Degradation behaviors of monomethoxy poly(ethylene glycol)‐b‐poly(ε‐caprolactone) nanoparticles in aqueous solution

Monomethoxy poly(ethylene glycol)‐b‐poly(ε‐caprolactone)(MPEG‐b‐PCL) diblock copolymers were synthesized via a ring‐opening polymerization. The polymeric nanoparticles prepared by precipitation/solvent evaporation exhibit a core–shell structure, characterized by dynamic light scattering (DLS), nuclear magnetic resonance (NMR), and atomic force microscopy (AFM). The hydrolytic degradation of those nanoparticles was studied by DLS, NMR, and gel permeation chromatography (GPC). It was found that the molecular weight of PCL block in a copolymer significantly affects the stability of nanoparticles in aqueous solution and nanoparticles with shorter PCL block length degraded faster. The degradation behaviors could be divided into two stages with slow degradation at the interface region via swelling effect and fast degradation at inner core via caves and channels formed by cleavage of ester bonds. Copyright © 2007 John Wiley & Sons, Ltd.     

Micellar structures of poly(styrene-b-4-vinylpyridine)s in THF/toluene mixtures and their functionalization with gold

The effects of the block copolymer composition and the solvent selectivity on the micellar morphologies of poly(styrene- b-4-vinylpyridine)s (PS- b-P4VPs) and their functionalizations with gold were studied in 10 mg/mL solutions using small-angle X-ray scattering and transmission electron microscopy (TEM). The solvent selectivity for the PS block was controlled by toluene/tetrahydrofuran (THF) mixtures in which toluene and THF are selective for PS and nonselective, respectively. The micellar structure was strongly dependent on phi (wt % toluene in toluene/THF mixture) and the composition of the block copolymers. PS(12K)- b-P4VP(11.8K) (symmetric) showed spherical micelles in the entire range of phi except phi = 0 (THF, nonselective solvent). PS(3.3K)- b-P4VP(18.7K) (asymmetric, longer P4VP) showed multiple morphologies with transitions from spheres to cylinders and finally to vesicles with an increase in phi. PS(19.6K)- b-P4VP(5.1K) (asymmetric, longer PS) showed spherical micelles only at the narrow ranges of 90 wt % 相似文献   

Influence of Mixed Common Solvent on the Co-assembled Morphology of PS-b-PEO and CdS Quantum Dots

The hybrid structures of polystyrene-b-poly(ethylene oxide)(PS-b-PEO) block copolymer and inorganic nanoparticles with good stability and biocompatibility have potential applications in drug delivery and bioimaging. Spherical co-assemblies of PS120-b-PEO318 and oleylamine-capped Cd S quantum dots(QDs) are produced successfully in this work by adding water to a mixed common solvent, such as N,N-dimethylmethanamide(DMF)/chloroform, DMF/tetrahydrofuran(THF), or DMF/toluene. The energy dispersive X-ray(EDX) spectrum indicates that QDs are located at the interface between the core and shell of the spherical co-assemblies. The co-assembly process during water addition is traced by transmission electron microscopy(TEM) and turbidity measurement. Spherical co-assemblies are formed through budding from bilayers of the block copolymer and QDs. The morphology of the co-assemblies is related to the miscibility of the QD-dispersing solvents with water and the morphology changes from a spherical to a vesicle-like structure with DMF/toluene. Increasing THF content in the mixed solvent causes morphological transitions from spherical co-assemblies to multi-branched cylinders and micelles where QDs are located in the central core. Increasing chloroform content yields vesicle-like structures with protruding rods on the surface. The mechanism of the morphological transitions is also discussed in detail.     

Monolayer-protected gold nanoparticles by the self-assembly of micellar poly(ethylene oxide)-b-poly(epsilon-caprolactone) block copolymer

