Structure and redox properties of CexPr1−xO2−δ mixed oxides and their catalytic activities for CO, CH3OH and CH4 combustion

A series of Ce_xPr_1−xO_2−δ mixed oxides were synthesized by a sol–gel method and characterized by Raman, XRD and TPR techniques. The oxidation activity for CO, CH₃OH and CH₄ on these mixed oxides was investigated. When the value x was changed from 1.0 to 0.8, only a cubic phase CeO₂ was observed. The samples were greatly crystallized in the range of the value x from 0.99 to 0.80, which is due to the formation of solid solutions caused by the complete insertion of Pr into the CeO₂ crystal lattices. Raman bands at 465 and 1150 cm⁻¹ in Ce_xPr_1−xO_2−δ samples are attributed to the Raman active F_2g mode of CeO₂. The broad band at around 570 cm⁻¹ in the region of 0.3 ≤ x ≤ 0.99 can be linked to oxygen vacancies. The new band at 195 cm⁻¹ may be ascribed to the asymmetric vibration caused by the formation of oxygen vacancies. The TPR profile of Pr₆O₁₁ shows two reduction peaks and the reduction process is followed: . The reduction temperature of Ce_xPr_1−xO_2−δ mixed oxides is lower than those of Pr₆O₁₁ or CeO₂. TPR results indicate that Ce_xPr_1−xO_2−δ mixed oxides have higher redox properties because of the formation of Ce_xPr_1−xO_2−δ solid solutions. The presence of the oxygen vacancies favors CO and CH₃OH oxidation, while the activity of CH₄ oxidation is mostly related to reduction temperatures and redox properties.     

Synthesis of ferrocenyl-1,2-diketones and related compounds: Crystal and molecular structures of 1,2-diferrocenylethanedione and 1-ferrocenyl-2-(4-biphenylyl) ethanedione

Ferrocenyl-1,2-diketones FcCOCOR, 3, [Fc = (C₅H₅)Fe(C₅H₄)] can be prepared by oxidation of acylferrocenes FcCOCH₂R or, more efficiently, by oxidation of the isomeric ketones FcCH₂COR, 2. The ketones 2 are in turn readily synthesized from the salt (FcCH₂PPh₃)⁺I⁻ via the acylated salts [FcCH(COR)PPh₃]⁺I⁻. The haloacylferocenes FcCOCCl_x H_3−x (x = 1, 2, 3, of which the x = 2 example is synthetically equivalent to a diketone) are synthesized by Friedel—Crafts acylation of ferrocene using CCl_xH_3−xCOCl/AlCl₃, but the reaction proceeds via two parallel pathways, one giving the normal acyl derivatives FcCOCCl_xH_3−x and the other giving the reduced products FcCOCCl_x−1H_4−x. Two diketones FcCOCOFc 3b and FcCOCOC₆H₄Ph 3c have been structurally characterised by single-crystal X-ray diffraction.     

Single crystal growth of Bi1−xSrxMnO3—Thermodynamics and experiment

The primary crystallization field of a perovskite solid solution Bi_1−xSr_xMnO_3−δ was delimited by calculating the respective phase equilibria in the quaternary Bi–Sr–Mn–O system. The calculations are based on the recent assessment involving all three ternary subsystems, a quaternary liquid approximated as a mixture of Mn, MnO, Mn₂O₃, SrO and Bi₂O₃ species with binary Redlich–Kister coefficients and the perovskite phase described in terms of a point defect model allowing Sr²⁺ for Bi³⁺ substitution, oxygen vacancy formation and the related Mn³⁺/Mn⁴⁺ mixing on Mn-sublattice. The crystallization path and the composition of the crystallized solid solution are compared with single crystal growth experiments performed by self-flux method from a Bi-rich melt. The crystallization path obtained for a selected feed composition for which the largest and high quality single crystal have been grown, turns out to end very close to the global eutectic point.     

