三元添加剂水溶液体系制备CaCO3空心球

利用原位聚合方法, 通过加入一定量的引发剂使甲基丙烯酸原位聚合, 在三嵌段共聚物(P123)、聚甲基丙烯酸(PMAA)和十二烷基硫酸钠(SDS)的三元添加剂混合溶液体系中成功地制备了CaCO3空心球. 采用扫描电子显微镜(SEM)和X射线粉末衍射(XRD)对合成样品的形貌、结构进行了表征. 结果显示, 方解石CaCO3空心球直径约0.5-2 μm. 空心球壁由直径约25-35 nm的圆形粒子组成, 壁厚约100-300 nm. 利用核鄄壳机理解释了空心球结构的形成过程.     

新型氧化铝空心球的制备及表征

以胶体碳球为模板, 廉价的硝酸铝为铝源, 成功制备出了新型的大小可控的氧化铝空心球. 通过透射电子显微镜(TEM)、扫描电子显微镜(SEM)、能量扩散X射线(EDX)、X射线粉末衍射(XRD)等手段对合成产品进行了表征, 并考察了不同合成条件对空心球形貌的影响. 实验结果表明, 合成的氧化铝空心球大小均一, 粒径及壁厚均可调节. 在该实验条件下, 硝酸铝浓度及吸附时间的改变对产品结果没有明显的影响, 而吸附温度的改变引起了产品表面光滑度及壁厚的改变.     

水相一步合成锐钛矿型二氧化钛空心球

报道了水相一步直接合成晶体TiO2空心球的方法. 以水溶性的过氧化钛配合物(peroxo-titanium complex, PTC)为前驱体、聚苯乙烯(polystyrene, PS)球为模板, 在水溶液体系中可直接制备得到锐钛矿型纳米TiO2空心球. 与传统的模板法相比, 模板的包覆、去除及TiO2壳层的晶化等步骤在水相中可一步完成. 利用透射电子显微镜(TEM)、扫描电子显微镜(SEM)、X射线衍射仪(XRD)及热重分析仪(TGA)对所合成的纳米TiO2空心球进行了表征, 同时推断了可能的反应机理.     

类胆碱离子液体中多级结构Bi_2S_3的形貌调控合成

本文通过简单温和的溶液合成方法,在类胆碱离子液体体系中制备了纳米线簇、绒球状、海胆状和纳米花状等不同形貌可控的Bi_2S_3纳米材料.通过X射线粉末衍射(XRD)、扫描电子显微镜(SEM)和电子透射电镜(TEM)对样品的形貌与结构进行了分析表征.实验结果表明,IL/H_2O/PEG-200的比例在调控不同形貌的Bi_2S_3形成过程中起到了决定性的作用.同时也研究了离子液体阳离子烷基侧链的长度和反应时间对样品形貌形成过程的影响.基于晶体分裂和溶解-重结晶过程对不同形貌Bi_2S_3样品的形成机理进行了分析讨论.     

空心ZnMn2O4纳米球和纳米立方体的室温合成及氧还原催化性能

室温条件下,在含有Zn2+的溶液中,以空心结构的MnO2作为前驱体,使用NaBH4作为还原剂,合成了尖晶石型的ZnMn2O4纳米空心球和纳米空心立方体. 通过XRD,SEM,TEM,BET等测试手段对合成产物的结构、形貌、组成、表面性质进行了表征. 实验结果表明,所制备的空心结构ZnMn2O4纳米球和纳米立方体的尺寸在400?600 nm, 空心结构的壳层是由5?6 nm颗粒紧密堆积而形成,厚度约为40 nm. 将所制备的纳米ZnMn2O4空心结构应用于氧还原（ORR）反应中,研究了其在碱性溶液中的氧还原电催化性能,结果显示,相对于ZnMn2O4纳米空心立方体,ZnMn2O4纳米空心球在氧还原反应中表现出较大的电流密度和高的电子转移数 (n=3.5), 具有较好的氧还原电催化性能,有望成为一种新型的氧还原电极电催化剂.     

