Facile Ar-CF3 bond formation at Pd. Strikingly different outcomes of reductive elimination from [(Ph3P)2Pd(CF3)Ph] and [(Xantphos)Pd(CF3)Ph

Facile and highly selective perfluoroalkyl-aryl reductive elimination from a metal center (Pd) has been demonstrated for the first time. At temperatures as low as 50-80 degrees C, [(Xantphos)Pd(Ph)CF3] undergoes remarkably clean decomposition to produce CF3Ph in high yield and selectivity. In contrast, analogous trifluoromethylpalladium aryls stabilized by rigid cis-chelating ligands such as dppe are completely unreactive at temperatures up to 130-140 degrees C. Decomposition of [(Ph3P)2Pd(Ph)CF3] in the presence of PhI in benzene at 60 degrees C does not produce PhCF3 but rather leads to [(Ph3P)2Pd(Ph)I] and [Ph4P]+[(Ph3P)Pd(CF3)3]- in a 2:1 ratio with high selectivity.     

Synthesis and structural characterisation of group 10 metal(II) gallyl complexes: analogies with platinum diboration catalysts?

Reactions of the anionic gallium(i) heterocycle, [:Ga{[N(Ar)C(H)](2)}](-) (Ar = C(6)H(3)Pr(i)(2)-2,6), with a variety of mono- and bidentate phosphine, tmeda and 1,5-cyclooctadiene (COD) complexes of group 10 metal dichlorides are reported. In most cases, salt elimination occurs, affording either mono(gallyl) complexes, trans-[MCl{Ga{[N(Ar)C(H)](2)}}(PEt(3))(2)] (M = Ni or Pd) and cis-[PtCl{Ga{[N(Ar)C(H)](2)}}(L)] (L = R(2)PCH(2)CH(2)PR(2), R = Ph (dppe) or cyclohexyl (dcpe)), or bis(gallyl) complexes, trans-[M{Ga{[N(Ar)C(H)](2)}}(2)(PEt(3))(2)] (M = Ni, Pd or Pt), cis-[Pt{Ga{[N(Ar)C(H)](2)}}(2)(PEt(3))(2)], cis-[M{Ga{[N(Ar)C(H)](2)}}(2)(L)] (M = Ni, Pd or Pt; L = dppe, Ph(2)CH(2)PPh(2) (dppm), tmeda or COD). The crystallographic and spectroscopic data for the complexes show that the trans-influence of the gallium(i) heterocycle lies in the series, B(OR)(2) > H(-) > PR(3) approximately [:Ga{[N(Ar)C(H)](2)}](-) > Cl(-). Comparisons between the reactivity of one complex, [Pt{Ga{[N(Ar)C(H)](2)}}(2)(dppe)], with that of closely related platinum bis(boryl) complexes indicate that the gallyl complex is not effective for the catalytic or stoichiometric gallylation of alkenes or alkynes. The phosphaalkyne, Bu(t)C[triple bond, length as m-dash]P, does, however, insert into one gallyl ligand of the complex, leading to the novel, crystallographically characterised P,N-gallyl complex, [Pt{Ga{[N(Ar)C(H)](2)}}{Ga{PC(Bu(t))C(H)[N(Ar)]C(H)N(Ar)}}(dppe)]. An investigation into the mechanism of this insertion reaction has been undertaken.     

Group 11 complexes containing the [C5(CN)5]- ligand; 'coordination-analogues' of molecular organometallic systems

The reactions of Na[C(5)(CN)(5)] (Na[1]) with group 11 phosphine complexes [(P)(n)MCl] (M = Cu, Ag, Au, P = Ph(3)P; M = Cu, P = dppe (Ph(2)PCH(2)CH(2)PPh(2))] give a range of compounds containing the pentacyanocyclopentadienide ligand, [C(5)(CN)(5)](-) (1). The new complexes [(Ph(3)P)(2)M{1}](2) [M = Cu (3); M = Ag (5)], [(Ph(3)P)(3)Ag{1}] (4), [(dppe)(3)Cu(2){1}(2)] (6) and [Au(PPh(3))(2)][1] (7) include the first complete series of group 11 complexes of any cyclopentadienide ligand to be structurally characterised.     

Steric and electronic effects on the reactivity of rh and ir complexes containing P-S,P-P,and P-O ligands. Implications for the effects of chelate ligands in catalysis

