Di­spiro­[fluorene‐9,5′‐[1,2,3,4]­tetra­thia­ne‐6′,9′′‐fluorene]

The tetra­thia­ne ring of the title compound, C₂₆H₁₆S₄, has a chair conformation and the mol­ecule has approximate C₂ symmetry. Each of the two fluorene ring systems is virtually planar, with the ring planes intersecting at an angle of 67.58 (5)°. This novel compound has been formed as a side product from the treatment of 9H‐fluorene‐9‐thione with methyl N‐[(benzyl­idene)­phenyl]­glycinate in the presence of LiBr and 1,6‐di­aza­bi­cyclo­[5.4.0]­un­decane.     

Dithiazolo[5,4‐b:4′,5′‐d]phosphole: A Highly Luminescent Electron‐Accepting Building Block

A family of highly emissive dithiazolo[5,4‐b:4′,5′‐d]phospholes has been designed and synthesized. The structures of two trivalent P species, as well as their corresponding P oxides, have been confirmed by X‐ray crystallography. The parent dithiazolo[5,4‐b:4′,5′‐d]phosphole oxide exhibits strong blue photoluminescence at λ_em=442 nm, with an excellent quantum yield efficiency of ?_PL=0.81. The photophysical properties of these compounds can be easily tuned by extension of the conjugation and modification of the phosphorus center. Compared with the established dithieno[3,2‐b:2′,3′‐d]phosphole system, the incorporation of electronegative nitrogen atoms leads to significantly lowered frontier orbital energy levels, as validated by both electrochemistry and theoretical calculations, thus suggesting that the dithiazolo[5,4‐b:4′,5′‐d]phospholes are valuable, air‐stable, n‐type conjugated materials. These new building blocks have been further applied to the construction of an extended oligomer with fluorene. Extension of the dithiazolophosphole core with triazole units through click reactions also provides a suitable N,N‐chelating moiety for metal binding and a representative molecular species was successfully used as a selective colorimetric and fluorescent sensor for Cu^II ions.     

Deep‐blue light‐emitting polyfluorenes containing spiro[fluorene‐9,9′‐thioxanthene‐S,S‐dioxide] isomers

Blue light‐emitting polyfluorenes, PPF‐FSOs and PPF‐SOFs were synthesized via introducing spiro[fluorene‐9,9′‐thioxanthene‐S,S‐dioxide] isomers (2,7‐diyl and 2′,7′‐diyl) (FSO/SOF) into the poly[9,9‐bis(4‐(2‐ethylhexyloxy) phenyl)fluorene‐2,7‐diyl] (PPF) backbone, respectively. With the increasing contents of FSO and SOF moieties, the absorption and PL spectra of PPF‐FSOs show slight red shift, while that of PPF‐SOFs exhibit blue shift, respectively. The HOMO and LUMO levels reduce gradually with increasing SOF unit in PPF‐SOFs. The polymers emit blue light peaked around 430–445 nm and show an excellent spectral stability with the variation in current densities. The distinctly narrowing EL spectra were observed with the incorporation of isomers in the polymers. The full width at half maximum reduced by 15 nm for PPF‐SOFs, resulting in a blue shift with the CIE coordinates from (0.16, 0.11) to (0.16, 0.08). With a device configuration of ITO/PEDOT:PSS/EML/CsF/Al, a maximum luminance efficiency (LE_max) of 2.00 cd A^?1, a maximum external quantum efficiency (EQE_max) of 3.76% with the CIE coordinates of (0.16, 0.08) for PPF‐SOF15 and a LE_max of 1.68 cd A^?1, a EQE_max of 2.38% with CIE (0.16, 0.12) for PPF‐FSO10 were obtained, respectively. The result reveals that spiro[fluorene‐9,9′‐thioxanthene‐S,S‐dioxide] isomers are promising blocks for deep‐blue light‐emitting polymers. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2332–2341     

A one‐dimensional zinc(II) coordination polymer incorporating [1,1′‐biphenyl]‐4,4′‐dicarboxylate and N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide ligands

