Surviving High‐Temperature Calcination: ZrO2‐Induced Hematite Nanotubes for Photoelectrochemical Water Oxidation

Nanotubular Fe₂O₃ is a promising photoanode material, and producing morphologies that withstand high‐temperature calcination (HTC) is urgently needed to enhance the photoelectrochemical (PEC) performance. This work describes the design and fabrication of Fe₂O₃ nanotube arrays that survive HTC for the first time. By introducing a ZrO₂ shell on hydrothermal FeOOH nanorods by atomic layer deposition, subsequent high‐temperature solid‐state reaction converts FeOOH‐ZrO₂ nanorods to ZrO₂‐induced Fe₂O₃ nanotubes (Zr‐Fe₂O₃ NTs). The structural evolution of the hematite nanotubes is systematically explored. As a result of the nanostructuring and shortened charge collection distance, the nanotube photoanode shows a greatly improved PEC water oxidation activity, exhibiting a photocurrent density of 1.5 mA cm⁻² at 1.23 V (vs. reversible hydrogen electrode, RHE), which is the highest among hematite nanotube photoanodes without co‐catalysts. Furthermore, a Co‐Pi decorated Zr‐Fe₂O₃ NT photoanode reveals an enhanced onset potential of 0.65 V (vs. RHE) and a photocurrent of 1.87 mA cm⁻² (at 1.23 V vs. RHE).     

Template-Free Hydrothermal Synthesis of Hollow α-FeOOH Urchin-Like Spheres and Their Conversion to α-Fe2O3 Under Low-Temperature Thermal Treatment in Air

Hollow α-FeOOH urchin-like spheres were synthesized by a simple hydrothermal method at 160 °C for 12 h and their thermal conversion to hollow α-Fe₂O₃ urchin-like spheres was performed at 300 °C for 2 h in air. The results from X-ray diffraction and electron microscopy analyses reveal that hollow α-FeOOH urchin-like spheres were completely transformed to hollow α-Fe₂O₃ urchin-like spheres without a significant morphological change. Also, the effect of hydrothermal treatment temperature (170–200 °C for 12 h) on the phase structure and morphology of the final product was investigated. Pure α-FeOOH, the mixture of α-FeOOH and α-Fe₂O₃, and pure α-Fe₂O₃ with different morphologies were obtained at <180, 180–190 and 200 °C, respectively. The obtained materials can be used in the photodegradation of organic pollutants under visible light irradiation.     

Light‐Driven Water Splitting Mediated by Photogenerated Bromine

Light‐driven water splitting was achieved using a dye‐sensitized mesoporous oxide film and the oxidation of bromide (Br^?) to bromine (Br₂) or tribromide (Br₃^?). The chemical oxidant (Br₂ or Br₃^?) is formed during illumination at the photoanode and used as a sacrificial oxidant to drive a water oxidation catalyst (WOC), here demonstrated using [Ru(bda)(pic)₂], ( 1 ; pic=picoline, bda=2,2′‐bipyridine‐6,6′‐dicarboxylate). The photochemical oxidation of bromide produces a chemical oxidant with a potential of 1.09 V vs. NHE for the Br₂/Br^? couple or 1.05 V vs. NHE for the Br₃^?/Br^? couple, which is sufficient to drive water oxidation at 1 (Ru^V/IV≈1.0 V vs. NHE at pH 5.6). At pH 5.6, using a 0.2 m acetate buffer containing 40 mm LiBr and the [Ru(4,4′‐PO₃H₂‐bpy)(bpy)₂]²⁺ ( RuP ²⁺, bpy=2,2′‐bipyridine) chromophore dye on a SnO₂/TiO₂ core–shell electrode resulted in a photocurrent density of around 1.2 mA cm^?2 under approximately 1 Sun illumination and a Faradaic efficiency upon addition of 1 of 77 % for oxygen evolution.     

