Latex‐state NMR spectroscopy for quantitative analysis of epoxidized deproteinized natural rubber

Method of quantitative analysis through latex‐state ¹³C NMR spectroscopy was established for in situ determination of epoxy group content of epoxidized natural rubber in latex stage. The epoxidized natural rubber latex was prepared by epoxidation of deproteinized natural rubber with freshly prepared peracetic acid in latex stage. The resulting epoxidized deproteinized natural rubber (EDPNR) latex was characterized through latex‐state ¹³C NMR spectroscopy. Chemical shift values of signals of latex‐state ¹³C NMR spectrum for EDPNR were similar to those of solution‐state ¹³C NMR spectrum for EDPNR. Resolution of latex‐state ¹³C NMR spectrum was gradually improved as temperature for the nuclear magnetic resonance (NMR) measurement increased to 70°C. Signal‐to‐noise ratio of latex‐state ¹³C NMR measurement was similar to that of solution‐state ¹³C NMR measurement at temperature above 50°C. The epoxy group content determined through latex‐state NMR spectroscopy was proved to be the same as that determined through solution‐state NMR spectroscopy. Copyright © 2017 John Wiley & Sons, Ltd.     

Atom transfer radical copolymerizationof acrylonitrile/n‐butyl acrylate: Microstructure determination by two‐dimensional nuclearmagnetic resonance spectroscopy

Atom transfer radical polymerization conditions were optimized and standardized with different initiator and catalyst systems. Acrylonitrile/n‐butyl acrylate copolymers were synthesized with 2‐bromopropionitrile as the initiator and CuCl/Cu(0)/2,2′‐bipyridine as the catalyst system. Variations of the feed composition led to copolymers with different compositions. The number‐average molecular weight and the polydispersity index were determined by gel permeation chromatography. Quantitative ¹³C{¹H} NMR was employed to determine the copolymer composition. The reactivity ratios calculated with a methodology based on the Mao–Huglin terminal model were r_A = 1.30 and r_B = 0.68 for acrylonitrile and n‐butyl acrylate, respectively. The reactivity ratios determined by the modified Kelen–Tudos method were r_A = 1.29 ± 0.01 and r_B = 0.67 ± 0.01. ¹³C{¹H} NMR and distortionless enhancement by polarization transfer (DEPT‐45, 90, and 135) were used to distinguish methyl, methylene, methine, and quaternary carbon resonance signals. The overlapping and broad signals of the copolymers were assigned completely to various compositional and configurational sequences by the correlation of one‐dimensional (¹H, ¹³C{¹H}, and DEPT) and two‐dimensional (heteronuclear single quantum coherence, total correlation spectroscopy, and heteronuclear multibond correlation) NMR spectral data. The complete spectral assignments of carbonyl and nitrile carbons were performed with the help of heteronuclear multibond correlation spectra. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2810–2825, 2005     

Photoreactive particle prepared from natural rubber and 1,9‐nonandioldimethacrylate

Photoreactive particle was prepared by graft copolymerization of 1,9‐nonandioldimethacrylate (NDMA) onto deproteinized natural rubber (DPNR) particles in latex stage. First, NDMA was mixed with α‐cyclodextrin (α‐CD) as a coupling agent to form an inclusion complex to stabilize a carbon–carbon double bond of NDMA as a bifunctional monomer. Second, the inclusion complex was graft‐copolymerized onto natural rubber (NR) in latex stage with potassium persulfate (KPS) as an initiator, after deproteinization with urea in the presence of surfactant. A terminal vinyl group of NDMA was used for the graft copolymerization, while the other remained in the resulting polymer, due to the coupling effect of the α‐CD. The products, after washing α‐CD out, were characterized by FTIR, X‐ray diffraction (XRD), ¹H NMR and solid‐state ¹³C NMR measurements. The amount of residual carbon–carbon double bond after graft copolymerization was investigated in relation to the amount of rubber and reaction temperature. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4111–4118, 2009     

Cure temperature influence on natural rubber—A small angle X‐ray scattering study