Kinetic studies of the reactions of [M(CO)(L-L)I] [M = Rh, Ir; L-L = Ph(2)PCH(2)P(S)Ph(2) (dppms), Ph(2)PCH(2)CH(2)PPh(2) (dppe), and Ph(2)PCH(2)P(O)Ph(2) (dppmo)] with methyl iodide have been undertaken. All the chelate ligands promote oxidative addition of methyl iodide to the square planar M(I) centers, by factors of between 30 and 50 compared to the respective [M(CO)(2)I(2)](-) complexes, due to their good donor properties. Migratory CO insertion in [Rh(CO)(L-L)I(2)Me] leads to acetyl complexes [Rh(L-L)I(2)(COMe)] for which X-ray crystal structures were obtained for L-L = dppms (3a) and dppe (3b). Against the expectations of simple bonding arguments, methyl migration is faster by a factor of ca. 1500 for [Rh(CO)(dppms)I(2)Me] (2a) than for [Rh(CO)(dppe)I(2)Me] (2b). For M = Ir, alkyl iodide oxidative addition gives stable alkyl complexes [Ir(CO)(L-L)I(2)R]. Migratory insertion (induced at high temperature by CO pressure) was faster for [Ir(CO)(dppms)I(2)Me] (5a) than for its dppe analogue (5b). Reaction of methyl triflate with [Ir(CO)(dppms)I] (4a) yielded the dimer [[Ir(CO)(dppms)(mu-I)Me](2)](2+) (7), which was characterized crystallographically along with 5a and [Ir(CO)(dppms)I(2)Et] (6). Analysis of the X-ray crystal structures showed that the dppms ligand adopts a conformation which creates a sterically crowded pocket around the alkyl ligands of 5a, 6, and 7. It is proposed that this steric strain can be relieved by migratory insertion, to give a five-coordinate acetyl product in which the sterically crowded quadrants flank a vacant coordination site, exemplified by the crystal structure of 3a. Conformational analysis indicates similarity between M(dppms) and M(2)(mu-dppm) chelate structures, which have less flexibility than M(dppe) systems and therefore generate greater steric strain with the "axial" ligands in octahedral complexes. Ab initio calculations suggest an additional electronic contribution to the migratory insertion barrier, whereby a sulfur atom trans to CO stabilizes the transition state compared to systems with phosphorus trans to CO. The results represent a rare example of the quantification of ligand effects on individual steps from catalytic cycles, and are discussed in the context of catalytic methanol carbonylation. Implications for other catalytic reactions utilizing chelating diphosphines (e.g., CO/alkene copolymerization and alkene hydroformylation) are considered.     

Generation of [(IPr)Pd(PR2Cl)] complexes via P-Cl reductive elimination

Treatment of [(IPr)Pd(Cl)(2)(PR(2)H)] (IPr = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene; R = Cy, tBu, or 1-Ad) with NaN(SiMe(3))(2) generated isolable [(IPr)Pd(PR(2)Cl)] complexes (68-75%) that have been crystallographically characterized. The formation of these mixed-ligand Pd(0) species in this manner corresponds to an unusual net dehydrohalogenation/P-Cl reductive elimination sequence.     

Synthesis, structures, and properties of group 9- and group 10-group 6 heterodinuclear nitrosyl complexes

The reaction of the group 9 bis(hydrosulfido) complexes [Cp*M(SH)2(PMe3)] (M=Rh, Ir; Cp*=eta(5)-C 5Me5) with the group 6 nitrosyl complexes [Cp*M'Cl2(NO)] (M'=Mo, W) in the presence of NEt3 affords a series of bis(sulfido)-bridged early-late heterobimetallic (ELHB) complexes [Cp*M(PMe3)(mu-S)2M'(NO)Cp*] (2a, M=Rh, M'=Mo; 2b, M=Rh, M'=W; 3a, M=Ir, M'=Mo; 3b, M=Ir, M'=W). Similar reactions of the group 10 bis(hydrosulfido) complexes [M(SH)2(dppe)] (M=Pd, Pt; dppe=Ph 2P(CH2) 2PPh2), [Pt(SH)2(dppp)] (dppp=Ph2P(CH2) 3PPh2), and [M(SH)2(dpmb)] (dpmb=o-C6H4(CH2PPh2)2) give the group 10-group 6 ELHB complexes [(dppe)M(mu-S)2M'(NO)Cp*] (M=Pd, Pt; M'=Mo, W), [(dppp)Pt(mu-S)2M'(NO)Cp*] (6a, M'=Mo; 6b, M'=W), and [(dpmb)M(mu-S)2M'(NO)Cp*] (M=Pd, Pt; M'=Mo, W), respectively. Cyclic voltammetric measurements reveal that these ELHB complexes undergo reversible one-electron oxidation at the group 6 metal center, which is consistent with isolation of the single-electron oxidation products [Cp*M(PMe3)(mu-S)2M'(NO)Cp*][PF6] (M=Rh, Ir; M'=Mo, W). Upon treatment of 2b and 3b with ROTf (R=Me, Et; OTf=OSO 2CF 3), the O atom of the terminal nitrosyl ligand is readily alkylated to form the alkoxyimido complexes such as [Cp*Rh(PMe3)(mu-S)2W(NOMe)Cp*][OTf]. In contrast, methylation of the Rh-, Ir-, and Pt-Mo complexes 2a, 3a, and 6a results in S-methylation, giving the methanethiolato complexes [Cp*M(PMe3)(mu-SMe)(mu-S)Mo(NO)Cp*][BPh 4] (M=Rh, Ir) and [(dppp)Pt(mu-SMe)(mu-S)Mo(NO)Cp*][OTf], respectively. The Pt-W complex 6b undergoes either S- or O-methylation to form a mixture of [(dppp)Pt(mu-SMe)(mu-S)W(NO)Cp*][OTf] and [(dppp)Pt(mu-S) 2W(NOMe)Cp*][OTf]. These observations indicate that O-alkylation and one-electron oxidation of the dinuclear nitrosyl complexes are facilitated by a common effect, i.e., donation of electrons from the group 9 or 10 metal center, where the group 9 metals behave as the more effective electron donor.     