A study is presented of the preparation of gold nanoparticles incorporated into biodegradable micelles. Poly(ethylene oxide)-b-poly(epsilon-caprolactone) (PEO-b-PCL) copolymer was synthesized by ring-opening polymerization, and the hydroxyl end group of the PCL block was modified with thioctic acid using dicyclohexyl carbodiimide as the coupling reagent. The PEO-b-PCL-thioctate ester (TE) thus obtained was used in a later step to form monolayer protected gold nanoparticles via the thioctate spacer. Gold nanoparticles stabilized with the PEO-b-PCL block (named Au/Block (x/y), where x/y is the mole feed ratio between HAuCl4 and PEO-b-PCL-TE) were prepared and analyzed. Au/Block (1/1), Au/Block (2/1), and Au/Block (3/1) nanoparticles were found to form stable dispersions in the organic solvents commonly used to dissolve the unlabeled block copolymer. The average diameter of the nanoparticles was determined by transmission electron microscopy (TEM) and found to be 6+/-2 nm. Au/Block (4/1) nanoparticle dispersions in organic solvents, on the other hand, were not stable and produced large gold clusters (50-100 nm). Cluster formation was attributed to the low grafting density of the block copolymer, which facilitates agglomeration. For Au/Block (12/1), along the same trend, only an insoluble product was isolated. Micelles in water were prepared by the slow addition of the dilute Au/Block solution in dimethylformamide into a large excess of water with vigorous stirring. Au/Block (1/1) and Au/Block (2/1) formed nanosized structures of 5-7 nm. TEM images of stained Au/Block (1/1) micelles, made in water, clearly showed the formation of core-shell structures. Au/Block (3/1) micelles, on the other hand, were not stable and large agglomerates a few microns in size were observed. The study focuses on the synthesis, characterization, and aggregation behavior of gold-loaded PEO-b-PCL block copolymer micelles, a potential system for drug delivery in conjunction with tissue and subcellular localization studies.     

Self-assembly of poly(ethylene oxide)-b-poly(epsilon-caprolactone) copolymers in aqueous solution

The associative behavior of monodisperse diblock copolymers consisting of a hydrophilic poly(ethylene oxide) block and a hydrophobic poly(epsilon-caprolactone) or poly(gamma-methyl-epsilon-caprolactone) block has been studied in aqueous solution. Copolymers have been directly dissolved in water. The solution properties have been studied by surface tension, in relation to mesoscopic analyses by NMR (self-diffusion coefficients), transmission electron microscopy, and small-angle neutron and X-ray scattering. The experimental results suggest that micellization occurs at low concentration (approximately 0.002 wt %) and results in a mixture of unimers and spherical micelles that exchange slowly. The radius of the micelles has been measured (ca. 11 nm), and the micellar substructure has been extracted from the fitting of the SANS data with two analytical models. The core radius and the aggregation number change with the hydrophobic block length according to scaling laws as reported in the scientific literature. The poly(ethylene oxide) blocks are in a moderately extended conformation in the corona, which corresponds to about 25% of the completely extended chain. No significant modification is observed when poly(gamma-methyl-epsilon-caprolactone) replaces poly(epsilon-caprolactone) in the diblocks.     

Molar mass dependent growth of poly(epsilon-caprolactone) crystals in Langmuir films

Poly(epsilon-caprolactone) (PCL) samples with number average molar masses (Mn) ranging from 3.5 to 36 kg.mol-1 exhibit molar mass dependent nucleation and growth of crystals, crystal morphologies, and melting properties at a temperature of 22.5 degrees C in Langmuir films at the air/water (A/W) interface. At surface area per monomer, A, greater than approximately 0.37 nm2.monomer-1, surface pressure, Pi, and surface elasticity exhibit molar mass independent behavior that is consistent with a semidilute PCL monolayer. In this regime, the scaling exponent indicates that the A/W interface is a good solvent for the liquid-expanded PCL monolayers. Pi-A isotherms show molar mass dependent behavior in the vicinity of the collapse transition, i.e., the supersaturated monolayer state, corresponding to the onset of the nucleation of crystals. Molar mass dependent morphological features for PCL crystals and their subsequent crystal melting are studied by in situ Brewster angle microscopy during hysteresis experiments. The competition between lower segmental mobility and a greater degree of undercooling with increasing molar mass produces a maximum average growth rate at intermediate molar mass. This behavior is analogous to spherulitic growth in bulk PCL melts. The plateau regions in the expansion isotherms represent the melting process, where the polymer chains continuously return to the monolayer state. The magnitude of Pi for the plateau during expansion decreases with increasing molar mass, indicating that the melting process is strongly molar mass dependent.     

