Synthesis and Characterization of Calix[4]arene Functionalized Poly(ethylene glycol) Derivatives

Calix[4]arenes with both ligating and methoxy poly(ethylene glycol) groups appended have been synthesized using several approaches, involving the formation of sulfonyl ester groups on the wide rim, Schiff base derivatives on the narrow rim, and thioether groups on both the wide and narrow rims. These new derivatives have been characterized by a combination of infrared and ¹H NMR spectroscopy. Compounds 10 and 11 are insoluble in both water and aqueous poly(ethylene glycol), but the other new compounds are soluble.     

Thermal oxidation of blends of poly(ethylene oxide) and poly(methyl methacrylate)

Thermal oxidation of poly(ethylene oxide) (PEO) and its blends with poly(methyl methacrylate) (PMMA) were studied using oxygen uptake measurements. The rates of oxidation and maximum oxygen uptake contents were reduced as the content of PMMA was increased in the blends. The results were indicative of a stabilizing effect by PMMA on the oxidation of PEO. The oxidation reaction at 140°C was stopped at various stages and PMMA was separated from PEO and its molecular weights were measured by gel permeation chromatography (GPC). The decrease in the number-average molecular weight of PMMA was larger as the content of PEO increased in the blends. The visual appearance of the films suggested that phase separation did not occur after thermal oxidation. The activation energy for the rates of oxidation in the blends was slightly increased compared to pure PEO. © 1992 John Wiley & Sons, Inc.     

Quaternized amino functionalized cross-linked polyacrylamide as a new solid-liquid phase transfer catalyst in reduction of carbonyl compounds with NaBH4

Poly[N-(2-aminoethyl)acrylamido]trimethyl ammonium chloride resin was developed as a new polymeric phase transfer catalyst. This quaternized polyacrylamide catalyzed the chemoselective reduction of aldehydes and ketones by NaBH₄ to give corresponding alcohols in high yields under mild conditions.     

Interpenetrating polymer networks of poly(dimethyl siloxane–urethane) and poly(methyl methacrylate)

Simultaneous IPNs of poly(dimethyl siloxane-urethane) (PDMSU)/poly(methyl methacrylate) (PMMA) and related isomers have been prepared by using new oligomers of bis(β-hydroxyethoxymethyl)poly(dimethyl siloxane)s (PDMS diols) and new crosslinkers biuret triisocyanate (BTI) and tris(β-hydroxylethoxymethyl dimethylsiloxy) phenylsilane (Si-triol). Their phase morphology have been characterized by DSC and SEM. The SEM phase domain size is decreased by increasing crosslink density of the PDMSU network. A single phase IPN of PDMSU/PMMA can be made at an M_c = 1000 and 80 wt % of PDMSU. All of the pseudo- or semi-IPNs and blends of PDMSU and PMMA were phase separated with phase domain sizes ranging from 0.2 to several micrometers. The full IPNs of PDMSU/PMMA have better thermal resistance compared to the blends of linear PDMSU and linear PMMA. © 1993 John Wiley & Sons, Inc.     

Synthesis and characterization of new cardo polyimides prepared from 5,5-Bis[4-(4-aminophenoxy)phenyl]-4,7-methanohexahydroindane

A new cardo diamine monomer, 5,5-bis[4-(4-aminophenoxy)phenyl]-4,7-methanohexahydroindane (II), was prepared in two steps with high yield. The monomer was reacted with six different aromatic tetracarboxylic dianhydrides in N,N-dimethylacetamide (DMAc) to obtain the corresponding cardo polyimides via the poly(amic acid) precursors and thermal or chemical imidization. All the poly(amic acid)s could be cast from their DMAc solutions and thermally converted into transparent, flexible, and tough polyimide films which were further characterized by x-ray and mechanical analysis. All of the polymers were amorphous and the polyimide films had a tensile strength range of 89–123 MPa, an elongation at break range of 6–10%, and a tensile modulus range of 1.9–2.5 GPa. Polymers V_c, V_e, and V_f exhibited good solubility in a variety of solvents such as N-methyl-2-pyrrolidinone (NMP), DMAc, N,N-dimethylformamide (DMF), dimethyl sulfoxide (DMSO), pyridine, γ-butyrolactone, and even in tetrahydrofuran and chloroform. These polyimides showed glass-transition temperatures between 274 and 299°C and decomposition temperatures at 10% mass loss temperatures ranging from 490 to 521°C and 499 to 532°C in nitrogen and air atmospheres, respectively. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2815–2821, 1999     

