品为基体进行加标回收试验,所得回收率在75.1%~109%之间,测定值的相对标准偏差(n=6)在2.2%~9.8%之间。     

顶空固相微萃取-气相色谱-质谱联用分析麦冬中有机挥发物

采用顶空固相微萃取-气相色谱-质谱联用(HS-SPME-GC-MS)分析麦冬中挥发性成分,对萃取温度、时间、脱附时间及样品用量等条件进行了优化,方法所得结果与同时蒸馏萃取-气相色谱-质谱联用(SDE-GC-MS)方法比较,相对含量较高的成分基本一致.固相微萃取方法可应用于麦冬中有机挥发性成分的快速分析.     

Vapor pressures and flash points for binary mixtures of tricyclo [5.2.1.0] decane and dimethyl carbonate

Bubble-point vapor pressures, equilibrium temperatures and flash points for binary mixtures of a high energy density hydrocarbon fuel, tricyclo [5.2.1.0^2.6] decane (JP-10), and dimethyl carbonate (DMC) were measured. Correlation between vapor pressures and equilibrium temperatures for each mixture was given by the Antoine equation. The binary system of JP-10 and DMC appears with very large positive deviations of vapor pressure from the Raoult's law. The experimental vapor pressures are correlated and the flash points are then predicted using Scatchard-Hildeband, Van Laar and Wilson models of liquid phase activity coefficients with satisfactory results.     

一种简易同时蒸馏萃取方法用于八角茴香挥发油提取及其GC-MS分析

设计了一种简易同时蒸馏萃取(SSDE)装置并用于八角茴香挥发油提取及其气相色谱-质谱法(GC-MS)分析。 该装置由圆底烧瓶、恒压滴液漏斗和回流冷凝管构成。 通过对八角茴香挥发油组分的GC-MS分析,比较SSDE法和水蒸汽蒸馏提取法(HD)提取植物源挥发油的效果。 结果表明,SSDE法所得挥发油相对含量在0.1%以上的19种化合物占挥发油总量的98.84%(相对标准偏差(RSD)(n=3)均不大于5.59%,其中RSD﹤5%的17种化合物占鉴定组分89.5%。SSDE法和HD法挥发油平均收率分别为7.30%(RSD=2.37%(n=5))和6.67%(RSD=5.26%(n=5))。 SSDE法简便、快速,适用于八角茴香挥发油的提取。     

Utilization of flash chromatography for the fractionation of coal derived liquids

Summary The suitability of flash chromatography for the fractionation of coal liquids in compound classes has been studied. TLC data obtained from standards were used for establishing the sequence, composition and volume of eluents in order to collect the main components of coal liquids in six fractions of increasing polarity. The method was tested by the fractionation of a SCG coal extract and separations were evaluated by TLC, SEC, and IR and NMR spectroscopy.     

Determination of Henry''s law coefficients by combination of the equilibrium partitioning in closed systems and solid-phase microextraction techniques

This paper describes the determination of Henry's law coefficients by means of the EPICS (equilibrium partitioning in closed systems) technique in combination with SPME (solid-phase microextraction). The use of solid-phase microextraction-sampling allowed us to extend the possibilities of the equilibrium partitioning in closed systems technique with respect to the range of Henry's law coefficients which can be measured. Whereas the equilibrium partitioning in closed systems technique is limited to determine air–water equilibrium partitioning of volatile compounds with Henry's law coefficients of at least 0.06 (dimensionless), the current method allowed to measure coefficients between 0.0023 and 13.5. In this way Henry's law coefficients of 20 compounds, being in a range covering five orders of magnitude, were measured with relative standard deviations between 1.0 and 19.8% (mean standard deviation: 5.7%; median of standard deviations: 4.8%, n=99). Several types of compounds were examined i.e. aliphatic hydrocarbons, monocyclic and polycyclic aromatic hydrocarbons, chlorinated and fluorinated compounds, ethers and esters, biphenyl and N-containing compounds, including compounds for which availability of experimental Henry's law coefficients is limited. Measurement of the equilibrium partitioning in the 2 to 25°C range allowed to establish relations of Henry's law coefficient as a function of temperature.     

