Compounds with π(loc) → π*(deloc) electronic transitions and their solvatochromism

Molecular structures possessing atomic sites that contribute a non‐bonding electron pair to their π system (e.g. nitrogen atoms with sp² hybridization in pyrroles and anilines) usually exhibit a first absorption band whose solvatochromism is, surprisingly, sensitive only to the polarizability of the medium even though they are dipolar. As shown here, this solvatochromic behavior is a result of the first electronic transition in these compounds occurring from a substantially localized π orbital to a substantially delocalized π* orbital in the molecular structure. The high electronic delocalization present leads to a marked bathochromic band shift as the polarizability of the medium increases. It is especially relevant that this solvatochromism, which is because of the polarizability of the medium, explains the spectral shift that is only because of the redistribution of the electrons of the solvent molecules. It is important to take into account that this electronic redistribution happens instantaneously in this process. Copyright © 2015 John Wiley & Sons, Ltd.     

Mechanistic study on Mo(CO)6‐catalyzed intramolecular [2 + 2] or [2 + 2 + 1] cycloaddition reaction of 5‐allenyl‐1‐ynes

By means of density functional theory, the Mo(CO)₆‐catalyzed intramolecular [2 + 2] or [2 + 2 + 1] cycloaddition reaction of 5‐allenyl‐1‐ynes was investigated. All the intermediates and transition states were optimized completely at B3LYP/6‐311++G(d,p) level (LANL2DZ(f) for Mo). Calculations indicate that the complexation of 5‐allenyl‐1‐ynes with Mo(CO)₆ occurred preferentially at the triple bond to give the complex M1 and then the complexation with the distal double bond of the allenes generates the complex M5 . In this reaction, Mo(CO)₆‐catalyzed intramolecular [2 + 2] cycloaddition is more favorable than [2 + 2 + 1] cycloaddition. The reaction pathway Mo(CO)₆ + R → M5 → T7 → M12 → M13 → T11 → M18 → P4 is the most favorable one, and the most dominant product predicted theoretically is P4 . The solvation effect is remarkable, and it decreases the reaction energy barriers. Copyright © 2011 John Wiley & Sons, Ltd.     

Study of spin–phonon coupling in LiFe1 − xMnxPO4olivines

LiFe_{1 − x}Mn_xPO₄ olivines are promising material for improved performance of Li‐ion batteries. Spin–phonon coupling of LiFe_{1 − x}Mn_xPO₄ (x = 0, 0.3, 0.5) olivines is studied through temperature‐dependent Raman spectroscopy. Among the observed phonon modes, the external mode at ~263 cm⁻¹ is directly correlated with the motions of magnetic Fe²⁺/Mn²⁺ ions. This mode displays anomalous temperature‐dependent behavior near the Néel temperature, indicating a coupling of this mode with spin ordering. As Mn doping increases, the anomalous behavior becomes clearly weaker, indicating the spin–phonon coupling quickly decreases. Our analyses show that the quick decrease of spin–phonon coupling is due to decrease of the strength of spin–phonon coupling, but not change of spin‐ordering feature with Mn doping. Importantly, we suggest that the low electrochemical activity of LiMnPO₄ is correlated with the weak spin–phonon coupling strength, but not with the weak ferromagnetic ground state. Our work would play an important role as a guide in improving the performances of future Li‐ion batteries. Copyright © 2015 John Wiley & Sons, Ltd.     

Theoretical investigations on 4,4′,5,5′‐tetranitro‐2,2′‐1H,1′H‐2,2′‐biimidazole derivatives as potential nitrogen‐rich high energy materials