Deposition of PdPtAu Nanoparticles on Hollow Nanospheres of Fe3O4 as a New Catalyst for Methanol Electrooxidation: Application in Direct Methanol Fuel Cell

In this study, immobilized hollow nanospheres of Fe₃O₄ with Palladium, Platinum and Gold nanoparticles (Fe₃O₄HNS‐PdPtAuNPs) was synthesized by hydrothermal and chemical reduction methods and characterized by various techniques such as field emission scanning electron microscopy, energy dispersive analysis of X‐rays and elemental mapping images. The electrocatalytic activity of the modified glassy carbon electrode (GCE) with Fe₃O₄HNS‐PdPtAuNPs (GCE/Fe₃O₄HNS‐PdPtAuNPs) toward methanol electrooxidation was investigated by cyclic voltammetry and chronoamperometry in 1 M NaOH solution. According to the results, Fe₃O₄HNS‐PdPtAuNPs catalyst demonstrated the highest efficiency for methanol electrooxidation in comparison with Fe₃O₄HNS‐PdNPs, Fe₃O₄HNS‐PtNPs, Fe₃O₄HNS‐PdAuNPs, Fe₃O₄HNS‐PtAuNPs and Fe₃O₄HNS‐PdPtNPs. The value of electron transfer coefficient (α ) and the ratio of current densities (I_f /I_b ) for methanol oxidation on the Fe₃O₄HNS‐PdPtAuNPs/GC catalyst were calculated 0.61 and 5.13, respectively. The reaction order was discovered to be 0.98 for CH₃OH. A direct methanol fuel cell was developed with the suggested catalyst under several conditions.     

A Calix[4]arene-Based Cyclic Dinuclear Ruthenium Complex for Light-Driven Catalytic Water Oxidation

A cyclic dinuclear ruthenium(bda) (bda: 2,2’-bipyridine-6,6’-dicarboxylate) complex equipped with oligo(ethylene glycol)-functionalized axial calix[4]arene ligands has been synthesized for homogenous catalytic water oxidation. This novel Ru(bda) macrocycle showed significantly increased catalytic activity in chemical and photocatalytic water oxidation compared to the archetype mononuclear reference [Ru(bda)(pic)₂]. Kinetic investigations, including kinetic isotope effect studies, disclosed a unimolecular water nucleophilic attack mechanism of this novel dinuclear water oxidation catalyst (WOC) under the involvement of the second coordination sphere. Photocatalytic water oxidation with this cyclic dinuclear Ru complex using [Ru(bpy)₃]Cl₂ as a standard photosensitizer revealed a turnover frequency of 15.5 s⁻¹ and a turnover number of 460. This so far highest photocatalytic performance reported for a Ru(bda) complex underlines the potential of this water-soluble WOC for artificial photosynthesis.     

Synergistic Cocatalytic Effect of Carbon Nanodots and Co3O4 Nanoclusters for the Photoelectrochemical Water Oxidation on Hematite

Cocatalysis plays an important role in enhancing the activity of semiconductor photocatalysts for solar water splitting. Compared to a single cocatalyst configuration, a cocatalytic system consisting of multiple components with different functions may realize outstanding enhancement through their interactions, yet limited research has been reported. Herein we describe the synergistic cocatalytic effect between carbon nanodots (CDots) and Co₃O₄, which promotes the photoelectrochemical water oxidation activity of the Fe₂O₃ photoanode with a 60 mV cathodically shifted onset potential. The C/Co₃O₄‐Fe₂O₃ photoanode exhibits a photocurrent density of 1.48 mA cm^?2 at 1.23 V (vs. reversible hydrogen electrode), 78 % higher than that of the bare Fe₂O₃ photoanode. The slow reaction process on the single Co^III‐OH site of the Co₃O₄ cocatalyst, oxidizing H₂O to H₂O₂ with two photogenerated holes, could be accelerated by the timely H₂O₂ oxidation to O₂ catalyzed on CDots.     

Iron (III) nanocomposites for enzyme-less biomimetic cathode: A promising material for use in biofuel cells

In this paper, we discuss the synthesis and electrochemical properties of a new material based on iron oxide nanoparticles stabilized with poly(diallyldimethylammonium chloride) (PDAC); this material can be used as a biomimetic cathode material for the reduction of H₂O₂ in biofuel cells. A metastable phase of iron oxide and iron hydroxide nanoparticles (PDAC–FeOOH/Fe₂O₃-NPs) was synthesized through a single procedure. On the basis of the Stokes–Einstein equation, colloidal particles (diameter: 20 nm) diffused at a considerably slow rate (D = 0.9 × 10^? 11 m s^? 1) as compared to conventional molecular redox systems. The quasi-reversible electrochemical process was attributed to the oxidation and reduction of Fe³⁺/Fe²⁺ from PDAC–FeOOH/Fe₂O₃-NPs; in a manner similar to redox enzymes, it acted as a pseudo-prosthetic group. Further, PDAC–FeOOH/Fe₂O₃-NPs was observed to have high electrocatalytic activity for H₂O₂ reduction along with a significant overpotential shift, ΔE = 0.68 V from ? 0.29 to 0.39 V, in the presence and absence of PDAC–FeOOH/Fe₂O₃-NPs. The abovementioned iron oxide nanoparticles are very promising as candidates for further research on biomimetic biofuel cells, suggesting two applications: the preparation of modified electrodes for direct use as cathodes and use as a supporting electrolyte together with H₂O₂.     

