Evolution of SiGe nanoclusters and micro defects in the Si1−xGex layer fabricated by two-step ion implantation and subsequent thermal annealing

The Si_1−xGe_x thin layer is fabricated by two-step Ge ion implantation into (0 0 1) silicon. The embedded SiGe nanoclusters are produced in the Si_1−xGe_x layer upon further annealing. The number and size of the nanoclusters changed due to the Ge diffusion during annealing. Micro defects around the nanoclusters are illustrated. It is revealed that the change of Si-Si phonon mode is causing by the nanoclusters and micro defects.     

Structural, magnetic and electronic transport properties of MnxGe1−x/Ge(0 0 1) films grown by MBE at 350 °C

We report on the structural, magnetic and electronic transport properties of thin Mn_xGe_1−x films grown at 350 °C. Isolated Mn₅Ge₃ nanoclusters, about 100 nm in size, were formed at the top surface of the film, dominating the magnetic properties of the whole film. Electronic transport properties show Mn doping effect indicating the presence of substitutional Mn ions dispersed in the Ge host, contributing to the formation of a Mn_xGe_1−x diluted phase. Electrical behaviour indicates a saturation effect with the raise of the nominal Mn concentration in the film, above x ≅ 0.03.     

Enhanced formation of periodic arrays of low-resistivity NiSi nanocontacts on (0 0 1)Si0.7Ge0.3 by nanosphere lithography with a thin interposing Si layer

In this study, we demonstrated significant enhancement of the formation of low-resistivity NiSi nanocontacts with controlled size on (0 0 1)Si_0.7Ge_0.3 substrates by combining the nanosphere lithography with the use of a new Ni/a-Si bilayer nanodot structure. Low-resistivity NiSi with an average size of 78 nm was observed to be the only silicide phase formed in samples annealed at 350-800 °C. The presence of the interposing Si layer with appropriate thickness was found to effectively prevent Ge segregation and maintain the interface stability in forming NiSi nanocontacts on (0 0 1)Si_0.7Ge_0.3. As the annealing temperature was increased to 900 °C, amorphous SiO_x nanowires were observed to grow from silicide nanocontact regions. The NSL technique in conjunction with a sacrificial Si interlayer process promises to be applicable in fabricating periodic arrays of other low-resistivity silicide nanocontacts on Si_1−xGe_x substrates without complex lithography.     

Investigating the lateral motion of SiGe islands by selective chemical etching

SiGe islands grown by deposition of 10 monolayers of Ge on Si(0 0 1) at 740 °C were investigated by using a combination of selective wet chemical etching and atomic force microscopy. The used etchant, a solution consisting of ammonium hydroxide and hydrogen peroxide, shows a high selectivity of Ge over Si_xGe_1−x and is characterized by relatively slow etching rates for Si-rich alloys. By performing successive etching experiments on the same sample area, we are able to gain a deeper insight into the lateral displacement the islands undergo during post growth annealing.     

Electrical characteristics of hole resonant tunneling diodes with high Ge fraction (x > 0.4) Si/strained Si1−xGex/Si(1 0 0) heterostructure

Effectiveness of a Ge fraction modulated spacer in hole resonant tunneling diodes (RTDs) with Si/strained Si_1−xGe_x heterostructures epitaxially grown on Si(1 0 0) was investigated to improve the electrical characteristics at higher temperatures. Electrical characteristics measured for 30 RTDs, with the modulated spacer at higher Ge fraction (x = 0.48) on a single wafer, show that the deviation of the peak current and voltage at the resonant peak falls in ranges of ±25% and ±10%, respectively. For the RTDs, negative differential conductance (NDC) characteristics are obtained even at higher temperatures around 230 K than that for the RTDs with x = 0.42. The result indicates that the introduction of higher Ge fraction is effective for NDC in RTD at higher temperature.     

