Winkler地基上四边自由正交各向异性矩形薄板弯曲问题的辛叠加解

研究Winkler地基上正交各向异性矩形薄板弯曲方程所对应的Hamilton正则方程, 计算出其对边滑支条件下相应Hamilton算子的本征值和本征函数系, 证明该本征函数系的辛正交性以及在Cauchy主值意义下的完备性, 进而给出对边滑支边界条件下Hamilton正则方程的通解, 之后利用辛叠加方法求出Winkler地基上四边自由正交各向异性矩形薄板弯曲问题的解析解. 最后通过两个具体算例验证了所得解析解的正确性.     

梯度弹性基础上正交异性薄板的弯曲

基于能量法和变分原理,采用双参数弹性基础模型,研究了梯度弹性基础上正交异性薄板在分布载荷作用下的弯曲问题。首先,根据能量法与变分原理,给出了梯度弹性基础上正交异性薄板的弯曲微分平衡方程,并得到了梯度弹性基础刚度系数 与 的计算表达式;进而,假设 向正应力在厚度方向上均匀分布,推导了弹性基础 向位移衰减函数 的计算式。在算例中,通过将梯度弹性基础退化为均质基础,并与Vlazov模型对比,证明了本文理论的正确性;最后,求解了弹性模量呈幂律分布的梯度基础上薄板的挠度分布,分析了基础上下表层材料弹性模量比 与体积分数指数 对薄板挠度分布的影响。     

Symplectic system based analytical solution for bending of rectangular orthotropic plates on Winkler elastic foundation

This paper analyses the bending of rectangular orthotropic plates on a Winkler elastic foundation.Appropriate definition of symplectic inner product and symplectic space formed by generalized displacements establish dual variables and dual equations in the symplectic space.The operator matrix of the equation set is proven to be a Hamilton operator matrix.Separation of variables and eigenfunction expansion creates a basis for analyzing the bending of rectangular orthotropic plates on Winkler elastic foundation and obtaining solutions for plates having any boundary condition.There is discussion of symplectic eigenvalue problems of orthotropic plates under two typical boundary conditions,with opposite sides simply supported and opposite sides clamped.Transcendental equations of eigenvalues and symplectic eigenvectors in analytical form given.Analytical solutions using two examples are presented to show the use of the new methods described in this paper.To verify the accuracy and convergence,a fully simply supported plate that is fully and simply supported under uniformly distributed load is used to compare the classical Navier method,the Levy method and the new method.Results show that the new technique has good accuracy and better convergence speed than other methods,especially in relation to internal forces.A fully clamped rectangular plate on Winkler foundation is solved to validate application of the new methods,with solutions compared to those produced by the Galerkin method.     

横观各向同性弹性半空间地基上正交异性矩形中厚板弯曲解析解

对横观各向同性体通解进行双重傅里叶变换,获得了直角坐标系下横观各向同性弹性半空间地基受任意竖向荷载作用下的位移积分变换解;在此基础上建立了板与地基的变形协调方程,并与三个广义位移变量描述的弹性地基上四边自由正交各向异性矩形中厚板的弯曲控制方程相结合,用三角级数法,得出横观各向同性弹性半空间地基上四边自由正交异性矩形中厚板受任意竖向荷载作用的弯曲解析解。相关算例分析表明,本文方法是有效的。     

Perturbation analysis for the postbuckling of rectangular orthotropic plates

In this paper, applying perturbation method to von Kármán-type nonlinear large deflection equations of orthotropic plates by taking deflection as perturbation parameter, thé postbuckling behavior of simply supported rectangular orthotropic plates under inplane compression is investigated. Two types of in-plane boundary conditions are now considered and the effects of initial imperfections are also studied. Numerical results are presented for various cases of orthotropic composite plates having different elastic properties. It is found that the results obtained are in good agreement with those of experiments.     

