MXene-Regulated Metal-Oxide Interfaces with Modified Intermediate Configurations Realizing Nearly 100% CO2 Electrocatalytic Conversion

Electrocatalytic CO₂ reduction via renewable electricity provides a sustainable way to produce valued chemicals, while it suffers from low activity and selectivity. Herein, we constructed a novel catalyst with unique Ti₃C₂T_x MXene-regulated Ag−ZnO interfaces, undercoordinated surface sites, as well as mesoporous nanostructures. The designed Ag−ZnO/Ti₃C₂T_x catalyst achieves an outstanding CO₂ conversion performance of a nearly 100% CO Faraday efficiency with high partial current density of 22.59 mA cm⁻² at −0.87 V versus reversible hydrogen electrode. The electronic donation of Ag and up-shifted d-band center relative to Fermi level within MXene-regulated Ag−ZnO interfaces contributes the high selectivity of CO. The CO₂ conversion is highly correlated with the dominated linear-bonded CO intermediate confirmed by in situ infrared spectroscopy. This work enlightens the rational design of unique metal-oxide interfaces with the regulation of MXene for high-performance electrocatalysis beyond CO₂ reduction.     

Molecular Modification of Single Cobalt Sites Boosts the Catalytic Activity of CO2 Electroreduction into CO

Electroreduction of CO₂ into carbonaceous fuels or industrial chemicals using renewable energy sources is an ideal way to promote global carbon recycling. Thus, it is of great importance to develop highly selective, efficient, and stable catalysts. Herein, we prepared cobalt single atoms (Co SAs) coordinated with phthalocyanine (Co SAs-Pc). The anchoring of phthalocyanine with Co sites enabled electron transfer from Co sites to CO₂ effectively via the π-conjugated system, resulting in high catalytic performance of CO₂ electroreduction into CO. During the process of CO₂ electroreduction, the Faradaic efficiency (FE) of Co SAs-Pc for CO was as high as 94.8 %. Meanwhile, the partial current density of Co SAs-Pc for CO was −11.3 mA cm⁻² at −0.8 V versus the reversible hydrogen electrode (vs RHE), 18.83 and 2.86 times greater than those of Co SAs (−0.60 mA cm⁻²) and commercial Co phthalocyanine (−3.95 mA cm⁻²), respectively. In an H-cell system operating at −0.8 V vs RHE over 10 h, the current density and FE for CO of Co SAs-Pc dropped by 3.2 % and 2.5 %. A mechanistic study revealed that the promoted catalytic performance of Co SAs-Pc could be attributed to the accelerated reaction kinetics and facilitated CO₂ activation.     

Selective CO2-to-Syngas Conversion Enabled by Bimetallic Gold/Zinc Sites in Partially Reduced Gold/Zinc Oxide Arrays

Electrocatalytic CO₂-to-syngas (gaseous mixture of CO and H₂) is a promising way to curb excessive CO₂ emission and the greenhouse gas effect. Herein, we present a bimetallic AuZn@ZnO (AuZn/ZnO) catalyst with high efficiency and durability for the electrocatalytic reduction of CO₂ and H₂O, which enables a high Faradaic efficiency of 66.4 % for CO and 26.5 % for H₂ and 3 h stability of CO₂-to-syngas at −0.9 V vs. the reversible hydrogen electrode (RHE). The CO/H₂ ratios show a wide range from 0.25 to 2.50 over a narrow potential window (−0.7 V to −1.1 V vs. RHE). In situ attenuated total reflection surface-enhanced infrared absorption spectroscopy combined with density functional theory calculations reveals that the bimetallic synergistic effect between Au and Zn sites lowers the activation energy barrier of CO₂ molecules and facilitates electronic transfer, further highlighting the potential to control CO/H₂ ratios for efficient syngas production using the coexisting Au sites and Zn sites.     

Tuning C1/C2 Selectivity of CO2 Electrochemical Reduction over in-Situ Evolved CuO/SnO2 Heterostructure

Heterostructured oxides with versatile active sites, as a class of efficient catalysts for CO₂ electrochemical reduction (CO₂ER), are prone to undergo structure reconstruction under working conditions, thus bringing challenges to understanding the reaction mechanism and rationally designing catalysts. Herein, we for the first time elucidate the structural reconstruction of CuO/SnO₂ under electrochemical potentials and reveal the intrinsic relationship between CO₂ER product selectivity and the in situ evolved heterostructures. At −0.85 V_RHE, the CuO/SnO₂ evolves to Cu₂O/SnO₂ with high selectivity to HCOOH (Faradaic efficiency of 54.81 %). Mostly interestingly, it is reconstructed to Cu/SnO_2-x at −1.05 V_RHE with significantly improved Faradaic efficiency to ethanol of 39.8 %. In situ Raman spectra and density functional theory (DFT) calculations reveal that the synergetic absorption of *COOH and *CHOCO intermediates at the interface of Cu/SnO_2-x favors the formation of *CO and decreases the energy barrier of C−C coupling, leading to high selectivity to ethanol.     