In the title compound, catena‐poly[[[N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide]chloridozinc(II)]‐μ‐[1,1′‐biphenyl]‐4,4′‐dicarboxylato‐[[N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide]chloridozinc(II)]‐μ‐[N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide]], [Zn₂(C₁₄H₈O₄)Cl₂(C₂₆H₂₂N₄O₂)₃]_n, the Zn^II centre is four‐coordinate and approximately tetrahedral, bonding to one carboxylate O atom from a bidentate bridging dianionic [1,1′‐biphenyl]‐4,4′‐dicarboxylate ligand, to two pyridine N atoms from two N,N′‐bis(pyridin‐3‐ylmethyl)‐[1,1′‐biphenyl]‐4,4′‐dicarboxamide ligands and to one chloride ligand. The pyridyl ligands exhibit bidentate bridging and monodentate terminal coordination modes. The bidentate bridging pyridyl ligand and the bridging [1,1′‐biphenyl]‐4,4′‐dicarboxylate ligand both lie on special positions, with inversion centres at the mid‐points of their central C—C bonds. These bridging groups link the Zn^II centres into a one‐dimensional tape structure that propagates along the crystallographic b direction. The tapes are interlinked into a two‐dimensional layer in the ab plane through N—H...O hydrogen bonds between the monodentate ligands. In addition, the thermal stability and solid‐state photoluminescence properties of the title compound are reported.     

Novel hydrazone derivatives of 7‐hydroxy‐3′,3′‐dimethyl‐3′H‐spiro[chromene‐2,1′‐isobenzofuran]‐8‐carbaldehyde

The structures of new oxaindane spiropyrans derived from 7‐hydroxy‐3′,3′‐dimethyl‐3′H‐spiro[chromene‐2,1′‐isobenzofuran]‐8‐carbaldehyde (SP1), namely N‐benzyl‐2‐[(7‐hydroxy‐3′,3′‐dimethyl‐3′H‐spiro[chromene‐2,1′‐isobenzofuran]‐8‐yl)methylidene]hydrazinecarbothioamide, C₂₇H₂₅N₃O₃S, (I), at 120 (2) K, and N′‐[(7‐hydroxy‐3′,3′‐dimethyl‐3′H‐spiro[chromene‐2,1′‐isobenzofuran]‐8‐yl)methylidene]‐4‐methylbenzohydrazide acetone monosolvate, C₂₇H₂₄N₂O₄·C₃H₆O, (II), at 100 (2) K, are reported. The photochromically active C_spiro—O bond length in (I) is close to that in the parent compound (SP1), and in (II) it is shorter. In (I), centrosymmetric pairs of molecules are bound by two equivalent N—H...S hydrogen bonds, forming an eight‐membered ring with two donors and two acceptors.     

A Novel,One‐Pot Four‐Component Route to 2′‐Thioxo‐2′,3′‐dihydrospiro[indole‐3,6′‐[1,3]thiazin]‐2‐one Derivatives

An efficient route to 2′,3′‐dihydro‐2′‐thioxospiro[indole‐3,6′‐[1,3]thiazin]‐2(1H)‐one derivatives is described. It involves the reaction of isatine, 1‐phenyl‐2‐(1,1,1‐triphenyl‐λ⁵‐phosphanylidene)ethan‐1‐one, and different amines in the presence of CS₂ in dry MeOH at reflux (Scheme 1). The alkyl carbamodithioate, which results from the addition of the amine to CS₂, is added to the α,β‐unsaturated ketone, resulting from the reaction between 1‐phenyl‐2‐(1,1,1‐triphenyl‐λ⁵‐phosphanylidene)ethan‐1‐one and isatine, to produce the 3′‐alkyl‐2′,3′‐dihydro‐4′‐phenyl‐2′‐thioxospiro[indole‐3,6′‐[1,3]thiazin]‐2(1H)‐one derivatives in excellent yields (Scheme 2). Their structures were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses.     

Synthesis and Structure of 2‐Substituted Thieno[3′,2′:5,6]pyrido[4,3‐d]pyrimidin‐4(3H)‐one Derivatives

A series of new 2‐substituted 3‐(4‐chlorophenyl)‐5,8,9‐trimethylthieno[3′,2′: 5,6]pyrido[4,3‐d]pyrimidin‐4(3H)‐ones 8 were synthesized via an aza‐Wittig reaction. Phosphoranylideneamino derivatives 6a or 6b reacted with 4‐chlorophenyl isocyanate to give carbodiimide derivatives 7a or 7b , respectively, which were further treated with amines or phenols to give compounds 8 in the presence of a catalytic amount of EtONa or K₂CO₃. The structure of 2‐(4‐chlorophenoxy)‐3‐(4‐chlorophenyl)‐5,8,9‐trimethylthieno[3′,2′: 5,6]pyrido[4,3‐d]pyrimidin‐4(3H)‐one ( 8j ) was comfirmed by X‐ray analysis.     