Integrating CuO−Fe2O3 Nanocomposites and Supramolecular Assemblies of Phenazine for Visible‐Light Photoredox Catalysis

A photoredox catalytic ensemble consisting of CuO‐Fe₂O₃ nanocomposites and oligomeric derivative of phenazine has been developed. The prepared system acts as an efficient photoredox catalyst for C?N bond formation reaction via SET mechanism under ‘green’ conditions (aerial environment, mixed aqueous media, recyclable), requiring less equivalents of base and amine substrate. The present study demonstrates the significant role of supramolecular assemblies as photooxidants and reductants upon irradiation and their important contribution towards the activation of the metallic centre through energy transfer and electron transfer pathways. The potential of oligomer 4 : CuO‐Fe₂O₃ has also been explored for C?C bond formation reactions via the Sonogashira protocol.     

Axial Ligand and Spin‐State Influence on the Formation and Reactivity of Hydroperoxo–Iron(III) Porphyrin Complexes

The present study focuses on the formation and reactivity of hydroperoxo–iron(III) porphyrin complexes formed in the [Fe^III(tpfpp)X]/H₂O₂/HOO^? system (TPFPP=5,10,15,20‐tetrakis(pentafluorophenyl)‐21H,23H‐porphyrin; X=Cl^? or CF₃SO₃^?) in acetonitrile under basic conditions at ?15 °C. Depending on the selected reaction conditions and the active form of the catalyst, the formation of high‐spin [Fe^III(tpfpp)(OOH)] and low‐spin [Fe^III(tpfpp)(OH)(OOH)] could be observed with the application of a low‐temperature rapid‐scan UV/Vis spectroscopic technique. Axial ligation and the spin state of the iron(III) center control the mode of O? O bond cleavage in the corresponding hydroperoxo porphyrin species. A mechanistic changeover from homo‐ to heterolytic O? O bond cleavage is observed for high‐ [Fe^III(tpfpp)(OOH)] and low‐spin [Fe^III(tpfpp)(OH)(OOH)] complexes, respectively. In contrast to other iron(III) hydroperoxo complexes with electron‐rich porphyrin ligands, electron‐deficient [Fe^III(tpfpp)(OH)(OOH)] was stable under relatively mild conditions and could therefore be investigated directly in the oxygenation reactions of selected organic substrates. The very low reactivity of [Fe^III(tpfpp)(OH)(OOH)] towards organic substrates implied that the ferric hydroperoxo intermediate must be a very sluggish oxidant compared with the iron(IV)–oxo porphyrin π‐cation radical intermediate in the catalytic oxygenation reactions of cytochrome P450.     

Integration of Fe_2O_3-based photoanode and atomically dispersed cobalt cathode for efficient photoelectrochemical NH_3 synthesis

Realizing nitrogen reduction reaction(NRR) to synthesis NH_3 under mild conditions has gained extensive attention as a promising alternative way to the energy-and emission-intensive Haber-Bosch process.Among varieties of potential strategies,photoelectrochemical(PEC) NRR exhibits many advantages including utilization of solar energy,water(H_2O) as the hydrogen source and ambient operation conditions.Herein,we have designed a solar-driven PEC-NRR system integrating high-efficiency Fe_2O_3-based photoanode and atomically dispersed cobalt(Co) cathode for ambient NH_3 synthesis.Using such solar-driven PEC-NRR system,high-efficiency Fe_2O_3-based photoanode is responsible for H_2O/OH oxidatio n,and meanwhile the generated photoelectrons transfer to the single-atom Co cathode for the N_2 reduction to NH_3.As a result,this system can afford an NH_3 yield rate of 1021.5 μg mgco~(-1) h~(-1) and a faradic efficiency of 11.9% at an applied potential bias of 1.2 V(versus reversible hydrogen electrode) on photoanode in 0.2 mol/L NaOH electrolyte under simulated sunlight irradiation.     