Reduced SnO2 Porous Nanowires with a High Density of Grain Boundaries as Catalysts for Efficient Electrochemical CO2‐into‐HCOOH Conversion

Electrochemical conversion of CO₂ into energy‐dense liquids, such as formic acid, is desirable as a hydrogen carrier and a chemical feedstock. SnO_x is one of the few catalysts that reduce CO₂ into formic acid with high selectivity but at high overpotential and low current density. We show that an electrochemically reduced SnO₂ porous nanowire catalyst (Sn‐pNWs) with a high density of grain boundaries (GBs) exhibits an energy conversion efficiency of CO₂‐into‐HCOOH higher than analogous catalysts. HCOOH formation begins at lower overpotential (350 mV) and reaches a steady Faradaic efficiency of ca. 80 % at only −0.8 V vs. RHE. A comparison with commercial SnO₂ nanoparticles confirms that the improved CO₂ reduction performance of Sn‐pNWs is due to the density of GBs within the porous structure, which introduce new catalytically active sites. Produced with a scalable plasma synthesis technology, the catalysts have potential for application in the CO₂ conversion industry.     

Aqueous Photoelectrochemical CO2 Reduction to CO and Methanol over a Silicon Photocathode Functionalized with a Cobalt Phthalocyanine Molecular Catalyst

We report a precious-metal-free molecular catalyst-based photocathode that is active for aqueous CO₂ reduction to CO and methanol. The photoelectrode is composed of cobalt phthalocyanine molecules anchored on graphene oxide which is integrated via a (3-aminopropyl)triethoxysilane linker to p-type silicon protected by a thin film of titanium dioxide. The photocathode reduces CO₂ to CO with high selectivity at potentials as mild as 0 V versus the reversible hydrogen electrode (vs RHE). Methanol production is observed at an onset potential of −0.36 V vs RHE, and reaches a peak turnover frequency of 0.18 s⁻¹. To date, this is the only molecular catalyst-based photoelectrode that is active for the six-electron reduction of CO₂ to methanol. This work puts forth a strategy for interfacing molecular catalysts to p-type semiconductors and demonstrates state-of-the-art performance for photoelectrochemical CO₂ reduction to CO and methanol.     

In Situ Reconstruction of a Hierarchical Sn-Cu/SnOx Core/Shell Catalyst for High-Performance CO2 Electroreduction

The electrochemical CO₂ reduction reaction (CO₂RR) to give C₁ (formate and CO) products is one of the most techno-economically achievable strategies for alleviating CO₂ emissions. Now, it is demonstrated that the SnO_x shell in Sn_2.7Cu catalyst with a hierarchical Sn-Cu core can be reconstructed in situ under cathodic potentials of CO₂RR. The resulting Sn_2.7Cu catalyst achieves a high current density of 406.7±14.4 mA cm⁻² with C₁ Faradaic efficiency of 98.0±0.9 % at −0.70 V vs. RHE, and remains stable at 243.1±19.2 mA cm⁻² with a C₁ Faradaic efficiency of 99.0±0.5 % for 40 h at −0.55 V vs. RHE. DFT calculations indicate that the reconstructed Sn/SnO_x interface facilitates formic acid production by optimizing binding of the reaction intermediate HCOO* while promotes Faradaic efficiency of C₁ products by suppressing the competitive hydrogen evolution reaction, resulting in high Faradaic efficiency, current density, and stability of CO₂RR at low overpotentials.     

Operando NRIXS and XAFS Investigation of Segregation Phenomena in Fe-Cu and Fe-Ag Nanoparticle Catalysts during CO2 Electroreduction

Operando nuclear resonant inelastic X-ray scattering (NRIXS) and X-ray absorption fine-structure spectroscopy (XAFS) measurements were used to gain insight into the structure and surface composition of FeCu and FeAg nanoparticles (NPs) during the electrochemical CO₂ reduction (CO₂RR) and to extract correlations with their catalytic activity and selectivity. The formation of a core–shell structure during CO₂RR for FeAg NPs was inferred from the analysis of the operando NRIXS data (phonon density of states, PDOS) and XAFS measurements. Electrochemical analysis of the FeAg NPs revealed a faradaic selectivity of 36 % for CO in 0.1 M KHCO₃ at −1.1 V vs. RHE, similar to that of pure Ag NPs. In contrast, a predominant selectivity towards H₂ evolution is obtained in the case of the FeCu NPs, analogous to the results obtained for pure Fe NPs, although small Cu NPs have also been shown to favor H₂ production.     