Utilization of CS2 as a source of C1 chemistry for the generation of methyldithioformate

Insertion of CS(2) into the Ru-H bond of cis-[(dppe)(2)Ru(H)(2)] takes place to afford the hydride dithioformate complex trans-[(dppe)(2)Ru(H)(SC(S)H)]. The hydride dithioformate complex reacts under very mild conditions with MeX (X = OTf, I) to give the hydride methyldithioformate derivative trans-[(dppe)(2)Ru(H)(SC(SMe)H)][X]. Three different pathways have been found to cleave off the ester moiety from the metal complex. A method to recover the ruthenium starting material upon elimination of the methyldithioformate is presented. This is a novel case of C(1) chemistry using carbon disulfide.     

Directly observed reductive elimination of aryl halides from monomeric arylpalladium(II) halide complexes

Monomeric, three-coordinate arylpalladium(II) halide complexes undergo reductive elimination of aryl halide to form free haloarene and Pd(0). Reductive elimination of aryl chlorides, bromides, and iodides were observed upon the addition of P(t-Bu)3 to Pd[P(t-Bu)3](Ar)(X) (X = Cl, Br, I). Conditions to observe the equilibrium between reductive elimination and oxidative addition were established with five haloarenes. Reductive elimination of aryl chloride was most favored thermodynamically, and elimination of aryl iodide was the least favored. However, reductive elimination from the aryl chloride complex was the slowest, and reductive elimination from the aryl bromide complex was the fastest. These data show that the electronic properties of the halide, not the thermodynamic driving force for the addition of elimination reaction, control the rates for addition and elimination of haloarenes. Mechanistic data suggest that reversible reductive elimination of aryl bromide to form Pd[P(t-Bu)3] and free aryl bromide is followed by rate-limiting coordination of P(t-Bu)3 to form Pd[P(t-Bu)3]2.     

Chiral fluorous dialkoxy-diamino zirconium complexes: synthesis and use in stereospecific polymerization of 1-hexene

New catalysts for the isospecific polymerization of 1-hexene based on cationic zirconium complexes incorporating the tetradentate fluorous dialkoxy-diamino ligands [OC(CF(3))(2)CH(2)N(Me)(CH(2))(2)N(Me)CH(2)C(CF(3))(2)O](2-) [(ON(2)NO)(2-)] and [OC(CF(3))(2)CH(2)N(Me)(1R,2R-C(6)H(10))N(Me)CH(2)C(CF(3))(2)O](2-) [(ON(Cy)NO)(2-)] have been developed. The chiral fluorous diamino-diol [(ON(Cy)NO)H(2), 2] was prepared by ring-opening of the fluorinated oxirane (CF(3))(2)COCH(2) with (R,R)-N,N'-dimethyl-1,2-cyclohexanediamine. Proligand 2 reacts cleanly with [Zr(CH(2)Ph)(4)] and [Ti(OiPr)(4)] precursors to give the corresponding dialkoxy complexes [Zr(CH(2)Ph)(2)(ON(Cy)NO)] (3) and [Ti(OiPr)(2)(ON(Cy)NO)] (4), respectively. An X-ray diffraction study revealed that 3 crystallizes as a 1:1 mixture of two diastereomers (Lambda-3 and Delta-3), both of which adopt a distorted octahedral structure with trans-O, cis-N, and cis-CH(2)Ph ligands. The two diastereomers Lambda-3 and Delta-3 adopt a C(2)-symmetric structure in toluene solution, as established by NMR spectroscopy. Cationic complexes [Zr(CH(2)Ph)(ON(2)NO)(THF)(n)](+) (n=0, anion=[B(C(6)F(5))(4)](-), 5; n=1, anion=[PhCH(2)B(C(6)F(5))(3)](-), 6) and [Zr(CH(2)Ph)(ON(Cy)NO)(THF)](+)[PhCH(2)B(C(6)F(5))(3)](-) (7) were generated from the neutral parent precursors [Zr(CH(2)Ph)(2)(ON(2)NO)] (H) and [Zr(CH(2)Ph)(2)(ON(Cy)NO)] (3), and their possible structures were determined on the basis of (1)H, (19)F, and (13)C NMR spectroscopy and DFT methods. The neutral zirconium complexes H and 3 (Lambda-3/Delta-3 mixture), when activated with B(C(6)F(5))(3) or [Ph(3)C](+)[B(C(6)F(5))(4)](-), catalyze the polymerization of 1-hexene with overall activities of up to 4500 kg PH mol Zr(-1) h(-1), to yield isotactic-enriched (up to 74 % mmmm) polymers with low-to-moderate molecular weights (M(w)=4800-47 200) and monodisperse molecular-weight distributions (M(w)/M(n)=1.17-1.79).     