Magnetic methylene-based mesoporous organosilica composite-supported IL/Pd: a powerful and highly recoverable catalyst for oxidative coupling of phenols and naphthols

A novel magnetic methylene-based mesoporous organosilica composite-supported IL/Pd complex (Fe₃O₄@MePMO-IL/Pd) was synthesized and characterized, and its catalytic performance was investigated. The preparation of the Fe₃O₄@MePMO composite was achieved through coating of Fe₃O₄ nanoparticles with a mixture of tetramethoxysilane, bis(triethoxysilyl)methane, and (3-chloropropyl)-trimethoxysilane in the presence of cetyltrimethylammonium bromide surfactant. The Fe₃O₄@MePMO was then modified with alkyl imidazolium ionic liquid and palladium species to deliver the Fe₃O₄@MePMO-IL/Pd nanocatalyst. This catalyst was characterized using Fourier transform infrared, thermal gravimetric, wide-angle powder X-ray diffraction, low-angle powder X-ray diffraction, scanning electron microscopy, transmission electron microscopy, vibrating sample magnetometer, energy-dispersive X-ray, and nitrogen adsorption–desorption analyses. The Fe₃O₄@MePMO-IL/Pd was effectively used as a highly recoverable and durable catalyst for the selective oxidative coupling of phenols and 2-naphthols under aerobic conditions.     

Synthesis of mesoporous functional hematite nanofibrous photoanodes by electrospinning

Iron(III) oxide (hematite, Fe₂O₃) nanofibers, as visible light‐induced photoanode for water oxidation reaction of a water splitting process, were fabricated through electrospinning method followed by calcination treatment. The prepared samples were characterized with scanning electron microscopy, and three‐electrode galvanostat/potentiostat for evaluating their photoelectrochemical (PEC) properties. The diameter of the as‐spun fibers is about 300 nm, and calcinated fibers have diameter less than 110 nm with mesoporous structure. Optimized multilayered electrospun α‐Fe₂O₃ nanostructure mats showed photocurrent density of 0.53 mA/cm² under dark and visible illumination conditions at voltage 1.23 V and constant intensity (900 mW/cm²). This photovoltaic performance of nanostructure mats makes it suitable choice for using in the PEC water splitting application as an efficient photoanode. This method, if combined with appropriate flexible conductive substrate, has the potential for producing flexible hematite solar fuel generators. Copyright © 2015 John Wiley & Sons, Ltd.     

A Novel Biomimetic Hydrogen Peroxide Biosensor Based on Pt Flowers‐decorated Fe3O4/Graphene Nanocomposite

A sensitive and selective amperometric H₂O₂ biosensor was obtained by utilizing the electrodeposition of Pt flowers on iron oxide‐reduced graphene oxide (Fe₃O₄/rGO) nanocomposite modified glassy carbon electrode (GCE). The morphology of Fe₃O₄/rGO and Pt/Fe₃O₄/rGO was characterized by transmission electron microscopy (TEM) and scanning electron microscopy (SEM), respectively. The step‐wise modification and the electrochemical characteristics of the resulting biosensor were characterized by cyclic voltammetry (CV) and chronoamperometry methods. Thanks to the fast electron transfer at the Pt/Fe₃O₄/rGO electrode interface, the developed biosensor exhibits a fast and linear amperometric response upon H₂O₂. The linear range of Pt/Fe₃O₄/rGO is 0.1∼2.4 mM (R²=0.998), with a sensitivity of 6.875 μA/mM and a detection limit of 1.58 μM (S/N=3). In addition, the prepared biosensor also provides good anti‐interferent ability and long‐term stability due to the favorable biocompatibility of the electrode interface. The proposed sensor will become a reliable and effective tool for monitoring and sensing the H₂O₂ in complicate environment.     

Enhanced photoelectrocatalytic performance of nanoporous WO3 photoanode by modification of cobalt–phosphate (Co–Pi) catalyst

Nanoporous WO₃ photoanode modified with cobalt–phosphate (Co–Pi) catalyst was synthesized in this study. The nanoporous WO₃ was prepared by anodization of W foil following a photo-assisted electrodeposition of Co–Pi catalyst. The presence of Co–Pi catalyst obviously facilitated the charge transfer and reduced the recombination of photoexcited electron/hole by forming an adequate junction between the catalyst and the nanoporous WO₃. The photocurrent density of nanoporous WO₃/Co–Pi was found to be 1.4 mA/cm² at 0.8 V which was 20 % higher than nanoporous WO₃, and the nanoporous WO₃/Co–Pi photoanode is also more stable for long-term application.     