Design of “smart” segmented polymers by incorporating random copolymers as building blocks

This article is dealing with the design of novel segmented polymers comprising homopolymer and random copolymer building blocks designated as block-random. This type of polymeric materials can be prepared through macromolecular engineering by using controlled polymerization methods. By replacing a homopolymer block with a random one, in block copolymer topologies, further tuning of the copolymer properties can be achieved. The present article highlights the recent developments on block-random segmented macromolecules, bearing building blocks of tunable properties (e.g. thermo-sensitivity (LCST), hydrophobicity) and exhibiting responsive behavior in aqueous environments. Furthermore, preliminary novel results regarding pH-sensitive segmented macromolecules of various topologies, bearing random polyampholyte blocks among others, are also demonstrated and discussed.     

Photochemical and thermal cyclizations of 4-(2-azidophenyl)-3,4-dihydropyrimidin-2-ones for the synthesis of 4-methylenepyrimidino[5,4-b]indol-2-ones

Photochemical and thermal cyclization of 4-(2-azidophenyl)-3,4-dihydropyrimidin-2-ones could afford fused indoles, such as 1,2,3a,9b-tetrahydro-4-methylenepyrimidino[5,4-b]indol-2-ones and 1,3,5,6,7a,12b-hexahydroquinazolino[9,4-b]indol-2,7-dione in high yields via nitrene electrophilic addition and rearrangement reactions.     

Ion conductivity studies of blends of poly(methyl methacrylate)-g-poly(ethylene glycol) and poly(ethylene glycol) complexed with LiCF3 SO3

Polymer electrolytes which are adhesive, transparent, and stable to atmospheric moisture have been prepared by blending poly(methyl methacrylate)-g-poly(ethylene glycol) with poly(ethylene glycol)/LiCF₃ SO₃ complexes. The maximum ionic conductivities at room temperature were measured to be in the range of 10⁻⁴ to 10⁻⁵ s cm⁻¹. The clarity of the sample was improved as the graft degree increased for all the samples studied. The graft degree of poly(methyl methacrylate)-g-poly(ethylene glycol) was found to be important for the compatibility between the poly(methyl methacrylate) segments in poly(methyl methacrylate)-g-poly(ethylene glycol) and the added poly(ethylene glycol), and consequently, for the ion conductivity of the polymer electrolyte. These properties make them promising candidates for polymer electrolytes in electrochromic devices. © 1996 John Wiley & Sons, Inc.     

Synthesis of carbosilane block copolymers by means of a living anionic polymerization of 1,1-diethylsilacyclobutane

Block polymerization of 1,1-diethylsilacyclobutane with styrene derivatives and methacrylate derivatives was investigated. Sequential addition of styrene to a living poly(1,1-diethylsilabutane), which was prepared from phenyllithium and 1,1-diethylsilacyclobutane in THF–hexane at −48°C, gave poly(1,1-diethylsilabutane)-b-polystyrene. Similarly, addition of 4-(tert-butyldimethylsiloxy)styrene to the living poly(1,1-diethylsilabutane) provided poly(1,1-diethylsilabutane)-b-poly(4-(tert-butyldimethylsiloxy)styrene). Poly(1,1-diethylsilabutane)-b-poly(methyl methacrylate) was obtained by treatment of living poly(1,1-diethylsilabutane) with 1,1-diphenylethylene followed by an addition of methyl methacrylate. Poly(1,1-diethylsilabutane)-b-poly(2-(tert-butyldimethylsiloxy)ethyl methacrylate) was also synthesized by adding 2-(tert-butyldimethylsiloxy)ethyl methacrylate to the living poly(1,1-diethylsilabutane) which was end-capped with 1,1-diphenylethylene in the presence of lithium chloride. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2699–2706, 1998     

Synthesis, Structure and Photoluminescence of a New Cd(Ⅱ)Coordination Polymer Based on 4-(Carboxymethoxy)-benzoic Acid and 1,10-Phenanthroline Derivative