Polarized absorption spectra and polarized Raman spectra of single crystals of trans(Cl2)-[CoCl2(NH3)n(H2O)4−n]Cl complexes (n = 2, 3, 4)

The title cobalt(III) complexes have been investigated by polarized absorption and Raman spectroscopies of the single crystals. The symmetry properties of the d-electron orbitals and of the vibrational modes attributable to the Raman bands of trans(Cl₂)-[CoCl₂(NH₃)_n(H₂O)_4−n]Cl complexes (n = 2, 3, or 4) were examined to elucidated the peculiar observation that ligand substitution causes no splitting of the 15 200-cm⁻¹ absorption band and the 250-cm⁻¹ Raman band. Effects of replacing the NH₃ ligand with H₂O on the electronic structure, atom–atom force constants and vibrational modes of these complex ions are briefly described.     

Phase equilibria and crystal structure of the solid solution LaFe1−xNixO3−δ (0 ≤ x ≤ 1)

Phase equilibria in the LaFeO₃–“LaNiO₃” were studied at 1100 °C in air. The samples were synthesized by standard ceramic and/or solution route via nitrate or citrate precursors. According to the results of XRD it was found that the homogeneity ranges of LaFe_1−xNi_xO_3−δ solid solution lay within 0.0 ≤ x ≤ 0.4 (sp.gr. Pbnm) and 0.6 ≤ x ≤ 0.8 (sp.gr. ). The structural parameters (bond lengths, atom coordinates) for the single-phase samples were refined using Rietveld analysis. The unit cell parameters versus LaFe_1−xNi_xO_3−δ composition are presented.     

Coordination geometry of chromium(VI) species. The first example of cis-bridging chromate ions in helically structured catena(μ-CrO4-O,O′)[Ni(HIm)3H2O]

Nickel(II) chromate complex with imidazole (HIm) was isolated from the [Ni²⁺–HIm–CrO₄²⁻] system in various experimental conditions, i.e. reagent molar ratios and nickel(II) salts. The catena(μ-CrO₄-O,O′)[Ni(HIm)₃H₂O] (1) crystallizes in monoclinic crystal system—space group P2₁/n with cell parameters: a=11.784(2), b=8.899(2), c=13.934(3) (Å), β=95.19(3) (°). The unit cell contains two independent helixes, left- and right-handed, stabilized by intrahelical and interhelical hydrogen bonds (HB) and π–π interactions. The cis coordination of the CrO₄²⁻ anions and the HB systems appeared to be the main determinants of the helical architecture. To the best of our knowledge the cis-chromate coordination was observed for the first time. The cis coordination causes the distortion of the nickel octahedron, which was analysed by 4 K single crystal electronic spectra with D_4h symmetry approximation (gaussian resolution and crystal field parameters). This symmetry was also confirmed with the polarised electronic spectra. The magnetic properties of the complex suggest the occurrence of weak intrachain antiferromagnetic interactions between the magnetic Ni^II center. The computational DFT studies of complex 1 assuming three possible isomers mer[(HIm)₃]–cis[(CrO₄²⁻)₂], mer–trans and fac–cis suggested that the main contribution to the stability of 1 might have interhelical and intrahelical hydrogen bonds.     

Theoretical studies on the BN substituted fullerenes C70−2x(BN)x (x=1–3)—isoelectronic equivalents of C70

The equilibrium structures and relative stabilities of BN-doped fullerenes C_70−2x(BN)_x (x=1–3) have been studied at the AM1 and MNDO level. The most stable isomers of C_70−2x(BN)_x have been found out and their electronic properties have been predicted. The calculation results show that the BN substituted fullerenes C_70−2x(BN)_x have considerable stabilities, though they are less stable than their all carbon analog. For C₆₈BN, the isomers whose BN is located in the most chemically active bonds of C₇₀ (namely B and A) are among the most stable species, of which B is predicted to be the ground state. The stabilities of C₆₈BN decrease and the dipole moments increase with increasing the distance between the heteroatoms. For C₆₆(BN)₂, the lowest energy species is the isomer in which the B–N–B–N bond is formed; For C₆₄(BN)₃, the most stable species should have three BN units located in the same hexagon to form B–N–B–N–B–N ring. The ionization potentials and the affinity energies of the most stable species of BN-doped C₇₀ are almost the same as those of C₇₀ because of the isoelectronic relationship. The ionization potentials and affinity energies depend on the relative position of the heteroatoms in C₆₈BN, the chemical reactivities of the isomers whose heteroatoms are well separated should differ significantly from their all carbon analog.     