Influence of mixed common solvent on the co-assembled morphology of PS-<Emphasis Type="Italic">b</Emphasis>-PEO and CdS quantum dots

The hybrid structures of polystyrene-b-poly(ethylene oxide) (PS-b-PEO) block copolymer and inorganic nanoparticles with good stability and biocompatibility have potential applications in drug delivery and bioimaging. Spherical co-assemblies of PS₁₂₀-b-PEO₃₁₈ and oleylamine-capped CdS quantum dots (QDs) are produced successfully in this work by adding water to a mixed common solvent, such as N,N-dimethylmethanamide (DMF)/chloroform, DMF/tetrahydrofuran (THF), or DMF/toluene. The energy dispersive X-ray (EDX) spectrum indicates that QDs are located at the interface between the core and shell of the spherical co-assemblies. The co-assembly process during water addition is traced by transmission electron microscopy (TEM) and turbidity measurement. Spherical co-assemblies are formed through budding from bilayers of the block copolymer and QDs. The morphology of the co-assemblies is related to the miscibility of the QD-dispersing solvents with water and the morphology changes from a spherical to a vesicle-like structure with DMF/toluene. Increasing THF content in the mixed solvent causes morphological transitions from spherical co-assemblies to multi-branched cylinders and micelles where QDs are located in the central core. Increasing chloroform content yields vesicle-like structures with protruding rods on the surface. The mechanism of the morphological transitions is also discussed in detail.     

Synthesis and self-assembly behaviors of well-defined poly(lauryl methacrylate)-block-poly[N-(2-methacryloylxyethyl)pyrrolidone] copolymers

A series of structurally controllable poly(lauryl methacrylate)-b-poly[N-(2-methacryloylxyethyl)pyrrolidone], PLMA-b-PNMP, diblock copolymers were synthesized by reversible addition–fragmentation chain transfer polymerization. The self-assembly behaviors of PLMA-b-PNMP in a selective solvent, tetrahydrofuran (THF), were studied by employing static light scattering, dynamic light scattering, and transmission electron microscopy in detail. The relationships between the aggregation parameters, such as critical micelle concentration and the aggregation number (N _agg), and the molecular structure were established. It was found that spherical micelles can be formed once the solvophobic block length of poly[N-(2-methacryloylxyethyl)pyrrolidone] is larger than 215. Moreover, extremely small and monodisperse gold nanoparticles (<2 nm) were synthesized by employing PLMA-b-PNMP diblock copolymers in THF.     

Disk morphology and disk-to-cylinder tunability of poly(acrylic acid)-b-poly(methyl acrylate)-b-polystyrene triblock copolymer solution-state assemblies

Disk and cylindrical micellar assemblies were formed through self-organization of poly(acrylic acid)-b-poly(methyl acrylate)-b-polystyrene (PAA-b-PMA-b-PS) amphiphilic triblock copolymers with organic diamines as counterions in water/ tetrahydrofuran (THF) solvent mixtures. The system was investigated by means of transmission electron microscopy and cryogenic transmission electron microscopy. It was found that the assembled-state morphologies could be modified by alteration of the type and concentration of cationic diamine counterion undergoing interaction with the negatively charged, polyelectrolyte PAA corona block, the relative amount of water in the water/THF mixture, and the hydrophobic block chain length. Multivalency of the organic amine counterion was critical for disk formation. It was further demonstrated that a single block copolymer underwent disc-to-cylindrical micellar transitions reversibly with variation in the relative water/THF ratio. The ability to form disks beginning from either THF-rich or water-rich solutions indicated that the disk morphology was thermodynamically stable and that THF was important in keeping the micellar structure from becoming kinetically frozen. The nanoassemblies were produced having low size dispersities and were stable for at least one month. Intermediate structures between disks and cylinders were also observed, indicating two distinct kinetic pathways between the two micelle structures.     

Clonazepam release from core-shell type nanoparticles composed of poly(γ-benzyl L-glutamate) as the hydrophobic part and poly(ethylene oxide) as the hydrophilic part

Block copolymers consisting of poly(γ-benzyl L -glutamate) (PBLG) as the hydrophobic part and poly(ethylene oxide) (PEO) as the hydrophilic part were synthesized and characterized. Core shell type nanoparticles of the block copolymers (abbreviated GEG) were prepared by the dialysis method. Under fluorescence spectroscopy measurement, the GEG block copolymers were associated in water to form core shell type nanoparticles as polymeric micelles and the critical micelle concentrations (CMC) values of the block copolymers decreased with increasing PBLG chain length in the block copolymers. Transmission electron microscopy (TEM) observations revealed nanoparticles of spherical shapes. From dynamic light scattering (DLS) study, sizes of nanoparticles of GEG-1 and GEG-2 copolymer were 64.3 ± 28.7 nm and 28.9 ± 7.0 nm. The drug-loading contents of GEG-1 and GEG-2 nanoparticles were 15.2 and 8.3 wt %, respectively. These results indicated that the drug-loading contents were dependent on PBLG chain length in the copolymer. Then, the longer the PBLG chain length, the more the drug-loading contents. Release of clonazepam (CNZ) from the nanoparticles was slower in higher loading contents of CNZ than lower loading contents due to the hydrophobic interaction between PBLG core and CNZ. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 415–423, 1998     

