Unambiguous detection of target DNAs by excimer-monomer switching molecular beacons

A new class of molecular beacons were developed in which pyrene fluorophores were connected both at 3' and 5' ends of a single-stranded oligonucleotide. The two pyrene-based fluorophores were synthesized from the same starting material, so that the preparation of the beacons was simplified. The detection strategy of the beacons for target DNAs is based on "excimer-monomer emission switching" of the pyrene fluorophores: excimer emission of the pyrene moieties changed to monomer one when the beacons hybridized with the targets. This type of two-state mode of fluorescence allows unambiguous detection of the target DNAs because strict 1:1 correlation between the nonhybridized and the hybridized beacons can be monitored by the presence of isoemissive points of the fluorescence changes. The beacons can detect target 19-mer DNAs and can discriminate the targets from their single-nucleotide mismatches at 1 nM concentration. Advantages of the excimer-monomer switching molecular beacons were discussed in comparison with conventional ones.     

Protease Probes that Enable Excimer Signaling upon Scission

Peptide‐based probes that fluoresce upon proteolytic cleavage are invaluable tools for monitoring protease activity. The read‐out of protease activity through pyrene excimer signaling would be a valuable asset because the large Stokes shift and the long lifetime of the excimer emission facilitate measurements in autofluorescent media such as blood serum. However, proteolytic cleavage abolishes rather than installs the proximity relationships required for excimer signaling. Herein, we introduce a new probe architecture to enable the switching on of pyrene excimer emission upon proteolytic scission. The method relies on hairpin‐structured peptide nucleic acid (PNA)/peptide hybrids with pyrene units and anthraquinone‐based quencher residues positioned in a zipper‐like arrangement within the PNA stem. The excimer hairpin peptide beacons afforded up to a 50‐fold enhancement of the pyrene excimer emission. Time‐resolved measurements allowed the detection of matrix metalloprotease 7 in human blood serum.     

Molecular Engineering of DNA: Molecular Beacons

Molecular beacons (MBs) are specifically designed DNA hairpin structures that are widely used as fluorescent probes. Applications of MBs range from genetic screening, biosensor development, biochip construction, and the detection of single‐nucleotide polymorphisms to mRNA monitoring in living cells. The inherent signal‐transduction mechanism of MBs enables the analysis of target oligonucleotides without the separation of unbound probes. The MB stem–loop structure holds the fluorescence‐donor and fluorescence‐acceptor moieties in close proximity to one another, which results in resonant energy transfer. A spontaneous conformation change occurs upon hybridization to separate the two moieties and restore the fluorescence of the donor. Recent research has focused on the improvement of probe composition, intracellular gene quantitation, protein–DNA interaction studies, and protein recognition.     

Capillary electrophoresis and fluorescence studies on molecular beacon-based variable length oligonucleotide target discrimination

Molecular beacons (MBs) are oligonucleotide probes having a compact hairpin structure, with a fluorophore attached to one end and a quencher molecule attached to the other end. In its native state, the fluorophore is quenched by virtue of its proximity to the quencher molecule. Upon hybridization with its complementary oligonucleotide target, fluorescence is elicited due to a conformational change that results in separation of the fluorophore and quencher molecule. The present study describes the hybridization interaction of an MB to various complementary target sequences. The effects of temperature and length of complementary target sequences on hybridization were investigated using capillary electrophoresis and solution-based fluorescence techniques. Hybridization efficiency was dependent on the ability of the target sequences to destabilize the stem region by binding directly to the stem region. Optimal hybridization occurred between 40 and 50 degrees C for all targets tested, with the true target forming a more stable hybrid complex.     

Molecular beacons for bioanalytical applications

Molecular beacons (MBs) are hairpin-shaped oligonucleotides that contain both fluorophore and quencher moieties. They act like switches and are normally in a closed state, when the fluorophore and the quencher are brought together to turn "off" the fluorescence. When prompted to undergo conformational changes that open the hairpin structure, the fluorophore and the quencher are separated, and fluorescence is turned "on." This Education will outline the principles of MBs and discuss recent bioanalytical applications of these probes for in vitro RNA and DNA monitoring, biosensors and biochips, real-time monitoring of genes and gene expression in living systems, as well as the next generation of MBs for studies on proteins, the MB aptamers. These important applications have shown that MBs hold great potential in genomics and proteomics where real-time molecular recognition with high sensitivity and excellent specificity is critical.     