The ―NH₂, ―NO₂, ―NHNO₂, ―C(NO₂)₃ and ―CF(NO₂)₂ substitution derivatives of 4,4′,5,5′‐tetranitro‐2,2′‐1H,1′H‐2,2′‐biimidazole were studied at B3LYP/aug‐cc‐pVDZ level of density functional theory. The crystal structures were obtained by molecular mechanics (MM) methods. Detonation properties were evaluated using Kamlet–Jacobs equations based on the calculated density and heat of formation. The thermal stability of the title compounds was investigated via the energy gaps (?E_{LUMO ? HOMO}) predicted. Results show that molecules T5 (D = 10.85 km·s^?1, P = 57.94 GPa) and T6 (D = 9.22 km·s^?1, P = 39.21 GPa) with zero or positive oxygen balance are excellent candidates for high energy density oxidizers (HEDOs). All of them appear to be potential explosives compared with the famous ones, octahydro‐1,3,5,7‐tetranitro‐1,3,5,7‐tetraazocane (HMX, D = 8.96 km·s^?1, P = 35.96 GPa) and hexanitrohexaazaisowurtzitane (CL‐20, D = 9.38 km·s^?1, P = 42.00 GPa). In addition, bond dissociation energy calculation indicates that T5 and T6 are also the most thermally stable ones among the title compounds. Copyright © 2014 John Wiley & Sons, Ltd.     

A new method for functionalizing α,γ‐dinitro compounds at the β‐position: application to the cyclization of β‐alkoxy‐α,γ‐dinitro compounds

Treatment of 2,4‐dinitropentane with bromine and sodium methoxide in methanol, affords formation of an ether product, 2,4‐dibromo‐3‐methoxy‐2,4‐dinitropentane, in 59% yield as a mixture of three diastereomers. This observation has led to a general synthesis of 3‐alkoxy‐2,4‐dibromo‐2,4‐dinitropentanes, obtained in 75‐86% yield from 2,4‐dibromo‐2,4‐dinitropentane as the preferred reactant. 4‐Bromo‐2,4‐dinitro‐2‐pentene has been identified as an intermediate in these reactions. The nitroalkene has been isolated and undergoes conjugate addition with alkoxides to afford the same ether products after brominative work‐up. The nitroalkene undergoes conjugate addition with sodium azide to give 3‐azido‐2,4‐dibromo‐2,4‐dinitropentane in 38% yield as a mixture of two isomers in which the (R*,R*) isomer predominates. Sequential treatment of 2,4‐dibromo‐2,4‐dinitropentane with sodium methoxide followed by sodium iodide and acetic acid gives 3‐methoxy‐2,4‐dinitropentane in 63% yield, the overall product of simple methoxylation of 2,4‐dinitropentane. However, attempted complete debromination of 2,4‐dibromo‐3‐methoxy‐2,4‐dinitropentane with excess sodium iodide and acetic acid results only in monodebromination to give 2‐bromo‐3‐methoxy‐2,4‐dinitropentane in 86% yield. Likewise, 2‐bromo‐3‐ethoxy‐2,4‐dinitropentane is formed in 93% yield from the ethoxy analog. A mechanistic rationale is offered for condition‐specific removal of the second Br atom in these reactions. Treatment of 3‐methoxy‐2,4‐dinitropentane with potassium acetate/iodine in dimethyl sulfoxide affords formation of 4,5‐dihydro‐3,4‐dimethyl‐3‐methoxy‐4‐nitroisoxazole 2‐oxide in 30% yield as a single diastereomer. Conversion of 2‐bromo‐3‐methoxy‐2,4‐dinitropentane in 15% yield to 4,5‐dihydro‐3,4‐dimethyl‐3‐methoxy‐4‐nitroisoxazole 2‐oxide is also possible by using potassium acetate in dimethyl sulfoxide. The mechanistic pathways for formation of 4,5‐dihydro‐3,4‐dimethyl‐3‐methoxy‐4‐nitroisoxazole 2‐oxide apparently involve unstable 3‐methoxy‐1,2‐dimethyl‐1,2‐dinitrocyclopropane as the common intermediate. Similarly, 2‐bromo‐3‐ethoxy‐2,4‐dinitropentane affords 4,5‐dihydro‐3‐ethoxy‐3,4‐dimethyl‐4‐nitroisoxazole 2‐oxide in 13% yield. Copyright © 2013 John Wiley & Sons, Ltd.     