Evidence for fast decay dynamics of the photoluminescence from Ge nanocrystals embedded in SiO2

We have investigated the origin of room temperature photoluminescence from ion-beam synthesized Ge nanocrystals (NCs) embedded in SiO₂ using steady state and time-resolved photoluminescence (PL) measurements. Ge NCs of diameter 4-13 nm were grown embedded in a thermally grown SiO₂ layer by Ge⁺ ion implantation and subsequent annealing. Steady state PL spectra show a peak at ∼2.1 eV originating from Ge NCs and another peak at ∼2.3 eV arising from ion-beam induced defects in the SiO₂ matrix. Time-resolved PL studies reveal double exponential decay dynamics on the nanoseconds time scale. The faster component of the decay with a time constant τ₁∼3.1 ns is attributed to the nonradiative lifetime, since the time constant reduces with increasing defect density. The slower component with time constant τ₂∼10 ns is attributed to radiative recombination at the Ge NCs. Our results are in close agreement with the theoretically predicted radiative lifetime for small Ge NCs.     

Solid phase epitaxy of Ge films on CaF2/Si(1 1 1)

At room temperature deposited Ge films (thickness < 3 nm) homogeneously wet CaF₂/Si(1 1 1). The films are crystalline but exhibit granular structure. The grain size decreases with increasing film thickness. The quality of the homogeneous films is improved by annealing up to 200 °C. Ge films break up into islands if higher annealing temperatures are used as demonstrated combining spot profile analysis low energy electron diffraction (SPA-LEED) with auger electron spectroscopy (AES). Annealing up to 600 °C reduces the lateral size of the Ge islands while the surface fraction covered by Ge islands is constant. The CaF₂ film is decomposed if higher annealing temperatures are used. This effect is probably due to the formation of GeF_x complexes which desorb at these temperatures.     

Preparation of five-layered Si/SixGe1−x nano-films by RF helicon magnetron sputtering

Five-layered Si/Si_xGe_1−x films on Si(1 0 0) substrate with single-layer thickness of 30 nm, 10 nm and 5 nm, respectively were prepared by RF helicon magnetron sputtering with dual targets of Si and Ge to investigate the feasibility of an industrial fabrication method on multi-stacked superlattice structure for thin-film thermoelectric applications. The fine periodic structure is confirmed in the samples except for the case of 5 nm in single-layer thickness. Fine crystalline Si_xGe_1−x layer is obtained from 700 °C in substrate temperature, while higher than 700 °C is required for Si good layer. The composition ratio (x) in Si_xGe_1−x is varied depending on the applied power to Si and Ge targets. Typical power ratio to obtain x = 0.83 was 7:3, Hall coefficient, p-type carrier concentration, sheet carrier concentration and mobility measured for the sample composed of five layers of Si (10 nm)/Si_0.82Ge_0.18 (10 nm) are 2.55 × 10⁶ /°C, 2.56 × 10¹² cm⁻³, 1.28 × 10⁷ cm⁻², and 15.8 cm⁻²/(V s), respectively.     

Annealing of thin Zr films on Si1−xGex(0≤x≤1): X-ray diffraction and Raman studies

X-ray diffraction experiments have been combined with Raman scattering and transmission electron microscopy data to analyze the result of rapid thermal annealing (RTA) applied to Zr films, 16 or 80 nm thick, sputtered on Si_1−xGe_x epilayers (0≤x≤1). The C49 Zr(Si_1−xGe_x)₂ is the unique phase obtained after complete reaction. ZrSi_1−xGe_x is formed as an intermediate phase. The C49 formation temperature T_f is lowered by the addition of Ge in the structure. Above a critical Ge composition close to x=0.33, a film microstructure change was observed. Films annealed at temperatures close to T_f are continuous and relaxed. Annealing at T>T_f leads to discontinuous films: surface roughening resulting from SiGe diffusion at film grain boundaries occurred. Grains are ultimately partially embedded in a SiGe matrix. A reduction in the lattice parameters as well as a shift of Raman lines are observed as T exceeds T_f. Both Ge non-stoichiometry and residual stress have been considered as possible origins for these changes. However, as Ge segregation has never been detected, even by using very efficient techniques, it is thought that the changes originate merely from residual stress. The C49 grains are expected to be strained under the SiGe matrix effect and shift of the Raman lines would indicate the stress is compressive. Some simple evaluations of the stress values indicate that it varies between −0.3 and −3.5 GPa for 0≤x≤1 which corresponds to a strain in the range (−0.11, −1.15%). X-ray and Raman determinations are in good agreement.     