Gold‐Catalyzed Intramolecular [3+2] Cycloadditions of 1‐Aryl‐1‐allene‐6‐enes

Treatment of 1‐aryl‐1‐allen‐6‐enes with [PPh₃AuCl]/AgSbF₆ (5 mol %) in CH₂Cl₂ at 25 °C led to intramolecular [3+2] cycloadditions, giving cis‐fused dihydrobenzo[a]fluorene products efficiently and selectively. The reactions proceeded with initial formation of trans/cis mixtures of 2‐alkyl‐1‐isopropyl‐2‐phenyl‐1,2‐dihydronaphthalene cations B, which were convertible into the desired cis‐fused cycloadducts through the combined action of a gold catalyst and a Brønsted acid. Theoretic calculation supports the participation of the trans‐B cation as reaction intermediate. Although HOTf showed similar activity towards several 1‐aryl‐1‐allen‐6‐enes, it lacks generality for this cycloaddition reaction.     

FeCl3‐Mediated Three‐Component Cascade Reaction: An Effective Approach to the Construction of Highly Functionalized Pyrrolo[1,2‐c]quinazolinones

An unexpected FeCl₃‐mediated three‐component cascade reaction has been used to construct structurally diverse pyrrolo[1,2‐c]quinazolinone derivatives with potential biological activities. This method has advantages of mild conditions, simple work‐up, as well as wide substrate scope, which makes it a powerful approach to the synthesis of diverse pyrrolo[1,2‐c]quinazolinones. This cascade reaction involves 1,3‐dipolar cycloaddition between azomethine ylides and allenoates, followed by intramolecular nucleophilic addition in the presence of FeCl₃. The obtained products could be easily transformed into derivatives with the pyrrolo[2,3‐c]quinazoline alkaloid skeleton.     

Asymmetric Hydroformylation of Vinylfurans Catalyzed by {(11bS)‐4‐{[(1R)‐2′‐Phosphino[1,1′‐binaphthalen]‐2‐yl]oxy}dinaphtho[2,1‐d:1′,2′‐f]‐ [1,3,2]dioxaphosphepin}rhodium(I) [RhI{(R,S)‐binaphos}] Derivatives

The asymmetric hydroformylation of 2‐ and 3‐vinylfurans ( 2a and 2b , resp.) was investigated by using [Rh{(R,S)‐binaphos}] complexes as catalysts ((R,S)‐binaphos = (11bS)‐4‐{[1R)‐2′‐phosphino[1,1′‐binaphthalen]‐2‐yl]oxy}dinaphtho[2,1‐d:1′,2′‐f][1,3,2]dioxaphosphepin; 1 ). Hydroformylation of 2 gave isoaldehydes 3 in high regio‐ and enantioselectivities (Scheme 2 and Table). Reduction of the aldehydes 3 with NaBH₄ successfully afforded the corresponding alcohols 5 without loss of enantiomeric purity (Scheme 3).     

Facile Access to Polycyclic Fused Azo[2,1‐b] [1,3]‐benzothiazinone via Iron‐Catalyzed Cascade Reaction

FeCl₃‐catalyzed cross‐coupling of o‐iodobenzoic acids with azole‐2‐thiols and amidation followed by in situ acidic condensation delivered azo[2,1‐b][1,3]‐benzothiazinones. A simple “one‐pot” operation is conducted for this reaction. This reaction avoids the use of expensive catalytic reagents and provides the desired products containing different azole rings and substituents in good yields.     

Further studies on polycyclic arene sulfides. Preparation and mutagenic activity of 9, 10, 10a, 11a‐tetrahydrotriphenyleno[1,2‐b]‐thiirene, 1a,2,3,10b‐tetrahydro‐5H‐thiereno[3,4]benzo[1,2‐b]fluorene and 1a,2,3,11b‐tetrahydroacenaphtho[1′,2′:6,7]naphth[1,2‐b]thiirene

The title compounds 6 , 8 and 10 , which are dihydroarene sulfides of the environmental pollutants triphenylene, benzo[b]fluorene and benzo[k]fluoranthene, have been synthesized from the corresponding epoxides and N,N‐dimethylthioformamide. The mutagenicity of the episulfides has been investigated using Salmonella typhimurium strains TA98 and TA100. While compounds 6 and 10 were mutagenic, the tetrahydrobenzo[b]fluorene episulfide 8 was inactive.     