修饰吡啶衍生物的染料敏化光阳极水氧化性能的研究

染料敏化光电化学电池(DSPECs)是构建人工光合作用体系的潜在方式,其优势在于可通过优化染料结构来拓展可见光吸收范围,从根本上提高太阳能利用效率.染料敏化光阳极在受激发产生电荷分离之后,激发电子注入TiO₂半导体导带,由于其导带位置比传统的可见光半导体,如BiVO4和Fe3O4等相比较负,因此理论上可以在较小的偏压下取得较大的光电转换效率,也更有利于和光阴极相耦合实现无偏压分解水.电荷传输动力学研究表明,注入到TiO₂导带的电子向氧化态光敏剂和催化剂的回传是造成体系能量损失的主要原因,集中体现在光电流密度和效率的降低.目前,已经报道了多种手段来减少DSPECs光阳极表面的电子回传,包括使用带有长烷基链的锚定基团对水氧化催化剂进行修饰,在半导体表面引入电子中介体以及使用核-壳结构的基底等.其中,SnO2/TiO₂基底被广泛应用在染料敏化光阳极中,这种基底可以提高光生电子的注入效率,同时两种金属氧化物之间的异质结有效抑制了电子回传,从而提高了DSPECs的光电活性.然而,核-壳结构基底需要使用原子层沉积技术来制备,所以操作相对复杂.本文基于Ru-bda(bda=2,2'-联吡啶-6,6'-二羧酸)结构的分子水氧化催化剂和带有磷酸修饰基团的三联吡啶钌通过共吸附的方式制备染料敏化光阳极,在不使用核-壳结构基底的情况下,利用吡啶衍生物对TiO₂电极表面的修饰来减少电子回传.本文利用一系列吡啶衍生物作修饰负载在TiO₂光阳极上(TiO₂|RuP,1;RuP=Ru(4,4'-(PO3H2)2-2,2'-联吡啶)(2,2'-联吡啶)2;1=Ru(bda)(L)2,bda=2,2'-联吡啶-6,6'-二羧酸,L=(10-吡啶-4-基氧基)癸基)膦酸.在100 mW/cm2的白光照射下(λ>400 nm),TiO₂|RuP,1,P1(P1=4-羟基吡啶)光阳极在0.4 V(vs.NHE)的外加偏压下获得了1 mA/cm2的光电流密度,其光电流比未修饰吡啶的光阳极增加了42%.同时,其入射光子-电流转化效率在470 nm波长的单色光光照下达到最大,为13.6%.经过吡啶衍生物所修饰的光阳极光电性能和文献中利用核-壳结构基底所制备的类似光阳极性能相当,且光电流密度随吡啶对位取代基供电性能的增强而增大.瞬态吸收光谱和电化学阻抗谱测试表明,吡啶吸附在光阳极上能有效地抑制界面上的电子回传,延长电荷分离寿命,是光电流增加的根本原因,这也表明有机小分子修饰是提高染料敏化光阳极性能的简单、有效的策略.     

Chemoselective Transfer Hydrogenation of Cinnamaldehyde over Activated Charcoal Supported Pt/Fe3O4 Catalyst

A variety of spherical and structured activated charcoal supported Pt/Fe₃O₄ composites with an average particle size of ～100 nm have been synthesized by a self-assembly method using the difference of reduction potential between Pt (IV) and Fe (Ⅱ) precursors as driving force. The formed Fe₃O₄ nanoparticles (NPs) effectively prevent the aggregation of Pt nanocrystallites and promote the dispersion of Pt NPs on the surface of catalyst, which will be favorable for the exposure of Pt active sites for high-efficient adsorption and contact of substrate and hydrogen donor. The electron-enrichment state of Pt NPs donated by Fe₃O₄ nanocrystallites is corroborated by XPS measurement, which is responsible for promoting and activating the terminal C=O bond of adsorbed substrate via a vertical configuration. The experimental results show that the activated charcoal supported Pt/Fe₃O₄ catalyst exhibits 94.8% selectivity towards cinnamyl alcohol by the transfer hydrogenation of cinnamaldehyde with Pt loading of 2.46% under the optimum conditions of 120℃ for 6 h, and 2-propanol as a hydrogen donor. Additionally, the present study demonstrates that a high-efficient and recyclable catalyst can be rapidly separated from the mixture due to its natural magnetism upon the application of magnetic field.     