Growth and properties of magnetron cosputtering grown MnxGe1−x on Si (001)

We have grown Mn_xGe_1−x films (x=0, 0.06, 0.1) on Si (001) substrates by magnetron cosputtering, and have explored the resulting structural, morphological, electrical and magnetic properties. X-ray diffraction results show there is no secondary phase except Ge in the Mn_0.06Ge_0.94 film while new phase appears in the Mn_0.1Ge_0.9 film. Nanocrystals are formed in the Mn_0.06Ge_0.94 film, determined by field-emission scanning electron microscopy. Hall measurement indicates that the Mn_0.06Ge_0.94 film is p-type semiconductor and hole carrier concentration is 6.07×10¹⁹ cm⁻³ while the Mn_xGe_1−x films with x=0 has n-type carriers. The field dependence of magnetization was measured using alternating gradient magnetometer, and it has been indicated that the Mn_0.06Ge_0.94 film is ferromagnetic at room temperature.     

Influence of Ge on magnetic and structural properties of Joule-heated Co-based ribbons: Giant magnetoimpedance response

Studies of magnetic and structural properties of Fe_3.5Co_66.5Si_12−xGe_xB₁₈ (x=0, 3, and 6) soft magnetic ribbons obtained by melt-spinning were performed. The samples were submitted to Joule-heating treatments with different maximum current values (0.01, 0.05, 0.1, 0.2, and 0.8 A, respectively) with steps of 0.01 A and times by step of 1, 2, and 10 s). X-ray diffraction, temperature dependence of magnetization (for the as-quenched samples), coercivity and giant magnetoimpedance (GMI), measured at different frequencies (100, 500, and 900 kHz, respectively) were performed. All the samples crystallized at annealing currents higher than 0.4 A, which was consistent with the magnetic hardening of the material. Coercivities less than 1 A/m were obtained for the three samples between 0.1 and 0.2 A. Maximum value of GMI response was observed for the sample without Ge in the as-quenched state.     

Physico-chemical and electrical properties of rapid thermal oxides on Ge-rich SiGe heterolayers

Rapid thermal oxidation of high-Ge content (Ge-rich) Si_1−xGe_x (x = 0.85) layers in dry O₂ ambient has been investigated. High-resolution X-ray diffraction (HRXRD) and strain-sensitive two-dimensional reciprocal space mapping X-ray diffractometry (2D-RSM) are employed to investigate strain relaxation and composition of as-grown SiGe alloy layers. Characterizations of ultra thin oxides (∼6-8 nm) have been performed using Fourier transform infrared spectroscopy (FTIR) and high-resolution X-ray photoelectron spectroscopy (HRXPS). Formation of mixed oxide i.e., (SiO₂ + GeO₂) and pile-up of Ge at the oxide/Si_1−xGe_x interface have been observed. Enhancement in Ge segregation and reduction of oxide thickness with increasing oxidation temperature are reported. Interface properties and leakage current behavior of the rapid thermal oxides have been studied by capacitance-voltage (C-V) and current-voltage (J-V) techniques using metal-oxide-semiconductor capacitor (MOSCAP) structures and the results are reported.     

Structural and surface properties of Si1−xGex thin films obtained by reduced pressure CVD

This paper investigates the structure and surface characteristics, and electrical properties of the polycrystalline silicon-germanium (poly-Si_1−xGe_x) alloy thin films, deposited by vertical reduced pressure CVD (RPCVD) in the temperature range between 500 and 750 °C and a total pressure of 5 or 10 Torr. The samples exhibited a very uniform good quality films formation, with smooth surface with rms roughness as low as 7 nm for all temperature range, Ge mole fraction up to 32% (at 600 °C), textures of 〈2 2 0〉 preferred orientation at lower temperatures and strong 〈1 1 1〉 at 750 °C, for both 5 and 10 Torr deposition pressures. The ³¹P⁺ and ¹¹B⁺ doped poly-Si_1−xGe_x films exhibited always lower electrical resistivity values in comparison to similar poly-Si films, regardless of the employed anneal temperature or implantat dose. The results indicated also that poly-Si_1−xGe_x films require much lower temperature and ion implant dose than poly-Si to achieve the same film resistivity. These characteristics indicate a high quality of obtained poly-Si_1−xGe_x films, suitable as a gate electrode material for submicron CMOS devices.     