Quencher-free molecular beacons: a new strategy in fluorescence based nucleic acid analysis

Molecular beacons (MBs) have been used as viable fluorescent probes in nucleic acid analysis. Many researchers around the world continue to modify the MBs to suit their needs. As a result, a number of nucleic acid probing systems with close resemblance to the MBs are being reported from time to time. Quencher-free molecular beacons (QF-MBs) are a significant modification of the conventional MB; in QF-MBs the quencher part has been eliminated. Despite the absence of the quencher, the QF-MBs can identify specific target DNA. They can also be used in SNP typing and in real-time PCR analysis for quantification of DNAs. The design, factors behind functioning and applications of different types of QF-MBs and closely related quencher-free nucleic acid probing systems (QF-NAPs) have been described in this tutorial review.     

Highly fluorescent conjugated pyrenes in nucleic acid probes: (phenylethynyl)pyrenecarbonyl-functionalized locked nucleic acids

In recent years, fluorescently labeled oligonucleotides have become a widely used tool in diagnostics, DNA sequencing, and nanotechnology. The recently developed (phenylethynyl)pyrenes are attractive dyes for nucleic acid labeling, with the advantages of long-wave emission relative to the parent pyrene, high fluorescence quantum yields, and the ability to form excimers. Herein, the synthesis of six (phenylethynyl)pyrene-functionalized locked nucleic acid (LNA) monomers M(1)-M(6) and their incorporation into DNA oligomers is described. Multilabeled duplexes display higher thermal stabilities than singly modified analogues. An increase in the number of phenylethynyl substituents attached to the pyrene results in decreased binding affinity towards complementary DNA and RNA and remarkable bathochromic shifts of absorption/emission maxima relative to the parent pyrene fluorochrome. This bathochromic shift leads to the bright fluorescence colors of the probes, which differ drastically from the blue emission of unsubstituted pyrene. The formation of intra- and interstrand excimers was observed for duplexes that have monomers M(1)-M(6) in both complementary strands and in numerous single-stranded probes. If more phenylethynyl groups are inserted, the detected excimer signals become more intense. In addition, (phenylethynyl)pyrenecarbonyl-LNA monomers M(4), M(5), and M(6) proved highly useful for the detection of single mismatches in DNA/RNA targets.     

Multilabeled pyrene-functionalized 2'-amino-LNA probes for nucleic acid detection in homogeneous fluorescence assays

Homogeneous fluorescence assays for detection of nucleic acids are widely used in biological sciences. Typically, probes such as molecular beacons that rely on distance-dependent fluorescence quenching are used for such assays. Less attention has been devoted to tethering a single kind of fluorophores to oligonucleotides and exploiting hybridization-induced modulation of fluorescence intensity for nucleic acid detection. Herein, thermal denaturation experiments and fluorescence properties of oligodeoxyribonucleotides containing one or more 2'-N-(pyren-1-yl)carbonyl-2'-amino-LNA monomer(s) X are described. These pyrene-functionalized 2'-amino-LNAs display large increases in thermal stability against DNA/RNA complements with excellent Watson-Crick mismatch discrimination. Upon duplex formation of appropriately designed 2'-N-(pyren-1-yl)carbonyl-2'-amino-LNA probes and complementary DNA/RNA, intensive fluorescence emission with quantum yields between 0.28 and 0.99 are observed. Quantum yields of such magnitudes are unprecedented among pyrene-labeled oligonucleotides. Molecular modeling studies suggest that the dioxabicyclo[2.2.1]heptane skeleton and amide linkage of monomer X fix the orientation of the pyrene moiety in the minor groove of a nucleic acid duplex. Interactions between pyrene and nucleobases, which typically lead to quenching of fluorescence, are thereby reduced. Duplexes between multiple modified probes and DNA/RNA complements exhibit additive increases in fluorescence intensity, while the fluorescence of single stranded probes becomes increasingly quenched. Up to 69-fold increase in fluorescence intensity (measured at lambda(em) = 383 nm) is observed upon hybridization to DNA/RNA. The emission from duplexes of multiple modified probes and DNA/RNA at concentrations down to less than 500 nM can easily be seen by the naked eye using standard illumination intensities.     