Intermolecular alkene and alkyne hydroacylation with beta-S-substituted aldehydes: mechanistic insight into the role of a hemilabile P-O-P ligand

A straightforward to assemble catalytic system for the intermolecular hydroacylation reaction of beta-S-substituted aldehydes with activated and unactivated alkenes and alkynes is reported. These catalysts promote the hydroacylation reaction between beta-S-substituted aldehydes and challenging substrates, such as internal alkynes and 1-octene. The catalysts are based upon [Rh(cod)(DPEphos)][ClO(4)] (DPEphos=bis(2-diphenylphosphinophenyl)ether, cod=cyclooctadiene) and were designed to make use of the hemilabile capabilities of the DPEphos ligand to stabilise key acyl-hydrido intermediates against reductive decarbonylation, which results in catalyst death. Studies on the stoichiometric addition of aldehyde (either ortho-HCOCH(2)CH(2)SMe or ortho-HCOC(6)H(4)SMe) and methylacrylate to precursor acetone complexes [Rh(acetone)(2)(DPEphos)][X] [X=closo-CB(11)H(6)Cl(6) or [BAr(F) (4)] (Ar(F)=3,5-(CF(3))(2)C(6)H(3))] reveal the role of the hemilabile DPEphos ligand. The crystal structure of [Rh(acetone)(2)(DPEphos)][X] shows a cis-coordinated diphosphine ligand with the oxygen atom of the DPEphos distal from the rhodium. Addition of aldehyde forms the acyl hydride complexes [Rh(DPEphos)(COCH(2)CH(2)SMe)H][X] or [Rh(DPEphos)(COC(6)H(4)SMe)H][X], which have a trans-spanning DPEphos ligand and a coordinated ether group. Compared to analogous complexes prepared with dppe (dppe=1,2-bis(diphenylphosphino)ethane), these DPEphos complexes show significantly increased resistance towards reductive decarbonylation. The crystal structure of the reductive decarbonylation product [Rh(CO)(DPEphos)(EtSMe)][closo-CB(11)H(6)I(6)] is reported. Addition of alkene (methylacrylate) to the acyl-hydrido complexes forms the final complexes [Rh(DPEphos)(eta(1)-MeSC(2)H(4)-eta(1)-COC(2)H(4)CO(2)Me)][X] and [Rh(DPEphos)(eta(1)-MeSC(6)H(4)-eta(1)-COC(2)H(4)CO(2)Me)][X], which have been identified spectroscopically and by ESIMS/MS. Intermediate species in this transformation have been observed and tentatively characterised as the alkyl-acyl complexes [Rh(CH(2)CH(2)CO(2)Me)(COC(2)H(4)SMe)(DPEphos)][X] and [Rh(CH(2)CH(2)CO(2)Me)(COC(6)H(4)SMe)(DPEphos)][X]. In these complexes, the DPEphos ligand is now cis chelating. A model for the (unobserved) transient alkene complex that would result from addition of alkene to the acyl-hydrido complexes comes from formation of the MeCN adducts [Rh(DPEphos)(MeSC(2)H(4)CO)H(MeCN)][X] and [Rh(DPEphos)(MeSC(6)H(4)CO)H(MeCN)][X]. Changing the ligand from DPEphos to one with a CH(2) linkage, [Ph(2)P(C(6)H(4))](2)CH(2), gave only decomposition on addition of aldehyde to the acetone precursor, which demonstrated the importance of the hemiabile ether group in DPEphos. With [Ph(2)P(C(6)H(4))](2)S, the sulfur atom has the opposite effect and binds too strongly to the metal centre to allow access to productive acetone intermediates.     

A series of dinuclear homo- and heterometallic complexes with two or three bridging sulfido ligands derived from the tungsten tris(sulfido) complex [Et(4)N][(Me(2)Tp)WS(3)] (Me(2)Tp = hydridotris(3,5-dimethylpyrazol-1-yl)borate)