Photostability of D–π–A nonlinear optical chromophores containing a benzothiazolium acceptor

For the practical application of second‐order NLO materials, not only a high molecular quadratic hyperpolarizability β but also good thermal, chemical, and photochemical stabilities are required. Most of the state‐of‐the‐art chromophores with high NLO response cannot be put to use because they are photochemically highly unstable. Good thermal and photochemical stabilities with preserved high hyperpolarizabilities can be achieved by replacement of an aromatic ring with easily delocalizable heteroaromatics, e.g., with benzothiazole. Furthermore, desirable modifications of the benzothiazole fragment lead to improvement in β values. Here we report results of a comprehensive investigation of the photochemical stability of seven D–π–A push–pull molecules based on a N‐methylbenzothiazolium acceptor and a N,N‐dimethylaminophenyl donor with a different length of conjugated bridge and different acceptor strength. The quantum yield (Φ) and the kinetic parameters of photoreactions were determined for existing photodegradation pathways on irradiation at 300–850 nm in MeOH. Trans–cis photoisomerization is proposed as a fast but inefficient photobleaching mechanism for these irradiation wavelengths. Self‐sensitized photooxidation by ¹O₂ makes very slow parallel photodegradation pathway and, albeit to small value of Φ, plays a dominant role in the photodegradation of the compounds investigated. Both structural modifications (extension of conjugated bridge and an additional acceptor group bonded to heterocycle) resulting in an increase of NLO response led to a decrease in photostability due to the self‐sensitized ¹O₂ photooxidative attack. Thus a compromise should be found between an increase in NLO response and a decrease in photostability to make a choice of studied compounds for practical applications. Copyright © 2010 John Wiley & Sons, Ltd.     

The β‐silicon effect. 4: substituent effects on the solvolysis of 1‐alkyl‐2‐(aryldimethylsilyl)ethyl trifluoroacetates

Solvolysis rates of 2‐(aryldimethylsilyl)‐1‐methylethyl and 2‐(aryldimethylsilyl)‐1‐tert‐butylethyl trifluoroacetates were determined conductimetrically in 60% (v/v) aqueous ethanol. The effects of aryl substituents at the silicon atom on the solvolysis rates at 50 °C were correlated with parameters of r⁺ = 0.15 with the Yukawa–Tsuno equation, giving ρ values of ?1.5 for both secondary α‐Me and α‐tert‐Bu systems. The ρ values for those secondary systems are less negative than ?1.75 for the 2‐(aryldimethylsilyl)ethyl system that proceeds by the Eaborn (non‐vertical) mechanism, while they are distinctly more negative than ?0.99 for 2‐(aryldimethylsilyl)‐1‐phenylethyl system that should proceed by the Lambert (vertical) mechanism. There was a fairly linear relationship between the reaction constants (ρ) for the β‐silyl substituent effects and the solvolysis reactivities for a series of β‐silyl substrates. The solvolyses of the α‐Me and tert‐Bu substrates proceed through the transition state (TS) with an appreciable degree of the β‐silyl participation, close to the Eaborn (non‐vertical) TS rather than to the Lambert (vertical) TS. Copyright © 2010 John Wiley & Sons, Ltd.     

Deformed “commutative” Chern–Simons’ system

Noncommutative Chern–Simons’ system is non-perturbatively investigated at a full deformed level. A deformed “commutative” phase space is found by a non-canonical change between two sets of deformed variables of noncommutative space. It is explored that in the “commutative” phase space all calculations are similar to the case in commutative space. Spectra of its energy and angular momentum of the Chern–Simons’ system are obtained at the full deformed level. The noncommutative–commutative correspondence is clearly showed. Formalism for the general dynamical system is briefly presented. Some subtle points are clarified.     