减压提取与常压提取柴胡挥发油品质比较

对比减压和常压条件下提取的柴胡挥发油在成分、含量及药效方面的差异,考察挥发油的品质,优选提取方法。采用气相色谱-质谱联用(GC-MS)法分析柴胡挥发油成分及其相对含量,再采用气相色谱法建立挥发油中己醛、庚醛、正辛醛和反式-2,4-癸二烯醛的含量检测方法,测定不同压力下提取的柴胡挥发油有效成分含量,通过背部皮下注射酵母混悬液复制大鼠发热模型,将常压、减压提取的柴胡挥发油溶于1%吐温80后腹腔注射给药,测定大鼠不同时间点的体温变化情况,利用单因素方差分析(Single factor analysis of variance)进行组间比较。结果显示:减压提取与常压提取的挥发油成分和含量存在差异,己醛、庚醛、正辛醛和反式-2,4-癸二烯醛在减压提取方法中的提取率更高,同时该方法提取的挥发油对干酵母引起的发热药效更显著。由此可见,减压提取能有效减少热敏性成分被破坏,提高有效成分的提取效率,提取的柴胡挥发油具有更显著的药效,品质优于常压提取。     

黄芩-栀子配伍治疗糖尿病肾病大鼠的尿液代谢组学研究

采用基于超高效液相色谱与串联四极杆飞行时间质谱仪(Ultra-high performance liquid chromatography coupled with quadrupole time-of-flight mass spectrometry,UHPLC-Q-TOF MS)联用的代谢组学方法,通过分析大鼠尿液内源性代谢物的变化,研究黄芩-栀子药对治疗糖尿病肾病的作用机制。利用高脂高糖饲料喂养并腹腔注射链脲佐菌素(STZ)建立糖尿病大鼠模型。给药12周后,采用UHPLC-Q-TOF MS对正常对照组、模型组、黄芩-栀子药对治疗组的尿液样品进行代谢轮廓分析。利用正交偏最小二乘判别分析(Orthogonal partial least squares discriminant analysis,OPLS-DA)对实验数据进行分析,挑选出对各组分分离贡献较大(VIP>1,p<0.05)的化合物在Human Metabolome Database(HMDB)等数据库进行质谱信息匹配,共鉴定出糖尿病肾病潜在生物标记物31个,给药后回调生物标记物16个。研究结果表明,黄芩-栀子药对通过影响胆汁酸的合成与代谢、尿毒素代谢、能量代谢、色氨酸代谢、苯丙氨酸代谢、酪氨酸代谢等通路对糖尿病肾病起到治疗作用,其中胆汁酸的合成与代谢、尿毒素代谢和能量代谢可能是黄芩-栀子药对发挥治疗作用的主要途径。与单味药相比,配伍后的药对具有了新的药理作用。     

Computer-aided product design of alternative solvents based on phase equilibrium synergism in mixtures

A systematic methodology is proposed to find binary azeotropic mixtures as new alternative solvents for the extraction process of volatile aroma molecules widely used in perfume and cosmetic industries. We investigated the use of the reverse engineering approach with computer-aided product design (CAPD) instead of the traditional “trial and error” approach. First, the design problem is defined from the real functionalities of the classical solvents. The latter are translated into physicochemical properties and the corresponding boundary values for each property are defined. The reverse engineering method coupled with CAPD consists in using optimization techniques for building molecular structures that match as best as possible the complete set of target physicochemical properties, thus defining for each candidate a performance index. Property values are evaluated by using group contribution methods for each molecular structure generated by a CAPD tool or by using database values. Acknowledging the contradictory relationship between two selected physicochemical properties, that is, low boiling temperature and high flash point, which is rarely found in pure components, binary azeotropic mixtures were studied to enhance the global performance of solvent candidates. Dimethyl carbonate used as a solvent for the extraction of aroma molecules from plants exhibits between the boiling temperature and the flash point. It was selected as the key component for designing binary azeotropic mixtures. The global performance of the binary azeotropic mixtures was verified by means of calculations of the vapor–liquid and liquid–liquid equilibrium using modified universal functional activity coefficient (UNIFAC) method as a thermodynamic method.     

Flash gas chromatography for analysis of volatile compounds from Houttuynia cordata Thunb

This paper describes a novel analytical method, flash gas chromatography (FGC), for the analysis of volatile compounds from Houttuynia cordata Thunb. This method does not demand time-consuming extraction process. The ground powder of the plant material can be directly applied for the analysis and only a few milligrams of sample are needed. The identification of the components was made by FGC-MS. The results between FGC and ordinary GC (using the extracted essential oil as sample) were compared and found that FGC offered a similar number and types of the components with GC. FGC is a novel and feasible method for the quality control of traditional Chinese medicines (TCMs).     

Determination of heat of mixing and heat of vaporization with a differential scanning calorimeter

A simple method is presented for measuring the heat of mixing and the heat of vaporization of volatile liquids at temperatures below their boiling point. It consists in introducing liquids by a microsyringe into a nearly closed cell of the DSC. The relative standard deviation for 4 to 5 runs is ca. 5% for heat of mixing and ca. 2% for heat of vaporization.