The generation of heterobimetallic complexes with two or three bridging sulfido ligands from mononuclear tris(sulfido) complex of tungsten [Et(4)N][(Me(2)Tp)WS(3)] (1; Me(2)Tp = hydridotris(3,5-dimethylpyrazol-1-yl)borate) and organometallic precursors is reported. Treatment of 1 with stoichiometric amounts of metal complexes such as [M(PPh(3))(4)] (M = Pt, Pd), [(PtMe(3))(4)(micro(3)-I)(4)], [M(cod)(PPh(3))(2)][PF(6)] (M = Ir, Rh; cod = 1,5-cyclooctadiene), [Rh(cod)(dppe)][PF(6)] (dppe = Ph(2)PCH(2)CH(2)PPh(2)), [CpIr(MeCN)(3)][PF(6)](2) (Cp = eta(5)-C(5)Me(5)), [CpRu(MeCN)(3)][PF(6)], and [M(CO)(3)(MeCN)(3)] (M = Mo, W) in MeCN or MeCN-THF at room temperature afforded either the doubly bridged complexes [Et(4)N][(Me(2)Tp)W(=S)(micro-S)(2)M(PPh(3))] (M = Pt (3), Pd (4)), [(Me(2)Tp)W(=S)(micro-S)(2)M(cod)] (M = Ir, Rh (7)), [(Me(2)Tp)W(=S)(micro-S)(2)Rh(dppe)], [(Me(2)Tp)W(=S)(micro-S)(2)RuCp] (10), and [Et(4)N][(Me(2)Tp)W(=S)(micro-S)(2)W(CO)(3)] (12) or the triply bridged complexes including [(Me(2)Tp)W(micro-S)(3)PtMe(3)] (5), [(Me(2)Tp)W(micro-S)(3)IrCp][PF(6)] (9), and [Et(4)N][(Me(2)Tp)W(micro-S)(3)Mo(CO)(3)] (11), depending on the nature of the incorporated metal fragment. The X-ray analyses have been undertaken to clarify the detailed structures of 3-5, 7, and 9-12.     

Behavior of neutral phosphido derivatives of platinum and palladium toward silver centers

The reaction of the neutral binuclear complexes [(R(F))(2)Pt(μ-PPh(2))(2)M(phen)] (phen = 1,10-phenanthroline, R(F) = C(6)F(5); M = Pt, 1; M = Pd, 2) with AgClO(4) or [Ag(OClO(3))(PPh(3))] affords the trinuclear complexes [AgPt(2)(μ-PPh(2))(2)(R(F))(2)(phen)(OClO(3))] (7a) or [AgPtM(μ-PPh(2))(2)(R(F))(2)(phen)(PPh(3))][ClO(4)] (M = Pt, 8; M = Pd, 9), which display an "open-book" type structure and two (7a) or one (8, 9) Pt-Ag bonds. The neutral diphosphine complexes [(R(F))(2)Pt(μ-PPh(2))(2)M(P-P)] (P-P = 1,2-bis(diphenylphosphino)methane, dppm, M = Pt, 3; M = Pd, 4; P-P = 1,2-bis(diphenylphosphino)ethane, dppe, M = Pt, 5; M = Pd, 6) react with AgClO(4) or [Ag(OClO(3))(PPh(3))], and the nature of the resulting complexes is dependent on both M and the diphosphine. The dppm Pt-Pt complex 3 reacts with [Ag(OClO(3))(PPh(3))], affording a silver adduct 10 in which the Ag atom interacts with the Pt atoms, while the dppm Pt-Pd complex 4 reacts with [Ag(OClO(3))(PPh(3))], forming a 1:1 mixture of [AgPdPt(μ-PPh(2))(2)(R(F))(2)(OClO(3))(dppm)] (11), in which the silver atom is connected to the Pt-Pd moiety through Pd-(μ-PPh(2))-Ag and Ag-P(k(1)-dppm) interactions, and [AgPdPt(μ-PPh(2))(2)(R(F))(2)(OClO(3))(PPh(3))(2)][ClO(4)] (12). The reaction of complex 4 with AgClO(4) gives the trinuclear derivative 11 as the only product. Complex 11 shows a dynamic process in solution in which the silver atom interacts alternatively with both Pd-μPPh(2) bonds. When P-P is dppe, both complexes 5 and 6 react with AgClO(4) or [Ag(OClO(3))(PPh(3))], forming the saturated complexes [(PPh(2)C(6)F(5))(R(F))Pt(μ-PPh(2))(μ-OH)M(dppe)][ClO(4)] (M = Pt, 13; Pd, 14), which are the result of an oxidation followed by a PPh(2)/C(6)F(5) reductive coupling. Finally, the oxidation of trinuclear derivatives [(R(F))(2)Pt(II)(μ-PPh(2))(2)Pt(II)(μ-PPh(2))(2)Pt(II)L(2)] (L(2) = phen, 15; L = PPh(3), 16) by AgClO(4) results in the formation of the unsaturated 46 VEC complexes [(R(F))(2)Pt(III)(μ-PPh(2))(2)Pt(III)(μ-PPh(2))(2)Pt(II)L(2)][ClO(4)](2) (17 and 18, respectively) which display Pt(III)-Pt(III) bonds.     