Decay Dynamics of 3‐methyl‐3‐pentene‐2‐one from the light absorbing S2(ππ*) state ‐ Resonance Raman Spectroscopy and CASSCF Study

The photophysics of 3‐methyl‐3‐pentene‐2‐one (3M3P2O) after excitation to the S₂(ππ*) electronic state were studied using the resonance Raman spectroscopy and complete active space self‐consistent field (CASSCF) method calculations. The A‐band resonance Raman spectra were obtained in cyclohexane, acetonitrile, and methanol with excitation wavelengths in resonance with the first intense absorption band to probe the structural dynamics of 3M3P2O. The B3LYP‐TD/6‐31++G(d, p) computation was carried out to determine the relative A‐band resonance Raman intensities of the fundamental modes, and the result was used to reproduce the corresponding fundamental band intensities of the 223.1 nm resonance Raman spectrum and thus to examine whether the vibronic‐coupling existed in Franck‐Condon region or not. CASSCF calculations were carried out to determine the minimal singlet excitation energies of S_{1, FC}, S_1,min (nπ*), S_{2, FC}, S_2,min (ππ*), the transition energies of the conical intersection points S_n/S_π, S_n/S₀, and the optimized excited state geometries as well as the geometry structures of the conical intersection points. The A‐band short‐time structural dynamics and the corresponding decay dynamics of 3M3P2O were obtained by the analysis of the resonance Raman intensity pattern and CASSCF computations. It was revealed that the initial structural dynamics of 3M3P2O was towards the simultaneous C₃=C₄ and C₂=O₇ bond elongation, with the C₃=C₄ bond length lengthening greater at the very beginning, whereas the C₂=O₇ bond length changing greater at the later evolution time before reaching the CI(S₂/S₁) conical intersection point. The decay dynamics from S₂(ππ*) to S₁(nπ*) via S₂(ππ*)/S₁(nπ*) in singlet realm and from S₁(nπ*) to T₁(nπ*) via ISC[S₁(nπ*)/T₂(ππ*)/T₁(nπ*)] in triplet realm are proposed. Copyright © 2014 John Wiley & Sons, Ltd.     

On the α-q-Mutual Information and the α-q-Capacities

The measures of information transfer which correspond to non-additive entropies have intensively been studied in previous decades. The majority of the work includes the ones belonging to the Sharma–Mittal entropy class, such as the Rényi, the Tsallis, the Landsberg–Vedral and the Gaussian entropies. All of the considerations follow the same approach, mimicking some of the various and mutually equivalent definitions of Shannon information measures, and the information transfer is quantified by an appropriately defined measure of mutual information, while the maximal information transfer is considered as a generalized channel capacity. However, all of the previous approaches fail to satisfy at least one of the ineluctable properties which a measure of (maximal) information transfer should satisfy, leading to counterintuitive conclusions and predicting nonphysical behavior even in the case of very simple communication channels. This paper fills the gap by proposing two parameter measures named the α-q-mutual information and the α-q-capacity. In addition to standard Shannon approaches, special cases of these measures include the α-mutual information and the α-capacity, which are well established in the information theory literature as measures of additive Rényi information transfer, while the cases of the Tsallis, the Landsberg–Vedral and the Gaussian entropies can also be accessed by special choices of the parameters α and q. It is shown that, unlike the previous definition, the α-q-mutual information and the α-q-capacity satisfy the set of properties, which are stated as axioms, by which they reduce to zero in the case of totally destructive channels and to the (maximal) input Sharma–Mittal entropy in the case of perfect transmission, which is consistent with the maximum likelihood detection error. In addition, they are non-negative and less than or equal to the input and the output Sharma–Mittal entropies, in general. Thus, unlike the previous approaches, the proposed (maximal) information transfer measures do not manifest nonphysical behaviors such as sub-capacitance or super-capacitance, which could qualify them as appropriate measures of the Sharma–Mittal information transfer.     

Thermal reaction of electron deficient 4‐oxo‐4H‐pyrazole 1,2‐dioxide with cycloheptatriene: the first examples of the formation of an endo‐[4π + 6π]‐cycloadduct and an intramolecular 1,3‐dipolar reaction leading to a heterocage

The reaction of 3,5‐bis(methoxycarbonyl)‐4‐oxo‐4H‐pyrazole 1,2‐dioxide (1a) with 1,3,5‐cycloheptatriene (2b) gave a mixture of the novel endo‐[4 + 6]‐cycloadduct (4ab), anti‐exo‐[4 + 2]‐cycloadduct (5ab), and the heterocage (6ab) derived from the intramolecular 1,3‐dipolar cycloaddition reaction of the syn‐endo‐[4 + 2]‐cycloadduct. Analogous endo‐[4 + 6] selectivity in 1,3‐dipolar cycloadditions has not been reported previously. The X‐ray analysis indicates that 6ab has a very long N_sp3–N_sp3 bond distance of 1.617(4) Å. The cycloaddition behaviour is discussed on the basis of transition‐state structures optimized at the B3LYP/6‐31G(d) level of theory, from which predictions of the peri‐, regio‐, and stereoselectivities agreed well with the experimental results. Copyright © 2012 John Wiley & Sons, Ltd.     

