Catalyst-assisted vapor-liquid-solid growth of single-crystal Ga2O3 nanobelts

Mass production of quasi-one-dimensional gallium oxide nanobelts is accomplished through graphite-thermal reduction of a mixture of gallium oxide powders and SnO2 nanopowders under controlled experimental conditions. Sn nanoparticles are located at or close to the tips of the nanobelts and served as the catalyst for the nanobelt growth by a vapor-liquid-solid mechanism. The morphology and microstructure of the nanobelts were characterized by scanning electron microscopy and high-resolution transmission electron microscopy. The Ga2O3 nanobelts grow along the [104] direction, the widths ranged from several tens to several hundreds of nanometers, and the lengths ranged from several tens to several hundreds of micrometers. The growth of Ga2O3 nanobelts is initiated by Sn nanoparticles via a catalyst-assisted vapor-liquid-solid process, which makes it possible to control the sizes of Ga2O3 nanobelts.     

Formation of well-aligned ZnGa(2)O(4) nanowires from Ga(2)O(3)/ZnO core-shell nanowires via a Ga(2)O(3)/ZnGa(2)O(4) epitaxial relationship

Formation of well-aligned and single-crystalline ZnGa(2)O(4) nanowires on sapphire (0001) substrates has been achieved via annealing of the Ga(2)O(3)/ZnO core-shell nanowires. Ga(2)O(3)/ZnO core-shell nanowires were prepared using a two-step method. The thickness of the original ZnO shell and the thermal budget of the annealing process play crucial roles for preparing single-crystalline ZnGa(2)O(4) nanowires. Structural analyses of the annealed nanowires reveal the existence of an epitaxial relationship between ZnGa(2)O(4) and Ga(2)O(3) phases during the solid-state reaction. A strong CL emission band centered at 360 nm and a small tail at 680 nm are obtained at room temperature from the single-crystalline ZnGa(2)O(4) nanowires.     

Biomimetic and aggregation-driven crystallization route for room-temperature material synthesis: growth of beta-Ga(2)O(3) nanoparticles on peptide assemblies as nanoreactors

The room-temperature synthesis of beta-Ga2O3 nanocrystal was examined by coupling two biomimetic crystallization techniques, enzymatic peptide nanoassembly templating and aggregation-driven crystallization. The catalytic template of peptide assembly nucleated and mineralized primary beta-Ga2O3 crystals and then fused them to grow single-crystalline and monodisperse nanoparticles in the cavity of the peptide assembly at room temperature. In this work, the peptide assembly was exploited as a nanoreactor with an enzymatic functionality catalyzing the hydrolysis of gallium precursors. In addition, the characteristic ring structure of peptide assembly is expected to provide an efficient dehydration pathway and crystallization control over the surface tension, which are advantageous for beta-Ga2O3 crystal growth. This multifunctional peptide assembly could be applied for syntheses of a variety of nanomaterials that are kinetically difficult to grow at room temperature.     

Growth and magnetic properties of oriented alpha-Fe2O3 nanorods

alpha-Fe(2)O(3) nanorods have been deposited on Si substrates using the metal-organic chemical vapor deposition method. Structural analyses indicated that alpha-Fe(2)O(3) nanorods are preferentially oriented in the [104] direction on Si(100) substrates, and the nanorod possesses the single-crystalline structure. MFM image suggests that a spin domain is formed in the alpha-Fe(2)O(3) nanorod. Anisotropic magnetic property of the alpha-Fe(2)O(3) nanorods, i.e., the discrepancy of the saturation magnetization, is observed from SQUID measurements when the magnetic field are applied parallel and perpendicular to the substrate. A lower Morin temperature than that of the macroscopically crystalline hematite is observed when the magnetic field is applied parallel to the substrate.     