Fabricating pyridinic N-B sites in porous carbon as efficient metal-free electrocatalyst in conversion CO2 into CH4

Electrochemical reduction of CO₂ (CO₂RR) to value-added chemicals is an attractive strategy for greenhouse gas mitigation and carbon recycle. Carbon material is one of most promising electrocatalysts but its product selectivity is limited by few modulating approaches for active sites. Herein, the predominant pyridinic N-B sites (accounting for 80% to all N species) are fabricated in hierarchically porous structure of graphene nanoribbons/amorphous carbon. The graphene nanoribbons and porous structure can accelerate electron and ion/gas transport during CO₂RR, respectively. This carbon electrocatalyst exhibits excellent selectivity toward CO₂ reduction to CH₄ with the faradaic efficiency of 68% at −0.50 V vs. RHE. As demonstrated by density functional theory, a proper adsorbed energy of *CO and *CH₂O are generated on the pyridinic N-B site resulting into high CH₄ selectivity. Therefore, this study provides a novel method to modulate active sites of carbon-based electrocatalyst to obtain high CH₄ selectivity.     

Ultra-small Size ZIF-8 Materials for Efficient and Selective Electrocatalytic Reduction of CO2 to CO

Zeolitic Imidazolate Frameworks (ZIFs) are considered as a novel porous material combining high stability in inorganic zeolites with high porosity and organic functionality of MOFs. The cage-like structure selectively and efficiently traps CO₂, which is an indispensable and critical step for Electrocatalytic CO₂ Reduction Reaction (CO₂RR). In this work, ultrasmall ZIF-8 nanomaterials are synthesized by tuning the molar ratio of the feedstock and used as electrocatalysts for the selective reduction of CO₂ to CO. The catalytic activity of the ultra-small size ZIF-8 material for the electrocatalytic reduction of CO₂ can reach satisfactory results with a Faraday efficiency of 91 % for CO and a stability of 12.5 h at a high applied potential of −1.8 V vs. RHE. The investigation can provide a new idea to explore for the design and improvement of catalysts for CO₂RR.     

Liquid Fluxional Ga Single Atom Catalysts for Efficient Electrochemical CO2 Reduction

Precise design and tuning of the micro-atomic structure of single atom catalysts (SACs) can help efficiently adapt complex catalytic systems. Herein, we inventively found that when the active center of the main group element gallium (Ga) is downsized to the atomic level, whose characteristic has significant differences from conventional bulk and rigid Ga catalysts. The Ga SACs with a P, S atomic coordination environment display specific flow properties, showing CO products with FE of ≈92 % at −0.3 V vs. RHE in electrochemical CO₂ reduction (CO₂RR). Theoretical simulations demonstrate that the adaptive dynamic transition of Ga optimizes the adsorption energy of the *COOH intermediate and renews the active sites in time, leading to excellent CO₂RR selectivity and stability. This liquid single atom catalysts system with dynamic interfaces lays the foundation for future exploration of synthesis and catalysis.     

Size-Dependent Nickel-Based Electrocatalysts for Selective CO2 Reduction

Closing the anthropogenic carbon cycle by converting CO₂ into reusable chemicals is an attractive solution to mitigate rising concentrations of CO₂ in the atmosphere. Herein, we prepared Ni metal catalysts ranging in size from single atoms to over 100 nm and distributed them across N-doped carbon substrates which were obtained from converted zeolitic imidazolate frameworks (ZIF). The results show variance in CO₂ reduction performance with variance in Ni metal size. Ni single atoms demonstrate a superior Faradaic efficiency (FE) for CO selectivity (ca. 97 % at −0.8 V vs. RHE), while results for 4.1 nm Ni nanoparticles are slightly lower (ca. 93 %). Further increase the Ni particle size to 37.2 nm allows the H₂ evolution reaction (HER) to compete with the CO₂ reduction reaction (CO₂RR). The FE towards CO production decreases to under 30 % and HER efficiency increase to over 70 %. These results show a size-dependent CO₂ reduction for various sizes of Ni metal catalysts.     