Palladium-catalyzed asymmetric phosphination. Scope, mechanism, and origin of enantioselectivity

Asymmetric cross-coupling of aryl iodides (ArI) with secondary arylphosphines (PHMe(Ar'), Ar' = (2,4,6)-R3C6H2; R = i-Pr (Is), Me (Mes), Ph (Phes)) in the presence of the base NaOSiMe3 and a chiral Pd catalyst precursor, such as Pd((R,R)-Me-Duphos)(trans-stilbene), gave the tertiary phosphines PMe(Ar')(Ar) in enantioenriched form. Sterically demanding secondary phosphine substituents (Ar') and aryl iodides with electron-donating para substituents resulted in the highest enantiomeric excess, up to 88%. Phosphination of ortho-substituted aryl iodides required a Pd(Et-FerroTANE) catalyst but gave low enantioselectivity. Observations during catalysis and stoichiometric studies of the individual steps suggested a mechanism for the cross-coupling of PhI and PHMe(Is) (1) initiated by oxidative addition to Pd(0) yielding Pd((R,R)-Me-Duphos)(Ph)(I) (3). Reversible displacement of iodide by PHMe(Is) gave the cation [Pd((R,R)-Me-Duphos)(Ph)(PHMe(Is))][I] (4), which was isolated as the triflate salt and crystallographically characterized. Deprotonation of 4-OTf with NaOSiMe3 gave the phosphido complex Pd((R,R)-Me-Duphos)(Ph)(PMeIs) (5); an equilibrium between its diastereomers was observed by low-temperature NMR spectroscopy. Reductive elimination of 5 yielded different products depending on the conditions. In the absence of a trap, the unstable three-coordinate phosphine complex Pd((R,R)-Me-Duphos)(PMeIs(Ph)) (6) was formed. Decomposition of 5 in the presence of PhI gave PMeIs(Ph) (2) and regenerated 3, while trapping with phosphine 1 during catalysis gave Pd((R,R)-Me-Duphos)(PHMe(Is))2 (7), which reacted with PhI to give 3. Deprotonation of 1:1 or 1.4:1 mixtures of cations 4-OTf gave the same 6:1 ratio of enantiomers of PMeIs(Ph) (2), suggesting that the rate of P inversion in 5 was greater than or equal to the rate of reductive elimination. Kinetic studies of the first-order reductive elimination of 5 were consistent with a Curtin-Hammett-Winstein-Holness (CHWH) scheme, in which pyramidal inversion at the phosphido ligand was much faster than P-C bond formation. The absolute configuration of the phosphine (SP)-PMeIs(p-MeOC6H4) was determined crystallographically; NMR studies and comparison to the stable complex 5-Pt were consistent with an RP-phosphido ligand in the major diastereomer of the intermediate Pd((R,R)-Me-Duphos)(Ph)(PMeIs) (5). Therefore, the favored enantiomer of phosphine 2 appeared to be formed from the major diastereomer of phosphido intermediate 5, although the minor intermediate diastereomer underwent P-C bond formation about three times more rapidly. The effects of the diphosphine ligand, the phosphido substituents, and the aryl group on the ratio of diastereomers of the phosphido intermediates Pd(diphos*)(Ar)(PMeAr'), their rates of reductive elimination, and the formation of three-coordinate complexes were probed by low-temperature 31P NMR spectroscopy; the results were also consistent with the CHWH scheme.     

Distinct electronic effects on reductive eliminations of symmetrical and unsymmetrical bis-aryl platinum complexes

Symmetrical bis-aryl platinum complexes (DPPF)Pt(C(6)H(4)-4-R)(2) (R = NMe(2), OMe, CH(3), H, Cl, CF(3)) and electronically unsymmetrical bis-aryl platinum complexes (DPPF)Pt(C(6)H(4)-4-R)(C(6)H(4)-4-X) (R = CH(3), X = NMe(2), OMe, H, Cl, F, CF(3); R = OMe, X = NMe(2), H, Cl, F, CF(3); R = CF(3), X = H, Cl, NMe(2); and R = NMe(2), X = H, Cl) were prepared, and the rates of reductive elimination of these complexes in the presence of excess PPh(3) are reported. The platinum complexes reductively eliminated biaryl compounds in quantitative yields with first-order rate constants that were independent of the concentration of PPh(3). Plots of Log(k(obs)/k(obs(H))) vs Hammett substituent constants (sigma) of the para substituents R and X showed that the rates of reductive elimination reactions depended on two different electronic properties. The reductive elimination from symmetrical bis-aryl platinum complexes occurred faster from complexes with more electron-donating para substituents R. However, reductive elimination from a series of electronically unsymmetrical bis-aryl complexes was not faster from complexes with the more electron-donating substituents. Instead, reductive elimination was faster from complexes with a larger difference in the electronic properties of the substituents on the two platinum-bound aryl groups. The two electronic effects can complement or cancel each other. Thus, this combination of electronic effects gives rise to complex, but now more interpretable, free energy relationships for reductive elimination.     