To analyze the natural rubber behavior during vulcanization under different cure treatments, an experimental investigation using small angle X‐ray scattering was performed. To achieve this, a set of samples were prepared using sulfur and N‐t‐butyl‐2‐benzothiazole sulfenamide as accelerator and then cured at temperatures between 403 and 463 K reaching their optimum mechanical properties considering rheometer tests. The crosslink density of the samples was evaluated by means of the swelling technique in solvent. In the usual Lorentz corrected representation of the X‐ray scattered intensity, a maximum was observed in the plots corresponding to the cured samples, revealing a highly correlated structure. This maximum shifted toward higher values of the scattering vector when the cure temperature of the samples increased. This behavior is discussed in terms of the crosslinks type present in the vulcanized rubber network at different cure temperatures. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2966–2971, 2007     

Complete assignment of the 1H and 13C NMR spectra of cis and trans isonucleoside derivatives of purine with a tetrahydropyran ring

¹H and ¹³C NMR chemical shifts of cis and trans isonucleoside analogues of purine in which the furanose moiety is substituted by a tetrahydropyran ring were completely assigned using one‐ and two‐dimensional NMR experiments that include NOE, DEPT, COSY and HSQC. The significant ¹H and ¹³C NMR signals differentiating between the cis and trans stereoisomers were compared. Copyright © 2010 John Wiley & Sons, Ltd.     

Dynamics in the crystalline polymorphic forms I and II and form III of isotactic poly‐1‐butene

Following an earlier study of the ¹H relaxation and NMR line shapes, we have carried out selective one‐dimensional and two‐dimensional ¹³C solid‐state NMR studies that yield to detailed interpretation of the dynamics in form I, II, and III polymorphs of isotactic poly‐1‐butene. A specific defect diffusion along the side group is proposed to account for the temperature dependence of the ¹³C spectra in form I. The backbone of the helix in forms II and III is shown to undergo large angle motions above the glass‐transition temperature. High‐resolution solid‐state ¹³C two‐dimensional exchange NMR under magic‐angle spinning with cross‐polarization techniques demonstrates the existence of slow rotational jumps of the helices in form III with typical jump rates of about 10 s⁻¹. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2611–2624, 2000     

Structure and dynamics of MG rubber studied by dynamic mechanical analysis and solid‐state NMR

Methyl‐methacrylate‐grafted natural rubber was prepared by free radical polymerization of methyl methacrylate in natural rubber latex, and their structure and dynamics were investigated by dynamic mechanical analysis and solid‐state nuclear magnetic resonance (NMR). Samples were prepared by chemical initiation and high‐energy radiation. The changes of glass transition temperature and tan δ max with different total poly(methyl methacrylate (PMMA) content are reported. The effect of the change in composition in copolymers on tan δ peak width, tan δ max, and area under the tan δ curve are used to understand the miscibility and damping properties. Solid‐state ¹³C‐NMR measurements were carried out to determine several relaxation time parameters, such as rotating frame and laboratory frame proton and carbon relaxation times. Cross polarization times and carbon relaxation times were interpreted based on the changes in the molecular motion. Proton relaxation times were interpreted based on the heterogeneity of the matrix. Results confirmed phase separation and a presence of an interfacial region. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1141–1153, 1999     

Butadiene–isoprene copolymerization with V(acac)3‐MAO. Crystalline and amorphous trans‐1,4 copolymers

Butadiene‐isoprene copolymerization with the system V(acac)₃‐MAO was examined. Crystalline or amorphous copolymers were obtained depending on isoprene content. Both butadiene and isoprene units exhibit a trans‐1,4 structure and are statistically distributed along the polymer chain. Polymer microstructure, comonomer composition, and distribution along the polymer chain were determined by ¹³C and ¹H NMR analysis. The thermal and X‐ray behaviors of the copolymers were also investigated and compared with results from solid‐state ¹³C NMR experiments. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4635–4646, 2007     