End unit effect on the Tg of differentiated series of perfluoro-poly (oxymethylene-co-oxyethylene) oligomers

Twelve series of linear oligomers of four different degrees of polymerization (x_n = 8.77−41.55), having a common perfluorinated random copolymeric chain as molecular body and two equal foreign end units of one of the types listed in Table 1, have been synthesized by derivatization of base samples of one of them having a diolic---CH₂OH functionality. The glass transition temperature T_g of all the series was measured and thus examined as a function of x_n. A clear end unit effect is observed, dominantly determined in every series by chemical nature and structure of the end units, quantitatively expressed at any x_n by different positive or negative T_g deviations from the common asymptotic T_g∞ value. The results are also discussed in terms of copolymer end effect and of relation between T_g and end copolymeric composition.     

Structure and stability of closo-BnHn−2(CO)2 (n = 5–12)

Closo-B_nH_n−2(CO)₂ (n = 5–12), isolobal analogues of closo-C₂B_n−2H_n, have been investigated at the B3LYP/6-311+G^**density functional level of theory. The most stable isomers of closo-B_nH_n−2(CO)₂ are similar to those of closo-C₂B_n−2H_n in geometric patterns apart from closo-B₆H₄(CO)₂, and closo-B_nH_n−2(CO)₂ is much less strained than closo-C₂B_n−2H_n. Energetic analysis identifies closo-B₆H₄(CO)₂, closo-B₁₂H₁₀(CO)₂ and closo-B₁₀H₈(CO)₂ to be most stable, of which the latter two cages have been prepared experimentally. On the basis of the negative and rather large nucleus independent chemical shifts (NICS), closo-B_nH_n−2(CO)₂ are aromatic. To aid further experimental study, the CO stretching frequencies have been computed.     

Synthesis and low temperature fluorination of the alkaline-earth palladates Ba2−xSrxPdO3 (x = 0–2)

Since the discovery of superconductivity in Sr₂CuO₂F_2+δ there has been an increased interest in ternary oxide-fluorides. Sr₂CuO₂F_2+δ is prepared via low temperature (T = 220 °C) reaction routes. Low temperature fluorination induces an interesting structural rearrangement in the parent compound Sr₂CuO₃, which is a one-dimensional material containing linear chains of vertex sharing CuO₄ squares along the crystallographic b axis. Upon fluorination, one oxide is substituted by two fluorides and Cu²⁺ becomes octahedrally coordinated by four oxides and two fluorides. The fluorinated compound Sr₂CuO₂F_2+δ displays the T-type structure (La₂CuO₄). Insertion of excess fluorine, δ, also takes place and this fluorine occupies interstitial sites in the T structure. Although the starting material Ca₂CuO₃ is isostructural to Sr₂CuO₃, Ca₂CuO₂F_2+δ displays the T′ (Nd₂CuO₄) structure due to the smaller radius of Ca²⁺ compared to that of Sr²⁺.

The alkaline-earth palladates with the general formula A₂PdO₃ (A = Ba, Sr) are isostructural with the A₂CuO₃(A = Ca, Sr) materials. We prepared the Ba_2−xSr_xPdO₃ (x = 0–2) series and performed low temperature fluorination, which led to the synthesis of the series Ba_2−xSr_xPdO₂F_2+δ (0 ≤ x ≤ 1.5). All the compounds in the Ba_2−xSr_xPdO₂F_2+δ series show T′ structure (Ca₂CuO₂F_2+δ). Similarities and differences with Sr₂CuO₂F_2+δ and Ca₂CuO₂F_2+δ will be discussed.     