In Situ Bismuth Nanosheet Assembly for Highly Selective Electrocatalytic CO2 Reduction to Formate

The reduction of carbon dioxide (CO₂) into value-added fuels using an electrochemical method has been regarded as a compelling sustainable energy conversion technology. However, high-performance electrocatalysts for CO₂ reduction reaction (CO₂RR) with high formate selectivity and good stability need to be improved. Earth-abundant Bi has been demonstrated to be active for CO₂RR to formate. Herein, we fabricated an extremely active and selective bismuth nanosheet (Bi-NSs) assembly via an in situ electrochemical transformation of (BiO)₂CO₃ nanostructures. The as-prepared material exhibits high activity and selectivity for CO₂RR to formate, with nearly 94% faradaic efficiency at −1.03 V (versus reversible hydrogen electrode (vs. RHE)) and stable selectivity (>90%) in a large potential window ranging from −0.83 to −1.18 V (vs. RHE) and excellent durability during 12 h continuous electrolysis. In addition, the Bi-NSs based CO₂RR/methanol oxidation reaction (CO₂RR/MOR) electrolytic system for overall CO₂ splitting was constructed, evidencing the feasibility of its practical implementation.     

Highly Efficient Porous Carbon Electrocatalyst with Controllable N-Species Content for Selective CO2 Reduction

We report a straightforward strategy to design efficient N doped porous carbon (NPC) electrocatalyst that has a high concentration of easily accessible active sites for the CO₂ reduction reaction (CO₂RR). The NPC with large amounts of active N (pyridinic and graphitic N) and highly porous structure is prepared by using an oxygen-rich metal–organic framework (Zn-MOF-74) precursor. The amount of active N species can be tuned by optimizing the calcination temperature and time. Owing to the large pore sizes, the active sites are well exposed to electrolyte for CO₂RR. The NPC exhibits superior CO₂RR activity with a small onset potential of −0.35 V and a high faradaic efficiency (FE) of 98.4 % towards CO at −0.55 V vs. RHE, one of the highest values among NPC-based CO₂RR electrocatalysts. This work advances an effective and facile way towards highly active and cost-effective alternatives to noble-metal CO₂RR electrocatalysts for practical applications.     

SDS‐modified Nanoporous Silver as an Efficient Electrocatalyst for Selectively Converting CO2 to CO in Aqueous Solution

Selectively electrochemical conversion of CO₂ into organic fuel using renewable electricity is one of the most sought‐after processes. In this paper, we report the electrochemical reduction of CO₂ (CO₂RR) on the nanoporous Ag electrodes made of compacted Ag nanoparticles (AgNPs), which were prepared by one‐step reduction in the water phase with or without the surfactant sodium dodecyl sulfate (SDS). The scanning electron microscope (SEM) characterizations show that the compacted Ag electrodes have the nanoporous morphology formed by stacking AgNPs. Compared with the nanoporous Ag electrode without SDS modification (C‐AgNPs), the SDS‐modified AgNPs electrode (C‐AgNPs‐SDS) is highly effective in improving selective CO production in a wide range of potentials (–0.69 V — –1.19 V, vs. RHE), with a Faradaic efficiency of 92.2% and a current density of –8.23 mA·cm^–2 for CO production at –0.79 V (vs. RHE). C‐AgNPs‐SDS is also catalytically stable with only less than 7% deactivation after 8 h of continuous electrolysis.     

Oxygen-Bridged Indium-Nickel Atomic Pair as Dual-Metal Active Sites Enabling Synergistic Electrocatalytic CO2 Reduction

Single-atom catalysts offer a promising pathway for electrochemical CO₂ conversion. However, it is still a challenge to optimize the electrochemical performance of dual-atom catalysts. Here, an atomic indium-nickel dual-sites catalyst bridged by an axial oxygen atom (O-In-N₆-Ni moiety) was anchored on nitrogenated carbon (InNi DS/NC). InNi DS/NC exhibits superior CO selectivity with Faradaic efficiency higher than 90 % over a wide potential range from −0.5 to −0.8 V versus reversible hydrogen electrode (vs. RHE). Moreover, an industrial CO partial current density up to 317.2 mA cm⁻² is achieved at −1.0 V vs. RHE in a flow cell. In situ ATR-SEIRAS combined with theory calculations reveal that the synergistic effect of In-Ni dual-sites and O atom bridge not only reduces the reaction barrier for the formation of *COOH, but also retards the undesired hydrogen evolution reaction. This work provides a feasible strategy to construct dual-site catalysts towards energy conversion.     