Preparation of phenyl‐modified natural rubber in latex stage

Phenyl‐modified natural rubber was prepared in latex stage by bromination of deproteinized natural rubber followed by Suzuki‐Miyaura cross‐coupling reaction. First, the bromination of natural rubber was carried out using N‐bromosuccinimide in latex stage. The bromine atom content increased as amount of N‐bromosuccinimide increased. Second, the allylic bromine atom was replaced with a phenyl group using phenyl boronic acid in the presence of a palladium catalyst, according to the Suzuki‐Miyaura cross‐coupling reaction in latex stage. The resulting products were characterized by nuclear magnetic resonance (NMR) spectroscopy. Signal at 7.13 ppm was assigned to the phenyl group of the product, while signals at 3.98, 4.14, and 4.44 ppm were assigned to the remaining allylic brominated cis‐1,4‐isoprene units. The estimated phenyl group content and the conversion of the Suzuki‐Miyaura cross‐coupling reaction were 1.32 and 23.7 mol%, respectively. Glass transition temperature (T_g) of deproteinized natural rubber increased from ?62°C to ?46.7°C, when the phenyl group was introduced into the rubber.     

Synthesis and characterization of synthetic polymer colloids colloidally stabilized by cationized starch oligomers

A method is developed for anchoring enzymatically degraded cationized starch as electrosteric stabilizers onto synthetic latices, using cerium(IV) to create free‐radical grafting sites on the starch. Direct anchoring of debranched starch onto a poly(methyl methacrylate) seed latex yields a latex stabilized by well‐defined oligosaccharides. Using α‐amylase to randomly cleave starch to form (1→4)‐α‐glucans, and a comonomer, N‐isopropyl acrylamide (NIPAM), whose corresponding polymer exhibits a lower critical solution temperature (LCST), creates a means to synthesize block (or graft) oligomers of oligosaccharide and synthetic polymer, which are water soluble at room temperature. Above 30 °C, they become amphiphilic and form self‐emulsifying nanoparticles (sometimes termed “frozen micelles”) from which a synthetic latex is grown after addition of methyl methacrylate, the collapsed NIPAM‐containing entities functioning as a type of in situ seed. This synthesis of stable synthetic latex particles is shown to have a high grafting efficiency. The starch fragments were characterized by ¹H solution‐state NMR before grafting, and ¹³C solid‐state cross‐polarization magic‐angle spinning (CP‐MAS) NMR was used to characterize the starch oligomers actually grafted on the final latex. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1836–1852, 2009     

1H and 13C NMR signal assignments of some new N,N′‐diacyl proflavine derivatives

The complete ¹H and ¹³C NMR signal assignments of 23 new N,N′‐diacyl proflavine derivatives were achieved using one‐ and two‐dimensional experiments (DEPT, HMQC and HMBC). Copyright © 2009 John Wiley & Sons, Ltd.     

Studies on the phase structure of ethylene‐vinyl acetate copolymers by solid‐state 1H and 13C NMR

The phase structure of a series of ethylene‐vinyl acetate copolymers has been investigated by solid‐state wide‐line ¹H NMR and solid‐state high‐resolution ¹³C NMR spectroscopy. Not only the degree of crystallinity but the relative contents of the monoclinic and orthorhombic crystals within the crystalline region varied with the vinyl acetate (VA) content. Biexponential ¹³C NMR spin–lattice relaxation behavior was observed for the crystalline region of all samples. The component with longer ¹³C NMR spin–lattice relaxation time (T₁) was attributed to the internal part of the crystalline region, whereas the component with shorter ¹³C NMR T₁ to the mobile crystalline component was located between the noncrystalline region and the internal part of the crystalline region. The content of the mobile crystalline component relative to the internal part of the crystalline region increased with the VA content, showing that the ¹³C NMR spin–lattice relaxation behavior is closely related to the crystalline structure of the copolymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2199–2207, 2002     

Investigation of microstructure of the acrylonitrile‐styrene copolymers by 2‐D NMR spectroscopy