A new 1D coordination polymer, [Cd2(L1)2(L2)2]·H2O (1, H2L1 = 4-(carboxy-methoxy)benzoic acid and L2 = 2-(4-fluorophenyl)-1H-imidazo[4,5-f][1,10]phenanthroline), has been hydrothermally synthesized and characterized by elemental analysis and single-crystal X-ray diffraction. It crystallizes in triclinic, space group Pī with a = 9.985(5), b = 10.768(5), c = 12.512(5), α = 68.959(5), β = 80.354(5), γ = 79.663(5)°, V = 1227.4(10) 3, Z = 1, C56H36Cd2F2N8O11, Mr = 1259.73, Dc = 1.704 g/cm3, F(000) = 630, μ(MoKa) = 0.949 mm-1, R = 0.0261 and wR = 0.0655. The L1 anions link the neighboring Cd(II) atoms to form a 1D double chain structure. The L2 ligands are alternately located on both sides of the double chains. More interestingly, the lateral L2 ligands from adjacent double chains are paired to furnish strong π-π interactions, yielding a 2D supramolecular layer. N-H···O, O-H···N and O-H···O hydrogen bonds further stabilize the structure of 1. The luminescent property of 1 was studied in solid state at room temperature.     

Ionic conductivity and compatibility studies of blends of poly(methyl methacrylate) and poly(propylene glycol) complexed with LICF3SO3

Stable to atmospheric moisture, adhesive and transparent polymer electrolytes have been prepared by blending poly(methyl methacrylate) (PMMA) with poly(propylene glycol)-425/LiCF₃SO₃ complexes. The blending of the polymers has been achieved by a method developed in our laboratory: free radical polymerization of methylmethacrylate in the polyether/salt matrix. A series of polymer blend complexes varying in PMMA content (up to 20% by weight) and oxygen/metal ratios (25, 16, and 8) have been synthesized and their properties studied. All the samples prepared in this study were found to be optically clear unlike the higher molecular weight poly(propylene glycol)-2000 (PPG-2000) system which required a minimum salt concentration to compatibilize a specific amount of PMMA with PPG. The mechanisms by which the salt holds the otherwise incompatible polymers together in a single phase have been investigated by FT-IR. Our studies show a weak coupling of the ether oxygens in the PPG with the ester groups of the PMMA through the lithium cations. Discrete changes has been observed in the FT-IR spectrum of PMMA when doped with the lithium salt hitherto unnoticed with other dopants. Gel permeation chromatography results of the PMMA samples isolated from the solid electrolytes indicate the molecular weight to vary between 43000 and 121000 with relatively narrow distributions, 1.6?2.0. The ionic conductivities of the polymer blend electrolytes were fairly high (10^?5 S/cm) at room temperature. The PMMA neither significantly influenced the T_g of the blend complexes nor effected the ionic conductivities drastically. The ionic conductivity as a function of temperature followed the empirical Vogel-Tammann-Fulcher equation. The blending of PMMA with PPG/LiCF₃SO₃ complexes was found to impart good adhesiveness to the solid electrolytes while making them stable to atmospheric moisture. © 1992 John Wiley & Sons, Inc.     

A strategy for the synthesis of 2-aryl-3-dimethylaminopyrazolo-[3,4-c]pyridines that utilizes [4+1] cycloaddition reactions of 5-arylazo-2,3,6-trisubstituted pyridines

In order to explore the viability and generality of a recently uncovered [4+1] cycloaddition based strategy for the preparation of pyrazolo[3,4-c]pyridine derivatives, members of a series of 5-arylazo-2,3,6-trisubstituted pyridines were prepared by reactions of 3-oxo-2-arylhydrazonopropanals with 3-oxo-3-phenylpropionitrile. The results show that 3-oxo-3-phenylpropionitrile reacts with hydrazone substrates, which do not contain electron-withdrawing substituents on the N-aryl ring of the arylhydrazone moieties, to efficiently produce 6-aryl-2-phenyl-5-arylazonicotinonitriles. In contrast, 2-amino-6-aryl-5-arylazo-3-benzoylpyridines are generated in reactions of 3-oxo-2-arylhydrazonopropanals, which contain electron-withdrawing substituents on the N-aryl moiety. In the forecasted manner, the 6-aryl-2-phenyl-5-arylazonicotinonitriles undergo smooth reactions with dimethylformamide dimethylacetal (DMF-DMA) that led to formation of a new class of 2-aryl-3-dimethylaminopyrazolo[3,4-c]pyridines. The mechanism for this process involves a [4+1] cycloaddition reaction that takes place through initial nucleophilic addition of dimethylamino)methoxycarbene, generated from DMF-DMA, to the azadiene moiety of the arylazopyridines followed by cyclization of the formed zwitterionic intermediate.     