双盘状ZnO的可控制备

采用水热法制备了形貌可控、 尺寸均一的双盘状ZnO. X射线粉末衍射(XRD)、 扫描电子显微镜(SEM)及透射电子显微镜(TEM)等测试结果表明, 制备的ZnO具有六方纤锌矿结构, 由2个直径约为4 μm, 厚度约为600 nm的圆盘复合而成. 考察了反应温度和乙酸锌与柠檬酸钾的摩尔比对产物形貌与尺寸的影响, 实现了双盘状ZnO的可控合成, 并初步探讨了其形成机理. 荧光光谱显示, 双盘状ZnO的紫外发射峰半高宽约为10 nm, 比块体ZnO的紫外发射峰半高宽(18 nm)窄, 表明双盘状ZnO具有更好的光学特性.     

水热法合成AgInS2/ZnS核/壳结构量子点及其荧光性能

以硫脲为硫源,采用谷胱甘肽(GSH)和柠檬酸钠(SC)为配体,通过水热法制备了水溶性AgInS2/ZnS(AIS/ZnS)核/壳结构量子点。系统研究了反应温度和配体用量对量子点的合成及其荧光性能的影响。采用X射线衍射(XRD)、透射电子显微镜(TEM)、紫外可见吸收光谱(UV-Vis)和光致发光光谱(PL)分别对量子点的物相、形貌和光学性能进行了表征,并考察了量子点的稳定性。实验结果表明,随着反应温度从70℃升高至90℃,促进了ZnS壳层的形成,有效地钝化了量子点的表面缺陷,获得的AIS/ZnS核/壳量子点的发光强度显著提高,发光峰位从600 nm蓝移至580 nm。配体的添加可以有效地平衡Zn^2+的化学反应活性,减缓ZnS壳层的生长,抑制核壳界面缺陷的形成,还能消除量子点的表面态,当nGSH/nZn^2+=2.0,nSC/nZn^2+=2.5时,AIS/ZnS量子点的荧光性能最佳。此外,AIS/ZnS核/壳结构量子点还具有优异的光学稳定性。     

阴离子氨基酸表面活性剂调控下水热合成羟基磷灰石纳米片

利用水热合成方法, 在含有氨基酸结构的阴离子表面活性剂N-酰基十二烷基肌氨酸钠(Sar-Na)的控制下, 合成具有较大长径比(aspect ratio)的片状纳米羟基磷灰石晶体. 采用扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线衍射(XRD)和傅立叶变换红外(FTIR)光谱表征, 并分析了合成产物的形貌、结构和组成. 结果表明, 在Sar-Na的调控下合成了长度0.5-1.0 μm、宽约30 nm的片状羟基磷灰石晶体, 其长径比约为20:1. 考察了表面活性剂Sar-Na的用量对羟基磷灰石形貌的影响. 随着Sar-Na的添加及用量的增加, 羟基磷灰石由椭圆形变为长片状, 并且片的两端逐渐变尖. 结果显示了Sar-Na对羟基磷灰石形貌的控制作用, 为合成具有较大长径比的羟基磷灰石纳米片提供了一个新的途径.     

胶态磁组装光子晶体及其离子强度响应

采用细乳液聚合方法合成了聚合物包覆的磁性复合纳米粒子(MCNPs),通过磁场诱导组装制备得到胶态磁组装光子晶体(CMA-PCs).透射电子显微镜(TEM)和扫描电子显微镜(SEM)表征结果表明,MCNPs具有规整的球形形貌和明显的核壳结构,并且单分散性较好,平均粒径为112 nm,聚合物壳层厚约10 nm.MCNPs在外界磁场的作用下可以快速(1 s)组装形成光子晶体结构.当离子强度在0.03~0.75 mmol/L范围内变化时,CMA-PCs的衍射色呈现从橙红色到紫色的变化,反射波长从607 nm蓝移至434 nm,并且离子强度的响应在10 s内即可达到平衡,表明制得的CMA-PCs可以作为化学传感器应用于离子强度的半定量检测,并且具有简便、快速及裸眼可视化检测的优点.     