Formation of α-Fe2O3/FeOOH nanostructures with various morphologies by a hydrothermal route and their photocatalytic properties

A series of α-Fe₂O₃/FeOOH nanostructures with different morphologies have successfully been synthesized based on K₄[Fe(CN)₆] at 140 °C by a novel hydrothermal method. The morphology and phase of α-Fe₂O₃/FeOOH can be controlled by adjusting the reaction time. UV–vis absorption spectrum, X-ray powder diffraction, and transmission electron microscopy analyses were used to characterize the resulting products. A detailed, rational mechanism is proposed for the formation of α-Fe₂O₃/FeOOH nanostructures. The potential applications of the as-synthesized α-Fe₂O₃/FeOOH nanoparticles with different morphologies on photocatalytic decomposition of salicylic acid were also investigated.     

Synthetic Active Site Model of the [NiFeSe] Hydrogenase

A dinuclear synthetic model of the [NiFeSe] hydrogenase active site and a structural, spectroscopic and electrochemical analysis of this complex is reported. [NiFe(‘S₂Se₂’)(CO)₃] (H₂‘S₂Se₂’=1,2‐bis(2‐thiabutyl‐3,3‐dimethyl‐4‐selenol)benzene) has been synthesized by reacting the nickel selenolate complex [Ni(‘S₂Se₂’)] with [Fe(CO)₃bda] (bda=benzylideneacetone). X‐ray crystal structure analysis confirms that [NiFe(‘S₂Se₂’)(CO)₃] mimics the key structural features of the enzyme active site, including a doubly bridged heterobimetallic nickel and iron center with a selenolate terminally coordinated to the nickel center. Comparison of [NiFe(‘S₂Se₂’)(CO)₃] with the previously reported thiolate analogue [NiFe(‘S₄’)(CO)₃] (H₂‘S₄’=H₂xbsms=1,2‐bis(4‐mercapto‐3,3‐dimethyl‐2‐thiabutyl)benzene) showed that the selenolate groups in [NiFe(‘S₂Se₂’)(CO)₃] give lower carbonyl stretching frequencies in the IR spectrum. Electrochemical studies of [NiFe(‘S₂Se₂’)(CO)₃] and [NiFe(‘S₄’)(CO)₃] demonstrated that both complexes do not operate as homogenous H₂ evolution catalysts, but are precursors to a solid deposit on an electrode surface for H₂ evolution catalysis in organic and aqueous solution.     

纳米线堆积的铁硅球体催化剂用于费托合成

以共沉淀法所制的工业铁硅球体催化剂(indus-FS)为原料,用改进的有机胺蒸气相传输转化法,得到了负载高分散铁的交织氧化硅纳米线球体催化剂(NW-FS),并用于费托合成反应.在所制纳米线催化剂中,原料催化剂中氧化硅在氧化铁诱导下成功地转变成纳米线交织微球载体,而氧化铁组分则高度分散在氧化硅纳米线上.用扫描电镜、透射电镜、X射线衍射、低温氮吸附、X射线光电子能谱和程序升温还原等方法对所得纳米线催化剂进行了表征.在费托合成中,纳米线铁硅催化剂由于其特殊的堆积结构所导致的低的扩散阻力和高的铁活性组分分散度,提高了低碳烯烃尤其是乙烯的选择性.纳米线铁硅催化剂上低碳产物(C2–C4)的烯烷比为3.3,高于母体工业催化剂的1.9.     

可循环磁性Pt/Fe_3O_4-MCNT催化剂上的肉桂醛选择性加氢反应

采用多步法依次将制备的Fe3O4纳米颗粒和Pt纳米颗粒负载到多壁碳纳米管(MCNT)上得到Pt/Fe3O4-MCNT磁性催化剂,以X射线衍射(XRD)、透射电镜(TEM)、超导量子干涉磁强计(SQUID)和热重-差热分析(TG-DTA)对Pt/Fe3O4-MCNT磁性催化剂的结构和磁性质进行了表征。研究发现预制备的Fe3O4纳米颗粒与Pt纳米颗粒均匀地分散于MCNT上,新制备以及多次使用后的Pt/Fe3O4-MCNT室温下都具有良好的超顺磁性。研究了Pt/Fe3O4-MCNT磁性催化剂上的肉桂醛选择性加氢反应,结果显示催化剂具有良好的C=O加氢活性,肉桂醛转化率在50%左右时,肉桂醇选择性可达96%以上。尺寸均一的Pt粒子均匀的分散在催化剂上可能是催化剂具有良好的C=O加氢选择性的重要原因。在外加磁场作用下催化剂可以高效地从液相反应体系中分离,经多次循环使用后仍具有良好的催化性能。