Mechanistic Elucidations of Highly Dispersed Metalloporphyrin Metal-Organic Framework Catalysts for CO2 Electroreduction

Immobilization of porphyrin complexes into crystalline metal–organic frameworks (MOFs) enables high exposure of porphyrin active sites for CO₂ electroreduction. Herein, well-dispersed iron-porphyrin-based MOF (PCN-222(Fe)) on carbon-based electrodes revealed optimal turnover frequencies for CO₂ electroreduction to CO at 1 wt.% catalyst loading, beyond which the intrinsic catalyst activity declined due to CO₂ mass transport limitations. In situ Raman suggested that PCN-222(Fe) maintained its structure under electrochemical bias, permitting mechanistic investigations. These revealed a stepwise electron transfer-proton transfer mechanism for CO₂ electroreduction on PCN-222(Fe) electrodes, which followed a shift from a rate-limiting electron transfer to CO₂ mass transfer as the potential increased from −0.6 V to −1.0 V vs. RHE. Our results demonstrate how intrinsic catalytic investigations and in situ spectroscopy are needed to elucidate CO₂ electroreduction mechanisms on PCN-222(Fe) MOFs.     

2-Aminobenzenethiol-Functionalized Silver-Decorated Nanoporous Silicon Photoelectrodes for Selective CO2 Reduction

A molecularly thin layer of 2-aminobenzenethiol (2-ABT) was adsorbed onto nanoporous p-type silicon (b-Si) photocathodes decorated with Ag nanoparticles (Ag NPs). The addition of 2-ABT alters the balance of the CO₂ reduction and hydrogen evolution reactions, resulting in more selective and efficient reduction of CO₂ to CO. The 2-ABT adsorbate layer was characterized by Fourier transform infrared (FTIR) spectroscopy and modeled by density functional theory calculations. Ex situ X-ray photoelectron spectroscopy (XPS) of the 2-ABT modified electrodes suggests that surface Ag atoms are in the +1 oxidation state and coordinated to 2-ABT via Ag−S bonds. Under visible light illumination, the onset potential for CO₂ reduction was −50 mV vs. RHE, an anodic shift of about 150 mV relative to a sample without 2-ABT. The adsorption of 2-ABT lowers the overpotentials for both CO₂ reduction and hydrogen evolution. A comparison of electrodes functionalized with different aromatic thiols and amines suggests that the primary role of the thiol group in 2-ABT is to anchor the NH₂ group near the Ag surface, where it serves to bind CO₂ and also to assist in proton transfer.     

Understanding of Strain Effects in the Electrochemical Reduction of CO2: Using Pd Nanostructures as an Ideal Platform

Tuning the surface strain of heterogeneous catalysts represents a powerful strategy to engineer their catalytic properties by altering the electronic structures. However, a clear and systematic understanding of strain effect in electrochemical reduction of carbon dioxide is still lacking, which restricts the use of surface strain as a tool to optimize the performance of electrocatalysts. Herein, we demonstrate the strain effect in electrochemical reduction of CO₂ by using Pd octahedra and icosahedra with similar sizes as a well‐defined platform. The Pd icosahedra/C catalyst shows a maximum Faradaic efficiency for CO production of 91.1 % at −0.8 V versus reversible hydrogen electrode (vs. RHE), 1.7‐fold higher than the maximum Faradaic efficiency of Pd octahedra/C catalyst at −0.7 V (vs. RHE). The combination of molecular dynamic simulations and density functional theory calculations reveals that the tensile strain on the surface of icosahedra boosts the catalytic activity by shifting up the d ‐band center and thus strengthening the adsorption of key intermediate COOH*. This strain effect was further verified directly by the surface valence‐band photoemission spectra and electrochemical analysis.     

Exfoliated 2D Layered and Nonlayered Metal Phosphorous Trichalcogenides Nanosheets as Promising Electrocatalysts for CO2 Reduction

Two-dimensional (2D) materials catalysts provide an atomic-scale view on a fascinating arena for understanding the mechanism of electrocatalytic carbon dioxide reduction (CO₂ ECR). Here, we successfully exfoliated both layered and nonlayered ultra-thin metal phosphorous trichalcogenides (MPCh₃) nanosheets via wet grinding exfoliation (WGE), and systematically investigated the mechanism of MPCh₃ as catalysts for CO₂ ECR. Unlike the layered CoPS₃ and NiPS₃ nanosheets, the active Sn atoms tend to be exposed on the surfaces of nonlayered SnPS₃ nanosheets. Correspondingly, the nonlayered SnPS₃ nanosheets exhibit clearly improved catalytic activity, showing formic acid selectivity up to 31.6 % with −7.51 mA cm⁻² at −0.65 V vs. RHE. The enhanced catalytic performance can be attributed to the formation of HCOO* via the first proton-electron pair addition on the SnPS₃ surface. These results provide a new avenue to understand the novel CO₂ ECR mechanism of Sn-based and MPCh₃-based catalysts.