Pyridine-2-thionate as a versatile ligand in Pd(II) and Pt(II) chemistry: the presence of three different co-ordination modes in [Pd2(micro2-S,N-C5H4SN)(micro2-kappa2S-C5H4SN)(micro2-dppm)(S-C5H4SN)2

Reactions of [MCl2(L-L)], M = Pt, Pd; L-L = bis(diphenylphosphino)methane (dppm) or bis(diphenylphosphino)ethane (dppe), with NaC5H4SN in a 1 : 2 molar ratio lead to mononuclear species [M(S-C5H4SN)2(P-P)], M = Pt; L-L = dppm (1) or dppe (2) and M = Pd; L-L = dppe (3), as well as to the dinuclear [Pd2(micro2-S,N-C5H4SN)(micro2-kappa2S-C5H4SN)(micro2-dppm)(S-C5H4SN)2] (4). In contrast, reaction of [MCl2(dppm)] with NaC5H4SN in a 1 : 1 molar ratio leads to [Pd2(micro2-S,N-C5H4SN)3(micro2-dppm)]Cl (5) and trans-[Pt(S-C5H4SN)2(PPh2Me)2] (6) respectively. The latter is formed in low yield by cleavage of the dppm ligand. The dinuclear derivatives 4 and 5 present an A-frame and lantern structure, respectively. The former showing three different co-ordination modes in the same molecule with a short Pd-Pd distance of 2.9583 (9) A and the latter with three bridging S,N thionate ligands showing a shorter Pd-Pd distance of 2.7291 (13) A. Both distances could be imposed by the bridging ligands or point to some sort of metal-metal interaction.     

Providing support in favor of the existence of a Pd(II)/Pd(IV) catalytic cycle in a Heck-type reaction

The complex [Pd(O,N,C-L)(OAc)], in which L is a monoanionic pincer ligand derived from 2,6-diacetylpyridine, reacts with 2-iodobenzoic acid at room temperature to afford the very stable pair of Pd(IV) complexes (OC-6-54)- and (OC-6-26)-[Pd(O,N,C-L)(O,C-C(6)H(4)CO(2)-2)I] (1.5:1 molar ratio, at -55?°C). These complexes and the Pd(II) species [Pd(O,N,C-L)(OX)] and [Pd(O,N,C-L')(NCMe)]ClO(4), (X = MeC(O) or ClO(3), L' = another monoanionic pincer ligand derived from 2,6-diacetylpyridine), are precatalysts for the arylation of CH(2)=CHR (R = CO(2)Me, CO(2)Et, Ph) using IC(6)H(4)CO(2)H-2 and AgClO(4). These catalytic reactions have been studied and a tentative mechanism is proposed. The presence of two Pd(IV) complexes was detected by ESI(+)-MS during the catalytic process. All the data obtained strongly support a Pd(II)/Pd(IV) catalytic cycle.     

Cyclopropenylidene carbene ligands in palladium catalysed coupling reactions: carbene ligand rotation and application to the Stille reaction

Reaction of [Pd(PPh(3))(4)] with 1,1-dichloro-2,3-diarylcyclopropenes gives complexes of the type cis-[PdCl(2)(PPh(3))(C(3)(Ar)(2))] (Ar = Ph 5, Mes 6). Reaction of [Pd(dba)(2)] with 1,1-dichloro-2,3-diarylcyclopropenes in benzene gave the corresponding binuclear palladium complexes trans-[PdCl(2)(C(3)(Ar)(2))](2) (Ar = Ph 7, p-(OMe)C(6)H(4)8, p-(F)C(6)H(4)9). Alternatively, when the reactions were performed in acetonitrile, the complexes trans-[PdCl(2)(NCMe)(C(3)(Ar)(2))] (Ar = Ph 10, p-(OMe)C(6)H(4)11 and p-(F)C(6)H(4)) 12) were isolated. Addition of phosphine ligands to the binuclear palladium complex 7 or acetonitrile adducts 11 and 12 gave complexes of the type cis-[PdCl(2)(PR(3))(C(3)(Ar)(2))] (Ar = Ph, R = Cy 13, Ar = p-(OMe)C(6)H(4), R = Ph 14, Ar = p-(F)C(6)H(4), R = Ph 15). Crystal structures of complexes 6·3.25CHCl(3), 10, 11·H(2)O and 12-15 are reported. DFT calculations of complexes 10-12 indicate the barrier to rotation about the carbene-palladium bond is very low, suggesting limited double bond character in these species. Complexes 5-9 were tested for catalytic activity in C-C coupling (Mizoroki-Heck, Suzuki-Miyaura and, for the first time, Stille reactions) and C-N coupling (Buchwald-Hartwig amination) showing excellent conversion with moderate to high selectivity.     

Reactions of vinyl acetate and vinyl trifluoroacetate with cationic diimine Pd(II) and Ni(II) alkyl complexes: identification of problems connected with copolymerizations of these monomers with ethylene