Study of the effects of unsupervised over‐the counter whitening products on dental enamel using μ‐Raman and μ‐EDXRF spectroscopies

The purpose of this in vitro study was to assess whether the mineralization degree and elemental content in tooth enamel are altered when bleaching the teeth with two different over‐the‐counter bleaching gels, exceeding the recommendations of the manufacturer. In order to perform this evaluation, 12 healthy teeth were used, six samples were treated with Teeth Whitening Home Kit, and the other six samples were treated with WHITE! (Bingo‐UK) bought in online shopping sites, for the period of 39 days. The pH of each product and the elemental content of each sample, before and after, were obtained by energy dispersive X‐ray spectrometry and phosphate (PO₄^3‐) profile was evaluated with Raman spectroscopy. Data was analyzed accordingly to a pre‐established plan with a mixed‐model ANOVA for repeated measures, significance was set at 5%. Both products were markedly acidic and below enamel critical level of 5.5. Moreover, seven days after treatment, demineralization was significant, wherein at the end of the study the degree of demineralization seems to be permanent. Copyright © 2015 John Wiley & Sons, Ltd.     

Isolation and characterization of conformational isomers of N,N′‐bis(3,5‐dichlorosalicylidene)‐2,2′‐ethylenedianiline: crystal structure,photoluminescence, and density functional theory calculation

We have isolated two isomeric solids 1 and 2 of N,N′‐bis(3,5‐dichlorosalicylidene)‐2,2′‐ethylenedianiline and characterized by IR, UV/Vis, X‐ray powder diffraction, thermogravimetric analysis/differential thermal analysis, and X‐ray crystallography. Although the solids are same formulas, each shows different colors and crystal structures. Orange solid ( 1 ) shows endo conformation while yellow solid ( 2 ) exhibits exo form depending on packing modes. UV/Vis spectra of 1 and 2 appear very similar patterns in the solid state; however, the bands of 1 are slightly red‐shifted compared with those of 2 . 1 displays a strong fluorescent emission band at ~582 nm while 2 shows an intense fluorescent signal at ~563 nm. The charge density populations of 1 and 2 have been studied by computational simulations using density functional theory at pbe1pbe/6‐311G** level. The calculated highest occupied molecular orbital and lowest unoccupied molecular orbital energies of 1 and 2 confirm that charge transfer occurs within the organic molecules. The energy difference of HOMO‐LUMO in 1 is smaller slightly than that of 2 about 0.05 eV (~17 nm). Copyright © 2014 John Wiley & Sons, Ltd.     

Relative stabilities and molecular structures of the isomeric enol ethers and carboxylic esters derived from α‐acetyl‐γ‐butyrolactone and α‐acetyl‐δ‐valerolactone

Recently recorded ¹⁷O NMR spectra of compounds studied in a previous work (Taskinen E. Acta Chem. Scand. 1985; B39 : 489–494) dealing with the thermodynamics of isomerization of the enol ethers of α‐acetyl‐γ‐butyrolactone reveal an error in compound identification, caused by an unexpected isomerization reaction during the synthetic procedure. Thus, acid‐catalyzed treatment of the lactone with HC(OR)₃ in the respective alcohol ROH is shown to lead initially to the desired enol ethers which, however, are gradually isomerized to a mixture of the enol ethers and an ester of 2‐methyl‐4,5‐dihydrofuran‐3‐carboxylic acid. As a result, only one of the two isomeric compounds detected in the previous equilibration study was the expected enol ether (the thermodynamically more stable E isomer) of α‐acetyl‐γ‐butyrolactone, while the other, dominating species was the respective carboxylic ester. In the present work, the evidence provided by the ¹⁷O NMR spectra is presented, and the relative stabilities of the isomeric compounds are discussed on the basis of computational enthalpy data. The treatment is also extended to the respective isomeric compounds derived from α‐acetyl‐δ‐valerolactone. Copyright © 2007 John Wiley & Sons, Ltd.     