NaOH溶液中CdS纳米棒的水热合成

在NaOH溶液中水热合成了CdS纳米棒, 并探讨了NaOH溶液浓度和反应时间对CdS纳米棒形貌及晶体结构的影响及其可能的生长机理和母液循环可行性. 用粉末X射线衍射(XRD)、 扫描电子显微镜(SEM)、 透射电子显微镜(TEM)、 高分辨透射电子显微镜(HRTEM)和选区电子衍射(SAED)对CdS纳米棒进行了表征, 并考察了其在可见光照射下光催化降解亚甲基蓝的活性. 结果表明, NaOH溶液是形成棒状形貌的关键因素. 在最优实验条件下, 可获得六方纤锌矿结构CdS纳米棒, 直径约200 nm, 长度可达4 μm. 该纳米棒具有良好的可见光光催化活性.     

PAMAM树形分子为模板低温制备纳米硫化锌空心球

Hollow ZnS spheres have been prepared in the presence of generation 3.5 poly (amidoamine) dendrimers with surface ester groups (G3.5-COOCH3 PAMAM dendrimer) as synthetic matrix template. The products obtained were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and UV-Vis absorption. TEM studies show that the hollow spheres with diameters ranging from 80 to 100 nm are prepared. The range of wall thickness was estimated to be about 20～30 nm. It was found that the concentration of PAMAM dendrimer had a significant influence on the formation of hollow ZnS spheres. The possible formation mechanism of the hollow spherical structure is also discussed.     

Chelating ligand-mediated synthesis of hollow ZnS microspheres and its optical properties

Monodispersed hollow ZnS microspheres have been successfully synthesized by a facile ethylenediamine tetraacetic acid (EDTA) mediated hydrothermal route. The sizes of the hollow spheres vary from 1.5 to 3.5 microm when the reaction temperature varied from 130 to 230 degrees C. The formation of these hollow spheres is attributed to the oriented aggregation of ZnS nanocrystals around the gas-liquid interface between H(2)S and water. EDTA plays important role as chelating ligand and capping reagent, which regulates the release of Zn(2+) ions for the formation of ZnS hollow spheres. The products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-vis spectroscopy, photoluminescence, and Raman spectroscopy. The obtained ZnS hollow spheres show a sharp and photostable UV emission approximately 370 nm, which is attributed to the recombination process associated with interstitial sulfur vacancy.     

dl‐Aspartic Acid‐Mediated Hydrothermal Synthesis of β‐ZnS Microspheres and Their Optical Properties

ZnS hollow microspheres were synthesized by a dl ‐aspartic acid mediated hydrothermal route. dl ‐aspartic acid plays an important role as crystal growth soft template, which regulates the release of Zn²⁺ ions for the formation of ZnS hollow spheres. The formation of these hollow spheres was mainly attributed to an Ostwald ripening process. The products were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), electron diffraction (ED), UV/Vis spectroscopy (UV), and photoluminescence (PL). The shells of the microspheres were composed of ZnS quantum dots (QDs) with the average size of 2.31 nm. The average microspheres diameter is 0.5–3.5 μm. The shell thickness of the hollow sphere is ≈?300 nm. The optical bandgap energy increased significantly compared to the bulk ZnS material due to the strong quantum confinement effect. Two strong emissions at ≈?425 nm and ≈?472 nm in the photoluminescence (PL) spectrum of ZnS hollow microspheres indicate strong quantum confinement because of the presence of QDs.     