多层正交异性矩形薄板弯曲振动稳定解析解

构造了带有补充项的双重正弦傅里叶级数通解来求解各种边界条件的多层正交各向异性矩形薄板的弯曲、振动和稳定问题.将坐标轴取在中性面上,求出用挠度表示的应力表达式,然后由横截面上每单位宽度的应力合成板的内力;再将层合板的内力代入板的平衡方程中得到板的控制方程,将多层板的物理参数折算为等价的单层板物理参数;最后联立控制方程与边界条件,求得未知量的系数并代入本文的通解中.本文的通解不需要叠加即可求解各种边界条件的板的弯曲、振动和稳定问题;现有的对于单层板的研究都可以用本文的方法拓展到多层板领域;对于复杂边界条件的板,也可以使用该通解分析.     

Bending of orthotropic plates resting on Pasternak’s foundations using mixed shear deformation theory

The mixed first-order shear deformation plate theory(MFPT) is employed to study the bending response of simply-supported orthotropic plates.The present plate is subjected to a mechanical load and resting on Pasternak’s model or Winkler’s model of elastic foundation or without any elastic foundation.Several examples are presented to verify the accuracy of the present theory.Numerical results for deflection and stresses are presented.The proposed MFPT is shown simplely to implement and capable of giving satisfactory results for shear deformable plates under static loads and resting on two-parameter elastic foundation.The results presented here show that the characteristics of deflection and stresses are significantly influenced by the elastic foundation stiffness,plate aspect ratio and side-to-thickness ratio.     

Basic equations of the problem of the nonlinear unsymmetrical bending for orthotropic rectangular thin plate with variable thickness

Under the case of ignoring the body forces and considering components caused by diversion of membrane in vertical direction ( z-direction ), the constitutive equations of the problem of the nonlinear unsymmetrical bending for orthotropic rectangular thin plate with variable thickness are given; then introducing the dimensionless variables and three small parameters, the dimensionaless governing equations of the deflection function and stress function are given.     

Modified equations of finite-size layered plates made of orthotropic material. Comparison of the results of numerical calculations with analytical solutions

This paper describes the modified bending equations of layered orthotropic plates in the first approximation. The approximation of the solution of the equation of the three-dimensional theory of elasticity by the Legendre polynomial segments is used to obtain differential equations of the elastic layer. For the approximation of equilibrium equations and boundary conditions of three-dimensional theory of elasticity, several approximations of each desired function (stresses and displacements) are used. The stresses at the internal points of the plate are determined from the defining equations for the orthotropic material, averaged with respect to the plate thickness. The construction of the bending equations of layered plates for each layer is carried out with the help of the elastic layer equations and the conjugation conditions on the boundaries between layers, which are conditions for the continuity of normal stresses and displacements. The numerical solution of the problem of bending of the rectangular layered plate obtained with the help of modified equations is compared with an analytical solution. It is determined that the maximum error in determining the stresses does not exceed 3 %.     

Analytical bending solutions of free orthotropic rectangular thin plates under arbitrary loading

This paper presents the analytical solutions for the bending of orthotropic rectangular thin plates by the double finite integral transform, which, as an effective tool in solving plate problems, should have received attention. As a representative and difficult problem in the theory of plates, free plates’ bending is successfully solved to demonstrate the accuracy of the method by comparing the present analytical solutions with those from the literature as well as those by the finite element method. With the proper integral transform kernels, the proposed solution procedure is applicable to the bending of orthotropic rectangular plates with all combinations of simply supported, clamped and free boundary conditions, which serves as an elegant approach to analytical solutions of plate bending problems.     