A DFT study on the (2 + 3) cycloaddition reactions of 2‐nitropropene‐1 with Z‐C,N‐diarylnitrones

B3LYP/6‐31G* calculations for competing (2 + 3)‐cycloaddition pathways for 2‐nitropropene‐1 (1) to Z‐C, N‐diarylnitrones ( 2a – e ) suggest a concerted reaction mechanism. However, the results point to the strongly asymmetric nature of transition complexes. Increasing polarity of the reaction environment and presence of electron‐donating substituents in the nitrone phenyl rings contribute to the higher asymmetry of these structures. Copyright © 2009 John Wiley & Sons, Ltd.     

Volatile metal β-diketonates — new precursors for the sonochemical synthesis of nanosized materials — sonolysis of thorium(IV) β-diketonates

Ultrasonic irradiation (22 kHz, Ar atmosphere) of Th(IV) β-diketonates Th(HFAA)₄ and Th(DBM)₄, where HFAA and DBM are hexafluoroacetylacetone and dibenzoylmethane respectively, causes them to decompose in hexadecane solutions, forming solid thorium compounds. The first-order rate constants for Th(IV) β-diketonate degradation were found to be (9.3±0.8)×10⁻³ for Th(HFAA)₄ and (3.8±0.4)×10⁻³ min⁻¹ for Th(DBM)₄, (T=92°C, I=3 W cm⁻²). The rate of the sonochemical reaction increased with the rising β-diketonate volatility and decreased with the rising hydrocarbon solvent vapor pressure. Solid sonication products consisted of a mixture of thorium carbide ThC₂ and Th(IV) β-diketonate partial degradation products. The average ThC₂ particle size was estimated to be about 2 nm. ThC₂ formation was attributed to the high-temperature reaction occurring within the cavitating bubble. The thorium β-diketonate partial degradation products formed in the liquid reaction zones surrounding the cavitating bubbles.     

Stereoselectivity and kinetics of [4 + 2] cycloaddition reaction of cyclopentadiene to para‐substituted E‐2‐arylnitroethenes

In spite of diversified electrophilicity of E‐2‐arylnitroethenes, their [4 + 2] cycloaddition reactions with cyclopentadiene leads to the corresponding 6‐endo‐aryl‐5‐exo‐nitronorbornenes and 6‐exo‐aryl‐5‐endo‐nitronorbornenes as the only reaction products. Stereoselectivity, substituent and solvent effects, and activation parameters, suggest that these reactions occur via a synchronous concerted mechanism on both competing pathways. The experimental results obtained are consistent with the data from B3LYP/6‐31G(d) calculations. Due to high electrophilicity of E‐2‐arylnitroethenes, the reactions studied should be considered as polar [4 + 2] cycloadditions. Copyright © 2011 John Wiley & Sons, Ltd.     

On the use of β‐carotene as a probe for solvent polarizability

The solvatochromism of β‐carotene confirms its high sensitivity not only to the polarizability of the medium, but is also contaminated by additional solute/solvent interactions due to its dipolarity and acidity, as well as to changes in its molecular structure in some solvents. A thermochromic analysis of β‐carotene dissolved in 2‐methylbutane and 1‐chlorobutane (ClB) revealed the influence of the solvent dipolarity on its UV/Vis‐spectroscopy behavior in these solvents. Applying Abe's method to the solvent‐induced shift of the first Vis absorption band of β‐carotene in ClB revealed that the electronic excitation substantially increases its polarizability and its dipole moment. Other experimental evidence also confirms that β‐carotene is not a suitable polarizability probe of the medium. Copyright © 2013 John Wiley & Sons, Ltd.