Vinyl acetate (VA) and vinyl trifluoroacetate (VA(f)) react with [(NwedgeN)Pd(Me)(L)][X] (M = Pd, Ni, (NwedgeN) = N,N'-1,2-acenaphthylenediylidene bis(2,6-dimethyl aniline), Ar(f) = 3,5-trifluoromethyl phenyl, L = Ar(f)CN, Et2O; X = B(Ar(f))4-, SbF6-) to form pi-adducts 3 and 5 at -40 degrees C. Binding affinities relative to ethylene have been determined. Migratory insertion occurs in a 2,1 fashion (DeltaG++ = 19.4 kcal/mol, 0 degrees C for VA, and 17.4 kcal/mol, -40 degrees C for VA(f)) to yield five-membered chelate complexes [(NwedgeN)Pd(kappa2-CH(Et)(OC(O)-CH3))]+, 4, and [(NwedgeN)Pd(kappa2-CH(Et)(OC(O)CF3))]+, 6. When VA is added to [(NwedgeN)Ni(CH3)]+, an equilibrium mixture of an eta2 olefin complex, 8c, and a kappa-oxygen complex, 8o, results. Insertion occurs from the eta2 olefin complex, 8c (DeltaG++ = 15.5 kcal/mol, -51 degrees C), in both a 2,1 and a 1,2 fashion to generate a mixture of five- and six-membered chelates, 9(2,1) and 9(1,2). VA(f) inserts into the Ni-CH3 bond (-80 degrees C) to form a five-membered chelate with no detectable intermediate. Thermolysis of the Pd chelates results in beta-acetate elimination from 4 (DeltaG++ = 25.5 kcal/mol, 60 degrees C) and beta-trifluoroacetate elimination from 6 (DeltaG = 20.5 kcal/mol, 10 degrees C). The five-membered Ni chelate, 9(2,1), is quite stable at room temperature, but the six-membered chelate, 9(1,2), undergoes beta-elimination at -34 degrees C. Treatment of the OAc(f) containing Pd chelate 6 with ethylene results in complete opening to the pi-complex [(NwedgeN)Pd(kappa2-CH(Et)(OAc(f)))(CH2CH2)]+ (OAc(f) = OC(O)CF3), 18, while reaction of the OAc containing Pd chelate 4 with ethylene establishes an equilibrium between 4 and the open form 16, strongly favoring the closed chelate 4 (DeltaH = -4.1 kcal/mol, DeltaS = -23 eu, K = 0.009 M(-1) at 25 degrees C). The open chelates undergo migratory insertion at much slower rates relative to those of the simple (NwedgeN)Pd(CH3)(CH2CH2)+ analogue. These quantitative studies provide an explanation for the behavior of VA and VA(f) in attempted copolymerizations with ethylene.     

Molecular triangle of palladium(II) and its anion binding properties

The ligand 4(3H)-pyrimidone (Hpm) forms the complexes trans-[PdCl(2)(Hpm)(2)] and [Pd(PP)(Hpm)(2)](CF(3)SO(3))(2) (PP = Ph(2)PCH(2)PPh(2) or Ph(2)P(CH(2))(3)PPh(2)), with the neutral ligand (Hpm), and a bowl-like molecular triangle, [(Pd(bu(2)bipy)(mu-pm))(3)](3+) (bu(2)bipy = 4,4'-di-tert-butyl-2,2'-bipyridine), with the deprotonated ligand (pm). This triangular complex acts as a host for binding of several anionic guests.     

Dinuclear palladium-azido complexes containing thiophene derivatives: reactivity toward organic isocyanides and isothiocyanates

Cyclopalladated tetranuclear Pd(II) complexes, [Pd2(micro-Cl)2(Y)]2 (Y = L1 or L2; H2L1 = di(2-pyridyl)-2,2'-bithiophene; H2L2 = 5,5'-di(2-pyridyl)-2,2':5',2'-terthiophene), containing two pyridyl-alpha, alpha'-disubstituted derivatives of thiophene were prepared. Treating these products with PR3 and subsequently with NaN3 produced the dinuclear Pd-azido complexes [(PR3)2(N3)Pd-Y-Pd(N3)(PR3)2] (Y = L1 or L2) or a cyclometallated complex [(PR3)(N3)Pd-Y'-Pd(N3)(PR3)] (Y' = C,N-L2). Reactions of these Pd-azido complexes with CN-Ar (Ar = 2,6-Me(2)C(6)H(3), 2,6-i-Pr(2)C(6)H(3)) or R-NCS (R = i-Pr, Et, allyl) led to the complexes containing end-on carbodiimido groups [(PMe3)2(N[double bond]C[double bond]N-Ar)Pd-Y-Pd(N[double bond]C[double bond]N-Ar)(PMe3)2] or S-coordinated tetrazole-thiolato groups {(PMe3)2[CN4(R)]S-Pd-Y-Pd-S[CN4)(R)](PMe3)2}. Interestingly, when treated with elemental sulfur, the carbodiimido complexes transformed into the cyclometallated derivatives, [(PMe3)(N[double bond]C[double bond]N-Ar)Pd-Y'-Pd(N[double bond]C[double bond]N-Ar)(PMe3)] (Y' = C,N-L1, C,N-L2). We also report the preparation of linear, thienylene-bridged dinuclear Pd complexes [L2(N3)Pd-X(or X')-Pd(N3)L2] (L = PMe3 or PMe2Ph; H2X = 2,2'-bithiophene or H2X' = 2,2':5',2'-terthiophene) and their reactivity toward organic isocyanide and isothiocyanates.