PLD-assisted VLS growth of aligned ferrite nanorods, nanowires, and nanobelts-synthesis, and properties

We report here a systematic synthesis and characterization of aligned alpha-Fe2O3 (hematite), epsilon-Fe2O3, and Fe3O4 (magnetite) nanorods, nanobelts, and nanowires on alumina substrates using a pulsed laser deposition (PLD) method. The presence of spherical gold catalyst particles at the tips of the nanostructures indicates selective growth via the vapor-liquid-solid (VLS) mechanism. Through a series of experiments, we have produced a primitive "phase diagram" for growing these structures based on several designed pressure and temperature parameters. Transmission electron microscopy (TEM) analysis has shown that the rods, wires, and belts are single-crystalline and grow along <111>m or <110>h directions. X-ray diffraction (XRD) measurements confirm phase and structural analysis. Superconducting quantum interference device (SQUID) measurements show that the iron oxide structures exhibit interesting magnetic behavior, particularly at room temperature. This work is the first known report of magnetite 1D nanostructure growth via the vapor-liquid-solid (VLS) mechanism without using a template, as well as the first known synthesis of long epsilon-Fe2O3 nanobelts and nanowires.     

Growth Mechanism and Characterization of Single-crystalline Ga-doped SnO2 Nanowires and Self-organized SnO2/Ga2O3 Heterogeneous Microcomb Structures

Single-crystalline Ga-doped SnO2 nanowires and SnO2:Ga2O3 heterogeneous microcombs were synthesized by a simple one-step thermal evaporation and condensation method. They were characterized by means of X-ray powder diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM) and selected-area electron diffraction (SAED). FE-SEM images showed that the products consisted of nanowires and microcombs that represent a novel morphology. XRD, SAED and EDS indicated that they were single-crystalline tetragonal SnO2. The influence of experimental conditions on the morphologies of the products is discussed. The morphology of the product showed a ribbon-like stem and nanoribbon array aligned evenly along one or both side of the nanoribbon. It was found that many Ga2O3 nanoparticles deposited on the surface of the microcombs. The major core nanoribbon grew mainly along the 110 direction and the self-organized branching nanoribbons grew epitaxially along 1110 or 1110 orientation from the (110) plane of the stem. A growth process was proposed for interpreting the growth of these remarkable SnO2:Ga2O3 heterogeneous microcombs. Due to the heavy doping of Ga, the emission peak in photoluminescence spectra has red-shifted as well as broadened significantly.     

Size-manipulable synthesis of single-crystalline BaMnO3 and BaTi1/2Mn1/2O3 nanorods/nanowires

We report a size-manipulable synthesis of single-crystalline nanorods/nanowires of barium manganite (BaMnO(3)) and barium titanium manganite (BaTi(1/2)Mn(1/2)O(3)) by using the composite-hydroxide-mediated approach. The synthesis cleanly yields nanorods with a hexagonal perovskite structure. Typical nanorods have widths ranging between 50 and 100 nm, and the lengths can be easily controlled by time and temperature or by adding a small amount of water during the synthesis process. Resistance measurement shows that a phase transition happened at 58 K on BaMnO(3). The photoluminescence spectrum of BaTi(1/2)Mn(1/2)O(3) presents two emission peaks at wavelengths of 465 and 593 nm, corresponding to blue and green fluorescence. The ability to synthesize nanorod manganites of a desired length should enable detailed investigations of the size-dependent evolution of magnetism, magnetoresistance, nanoscale phase separation, and realization of a nanodevice of magnetic sensors.     

Synthesis and electrical transport of single-crystal NH4V3O8 nanobelts

Monoclinic NH(4)V(3)O(8) single-crystalline nanobelts with widths of 80-180 nm, thicknesses of 50-100 nm, and lengths up to tens of micrometers have been synthesized at large scale in an ammonium metavanadate solution by a templates/catalysts-free route. Such nanobelts grow along the direction of [010]. The individual NH(4)V(3)O(8) nanobelt exhibits nonlinear, symmetric current/voltage (I/V) characteristics, with a conductivity of 0.1-1 S/cm at room temperature and a dielectric constant of approximately 130. The dominant conduction mechanism is based on small polaron hopping due to ohmic mechanism at low electric field below 249 V/cm due to Schottky emission at medium electric field between 249 and 600 V/cm and due to the Poole-Frenkel emission mechanism at high field above 600 V/cm.     

