功能梯度压电压磁材料粘结的Ⅲ型裂纹问题

利用奇异积分方程方法研究两个半无限大的功能梯度压电压磁材料粘结,在渗透和非 渗透边界条件下的III型裂纹问题. 首先通过积分变换构造出原问题的形式解，然 后利用边界条件通过积分变换与留数定理得到一组奇异积分方程， 最后利用Gauss-Chebyshev方法进行数值 求解，讨论材料参数、材料非均匀参数以及裂纹几何形状等对裂纹尖端应力 强度因子的影响. 从结果中可以看出，压电压磁复合材料中反平面问题的应力奇异性 形式与一般弹性材料中的反平面问题应力奇异形式相同，但材料梯度参数对功能梯度压电压 磁复合材料中的应力强度因子和电位移强度因子有很大的影响.     

压电材料反平面裂纹自相似扩展分析

通过对耦合的波动方程和方程解耦,用自模拟方法研究了压电材料中反平面裂纹的自相似扩展问题。研究表明：对反平面问题,介质内的耦合场与裂纹扩展速度有关,在裂纹尖端有r^-1/2阶的奇异性;动态应力强度因子与电位称载荷有关,与静态结论不同;电位移强度因子与机械载 荷无关,与静态结果的表达形式一致。     

功能梯度压电/压磁双材料的周期界面裂纹问题

研究反平面载荷作用下压电/压磁双材料的周期界面裂纹问题,压电/压磁双材料由有限厚度的功能梯度压电层和功能梯度压磁层粘结而成.为便于分析,假设压电层和压磁层的材料性质沿着裂纹的法线方向呈指数变化,基于分离变量和Hilbert核奇异积分方程方法,获得应力强度因子的数值解.数值算例讨论层厚、周期带长度、梯度参数以及材料参数变动等对应力强度因子的影响.结果发现层厚以及裂纹间距的增大会降低裂纹尖端应力强度因子,梯度参数的改变对应力强度因子也有显著的影响.材料参数变动的讨论发现弹性参数的变动对应力强度因子影响最大,其次为电参数,磁参数的变动对应力强度因子影响最小.     

周期张开型平行裂纹问题研究

研究无限介质中周期平行裂纹问题，利用复应力函数在集中载荷作用点和裂纹尖端 的奇异性分析及双曲函数的周期性质，求得了问题在远场作用均匀载荷时裂纹尖端应力强度 因子的精确闭合形式解，并与已有的数值结果进行了比较. 其结果对于研究多裂纹的干 涉作用以及结构和材料的强度设计具有重要的实用价值.     

有限尺寸下双材料界面附近裂纹位置对裂纹尖端的影响

随着复合材料的应用和发展,不同材料组成的界面结构越来越受到人们的重视。界面层两侧材料的性能相异会引起材料界面端奇异性,同时界面和界面附近存在裂纹会引起裂尖处的应力奇异性。因此双材料界面附近的力学分析是比较复杂的。本文建立双材料直角界面模型,在材料界面附近预设初始裂纹,计算了有限材料尺寸对界面应力场及其附近裂纹应力强度因子的影响。运用弹性力学中的 Goursat 公式求得直角界面端在有限尺寸下的应力场以及其应力强度系数。通过叠加原理和格林函数法进一步得到在直角界面端附近的裂纹尖端应力强度因子。计算结果表明,在适当范围内改变材料内裂纹与界面之间的距离,界面附近裂纹尖端的应力强度因子随着裂纹与界面距离的增加而减少,并且逐渐趋于稳定。分析结果可以为预测双材料结构复合材料界面失效位置提供参考。     

压电陶瓷中圆币形裂纹在横向剪力下的机—电耦合行为

以弹性位移分量和电热函数基本未知量时，横观各向同性压电介质三维问题的场方程可化为四个联立的二阶线性偏微分方程组，本文导出了用四个调和函数表示位移分量及电势函数的表达式，即得到了该场方程的势函数能通解，作为通解的应用举例，文中求解了圆币形裂纹受横向剪切载荷下圆币形裂纹的尖端场及应力、电位移强度因子均具有明显的机－电耦合性质，而应力和电位移分量在裂尖仍具有－１／２的奇异性。     

周期界面裂纹反平面问题的动态应力强度因子

在研究动载荷作用下复合材料层板结构的安全与可靠性问题以及在抗震设计中关于地层裂缝的运动等问题中,都与界面裂纹有关。本文研究了分布于两个半空间之间的周期界面裂纹在反平面剪切波作用下裂纹尖端应力强度因子的动态特性。文中利用有限 Pourier变换,将在一个周期带内的边值问题转化成求解一个带周期性奇异核的积分方程,再借助于Chebyshev 多项式求得问题的级数解,最后分析了应力场在裂纹尖端的奇异性,得到了裂纹尖端动态应力强度因子的计算公式,并通过数值计算给出了应力强度因子随入射波频率变化的特性曲线。     