Spectroscopic and structural analysis of Ca substituted La orthoferrite

Samples of orthoferrites La_1−xCa_xFeO₃ (0.15≤x≤0.45) were synthesized by double sintering ceramic technique. X-ray diffraction and infrared spectroscopy experiments were carried out and discussed for the investigated samples. The data showed the formation of single-phase orthorhombic structure of space group Pbnm. The FTIR spectra were performed in the region (1200–200 cm⁻¹). Four main absorption bands were present with some side bands and shoulders in the range (1200–400 cm⁻¹). Another four bands were appeared in the range (400–200 cm⁻¹). The positions, intensities and values of the absorptions bands vary depending on the Ca content in the samples. The first absorption band appeared at about 920 cm⁻¹ was assigned to the La–O stretching vibration.     

Sub-solidus phase equilibria in CeO2–SrO system

In this communication, we report on the synthesis and characterization of a series of compounds with the general composition Ce_1−xSr_xO_2−x (0.0≤x≤1.0), to establish a detailed phase relation in the CeO₂–SrO system. The X-ray diffraction (XRD) pattern of the each product was refined to determine the solid solubility and the homogeneity range. The solid solubility limit of SrO in CeO₂ lattice, under the slow cooled conditions, is represented as Ce_0.91Sr_0.09O_1.91 (i.e. 9 mol% of SrO). A careful delineation of the phase boundary revealed that the stoichiometric SrCeO₃, in fact, contains a little amount of CeO₂ also. The mono-phasic compound could be obtained at the nominal composition Sr_0.55Ce_0.45O_1.45. The nominal composition Sr₂CeO₄, under the heat treatment used in the present investigation, was a bi-phasic mixture of SrCeO₃ and SrO. No new ordered phases were obtained in this system.     

Formation region and hydrogen storage abilities of perovskite-type hydrides

Formation region and hydrogen desorption and absorption properties of the perovskite-type structure in Li_xNa_1−xMgH₃ with x = 0, 0.17, 0.33, 0.50 and 1.00 were studied in the present work. The experimental results are reasonably explained from the viewpoint of the geometric restrictions of ions that are described by so-called Goldschmidt tolerance factors. In NaMgH₃ (x = 0), two plateau pressures of about 0.040 and 0.15 MPa were clearly detected by hydrogen pressure–composition (p–c) isotherm measurement at 673 K. Moreover, NaMgH₃ can be reversibly formed in 1.0 MPa of hydrogen at 673 K, from the decomposed phase of elemental Na and Mg.     

The synthesis, vibrational spectroscopy, and crystal and molecular structure of [H3NCH2CH2NH3][PdBr6]

The complex [H₃NCH₂CH₂NH₃][PdBr₆] has been isolated as well-formed brown crystals. The Raman (single crystal) and FTIR (wax disc) spectra of the complex have been recorded but the band assignments are complicated by extensive factor group splitting and resonance effects. The crystal belongs to space group Pnnm, with Z = 2, each ion occupying sites of 2/m (C_2h) symmetry. The [PdBr₆]²⁻ ion is very close to octahedral, the two unique PdBr distances, 2.466(3) and 2.470(3) Å, being equal within experimental error and the BrPdBr angles being 90 ± 0.8°. The diammonium cation has an extended, planar, trans structure.     

Mixed-metal cluster chemistry VI: Phosphine substitution at CpMoIr3(μ-CO)3(CO)8; X-ray crystal structure of CpMoIr3(μ-CO)3(CO)7(PPh3)

Reactions of CpMoIr₃(μ-CO)₃(CO)₈ (1) with stoichiometric amounts of phosphines afford the substitution products CpMoIr₃(μ-CO)₃(CO)_8−x (L)_x (L = PPh₃, x = 1 (2), 2 (3); L = PMe₃, x = 1 (4), 2 (5), 3 (6)) in fair to good yields (23–54%); the yields of both 3 and 6 are increased on reacting 1 with excess phosphine. Products 2–5 are fluxional in solution, with the interconverting isomers resolvable at low temperatures. A structural study of one isomer of 2 reveals that the three edges of an MoIr₂ face of the tetrahedral core are spanned by bridging carbonyls, and that the iridium-bound triphenyiphosphine ligates radially and the molybdenum-bound cyclopentadienyl coordinates axially with respect to this Molr₂ face. Information from this crystal structure, ³¹P NMR data (both solution and solid-state), and results with analogous tungsten—triiridium and tetrairidium clusters have been employed to suggest coordination geometries for the isomeric derivatives.     