Fabrication and photoluminescent properties of heteroepitaxial ZnO/Zn0.8Mg0.2O coaxial nanorod heterostructures

ZnO/Zn0.8Mg0.2O coaxial nanorod heterostructures were prepared by employing catalyst-free metal-organic vapor-phase epitaxy, and their structural and photoluminescent (PL) properties were investigated using transmission electron microscopy (TEM) and temperature-dependent PL spectroscopy. TEM images show that ZnO/Zn0.8Mg0.2O layers were epitaxially grown on the entire surfaces of the ZnO nanorods and the ZnO nanorod diameters as a core material were as small as 9 +/- 2 nm. A dominant PL peak was observed at 3.316 eV, from room-temperature PL spectra of ZnO/Zn0.8Mg0.2O coaxial nanorod heterostructures with ZnO core diameters of 9 nm, indicating a PL blue shift of 30 meV, which resulted from a quantum confinement effect along the radial direction in ZnO nanorods. Furthermore, temperature-dependent PL properties of the coaxial nanorod heterostructures were investigated, showing much higher PL intensity for the coaxial nanorod heterostructures than that of bare ZnO nanorods at room temperature. The origin of the enhanced PL intensity and reduced thermal quenching for the coaxial nanorod heterostructures is also discussed.     

Formation of heterodimer nanocrystals: UO2/In2O3 and FePt/In2O3

This Article reports a mechanistic study on the formation of colloidal UO(2)/In(2)O(3) and FePt/In(2)O(3) heterodimer nanocrystals. These dimer nanocrystals were synthesized via the growth of In(2)O(3) as the epitaxial material onto the seed nanocrystals of UO(2) or FePt. The resulting dimer nanocrystals were characterized using X-ray powder diffraction (XRD), energy dispersion spectroscopy, transmission electron microscopy (TEM), scanning transmission electron microscopy, and high-resolution TEM (HRTEM). The results from XRD and HRTEM clearly show that lattice strains exist in both of these dimer nanocrystals. Interestingly, the lattice of In(2)O(3) expands in UO(2)/In(2)O(3) dimers, whereas FePt/In(2)O(3) dimers exhibit compressed In(2)O(3) lattices. Using HRTEM and nanocrystal structure simulations, we have identified the crystallographic orientation of the attachment of the two segments in these two types of dimers. An unconventional Miller index was introduced to describe the crystallographic orientation of these heterodimer nanocrystals. On the basis of the results herein as well as those from other researchers, we propose an empirical law for the determination of the crystallographic attachment orientation in heterodimers: instead of growth on the facet of the seed nanocrystals where lattice mismatch is minimized, the growth of an epitaxial material often chooses the crystal facets where the first atomic monolayer of this material has the strongest affinity for the seed nanocrystals.     

Facet-dependent and au nanocrystal-enhanced electrical and photocatalytic properties of Au-Cu2O core-shell heterostructures

We report highly facet-dependent electrical properties of Cu(2)O nanocubes and octahedra and significant enhancement of gold nanocrystal cores to the electrical conductivity of Au-Cu(2)O core-shell octahedra. Cu(2)O nanocubes and octahedra and Au-Cu(2)O core-shell cubes and octahedra were synthesized by following our reported facile procedures at room temperature. Two oxide-free tungsten probes attached to a nanomanipulator installed inside a scanning electron microscope made contacts to a single Cu(2)O nanocrystal for the I-V measurements. Pristine Cu(2)O octahedra bounded by {111} facets are 1100 times more conductive than pristine Cu(2)O cubes enclosed by {100} faces, which are barely conductive. Core-shell cubes are only slightly more conductive than pristine cubes. A 10,000-fold increase in conductivity over a cube has been recorded for an octahedron. Remarkably, core-shell octahedra are far more conductive than pristine octahedra. The same facet-dependent electrical behavior can still be observed on a single nanocrystal exposing both {111} and {100} facets. This new fundamental property may be observable in other semiconductor nanocrystals. We also have shown that both core-shell cubes and octahedra outperform pristine cubes and octahedra in the photodegradation of methyl orange. Efficient photoinduced charge separation is attributed to this enhanced photocatalytic activity. Interestingly, facet-selective etching occurred over the {100} corners of some octahedra and core-shell octahedra during photocatalysis. The successful preparation of Au-Cu(2)O core-shell heterostructures with precise shape control has offered opportunities to discover new and exciting physical and chemical properties of nanocrystals.     