NUCLEIC ACID HYBRIDIZATION ACCOMPANIED WITH EXCIMER FORMATION FROM TWO PYRENE-LABELED PROBES

Abstract— We developed a novel nucleic acid hybridization method based on excimer formation. We used two different 16-mer oligonucleotide probes that had a combined continuous-sequence run that was complementary to a target 32-mer. Prior to hybridization, the adjacent terminal ends (i.e. the 3'-terminal of one probe and the 5'-terminal of the other probe) were each labeled with one pyrene residue. When these probes simultaneously hybridized to the target, a 495 nm broad fluorescence band was produced. The intensity of this band increased as the intensity of the pyrene monomer bands decreased, indicating that the 495 nm band was attributed to the pyrene excimer. The excimer fluorescence, easily differentiated from the monomer bands for emission wavelength, opens up a new way to perform homogeneous hybridization assays and in vivo imaging of nucleic acids.     

Self-quenching smart probes as a platform for the detection of sequence-specific UV-induced DNA photodamage

Molecular beacons (MBs) are sensitive probes for many DNA sequence-specific applications, such as DNA damage detection, but suffer from technical and cost limitations. We have designed smart probes with self-quenching properties as an alternative to molecular beacons to monitor sequence-specific UV-induced photodamage of oligonucleotides. These probes have similar stem-loop structural characteristics as molecular beacons, but quenching is achieved instead via photoinduced intramolecular electron transfer by neighboring guanosine residues. Our results indicate that the probes are sensitive enough to detect nanomolar target concentrations and are specific enough to discriminate single-base damage. When the probes were used to monitor UV-induced photodamage in oligonucleotide sequences that differ by a single-base mismatch, the photodamage time constant was higher for the perfectly complementary target sequences than for the mismatch sequences, indicating that these probes are specific for each target sequence. In addition, time constants obtained for oligonucleotide target sequences with both stem and loop base mismatches are lower than those with only loop mismatches, suggesting that these sequences are also specifically distinguished by the smart probes. These probes thus constitute robust, sensitive, specific, and cheaper alternatives to MBs for sequence-specific DNA damage detection.     

基于滚环合成的聚分子信标用于 凝血酶的靶向检测

采用滚环扩增(RCA)合成得到的DNA长链打开带适配体的分子信标, 由于RCA长链上带有多个与分子信标(MB)互补的重复序列, 其打开分子信标的能力比单一互补短链提高了上百倍. 所形成的聚多价分子信标组装体, 在分子信标浓度相同的情况下, 打开后的荧光强度也大幅上升; 并且由于组装体上多价适配体的存在, 聚分子信标对凝血酶的靶向能力显著增强. 实验结果表明, 聚分子信标结合凝血酶后, 其荧光信号与凝血酶浓度呈线性关系, 检测灵敏度达到0.2 nmol/L, 该体系的构建有利于实现对凝血酶的高灵敏、 特异性检测.     

Label-free detection of polynucleotide single-base mismatch via pyrene probe excimer emission

The pyrene probe and pyrene-labeled oligonucleotides (ODNs) probe are expected to be candidates as fluorescent probe for DNA assay. In particular, label-free detection is a very hot because of its simpleness, speediness and cheapness. Herein, we have investigated the use of a pyrenylakylammonium salt, a novel fluorescent probe for the detection of one single nucleotide polymorphism (SNP) in double stranded DNA. After S1 nuclease digestion, the pyrene probes bind electrostatically to the perfect complement DNA and emit a strong excimer emission. However, treatment of the non-complementary DNA with S1 nuclease caused nucleotide fragments of less than 5 bases, which could not induce excimer emission. By comparing ratio of excimer to monomer fluorescence between normal and mutant DNA after S1 nuclease digestion, One-base mutation in DNA was detected easily. This new method may be applied to the detection of SNP.     