Synthesis of Cytotoxic 4-Sulfonyl-, 4-Sulfonylthio-and 4-Sulfothioazetidinones-2

4-Sulfonylazetidinones-2 were synthesized by the reaction of DBU and organic halides on the esters of penicillin sulfones. 4-Sulfonylthio- and 4-sulfothioazetindinones-2 were synthesized by nucleophilic substitution of the 2-benzothiazolylthio groups in 4-(benzothiazolylthio)azetidinones-2 using sodium sulfinates or sodium hydrogen sulfite. A study of their cytotoxic activities revealed the anticancer effect of compounds containing methylsulfonylthio-, 4-tolylsulfonylthio-, and 4-methoxycarbonylamino-phenylsulfonylthio-substituents at position 4 of the -lactam ring relative to a wide range of monolayer cultures of cancer cells in vitro.     

How does the hydrophobic content of methacrylate ABA triblock copolymers affect polymersome formation?

Polymersomes are exciting self-assembled structures with great potential in pharmaceutical applications. A systematic investigation of a novel series of methacrylate-based polymersomes is reported in this study. Five well-defined ABA triblock copolymers with A being based on tri(ethylene glycol) methyl methacrylate and B being based on 2-(diethylamino)ethyl methacrylate (DMAEMA) were synthesized using a living polymerization method. The effect of the composition of the ABA triblock copolymers on the thickness of the hydrophobic membrane of the polymersomes and the release of a model drug is demonstrated.     

Multimonomer and cross-linked polymers formed by its copolymerization

Differential scanning calorimetry (DSC) and thermogravimetry (TG) were used to examine the thermal behavior of the multimonomer poly[2-(10-undecenoyloxy)ethyl methacrylate] (PUDEM) within the temperature range from -80 to 400°C. DSC measurements indicated that the polymer side chains were able to crystallize in paraffinic phase. PUDEM, added to methyl methacrylate (MM), can effectively copolymerize with essentially no homopolymer produced as shown by DSC (single T _g). The value of T _g depends on the PUDEM content, degree of cross-linking and the presence of free MM in the cross-linked product. This revised version was published online in August 2006 with corrections to the Cover Date.     

Syntheses and properties of organosoluble poly(ether imide)s from 1,1‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]cyclohexane dianhydride and aromatic diamines

A bis(ether anhydride) monomer, 1,1‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]cyclohexane dianhydride ( IV‐A ), was synthesized from the nitro displacement of 4‐nitrophthalodinitrile by the phenoxide ion of 1,1‐bis(4‐hydroxyphenyl)cyclohexane ( I‐A ), followed by alkaline hydrolysis of the intermediate bis(ether dinitrile) and dehydration of the resulting bis(ether acid). A novel series of organosoluble poly(ether imide)s ( VI _a–i )(PEIs) bearing cyclohexylidene cardo groups was prepared from the bis(ether anhydride) IV‐A with various aromatic diamines V _a–i via a conventional two‐stage process. The PEIs had inherent viscosities in the range of 0.48–1.02 dL/g and afforded flexible and tough films by solution‐casting because of their good solubilities in organic solvents. Most PEIs showed yield points in the range of 89–102 MPa at stress‐strain curves and had tensile strengths of 78–103 MPa, elongations at breaks of 8–62%, and initial moduli of 1.8–2.2 GPa. The glass‐transition temperatures (T_g's) of these PEIs were recorded between 200–234 °C. Decomposition temperatures of 10% weight loss all occurred above 490 °C in both air and nitrogen atmospheres, and their residues were more than 43% at 800 °C in nitrogen atmosphere. The cyclohexane cardo‐based PEIs exhibited relatively higher T_g's, better solubilities in organic solvents, and better tensile properties as compared with the corresponding Ultem® PEI system. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 788–799, 2001     

Poly(ethylene oxide)/poly(methyl methacrylate) (semi-)interpenetrating polymer networks: Synthesis and phase diagrams