弹性地基上间断中厚矩形板的非线性静力分析

研究弹性地基上带传力杆的间断中厚矩形板的非线性静力特性。荷载在传力杆中的传递由竖向弹簧模拟,其弹簧刚度取决于传力杆的特性以及杆与板间的相互作用。根据能量变分原理,考虑地基耦合效应,建立了双参数地基上带传力杆的间断矩形中厚板的非线性静力控制方程。构造出一组满足所有边界条件的试探函数,应用伽辽金法对该组非线性方程进行求解。数值算例中,讨论了传力杆参数、板的结构参数及地基参数对弹性地基上间断矩形中厚板的非线性静力特性的影响。     

计入膜力塑性耗散效应的矩形板塑性动力响应

从能量的观点在小挠度理论中引入表征膜力塑性耗散效应的修正因子,基于刚性板块的总体平衡给出矩形板大挠度塑性动力响应的完全运动方程组,分析了理想刚塑性简支和固支矩形板在矩形脉冲和冲击载荷下包括移行塑性铰相的完全大挠度响应过程。解决了当矩形板的挠度达到厚度量级时弯矩、膜力的联合作用问题,理论预报的结果在板的挠度为10倍板厚的量级与实验结果符合良好,改进了只考虑弯矩作用的小挠度理论结果和模态近似估计。     

Vibrations of nonhomogeneous orthotropic rectangular plates with bilinear thickness variation resting on Winkler foundation

Free transverse vibrations of nonhomogeneous orthotropic rectangular plates with bilinear thickness variation resting on Winkler foundation are presented here using two dimensional boundary characteristic orthogonal polynomials in the Rayleigh-Ritz method on the basis of classical plate theory. Gram-Schmidt process has been used to generate orthogonal polynomials. The nonhomogeneity of the plate is assumed to arise due to linear variations in elastic properties and density of the plate material with the in-plane coordinates. The two dimensional thickness variation is taken as the Cartesian product of linear variations along the two concurrent edges of the plate. Effect of nonhomogeneity parameters, aspect ratio and thickness variation together with foundation parameter on the natural frequencies has been illustrated for the first three modes of vibration for four different combinations of clamped, simply supported and free edges correct to four decimal places. Three dimensional mode shapes for specified plate for all the four boundary conditions have been plotted. A comparison of results in special cases with published one has been presented.     

正交异性钢桥面板轮载横向效应的解析分析方法

在分析正交异性钢桥面板构造特点的基础上,将轮载影响范围内的桥面板简化为弹性支撑的平面框架,建立了正交异性钢桥面轮载横向效应的解析分析模型,推导了纵肋弹性支撑刚度和车轮荷载集度等效计算方法,提出了桥面板与U肋交接位置处横向弯曲应力的解析公式,讨论并明确了影响桥面板横向弯曲应力峰值的关键敏感影响因素,并以某钢箱梁为例证明了本文算法的合理性。研究发现,本文方法计算得到桥面板与U肋相交位置的横向应力值与有限元结果相差不超过10%,证实了本文算法的正确性,也为正交异性钢桥面的初步设计提供了极大的方便;正交异性钢桥面板的横向轮载应力随U肋厚度和高度增加而增大,但随顶板厚度和横隔板间距增大而减小;相对而言,顶板内横向拉应力受顶板厚度的影响最为显著,对腹板倾角和U肋腹板厚度的变化并不敏感。     

Effect of elastic foundation on the vibration of orthotropic elliptic plates with varying thickness

Two-dimensional boundary characteristic orthonormal polynomials are used in the Rayleigh–Ritz method to study the free vibration of rectangular orthotropic elliptic plates resting on a Winkler elastic foundation. Two types of varying thickness are considered: (1) linearly varying with respect to the concentric ellipses, (2) linearly varying along both the principal axes simultaneously. Numerical results for frequencies are presented in tables. Nodal lines are shown in figures. Effects of stiffness of elastic foundation, aspect ratios of plates, degree of orthotropy, and types of thickness variation on vibration frequencies of elliptical plates are also discussed.     