Polymerization of ethylene oxide with a calixarene‐based precursor: Synthesis of eight‐arm poly(ethylene oxide) stars by the core‐first methodology

Eight‐arm poly(ethylene oxide) (PEO) stars were prepared by the core‐first method with a newly designed octahydroxylated precursor. This compound was readily obtained in two steps from commercially available tert‐butylcalix[8]arene. The choice of the proper solvent of polymerization proved crucial to obtain PEO star materials with a narrow distribution of molar masses. For instance, the use of dimethyl sulfoxide (DMSO) resulted in PEO samples of rather large polydispersities (PDI: 1.3–1.5). In this solvent, the calixarene‐based precursor was only sparingly soluble, and an attempt to metalate its eight hydroxyl groups produced insoluble alkoxides. In addition, the presence of a side population of low‐molar‐mass species attributable to linear chains was detected because of the chain transfer of propagating alkoxides to DMSO. Polymerization experiments carried out in tetrahydrofuran (THF) as solvent afforded better control over the molar masses and PDIs. This was related to the better solubility of the octafunctional calixarene‐based precursor in THF and to the small tendency of the alkoxides formed to aggregate in that solvent. Under such conditions, all eight hydroxyl functions efficiently initiated the polymerization of ethylene oxide. In this way, well‐defined PEO stars (PDI < 1.2) of tunable molar masses incorporating a calixarene‐based core could be obtained, as it was supported by the characterization of the samples by size exclusion chromatography, NMR, and viscometry. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1669–1676, 2003     

Micellization phenomena of biodegradable amphiphilic triblock copolymers consisting of poly(beta-hydroxyalkanoic acid) and poly(ethylene oxide)

This paper reports the studies on micelle formation of new biodegradable amphiphilic poly(ethylene oxide)-poly[(R)-3-hydroxybutyrate]-poly(ethylene oxide) (PEO-PHB-PEO) triblock copolymer with various PHB and PEO block lengths in aqueous solution. Transmission electron microscopy showed that the micelles took an approximately spherical shape with the surrounding diffuse outer shell formed by hydrophilic PEO blocks. The size distribution of the micelles formed by one triblock copolymer was demonstrated by dynamic light scattering technique. The critical micellization phenomena of the copolymers were extensively studied using the pyrene fluorescence dye absorption technique, and the (0,0) band changes of pyrene excitation spectra were used as a probe for the studies. For the copolymers studied in this report, the critical micelle concentrations ranged from 1.3 x 10(-5) to 1.1 x 10(-3) g/mL. For the same PEO block length of 5000, the critical micelle concentrations decreased with an increase in PHB block length, and the change was more significant in the short PHB range. It was found that the micelle formation of the biodegradable amphiphilic triblock copolymers consisting of poly(beta-hydroxyalkanoic acid) and PEO was relatively temperature-insensitive, which is quite different from their counterparts consisting of poly(alpha-hydroxyalkanoic acid) and PEO.     

Biodegradable and biomimetic poly(epsilon-caprolactone)/poly(lactobionamidoethyl methacrylate) biohybrids: synthesis, lactose-installed nanoparticles and recognition properties

Biodegradable and biomimetic SPCL-PLAMA biohybrids were synthesized via ATRP and characterized by FT-IR, (1)H NMR, GPC and DSC. Biohybrids with small PDI were obtained, and the block length of the PLAMA glycopolymer could be varied linearly by the varying the molar ratio of glycomonomer to macroinitiator. The outer PLAMA glycopolymer restrained the crystallization of inner PCL segments. The self-assembly properties of amphiphilic biohybrids were studied. Lactose-installed aggregates were fabricated in aqueous solution; they changed from spherical micelles to vesicles with increasing weight fraction of hydrophobic PCL. The SPCL-PLAMA biohybrids showed specific recognition for RCA(120) lectin.     