可自去除模板法制备环境响应性PNIPAM空心微球

本文采用可自去除模板法制备了单分散的聚（N-异丙基丙烯酰胺） （PNIPAM）空心微球, 用透射电子显微镜（TEM）研究了不同工艺条件对微球尺寸和形貌的影响机制. 结果表明, 酸性单体甲基丙烯酸（MAA）的加入量决定了PNIPAM微球空腔的形成速度; 而MAA及表面活性剂十二烷基硫酸钠（SDS）的加入量对空心微球的粒径及空腔大小亦有明显影响. 具体地讲, 当MAA的浓度从1.06 mmol/L增加到4.24 mmol/L时, 空心微球的平均粒径从250 nm左右增加到约450 nm, 内部空腔尺寸从40 nm增加到270 nm; 而当SDS的浓度从0增加到0.62 mmol/L时, 空心微球的平均粒径及内部空腔尺寸分别从450和270 nm降低到320和130 nm. 紫外分光光度计和动态光散射的检测结果显示, 所得PNIPAM空心微球具有受pH控制的温度敏感性.     

Highly sensitive WO3 hollow-sphere gas sensors

In this paper, we describe how WO(3) hollow spheres have been synthesized in solution phase by the controlled hydrolysis of WCl(6) using novel carbon microspheres as the templates. All of the products were characterized by X-ray powder diffraction (XRD), scanning electronic microscopy (SEM), and transmission electron microscopy (TEM). The as-synthesized spheres had large diameters of about 400 nm and thin shells of about 30 nm composed of numerous small nanocrystals. Prompted by the porous structure and small crystal size of the shell wall, we constructed WO(3) hollow-sphere gas sensors and found that these sensors had good sensitivity to alcohol, acetone, CS(2), and other organic gases.     

硫化锌纳米空心球：合成及光学性质研究

Cubic ZnS hollow nanospheres have been prepared by a simple and template-free solvothermal method. The reaction was accomplished between Zn powder and the in-situ prepared S8. The results of X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) show that the ZnS hollow spheres are composed of ultrafine nanoparticles. The average diameters of the hollow nanospheres are about 100 nm. Their photoluminescence (PL) spectra indicate that they have excellent optical properties.     

ZnS:Mn2+/聚苯乙烯核壳及ZnS:Mn2+中空球的制备和光谱性质

ZnS:Mn2+ polystyrene (PS) core-shell structures and ZnS:Mn2+ hollow spheres were prepared by a sonoehemical deposition approach. Transmission electron micrograph (TEM) studies show that the PS surface is covered by a thin shell consisted of ZnS: Mn2+ nanoparticles with an average size of 9 nm. ZnS: Mn2+ hollow spheres were obtained by heating the core-shell particles in air at 500 ℃ to drive off PS. The photoluminescence spectrum for the emission band of Mn2+ peaked at 540 nm, and a 45 nm blue shift compared to that of corresponding bulk sample, was discussed based on the Mn-O octahedral distortion induced by shell structure.     

Surfactant-assistant and facile synthesis of hollow ZnS nanospheres

Small and monodisperse ZnS hollow nanospheres with outer diameter ranging from 60 to 70 nm and wall thickness of 15-20 nm were fabricated in a large scale by a simple surfactant polyethylene glycol (PEG) assisted method. The diameter and the wall thickness of the hollow nanospheres could be controlled by manipulating the amount of PEG and the aging time, respectively. Moreover, the wall of these hollow nanospheres is very compact. The product was characterized by X-ray power diffraction (XRD), transmission electron microscopy (TEM), UV-vis spectrum and fluorescence spectroscopy. The photocatalytic activity of as-prepared ZnS hollow nanospheres was also evaluated by using methyl orange (MO) as a model organic compound and the result revealed that their photocatalytic activity is a little lower than that of Degussa P25 TiO(2) but better than that of ZnS nanocrystals prepared by literature method. Furthermore, a rational mechanism to the formation and evolution of the products is proposed.     

Fabrication and photocatalytic properties of SnO2 double-shelled and triple-shelled hollow spheres

SnO₂ double-shelled and triple-shelled hollow spheres were tailored by adjusting concentration of tin (IV) chloride solution during the process of the tin (IV) ions infused carbonaceous spheres. The structures of these SnO₂ multi-shelled hollow spheres were examined by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and their possible formation mechanism were also discussed. In virtue of triple-shelled hollow porous structure and higher specific surface area, SnO₂ triple-shelled hollow spheres exhibited enhanced photocatalytic properties compared to SnO₂ double-shelled hollow spheres.