Preparation of dense, ultra-thin MIEC ceramic membranes by atmospheric spray-pyrolysis technique

Dense ceramic mixed ionic and electronic conducting membranes have been deposited by atmospheric spray-pyrolysis technique onto porous ceramic substrates. Perovskite oxide layers, i.e. manganites La_1−xSr_xMnO₃, ferrites La_1−xSr_xFe_1−y(Co,Ni)_yO₃, gallates La_1−xSr_xGa_1−y(Co,Ni,Fe)_yO₃, cobaltites La_1−xSr_xCoO₃ and related perovskites such as lanthanum nickelate La₂NiO₄ layers have been prepared. The structure, morphology and composition of the layers were characterised by XRD, SEM and WDS, respectively. Density and gas tightness of the layers were studied as a function of deposition process parameters, film thickness (from 0.5 to 3 μm) and preparation procedure. The presence of cracks and defects due to thermo-mechanical stresses applied during or after the preparation process were correlated with the membrane composition and the corresponding thermal expansion coefficient differences between substrates and membranes.     

Raman scattering study of highly fluorinated graphite

Raman spectra of highly fluorinated C_xF samples (1<x<2) prepared at room temperature and 515°C were measured. C_xF samples prepared at room temperature exhibited two Raman bands at 1593–1583 and 1555–1542 cm⁻¹. Graphite samples fluorinated at 515°C for 1 and 2 min also gave similar bands at 1581–1580 and 1550–1538 cm⁻¹. However, graphite samples fluorinated from 15 min to 10 h at 515°C no longer showed such spectra. The Raman peaks shifted to lower frequencies with increasing fluorine concentration in C_xF. This trend is due to the weakening of the C---C bonds of the graphene layers. Observation of both kinds of Raman bands suggests the coexistence of two highly fluorinated phases, C₂F and C₁F, in the samples. The process of formation of graphite fluoride is discussed on the basis of the Raman spectra of C_xF samples obtained at 515°C.     

Studies of sorption-desorption processes in the CexLa1−xNi5H2 system by DSC

The dependence of the integral enthalpy of hydrogenation (or dehydrogenation) of the intermetallic compounds (IMCs) Ce_xLa_1−xNi₅ (x = 0, 0.05, 0.1 or 0.3) on pressure in the range 0.5–6 MPa was studied by the method of differential scanning calorimetry. It has been shown that at x = 0 and x = 0.05 the absorption (or desorption) proceeds via the formation of a stable intermediate hydride phase.     

Matrix-isolation spectroscopy of Pb2

Fluorescence and Raman scattering were observed from Pb₂ isolated in neon and argon matrices. Two new excited states were observed by two-photon stepwise excitations, which involve low-lying electronic states of Pb₂. Most spectroscopic constants of the states observed could be given and complement previous results. Two resonance Raman progressions with ω_c = 112.5 and 123.1 cm⁻¹ and a single Raman signal at 80 cm⁻¹ were observed in argon matrices. The ω_c = 123.1 cm⁻¹ Raman signal which had recently been assigned to a larger Pb cluster was shown to arise from Raman scattering within the electronically excited A state of Pb₂ at 5500 cm⁻¹.     

Molecular motion and phase transition in perovskite-type (CH3)nNH4−nSnCl3 (n=1–4) studied by proton NMR spin–lattice relaxation

Powder X-ray diffraction, ¹¹⁹Sn NMR spectra, and ¹H NMR spin–lattice relaxation times, T₁, were measured for (CH₃)_nNH_4−nSnCl₃ (n=1–4). From the Rietveld analysis, it is shown that all four compounds crystallize into deformed perovskite-type structures at room temperature. The temperature dependence of ¹H T₁ was analyzed in terms of the CH₃ reorientation and other motions of the whole cation. Except for the phase transition in CH₃NH₃SnCl₃, which is from monoclinic to rhombohedral at 331 K, ¹H T₁ was continuously changed at other phase transitions in this compound as well as in the n=2–4 compounds, suggesting that the transitions are not caused by the change of the motional state of the cation but by an instability of the [SnCl₃]_nⁿ⁻ perovskite lattice.