The synthesis of P(MAn-co-St)-b-PS-b-P(MAn-co-St) block copolymers by RAFT polymerization and the nanostructure of their self-assembly aggregates

A series of block copolymers of styrene, maleic anhydride and acrylic acid were synthesized by the reverse addition–fragmentation chain transfer (RAFT) process. The structure, molecular weight and polydispersity index were determined by FTIR, ¹H NMR, SEC&MALLS and DSC analysis. The results showed that the polymerization occurred in a living and controlled manner. Multiple self-assembled nanostructures of these block copolymers were investigated by transmission electron microscopy (TEM). Tetrahydrofuran (THF), N,N-dimethylformamide (DMF) and 1,4-dioxane were used as the common solvents and twice-distilled water as the selective solvent to clarify the effects of the solvent. The results revealed that with the increase of the extension degree of the core, non-spherical aggregates were easily formed, the composition of the copolymers influences the aggregation behavior, and other factors also influence the self-assembly, such as hydrolysis, temperature, annealing time, molecular architecture etc. A mechanism is proposed to illustrate the formation of the various aggregates of P(MAn-co-St)-b-PS-b-P(MAn-co-St) copolymer, which were confirmed by TEM results.     

The preparation and characterization of the cross-linked spherical, cylindrical, and vesicular micelles of poly(styrene-b-isoprene) diblock copolymers

PI cores of the micelles of poly(styrene-b-isoprene) (PS-b-PI) diblock copolymers, in PS selective solvents, were cross-linked with sulfur monochloride (S2Cl2). The cross-linked micellar structure was maintained after dialysis in THF (neutral solvent) and did not change during heating. Cross-linking brought about the opportunity for TEM images in a solution state; otherwise, the micellar structure would be destroyed (or changed) during the evaporation of the solvent on a carbon-coated copper grid. The Flory interaction parameter, chi, between the PI block and the solvent was controlled by mixing two selective solvents (DMP/toluene, DMP/DEP and DEP/DBP) which have different degrees of selectivity for the PS block, as well as heating the solutions. Two block copolymers, PS(7.2K)-b-PI(7.8K) and PS(5.5K)-b-PI(18.8K), were studied in order to clarify the effects of the relative chain length of each block on the micelle structure in the selective solvents. PS(7.2K)-b-PI(7.8K), which is nearly symmetric, showed only spherical micelles in the DMP/toluene mixture. The basic spherical micellar shape of PS(7.2K)-b-PI(7.8K) did not change with chi, while the size and aggregation number of the micelles increased as chi increased until 2.05 and then were saturated after that. PS(5.5K)-b-PI(18.8K), which is asymmetric, showed a structural change from spherical to cylindrical to vesicular micelles with an increase in the selectivity of the DMP/DEP and DEP/DBP mixtures (which was also confirmed by TEM and SAXS studies). Giant vesicular micelles with a diameter of approximately 2.5 microm were observed in high-selectivity solvents. The size of the vesicular micelle seemed to decrease as selectivity decreased. The systematic changes of the micellar structures of PS(5.5K)-b-PI(18.8K), via changes in solvent selectivity, could be demonstrated through TEM images, which were prepared by evaporating the solvent of the cross-linked micellar solution onto the carbon-coated grid after dialysis.     

Preparation of non‐spherical particles from amphiphilic block copolymers

Simple self‐assembly techniques to fabricate non‐spherical polymer particles, where surface composition and shape can be tuned through temperature and the choice of non‐solvents was developed. A series of amphiphilic polystyrene‐b‐poly(2‐ethyl‐2‐oxazoline) block copolymers were prepared and through solvent exchange techniques using varying non‐solvent composition a range of non‐spherical particles were formed. Faceted phase separated particles approximately 300 nm in diameter were obtained when self‐assembled from tetrahydrofuran (THF) into water compared with unique large multivesicular particles of 1200 nm size being obtained when assembled from THF into ethanol (EtOH). A range of intermediate structures were also prepared from a three part solvent system THF/water/EtOH. These techniques present new tools to engineer the self‐assembly of non‐spherical polymer particles. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 750–757     

Degradation behaviors of star-shaped poly(ethylene glycol)-poly(?-caprolactone) nanoparticles in aqueous solution

Star-shaped poly(ethylene glycol) (PEG)-poly(?-caprolactone) (?-PCL) block copolymers were synthesized via a ring-opening polymerization. Nanoparticles prepared by the precipitation/solvent evaporation technique exhibit a core-shell structure. The hydrolytic degradation of 3-arm PEG-PCL copolymeric nanoparticles was studied by dynamic light scattering (DLS), nuclear magnetic resonance (NMR) and gel permeation chromatography (GPC). It was found that copolymers with shorter PCL block length degraded faster. The sizes of nanoparticles fluctuated during the initial degradation period, and then increased slightly before finally dropping off. The degradation mainly occurred at CL-CL linkages firstly then at the EO-CL linkages. The CL/EO molar ratios and the molecular weights of copolymers decreased as degradation time and a zero-order degradation behavior was observed.     