压电材料平面应力状态的直线裂纹问题一般解

研究了含直线裂纹系的压电材料平面应力问题单个裂纹和双裂纹问题的封闭解答表明，在裂纹尖端，应力、电场强度和电位移有１／２阶的奇异性并与前人结果比较了产生电场奇异性的物理因素     

功能梯度压电板条中电绝缘型运动裂纹的电弹性场

基于三维弹性理论和压电理论，对材料系数按指数函数规律分布的功能梯度压电板条中的反平面运动裂纹问题进行了求解。利用Fourier积分变换方法将电绝缘型运动裂纹问题化为对偶积分方程，并进一步归结为易于求解的第二类Fredholm积分方程。通过渐近分析，获得了裂纹尖端应力、应变、电位移和电场的解析解，给出了裂纹尖端场各个变量的角分布函数，并求得了裂纹尖端场的强度因子，分析了压电材料物性梯度参数、几何尺寸及裂纹运动速度对它们的影响。结果表明，对于电绝缘型裂纹，功能梯度压电板条中运动裂纹尖端附近的各个场变量都具有-1／2阶的奇异性；当裂纹运动速度增大时，裂纹扩展的方向会偏离裂纹面。     

压电陶瓷中圆币形裂纹在横向剪力下的机－电耦合行为

以弹性位移分量和电势函数为基本未知量时，横观各向同性压电介质三维问题的场方程可化为四个联立的二阶线性偏微分方程组，本文导出了用四个调和函数表示位移分量及电势函数的表达式，即得到了该场方程的势函数通解，作为通解的应用举例，文中求解了圆币形裂纹受横向剪切作用的问题，得到了裂尖附近应力场及电位移场的解析表达式，结果表明，在横向剪切载荷下圆币形裂纹的尖端场及应力、电位移强度因子均具有明显的机－电耦合性质，而应力和电位移分量在裂尖仍具有－１／２的奇异性。     

Tuning of non-uniform switch toughening in ferroelectric composites by an electric field

This paper deals with a mode III interfacial crack subject to anti-plane stress and in-plane electric fields. The analysis concentrates on the tuning of fracture toughness from non-uniform ferroelectric-ferroelastic domain switch-ing by an electric field. The electric loading changes the size of the asymmetric switching zone. Employing the weight function method, we obtain the electrically-dependent switch toughening for stationary and quasi-static growing interfacial cracks, respectively. Multi-domain solutions are derived for non-poled and fully-poled ferroelectric composites. Numer-ical results are presented on the electric field tuning of the critical applied stress intensity factor. The research provides ways to optimize fracture properties of ferroelectric compos-ites by altering the electric field.     

Closed-form solutions for two anti-plane collinear cracks in a magnetoelectroelastic layer

In this paper we develop closed form solutions for anti-plane mechanical and in-plane electric and magnetic fields for two collinear cracks in magneto-electro-elastic layer of finite thickness under the conditions of permeable crack faces using integral transform method. The anti-plane mechanical shear or displacement and in-plane electrical and magnetic loading are applied to the top and bottom surfaces of the layer for the two cases considered. Expressions for shear stresses, electric displacements and magnetic inductions in the vicinity of the cracks are derived as well as intensity factors for two cracks in magneto-electro-elastic layer. Numerical results for stress intensity factors and energy release rate are shown graphically.     

General treatment of mode III interfacial crack problems in piezoelectric materials

Summary  The anti-plane problem of N collinear interfacial cracks between dissimilar transversely isotropic piezoelectric media, which are subjected to piecewise uniform out-of-plane mechanical loading combined with in-plane electric loading at infinity, and also a line loading at an arbitrary point, is addressed by using the complex function method. In comparison with other relevant works, the present study has two features: one is that the analysis is based on the permeable crack model, i.e. the cracks are considered as permeable thin slits, and, thus, both the normal component of electric displacement and the tangential component of electric field are assumed to be continuous across these slits. The other feature is that explicit closed-form solutions are given not only in piezoelectric media, but also inside cracks when the media are subjected to the most general loading. It is shown that the singularities of electric displacement and electric field in the media are always dependent on that of stress for the general case of loading, and all the singularities of field variables are independent of the applied uniform electric loads at infinity. For the interfacial cracks the electric field is square-root singular at the crack tips and shows jumps across the interface, while the normal component of the electric field is linearly variable inside the crack, but the tangential component is square-root singular. However, for a homogeneous medium with collinear cracks, the electric field is always nonsingular in the medium while the electric displacement exhibits square-root singularity. Moreover, in this case, the electric field inside any crack is equal to a constant when uniform loads are applied at infinity. Received 22 November 1999; accepted for publication 20 July 2000     

Exact solutions of two semi-infinite collinear cracks in piezoelectric strip

Using the complex variable function method and the conformal mapping technique,the fracture problem of two semi-infinite collinear cracks in a piezoelectric strip is studied under the anti-plane shear stress and the in-plane electric load on the partial crack surface.Analytic solutions of the field intensity factors and the mechanical strain energy release rate are derived under the assumption that the surfaces of the crack are electrically impermeable.The results can be reduced to the well-known solutio...     