Annealing effects on the bonding structures, optical and mechanical properties for radio frequency reactive sputtered germanium carbide films

The effects of thermal annealing in vacuum on the bonding structures, optical and mechanical properties for germanium carbide (Ge_1−xC_x) thin films, deposited by radio frequency (RF) reactive sputtering of pure Ge(1 1 1) target in a CH₄/Ar mixture discharge, are investigated. We find that there are no significant changes in the bonding structure of the films annealed below 300 °C. The fraction of Ge-H bonds for the film annealed at temperatures (T_a) above 300 °C decreases, whereas that of C-H bonds show a decrease only when T_a exceeds 400 °C. The out-diffusion of hydrogen promotes the formation of Ge-C bonds at T_a above 400 °C and thus leads to a substantial increase in the compressive stress and hardness for the film. The refractive indices and optical gaps for Ge_1−xC_x films are almost constant against T_a, which can be ascribed to the unchanged ratios of Ge/C and sp²-C/sp³-C concentrations. Furthermore, we also find that the excellent optical transmission for an antireflection Ge_1−xC_x double-layer film on ZnS substrate is still maintained after annealing at 700 °C.     

Analysis of the Ge1−xCx films deposited by MFMST

Ge_1−xC_x films deposited by using a medium frequency magnetron sputtering technique (MFMST) were analyzed with X-ray photoelectron and Raman spectroscopy. The deposited Ge_1−xC_x films consist of C, Ge, GeC and GeO_y. The GeC content in the Ge_1−xC_x films linearly decreases, and the C content linearly increases with increasing deposition temperature from 150 to 350 °C. The GeC content decreases from 11.6% at a substrate bias of 250 V to a lowest value of 9.6% at 350 V, then increases again to 10.4% at 450 V. While the C content increases from 49.0% at the bias of 250 V to a largest value of 58.0% at 350 V and then maintains this level at 450 V. It is found that selecting a bias parameter seems more effective than deposition temperature if we want to obtain a higher content of GeC in the deposited films. In addition, a new method is presented in this paper to estimate the changes of GeC content in the Ge_1−xC_x films by observing the shifts of Ge-Ge LO phonon peak in Raman spectra for the Ge_1−xC_x films. The related mechanism is also discussed in this paper.     

Strain relaxation of epitaxial SiGe layer and Ge diffusion during Ni silicidation on cap-Si/SiGe/Si(0 0 1)

Strain relaxation of the epitaxial SiGe layer and Ge diffusion during nickel silicidation by rapid thermal annealing the structure of Ni(≅14 nm)/cap-Si(≅26 nm)/Si_0.83Ge_0.17/Si(0 0 1) at the elevated annealing temperatures, T_A, were investigated by X-ray diffraction analyses of high-resolution ω-2θ scan and reciprocal space mapping. The analyses showed a much larger strain relaxation at a lower T_A and a reduction in Ge content in the SiGe layer of Ni/SiGe/Si(0 0 1) after thermal annealing compared to the case of cap-Si/SiGe/Si(0 0 1). The results indicate that the strain relaxation of the SiGe layers in NiSi/SiGe/Si(0 0 1) is related to the phenomena of NiSi agglomeration and penetration into the SiGe layer during silicidation at elevated anneal temperatures ≥750 °C. At elevated T_A ≥ 750 °C, Ge diffused into the intact cap-Si area during silicidation.     