Polystyrene-b-poly(acrylic acid) vesicle size control using solution properties and hydrophilic block length

Polymeric vesicles have attracted considerable attention in recent years, since they are a model for biological membranes and have versatile structures with several practical applications. In this study, we prepare vesicles from polystyrene-b-poly(acrylic acid) block copolymer in dioxane/water and dioxane/THF/water mixtures. We then examine the ability of additives (such as NaCl, HCl, or NaOH), solvent composition, and hydrophilic block length to control vesicle size. Using turbidity measurements and transmission electron microscopy (TEM) we show that larger vesicles can be prepared from a given copolymer by adding NaCl or HCl, while adding NaOH yields smaller vesicles. The solvent composition (ratio of dioxane to THF, as well as the water content) can also determine the vesicle size. From a given copolymer, smaller vesicles can be prepared by increasing the THF content in the THF/dioxane solvent mixture. In a given solvent mixture, vesicle size increases with water content, but such an increase is most pronounced when dioxane is used as the solvent. In THF-rich solutions, on the other hand, vesicle size changes only slightly with the water concentration. As to the effect of the acrylic acid block length, the results show that block copolymers with shorter hydrophilic blocks assemble into larger vesicles. The effect of additives and solvent composition on vesicle size is related to their influence on chain repulsion and aggregation number, whereas the effect of acrylic acid block length occurs because of the relationship among the block length, the width of the molecular weight distribution, and the stabilization of the vesicle curvature.     

Adsorption of poly(ethylene oxide)-b-poly(epsilon-caprolactone) copolymers at the silica-water interface

The adsorption of amphiphilic poly(ethylene oxide)-b-poly(epsilon-caprolactone) and poly(ethylene oxide)-b-poly(gamma-methyl-epsilon-caprolactone) copolymers in aqueous solution on silica and glass surfaces has been investigated by flow microcalorimetry, small-angle neutron scattering (SANS), surface forces, and complementary techniques. The studied copolymers consist of a poly(ethylene oxide) (PEO) block of M(n) = 5000 and a hydrophobic polyester block of poly(epsilon-caprolactone) (PCL) or poly(gamma-methyl-epsilon-caprolactone) (PMCL) of M(n) in the 950-2200 range. Compared to homoPEO, the adsorption of the copolymers is significantly increased by the connection of PEO to an aliphatic polyester block. According to calorimetric experiments, the copolymers interact with the surface mainly through the hydrophilic block. At low surface coverage, the PEO block interacts with the surface such that both PEO and PCL chains are exposed to the aqueous solution. At high surface coverage, a dense copolymer layer is observed with the PEO blocks oriented toward the solution. The structure of the copolymer layer has been analyzed by neutron scattering using the contrast matching technique and by tapping mode atomic force microscopy. The experimental observations agree with the coadsorption of micelles and free copolymer chains at the interface.     

Molar mass distribution of a commercial aliphatic hyperbranched polyester based on 2,2-bis(methylol)propionic acid

The determination of absolute molar mass averages (MMA) and molar mass distribution (MMD) of the fourth generation hyperbranched polyester Boltorn H40 (Perstorp Specialty Chemicals AB), synthesized from 2,2-bis(methylol)propionic acid (bis-MPA) as the AB2 monomer and ethoxylated pentaerythritol as the B4 core molecule was studied in dependence on the type of solvent, preparation procedure and solution concentration. Due to a large number of polar hydroxyl groups, ester, and also some residual carboxyl groups, a very stable H-bond network is formed at room temperature, that can-not be completely disrupted by dissolving the sample in solvents such as tetrahydrofuran (THF), N,N-dimethylacetamide (DMAc), a mixture of THF and methanol (9:1, v/v), and a solution of 0.7% LiBr in DMAc. The H-bonds between the polar groups break down completely and the dissolution of Boltorn H40 on the molecular level is achieved only when the sample is thermally pretreated at a minimum 140 C for at least 20 min prior to dissolution in solvents THF/methanol or LiBr/DMAc. Thus, determined MMA and molar mass distribution (MMD) of Boltorn H40 are independent on the kind of the solvent and solution concentration.