1‐Oxa‐nido‐dodecaborate [OB11H12]− from the Controlled Oxidation of the closo‐Borates [B11H11]2− and [B12H12]2−

The closo‐dodecaborate [B₁₂H₁₂]^2? is degraded at room temperature by oxygen in an acidic aqueous solution in the course of several weeks to give B(OH)₃. The degradation is induced by Ag²⁺ ions, generated from Ag⁺ by the action of H₂S₂O₈. Oxa‐nido‐dodecaborate(1?) is an intermediate anion, that can be separated from the reaction mixture as [NBzlEt₃][OB₁₁H₁₂] after five days in a yield of 18 %. The action of FeCl₃ on the closo‐undecaborate [B₁₁H₁₁]^2? in an aqueous solution gives either [B₂₂H₂₂]^2? (by fusion) or nido‐B₁₁H₁₃(OH)^? (by protonation and hydration), depending on the concentration of FeCl₃. In acetonitrile, however, [B₁₁H₁₁]^2? is transformed into [OB₁₁H₁₂]^? by Fe³⁺ and oxygen. The radical anions [B₁₂H₁₂] ^{˙ ?} and [B₁₁H₁₁] ^{˙ ?} are assumed to be the primary products of the oxidation with the one‐electron oxidants Ag²⁺ and Fe³⁺, respectively. These radical anions are subsequently transformed into [OB₁₁H₁₂]^? by oxygen. The crystal structure analysis shows that the structure of [OB₁₁H₁₂]^? is derived from the hypothetical closo‐oxaborane OB₁₂H₁₂ by removal of the B3 vertex, leaving a non‐planar pentagonal aperture with a three‐coordinate O vertex, as predicted by NMR spectra and theory.     

An organic photochromic compound: (2S)‐2′‐ethoxy‐1,3,3‐trimethyl‐6′‐(piperidin‐1‐yl)spiro[indoline‐2,3′‐3′H‐naphtho[2,1‐b][1,4]oxazine]

In the course of our synthesis of hybrid photochromic compounds, the unexpected new organic photochromic title compound, C₂₉H₃₃N₃O₂, (I), was obtained. It is a derivative of the parent spirooxazine 1,3,3‐trimethyl‐6′‐(piperidin‐1‐yl)spiro[indoline‐2,3′‐3′H‐naphtho[2,1‐b][1,4]oxazine], (II). The 2′‐ethoxy group gives (I) different photochromic properties from its parent spirooxazine (II).     

Stereoselective Synthesis of [5‐[4,4,4,4′,4′,4′‐Hexafluoro‐N‐(2‐hydroxyethoxy)‐D‐valine]]‐ and [5‐[4,4,4,4′,4′,4′‐Hexafluoro‐N‐(2‐hydroxyethoxy)‐L‐valine]cyclosporin A

Addition of various amines to the 3,3‐bis(trifluoromethyl)acrylamides 10a and 10b gave the tripeptides 11a – 11f , mostly as mixtures of epimers (Scheme 3). The crystalline tripeptide 11f ₂ was found to be the N‐terminal (2‐hydroxyethoxy)‐substituted (R,S,S)‐ester HOCH₂CH₂O‐D ‐Val(F₆)‐MeLeu‐Ala‐O^tBu by X‐ray crystallography. The C‐terminal‐protected tripeptide 11f ₂ was condensed with the N‐terminus octapeptide 2b to the depsipeptide 12a which was thermally rearranged to the undecapeptide 13a (Scheme 4). The condensation of the epimeric tripeptide 11f ₁ with the octapeptide 2b gave the undecapeptide 13b directly. The undecapeptides 13a and 13b were fully deprotected and cyclized to the [5‐[4,4,4,4′,4′,4′‐hexafluoro‐N‐(2‐hydroxyethoxy)‐D ‐valine]]‐ and [5‐[4,4,4,4′,4′,4′‐hexafluoro‐N‐(2‐hydroxyethoxy)‐L ‐valine]]cyclosporins 14a and 14b , respectively (Scheme 5). Rate differences observed for the thermal rearrangements of 12a to 13a and of 12b to 13b are discussed.     

Synthesis of novel 1,4‐dihydropyrido[3′,2′:5,6]thiopyrano[4,3‐c]‐pyrazoles and 5H‐pyrido[3′,2′:5,6]thiopyrano[4,3‐d]pyrimidines as potential antiproliferative agents

The synthesis of new planar derivatives characterized by the presence of a pyridothiopyranopyrazole or pyridothiopyranopyrimidine nucleus, carrying a substituted aryl group, is reported. The novel 1,4‐dihydropyrido[3′,2′:5,6]thiopyrano[4,3‐c]pyrazole derivatives were obtained by condensation of 2,3‐dihydro‐3‐hydroxymethylenethiopyrano[2,3‐b]pyridin‐4(4H)‐ones with appropriate hydrazines. The preparation of 2‐substituted pyrido[3′,2′:5,6]thiopyrano[4,3‐d]pyrimidines was accomplished from the intermediate 2,3‐dihy‐dro‐3‐dimethylaminomethylenethiopyrano[2,3‐b]pyridin‐4(4H)‐ones by reaction with the appropriate binucleophile amidines. The antiproliferative activity of some new products was tested by an in vitro assay on human tumour cell lines (HL‐60 and HeLa), but none of them showed any significant effects in the tests performed. Accordingly, linear flow dichroism measurements indicated their inability to form a molecular complex with DNA.     