Dual pyrene-labeled pyrrolidinyl peptide nucleic acid as an excimer-to-monomer switching probe for DNA sequence detection

The unique ability of pyrene to form excimers with distinct emission characteristic from monomer offers an attractive means to signal the interactions between biomolecules. In this work, dual pyrene-labeled pyrrolidinyl peptide nucleic acid probe with a d-prolyl-2-aminocyclopetanecarboxylic acid α,β-dipeptide backbone (acpcPNA) was designed as an excimer-to-monomer switching probe for DNA sequence detection. In single stranded state, the excimer emission at 470 nm was mainly observed in the fluorescence spectrum. In the presence of DNA target, the hybridization resulted in separation of the two pyrene units, therefore the spectrum displayed increased monomer emission at 380 nm with concomitant decreased excimer emission. Switching ratio, which is defined as the ratio of the monomer to excimer in the double stranded form [F₃₈₀/F₄₇₀(ds)] divided by the same value obtained from the single stranded form [F₃₈₀/F₄₇₀(ss)], was used to describe the performance of the probes. Switching ratios in the range of 5–30 were observed with various dual pyrene-labeled acpcPNA probes bearing pyrenebutyryl label attached five-base apart. Practically no excimer-to-monomer switching behavior was observed with DNA targets carrying a single mismatched base as shown by the small switching ratios of ∼1.     

Pyrene-labeled oligodeoxynucleotide probe for detecting base insertion by excimer fluorescence emission

Novel ODN probes for insertion polymorphism detection have been devised. The ODN probes labeled with two pyrene chromophores emit strong excimer fluorescence when hybridized with DNA containing one inserted base. This method is useful for the determination of the presence/absence of insertion polymorphisms located at a specific site on the target DNA.     

Quadruplex-based molecular beacons as tunable DNA probes

Molecular beacons (MBs) are fluorescent nucleic acid probes with a hairpin-shaped structure in which the 5' and 3' ends are self-complementary. Due to a change in their emissive properties upon recognition with complementary sequences, MBs allow the diagnosis of single-stranded DNA or RNA with high mismatch discrimination, in vitro and in vivo. Whereas the stems of MB hairpins usually rely on the formation of a Watson-Crick duplex, we demonstrate in this report that the preceding structure can be replaced by a G-quadruplex motif (G4). Intramolecular quadruplexes may still be formed with a central loop composed of 12 to 21 bases, therefore extending the sequence repertoire of quadruplex formation. G4-MB can efficiently be used for oligonucleotide discrimination: in the presence of a complementary sequence, the central loop hybridizes and forms a duplex that causes opening of the quadruplex stem. The corresponding G4-MB unfolding can be detected by a change in its fluorescence emission. We discuss the thermodynamic and kinetic opportunities that are provided by using G4-MB instead of traditional MB. In particular, the intrinsic feature of the quadruplex motif facilitates the design of functional molecular beacons by independently varying the concentration of monovalent or divalent cations in the medium.     

Polyfluorophore Labels on DNA: Dramatic Sequence Dependence of Quenching

We describe studies carried out in the DNA context to test how a common fluorescence quencher, dabcyl, interacts with oligodeoxynucleoside fluorophores (ODFs)—a system of stacked, electronically interacting fluorophores built on a DNA scaffold. We tested twenty different tetrameric ODF sequences containing varied combinations and orderings of pyrene (Y), benzopyrene (B), perylene (E), dimethylaminostilbene (D), and spacer (S) monomers conjugated to the 3′ end of a DNA oligomer. Hybridization of this probe sequence to a dabcyl‐labeled complementary strand resulted in strong quenching of fluorescence in 85 % of the twenty ODF sequences. The high efficiency of quenching was also established by their large Stern–Volmer constants (K_SV) of between 2.1×10⁴ and 4.3×10⁵ M ^?1, measured with a free dabcyl quencher. Interestingly, quenching of ODFs displayed strong sequence dependence. This was particularly evident in anagrams of ODF sequences; for example, the sequence BYDS had a K_SV that was approximately two orders of magnitude greater than that of BSDY, which has the same dye composition. Other anagrams, for example EDSY and ESYD, also displayed different responses upon quenching by dabcyl. Analysis of spectra showed that apparent excimer and exciplex emission bands were quenched with much greater efficiency compared to monomer emission bands by at least an order of magnitude. This suggests an important role played by delocalized excited states of the π stack of fluorophores in the amplified quenching of fluorescence.     