层状横观各向同性地基上异性矩形薄板的弯曲解析解

选用更具广泛性的层状横观各向同性弹性地基模型,来分析四边自由各向异性矩形地基板的弯曲解析解。先基于直角坐标下横观各向同性体的静力胡海昌通解,借助双重傅里叶变换及矩阵传递法,获得层状横观各向同性地基的静力位移场和应力场;然后将异性薄板的弯曲控制方程,与基于层状横观各向同性弹性地基的位移解建立的板与地基变形协调方程相结合,先按对称性分解,再用三角级数法,得出层状横观各向同性弹性地基上四边自由各向异性矩形薄板的弯曲解析解,包括地基反力、板的挠度及板的内力的解析表达式。克服了数值法的弊端,取消了对地基反力的假设,且避免了矩阵指数函数的计算;同时考虑了地基的层状性及板和地基的各向异性,从而得到板的内力及地基反力更切实际的分布规律。算例结果与文献的有限元结果吻合良好,证明本文方法是切实可行的。     

AN ANALYTICAL SOLUTION TO LARGE DEFLECTION EQUATIONS OF SIMPLY－SUPPORTED RECTANGULAR HYPERBOLOIDAL SHALLOW SHELLS OF ORTHOTROPIC COMPOSITES

ＡＮＡＮＡＬＹＴＩＣＡＬＳＯＬＵＴＩＯＮＴＯＬＡＲＧＥＤＥＦＬＥＣＴＩＯＮＥＱＵＡＴＩＯＮＳＯＦＳＩＭＰＬＹ－ＳＵＰＰＯＲＴＥＤＲＥＣＴＡＮＧＵＬＡＲＨＹＰＥＲＢＯＬＯＩＤＡＬＳＨＡＬＬＯＷＳＨＥＬＬＳＯＦＯＲＴＨＯＴＲＯＰＩＣＣＯＭＰＯＳＩＴＥＳＤ...     

横观各向同性弹性半空间地基上四边自由各向异性矩形薄板弯曲解析解

选用更具广泛性的横观各向同性弹性半空间地基模型,来分析四边自由各向异性矩形地基板的弯曲解析解．将异性薄板的弯曲控制方程,与基于横观各向同性弹性半空间地基位移解建立的板与地基变形协调方程相结合,先按对称性分解,然后用三角级数法,得出横观各向同性弹性半空间地基上四边自由各向异性矩形薄板的弯曲解析解,包括地基反力、板的挠度及内力的解析表达式．该解析解克服了数值法的弊端,取消了对地基反力的假设,板的内力及地基反力求解更切实际．算例结果与文献结果吻合良好,证明本文方法的可行性．     

The effect of support locations on the steady-state response of viscoelastically point-supported rectangular orthotropic plates

The vibration of orthotropic rectangular plates having viscoelastic point supports symmetrically located on its diagonals is analyzed. The plate is under the effect of a sinusoidally varying force at its center. The Lagrange equations are used in the solution process. To apply the Lagrange equations, the trial function denoting the deflection of the plate is expressed in polynomial form. By using the Lagrange equations, the problem is reduced to the solution of a system of algebraic equations. The influence of the mechanical properties, the damping of the supports and the locations of point supports on the steady-state response of the viscoelastically point-supported rectangular plates is investigated numerically for the concentrated load at center for various values of the mechanical properties characterizing the anisotropy of the plate material and for various values of damping and location of the supports for a certain stiffness value of the supports. The results are given for the considered frequency range of the external force. Convergence studies are made. The validity of the obtained results is demonstrated by comparing them with other solutions based on the Kirchhoff–Love plate theory.     

Thermal bending analysis of laminated orthotropic plates by the generalized differential quadrature method

The interlaminar stresses in a thin laminated rectangular orthotropic plate with four sides simply supported edges under bending was determined by using the generalized differential quadrature (GDQ) method involving the effects of thermal expansion strain and transverse load. The approximate stress and displacement solutions are obtained under the effects of thermal expansion force and uniform pressure load for eight-layer unidirectional laminates, symmetric cross-ply laminates. Numerical results on the dominant interlaminar stresses and displacement of bending analysis are compared to the Navier solution. The thermal induced forces have significant effect on the bending of plates.