Large-scale synthesis of single-crystalline RE2O3 (RE=Y, Dy, Ho, Er) nanobelts by a solid-liquid-phase chemical route

Yttrium-group heavy rare-earth sesquioxide (RE(2)O(3), RE=Y, Dy, Ho, Er) nanobelts were successfully fabricated by thermolysis of solid RE(NO(3))(3)x H(2)O in a dodecylamine/1-octadecene mixed solvent system. The synthetic principle is based on separating the nucleation and growth processes by utilizing the poor solubility of RE(NO(3))(3)chi H(2)O in the solvent mixture and the heat-transportation difference between the liquid and solid. By using dodecylamine, RE(2)O(3) nanobelts can be readily obtained. X-ray diffraction (XRD) analysis shows that the synthesized RE(2)O(3) nanobelts are body-centered cubic and crystalline. Field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), selective-area electron diffraction (SAED), and high-resolution transmission electron microscopy (HR-TEM) demonstrate that the synthesized RE(2)O(3) compounds possess regular geometric structure (beltlike) with perfect crystallinity. Preliminary experimental results prove that the dodecylamine plays a key role in the formation of RE(2)O(3) nanobelts and cannot be replaced by other surfactants. Furthermore, this method can be extended to the synthesis of RE(2)O(3) nanobelt/metal nanocrystal nanocomposites and ABO(3) (A=Y, Dy, Ho, Er; B=Al) and A(3)B(5)O(12) (A=Y, Dy, Ho, Er; B=Al)-type ternary oxide nanobelts, using mixed-metal nitrate salts in the correct stoichiometry instead of single rare-earth nitrates.     

Electrospun V2O5 nanostructures with controllable morphology as high-performance cathode materials for lithium-ion batteries

Porous V(2)O(5) nanotubes, hierarchical V(2)O(5) nanofibers, and single-crystalline V(2)O(5) nanobelts were controllably synthesized by using a simple electrospinning technique and subsequent annealing. The mechanism for the formation of these controllable structures was investigated. When tested as the cathode materials in lithium-ion batteries (LIBs), the as-formed V(2)O(5) nanostructures exhibited a highly reversible capacity, excellent cycling performance, and good rate capacity. In particular, the porous V(2)O(5) nanotubes provided short distances for Li(+)-ion diffusion and large electrode-electrolyte contact areas for high Li(+)-ion flux across the interface; Moreover, these nanotubes delivered a high power density of 40.2?kW?kg(-1) whilst the energy density remained as high as 201?W?h?kg(-1), which, as one of the highest values measured on V(2)O(5)-based cathode materials, could bridge the performance gap between batteries and supercapacitors. Moreover, to the best of our knowledge, this is the first preparation of single-crystalline V(2)O(5) nanobelts by using electrospinning techniques. Interestingly, the beneficial crystal orientation provided improved cycling stability for lithium intercalation. These results demonstrate that further improvement or optimization of electrochemical performance in transition-metal-oxide-based electrode materials could be realized by the design of 1D nanostructures with unique morphologies.     

A simple and general method for the synthesis of multicomponent Na2V6O16.3H2O single-crystal nanobelts

Multicomponent Na2V6O16.3H2O (barnesite) single-crystalline nanobelts were synthesized by a direct reaction-crystallization growth of bulk V2O5 and NaF powders under hydrothermal treatment without using any templates or catalysts. This new strategy could be extended to prepare other one-dimensional multicomponent nanomaterials including ammonium, alkali-metal or alkali-earth metal vanadium oxide bronzes and other transition metal oxyfluorides. This is an efficient and mild solution method with clear advantages over the traditional high-temperature approach for the large-scale production of 1D multicomponent nanomaterials. The applicability of this approach toward the preparation of other inorganic systems, such as tungstates and molybdates, will be explored.     

Surfactant-assisted synthesis of alpha-Fe2O3 nanotubes and nanorods with shape-dependent magnetic properties

Alpha-Fe(2)O(3) nanorods and nanotubes have been synthesized and characterized by high-resolution transmission electron microscopy and X-ray diffraction. By means of different surfactant assistance, the high-quality one-dimensional products were obtained, respectively, with aqueous butanol solution as the solvent and carbamide as the base, giving rise to single-crystalline products at 150 degrees C. The formation mechanism has been presented. Significantly, the magnetic investigations show that the magnetic properties are strongly shape-dependent; i.e., the nanorods have a Morin transition at 166 K from canted antiferromagnetic state to antiferromagnetic state, while the nanotubes exhibit a three-dimensional magnetic ordering above 300 K that has been attributed to the presence of small particles in a few regions of the tubes.     