Dual fluorophore PNA FIT-probes - extremely responsive and bright hybridization probes for the sensitive detection of DNA and RNA

Fluorescently labeled oligonucleotides are commonly employed as probes to detect specific DNA or RNA sequences in homogeneous solution. Useful probes should experience strong increases in fluorescent emission upon hybridization with the target. We developed dual labeled peptide nucleic acid probes, which signal the presence of complementary DNA or RNA by up to 450-fold enhancements of fluorescence intensity. This enabled the very sensitive detection of a DNA target (40 pM LOD), which was detectable at less than 0.1% of the beacon concentration. In contrast to existing DNA-based molecular beacons, this PNA-based method does not require a stem sequence to enforce dye-dye communication. Rather, the method relies on the energy transfer between a "smart" thiazole orange (TO) nucleotide, which requires formation of the probe-target complex in order to become fluorescent, and terminally appended acceptor dyes. To improve upon fluorescence responsiveness the energy pathways were dissected. Hydrophobic, spectrally mismatched dye combinations allowed significant (99.97%) decreases of background emission in the absence of a target. By contrast, spectral overlap between TO donor emission and acceptor excitation enabled extremely bright FRET signals. This and the large apparent Stokes shift (82 nm) suggests potential applications in the detection of specific RNA targets in biogenic matrices without the need of sample pre-processing prior to detection.     

Self-assembled nanoparticle probes for recognition and detection of biomolecules

Colloidal gold nanocrystals have been used to develop a new class of nanobiosensors that is able to recognize and detect specific DNA sequences and single-base mutations in a homogeneous format. At the core of this biosensor is a 2.5-nm gold nanoparticle that functions as both a nano-scaffold and a nano-quencher (efficient energy acceptor). Attached to this core are oligonucleotide molecules labeled with a thiol group at one end and a fluorophore at the other. This hybrid bio/inorganic construct is found to spontaneously assemble into a constrained arch-like conformation on the particle surface. Binding of target molecules results in a conformational change, which restores the fluorescence of the quenched fluorophore. Unlike conventional molecular beacons with a stem-and-loop structure, the nanoparticle probes do not require a stem, and their background fluorescence increases little with temperature. In comparison with the organic quencher Dabcyl (4,4'-dimethylaminophenyl azo benzoic acid), metal nanoparticles have unique structural and optical properties for new applications in biosensing and molecular engineering.     

Carbon nanotube-quenched fluorescent oligonucleotides: probes that fluoresce upon hybridization

We report an effective, novel self-assembled single-wall carbon nanotube (SWNT) complex with an oligonucleotide and demonstrate its feasibility in recognizing and detecting specific DNA sequences in a single step in a homogeneous solution. The key component of this complex is the hairpin-structured fluorescent oligonucleotide that allows the SWNT to function as both a "nanoscaffold" for the oligonucleotide and a "nanoquencher" of the fluorophore. Given this functionality, this carbon nanotube complex represents a new class of universal fluorescence quenchers that are substantially different from organic quenchers and should therefore have many applications in molecular engineering and biosensor development. Competitive binding of a DNA target and SWNTs with the oligonucleotide results in fluorescence signal increments relative to the fluorescence without a target as well as in marked fluorescence quenching. In contrast to the common loop-and-stem configuration of molecular beacons (MBs), this novel fluorescent oligonucleotide needs only one labeled fluorophore, yet the emission can be measured with little or no background interference. This property greatly improves the signal-to-background ratio compared with those for conventional MBs, while the DNA-binding specificity is still maintained by the MB. To test the interaction mechanisms of the fluorescent oligonucleotide with SWNTs and target DNA, thermodynamic analysis and fluorescence anisotropy measurements, respectively, were applied. Our results show that MB/SWNT probes can be an excellent platform for nucleic acid studies and molecular sensing.