One‐Pot,Four‐Component Synthesis of Novel Spiro[indeno[2,1‐b]quinoxaline‐11,4′‐pyran]‐2′‐amines

A one‐pot, four‐component reaction for the efficient synthesis of novel spiro[indeno[2,1‐b]quinoxaline‐11,4′‐pyran]‐2′‐amines by using InCl₃ is described. The syntheses are achieved by reacting ninhydrin with 1,2‐diaminobenzenes to give indenoquinoxalines, which are trapped in situ by alkyl malonates and various α‐methylencarbonyl compounds through cyclization, providing multifunctionalized spiro‐substituted indeno[2,1‐b]quinoxaline‐11,4′‐pyran‐2′‐amines.     

Diethyldisulfoammonium chlorometallates as heterogeneous Brønsted–Lewis acidic catalysts for one‐pot synthesis of 14‐aryl‐7‐(N‐phenyl)‐14H‐dibenzo[a,j]acridines

A new series of Brønsted–Lewis acidic diethyldisulfoammonium chlorometallates, [DEDSA][FeCl₄] and [DEDSA]₂[Zn₂Cl₆], were synthesized as solid materials from the reaction of [(Et)₂N(SO₃H)₂][Cl] ionic liquid with transition metal chlorides (FeCl₃ and ZnCl₂) at 80 °C in neat condition for 2 h. The chlorometallates were fully characterized using various spectroscopic and analytical techniques such as Fourier transform infrared, UV–visible and Raman spectroscopies, powder X‐ray diffraction, scanning electron microscopy, energy‐dispersive X‐ray and thermogravimetric analyses, Hammett acidity and elemental analyses. Their catalytic activity was studied as reusable heterogeneous catalysts for the three‐component synthesis of novel 14‐aryl‐7‐(N‐phenyl)‐14H‐dibenzo[a,j]acridines under solvent‐free conditions at 100 °C.     

Donor/Acceptor Dihydroindeno[1,2‐a]fluorene and Dihydroindeno[2,1‐b]fluorene: Towards New Families of Organic Semiconductors

New families of donor/acceptor semiconductors based on dihydroindeno[1,2‐a]fluorene and dihydroindeno[2,1‐b]fluorene are reported. Due to the spiro bridges, this new generation of dihydroindenofluorenes allows a spatial separation of HOMO and LUMO, which retains the high E_T value of the dihydroindenofluorene backbone and excellent physical properties. This control of the electronic and physical properties has allowed a second generation of dihydroindeno[1,2‐a]fluorene to be obtained with strongly enhanced performance in green and sky‐blue phosphorescent organic light‐emitting diodes (PhOLEDs) relative to the first generation of materials. To date, this is the highest performance ever reported for a blue PhOLED by using a dihydroindenofluorene derivative. Through this structure–property relationship study, a remarkable difference of performance between syn and anti isomers has also been highlighted. This surprising behaviour has been attributed to the different symmetry of the two molecules, and highlights the importance of the geometry profiles in the design of host materials for PhOLEDs.     

Poly[aqua[μ4‐3,3′‐(diazenediyl)dibenzoato]zinc]

The solvothermal reaction of Zn(OAc)₂·2H₂O with 3,3′‐(diazenediyl)dibenzoic acid (H₂ADB) in H₂O at 393 K afforded the title complex, [Zn(C₁₄H₈N₂O₄)(H₂O)]_n. The asymmetric unit contains half a Zn^II cation, half an ADB ligand and half a water molecule. Each Zn^II centre lies on a crystallographic twofold rotation axis and is five‐coordinated by four O atoms of bridging carboxylate groups from four ADB ligands and one O atom from a water molecule, forming a distorted trigonal–bipyramidal coordination geometry. The [Zn(H₂O)] subunits are bridged by carboxylate groups to give one‐dimensional [Zn(μ‐COO)₄(H₂O)]_n chains. The chains are linked by ADB ligands into two‐dimensional sheets, and these sheets are further connected to neighbouring sheets via hydrogen bonds (OW—HW...O), forming a three‐dimensional hydrogen‐bond‐stabilized structure with an unprecedented 3⁷4¹⁷5²6² topology.