Positive secondary Ion emission from Si1−xGex bombarded by O2

The positive secondary ion yields of B⁺ (dopant), Si⁺ and Ge⁺ were measured for Si_1−xGe_x (0 ≤ x ≤ 1) sputtered by 5.5 keV ¹⁶O₂⁺ and ¹⁸O₂⁺. It is found that the useful yields of Ge⁺ and B⁺ suddenly drop by one order of magnitude by varying the elemental composition x from 0.9 to 1 (pure Ge). In order to clarify the role of oxygen located near surface regions, we determined the depth profiles of ¹⁸O by nuclear resonant reaction analysis (NRA: ¹⁸O(p,α)¹⁵N) and medium energy ion scattering (MEIS) spectrometry. Based on the useful yields of B⁺, Si⁺ and Ge⁺ dependent on x together with the elemental depth profiles determined by NRA and MEIS, we propose a probable surface structure formed by 5.5 keV O₂⁺ irradiation.     

Ferromagnetism in amorphous Ge1−xMnx grown by low temperature vapor deposition

Magnetic properties of amorphous Ge_1−xMn_x thin films were investigated. The thin films were grown at 373 K on (100) Si wafers by using a thermal evaporator. Growth rate was ∼35 nm/min and average film thickness was around 500 nm. The electrical resistivities of Ge_1−xMn_x thin films are 5.0×10⁻⁴∼100 Ω cm at room temperature and decrease with increasing Mn concentration. Low temperature magnetization characteristics and magnetic hysteresis loops measured at various temperatures show that the amorphous Ge_1−xMn_x thin films are ferromagnetic but the ferromagnetic magnetizations are changing gradually into paramagnetic as increasing temperature. Curie temperature and saturation magnetization vary with Mn concentration. Curie temperature of the deposited films is 80-160 K, and saturation magnetization is 35-100 emu/cc at 5 K. Hall effect measurement at room temperature shows the amorphous Ge_1−xMn_x thin films have p-type carrier and hole densities are in the range from 7×10¹⁷ to 2×10²² cm⁻³.     

Structural and magnetic properties of Si1−xGex thin films implanted with Fe ions

A series of Si_1?xGe_x (x = 1, 0.848, 0.591, 0.382, 0.209, 0.064, 0) thin films prepared by ion beam sputtering were implanted with Fe ions to different doses using the metal vapor vacuum arc technique. X-ray absorption fine structure (XAFS) was used to characterize the local microstructure around the Fe atoms in Fe-doped Si_1?xGe_x samples. Structural analysis showed that for annealed samples of Ge-rich thin films (including pure Ge) implanted with low doses of Fe ions, almost all the Fe ions substituted at Ge sites. However, an anti-ferromagnetic Fe₆Ge₅ impurity phase existed in the annealed samples implanted with high doses of Fe. It was also found that the solubility of Fe ions was highest in pure Ge films and that with increasing Si concentration, the solubility decreased. Magnetic analysis showed that for the as-implanted and annealed samples of Ge-rich thin films implanted with Fe ions, room-temperature ferromagnetism was strongest in the pure Ge series of samples and that as the Ge concentration decreased, the ferromagnetism at room temperature weakened. In addition, annealing could increase the number of Fe ions at substitution sites, which resulted in the observed increase in the saturated magnetization after annealing. Experiment and theoretical analysis showed that the ferromagnetism of Fe-doped Ge-rich Si_1?xGe_x thin films samples originated from the s, p–d exchange interactions between the Si_1?xGe_x matrix and those Fe ions which substituted at Ge sites and that the ferromagnetism was mediated by carriers.     

Fabrication of multilayered Ge nanocrystals embedded in SiOxGeNy films

Multilayered Ge nanocrystals embedded in SiO_xGeN_y films have been fabricated on Si substrate by a (Ge + SiO₂)/SiO_xGeN_y superlattice approach, using a rf magnetron sputtering technique with a Ge + SiO₂ composite target and subsequent thermal annealing in N₂ ambient at 750 °C for 30 min. X-ray diffraction (XRD) measurement indicated the formation of Ge nanocrystals with an average size estimated to be 5.4 nm. Raman scattering spectra showed a peak of the Ge-Ge vibrational mode downward shifted to 299.4 cm⁻¹, which was caused by quantum confinement of phonons in the Ge nanocrystals. Transmission electron microscopy (TEM) revealed that Ge nanocrystals were confined in (Ge + SiO₂) layers. This superlattice approach significantly improved both the size uniformity of Ge nanocrystals and their uniformity of spacing on the ‘Z’ growth direction.