Pre-kinking of a moving crack in a magnetoelectroelastic material under in-plane loading

A constant moving crack in a magnetoelectroelastic material under in-plane mechanical, electric and magnetic loading is studied for impermeable crack surface boundary conditions. Fourier transform is employed to reduce the mixed boundary value problem of the crack to dual integral equations, which are solved exactly. Steady-state asymptotic fields near the crack tip are obtained in closed form and the corresponding field intensity factors are expressed explicitly. The crack speed influences the singular field distribution around the crack tip and the effects of electric and magnetic loading on the crack tip fields are discussed. The crack kinking phenomena is investigated using the maximum hoop stress intensity factor criterion. The magnitude of the maximum hoop stress intensity factor tends to increase as the crack speed increases.     

Transient response of a magnetoelectroelastic solid with two collinear dielectric cracks under impacts

Dynamic analysis of two collinear electro-magnetically dielectric cracks in a piezoelectromagnetic material is made under in-plane magneto-electro-mechanical impacts. Generalized semi-permeable crack-face boundary conditions are proposed to simulate realistic opening cracks with dielectric. Ideal boundary conditions of a combination of electrically permeable or impermeable and magnetically permeable or impermeable assumptions are several limiting cases of the semi-permeable dielectric crack. Utilizing the Laplace and Fourier transforms, the mixed initial-boundary-value problem is reduced to solving singular integral equations with Cauchy kernel. Dynamic intensity factors of stress, electric displacement, magnetic induction and crack opening displacement (COD) near the inner and outer crack tips are determined in the Laplace transform domain. Numerical results for a special magnetoelectroelastic solid are calculated to show the influences of the dielectric permittivity and magnetic permeability inside the cracks on the crack-face electric displacement and magnetic induction. By means of a numerical inversion of the Laplace transform, the variations of the normalized intensity factors of stress and COD are discussed against applied magnetoelectric impact loadings and the geometry of the cracks for fully impermeable, vacuum, fully permeable cracks and shown in graphics.     

On the dynamic behaviour of a piezoelectric laminate with multiple interfacial collinear cracks

This paper investigates the dynamic behaviour of a piezoelectric laminate containing multiple interfacial collinear cracks subjected to steady-state electro-mechanical loads. Both the permeable and impermeable boundary conditions are examined and discussed. Based on the use of integral transform techniques, the problem is reduced to a set of singular integral equations, which can be solved using Chebyshev polynomial expansions. Numerical results are provided to show the effect of the geometry of interacting collinear cracks, the applied electric fields, the electric boundary conditions along the crack faces and the loading frequency on the resulting dynamic stress intensity and electric displacement intensity factors.     

MULTIPLE PARALLEL SYMMETRIC PERMEABLE MODEL-Ⅲ CRACKS IN A PIEZOELECTRIC/PIEZOMAGNETIC COMPOSITE MATERIAL PLANE

In this paper, the interactions of multiple parallel symmetric and permeable finite length cracks in a piezoelectric/piezomagnetic material plane subjected to anti-plane shear stress loading are studied by the Schmidt method.The problem is formulated through Fourier transform into dual integral equations, in which the unknown variables are the displacement jumps across the crack surfaces.To solve the dual integral equations, the displacement jumps across the crack surfaces are directly expanded as a series of Jacobi polynomials.Finally, the relation between the electric field, the magnetic flux field and the stress field near the crack tips is obtained.The results show that the stress, the electric displacement and the magnetic flux intensity factors at the crack tips depend on the length and spacing of the cracks.It is also revealed that the crack shielding effect presents in piezoelectric/piezomagnetic materials.     

The dynamic behavior of two collinear interface cracks in magneto-electro-elastic materials

In this paper, the dynamic behavior of two collinear symmetric interface cracks between two dissimilar magneto-electro-elastic material half planes under the harmonic anti-plane shear waves loading is investigated by Schmidt method. By using the Fourier transform, the problem can be solved with a set of triple integral equations in which the unknown variable is the jump of the displacements across the crack surfaces. To solve the triple integral equations, the jump of the displacements across the crack surface is expanded in a series of Jacobi polynomials. Numerical solutions of the stress intensity factor, the electric displacement intensity factor and the magnetic flux intensity factor are given. The relations among the electric filed, the magnetic flux field and the stress field are obtained.     

Interaction between collinear periodic cracks in an infinite piezoelectric body

The problem of collinear periodic cracks in an infinite piezoelectric body is studied. Effect of saturation strips at the crack-tips is taken into account. By means of the Stroh formalism and the conformal mapping technique, the general periodic solutions for collinear cracks are obtained. The stress intensity factors and the size of saturation strips are derived analytically, and their dependencies on the ratio of the periodicity on the half-length of the crack are analyzed in detail. Numerical results show the following two facts. (1) When h/l>4.0, the stress intensity factors become almost identical to those of a single crack in an infinite piezoelectric body. This indicates that the interaction between cracks can be ignored in establishing the criterion for the crack initiation in this case. (2) The speed of the saturation strip size of periodic cracks approaching that of a single crack depends on the electric load applied at infinity. In general, a large electric load at infinity is associated with a slow approaching speed.