Structures of oxide nanobelts and nanowires.

We have recently reported the synthesis of one-dimensional nanobelt structures of ZnO, SnO2, In2O3, CdO, Ga2O3, and PbO2 by evaporating the desired commercial metal oxide powders at high temperatures (Science (2001), 291, 1947). The as-synthesized oxide nanobelts are pure, structurally uniform, single crystalline, and most of them free from dislocations. The beltlike morphology appears to be a unique and common structural characteristic for the family of semiconducting oxides. In the present article, we focus on the twin and stacking fault planar defects found in oxide nanobelts and nanowires although they are rarely observed. Some interesting and unique growth morphologies are presented to illustrate the roles played by surface energy and kinetics in growth. It is shown that the surfaces of the oxide nanobelts are enclosed by the low-index, low-energy crystallographic facets. The growth morphology is largely dominated by the growth kinetics.     

Ga2O3-La2O3-Yb2O3-Er2O3(HO2O3)体系光谱性质的研究

根据稀土离子能级的特点,对Ga2O3-La2O3-Yb2O3-Er2O3(HO2O3)体系的光谱性质进行了探讨,发现它们有二类发光性质:Stokes发光和反Stokes发光,研究了发光强度和发射波长与掺杂离子的依赖关系,观察到由能量的共振转移引起的荧光浓度猝灭现象,并取得了最大发光强度时的掺杂离子浓度和一些规律性结果.     

Environmentally friendly chemical route to vanadium oxide single-crystalline nanobelts as a cathode material for lithium-ion batteries

Orthorhombic V(2)O(5) single-crystalline nanobelts with widths of 100-300 nm, thicknesses of 30-40 nm, and lengths up to tens of micrometers have been synthesized on a large scale in a hydrogen peroxide aqueous solution by an environmentally friendly chemical route. Such nanobelts grow along the direction of [010]. The influence of the reaction time on the crystal structures and morphologies of the resulting products are investigated. A probable dehydration-recrystallization-cleavage mechanism for the formation of V(2)O(5) nanobelts is proposed. The experiments demonstrate that the use of a nanosized belt-like structure can considerably enhance the specific discharge capacity in lithium-ion batteries.     

Seeded growth of asymmetric binary nanocrystals made of a semiconductor TiO2 rodlike section and a magnetic gamma-Fe2O3 spherical domain

Asymmetric binary nanocrystals (BNCs), comprising one c-axis elongated anatase TiO2 section and one gamma-Fe2O3 spherical domain attached together, are synthesized by heterogeneous nucleation of iron oxide onto the longitudinal facets of TiO2 nanorods in a ternary surfactant mixture. The topologically controlled composition of the BNCs is ascertained by a combination of powder X-ray diffraction, Raman and M?ssbauer spectroscopy, high-angle annular dark-field imaging, and high-resolution transmission electron microscopy lattice fringe mapping, while their size-dependent magnetic behavior is demonstrated by ac susceptibility measurements. The heteroepitaxial growth proceeds through a mechanism never observed before for colloidal nanoheterostructures: the two domains share a restricted and locally curved junction region, which accommodates efficiently the interfacial strain and retards the formation of misfit dislocations. It is believed that these BNCs, which combine the properties of two technologically relevant oxide materials, can pave the way to reinforced applications in several fields of nanoscience, such as in photocatalysis, in malignant cell treatments, and in nanocrystal assembly.     

Interface dominated high photocatalytic properties of electrostatic self-assembled Ag(2)O/TiO(2) heterostructure

Electrostatic self-assembled Ag(2)O/TiO(2) nanobelts heterostructure was synthesized via simple physical mixing of Ag(2)O nanoparticles and TiO(2) nanobelts. The morphologies and microstructures of Ag(2)O/TiO(2) nanobelt heterostructure were characterized by high resolution transmission electron microscopy. The interface dominated high UV photocatalytic activity and degraded photoluminescence strength of composite catalyst confirmed the heterostructure effect between Ag(2)O nanoparticles and TiO(2) nanobelts. X-ray photoelectron spectroscope provided direct evidence of charge transfer on the heterostructures between them.