Interpenetrating polymer networks (IPNs) of poly(ethylene oxide) (PEO) and poly(methyl methacrylate) (PMMA) were prepared by simultaneous network formation. The PEO network was produced by acid-catlayzed self-condensation of α,ω-bis(triethoxysilane)-terminated PEO in the presence of small amounts of water. The PMMA network was formed by free radical polymerization of MAA in the presence of divinylbenzene as crosslinker. The reaction conditions were adjusted to obtain similar crosslinking kinetics for both reactions. An attempt was made to construct a phase diagram of the IPNs by measuring the composition of the IPNs at the moment of the appearance of the phase separation, as indicated by the onset of turbidity. This composition could be determined because the siloxane crosslinks of the PEO network could be hydrolyzed in aqueous NaOH with the formation of linear, soluble PEO chains. The phase diagram was compared with phase diagrams of blends of linear polymers and of semi-IPNs (crosslinked PMMA and linear PEO), obtained under similar conditions, i.e. polymerization of MMA in the presence of varying amounts of PEO. It was observed that the form of the phase diagrams of the linear polymers is similar to that of the IPNs, but is quite different from that of the semi-IPNs. Thus, homogeneous transparent materials containing up to 60% of PEO could be prepared in the blends and the IPNs, but in the semi-IPNs, phase separation occurred with PEO contents as low as 10%.     

Synthesis of core/shell structure of glycidyl–functionalized poly(methyl methacrylate) latex nanoparticles via differential microemulsion polymerization

The differential microemulsion polymerization technique was used to synthesize the nanoparticles of glycidyl-functionalized poly(methyl methacrylate) or PMMA via a two-step process, by which the amount of sodium dodecyl sulfate (SDS) surfactant required was 1/217 of the monomer amount by weight and the surfactant/water ratio could be as low as 1/600. These surfactant levels are extremely low in comparison with those used in a conventional microemulsion polymerization system. The glycidyl-functionalized PMMA nanoparticles are composed of nanosized cores of high molecular weight PMMA and nano-thin shells of the random copolymer poly[(methyl methacrylate)-ran-(glycidyl methacrylate)]. The particle sizes were about 50 nm. The ratios of the glycidyl methacrylate in the glycidyl-functionalized PMMA were achieved at about 5–26 wt.%, depending on the reaction conditions. The molecular weight of glycidyl-functionalized PMMA was in the range of about 1 × 10⁶ to 3 × 10⁶ g mol⁻¹. The solid content of glycidyl-functionalized PMMA increased when the amount of added glycidyl methacrylate was increased. The glycidyl-functionalized polymer on the surface of nano-seed PMMA nanoparticles was a random copolymer which was confirmed by ¹H-NMR spectroscopy. The amounts of functionalization were investigated by the titration of the glycidyl functional group. The structure of the glycidyl-functionalized PMMA nanoparticles was investigated by means of TEM. The glycidyl-functionalized PMMA has two regions of T_g which are at around 90 °C and 125 °C, respectively, of which the first one was attributed to the poly[(methyl methacrylate)-ran-(glycidyl methacrylate)] and the second one was due to the PMMA. A core/shell structure of the glycidyl-functionalized PMMA latex nanoparticles was observed.     

The degradation of poly(methyl methacrylate) in the effect of negative thixotropy

An investigation of the degradation of poly(methyl methacrylate) in the case of negative thixotropy of its solutions in tricresyl phosphate showed that the number of polymer bonds broken by flow as expressed through the decrease of molecular weight in the course of the effect is determined by shear energy imposed on the system, irrespective of the velocity gradient and temperature used.     

Observations of crystallization and melting in poly(ethylene oxide)/poly(methyl methacrylate) blends by hot-stage atomic-force microscopy

The binary blend of poly(ethylene oxide)/atactic poly(methyl methacrylate) is examined using hot-stage atomic-force microscopy (AFM) in conjunction with differential scanning calorimetry and optical microscopy. It was found possible to follow in real time the melting process, which reveals itself to be nonuniform. This effect is ascribed to the presence of lamellae having different thicknesses. The crystallization process of poly(ethylene oxide) from the miscible melt is also followed in real time by AFM, affording detailed images of the impingement of adjacent spherulites and direct observation of lamellar growth and subsequent polymer solidification in the interlamellar space.© 1998 John Wiley & Sons, Inc. J. Polym. Sci. B Polym. Phys. 36: 2643–2651, 1998