Acrylonitrile‐Styrene (A/S) copolymers were prepared by photopolymerization using uranyl nitrate ion as initiator. The copolymer compositions were determined by elemental analysis, and comonomer reactivity ratios were determined by nonlinear least squares error in variables method (EVM). The complete spectral assignment of the ¹³C and ¹H‐NMR spectra were done with the help of Distortionless Enhancement by Polarization Transfer (DEPT) and by the two dimensional ¹³C‐¹H Heteronuclear Single Quantum Correlation (HSQC) and TOCSY experiments. The methylene and methine carbon resonance show both stereochemical and compositional sensitivity. The 2‐D Total Correlated Spectroscopy (TOCSY) experiment was used to ascertain the various geminal coupling between the methylene protons. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 721–727, 1999     

Isolation and spectral study of 4‐methyl‐6,8‐dihydroxy‐7H‐benz[de]anthracen‐7‐one

4‐Methyl‐6,8‐dihydroxy‐7H‐benz[de]anthracen‐7‐one was isolated from the sap of Aloe by column chromatography. Its ¹H and ¹³C NMR spectra were completely assigned by utilizing two‐dimensional ¹H‐detected heteronuclear one‐bond (HMQC) and multiple‐bond (HMBC) chemical shift correlation experiments together with ¹H–¹H COSY and DEPT techniques. These techniques were also valuable in assigning the protons and carbons of those benzanthrone compounds which were previously incompletely reported because of the overlap of proton signals. The molecular structure was elucidated by 2D NMR analysis. The spectral properties (MS, IR and UV) are also presented. Copyright © 2003 John Wiley & Sons, Ltd.     

Solid-state carbon-13 NMR Studies of vulcanized elastomers. V. Observation of new structures in sulfur-vulcanized natural rubber

The complementary application of the NMR inversion recovery measurements and the computer fitting of the overlapping spectral region is found to be a useful method for structural analysis of vulcanized natural rubber in the solid state. Since the linewidths in ¹³C-NMR spectra of solids are relatively broad compared with the differences between chemical shifts, some weak signals are completely obscured in the resulting spectra. If the resonances have sufficiently different relaxation times, such as methyl and methylene carbons, it is possible to detect neighboring heavily overlapped signals by using the inversion recovery delay τ value at which the interfering strong resonance has null intensity. The 20 resonances observed in the spectra of crosslinked rubbers are tentatively assigned to the structural units formed during the vulcanization process. It is found that vulcanizates containing smaller amounts of sulfur (1 and 3%) show insignificant changes in the NMR spectra for curing times of 30 and 90 min. Structural modifications in rubbers cured with 10% sulfur continuously increase with the increasing curing time up to 120 min, indicating a significant loss in double bonds in the later stages of the reaction.     

Measurements of freezing‐point depression to evaluate rubber network structure. Crosslinking of natural rubber with dicumyl peroxide

An experimental approach based on the freezing‐point depression of a solvent in a swollen gel has been developed to characterize the structure of rubber networks. This property depends on the conditions required for the formation of crystalline nuclei, which are limited by the elastomer network restrictions. Information about the functionality, spatial distribution, and number of crosslinks can be obtained by the use of this easy and ready experimental method. Application of the tube model of rubber elasticity in the uniaxial stress–strain experiments of natural rubber samples vulcanized with dicumyl peroxide yields the characteristic parameters of the rubber networks, which are in concordance with the network structures predicted by the freezing point method. Finally influence of vulcanization conditions in network structure and its relationship with the mechanical properties was evaluated. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 544–556, 2007     

Structural and dynamic study of chemically modified polyHIPE by solid‐state 13C NMR spectroscopy

The structure of laboratory‐made polyHIPEs was successfully characterized by cross‐polarity/magic‐angle spinning, solid‐state ¹³C NMR experiments. The signals of vinyl groups appeared in the spectrum of the polyHIPE precursor PH? CH?CH₂, which was prepared by the polymerization of the divinylbenzene continuous phase from a highly concentrated reverse emulsion. This material was chemically modified by the regioselective free‐radical addition of thiols to the pendant vinyl groups. Spectra of materials modified by the grafting of C₈ and C₁₂ alkyl chains, PH? SC₈ and PH? SC₁₂, respectively, were produced. The signals of the vinyl groups disappeared in favor of methylene groups. This experiment clearly established that the alkyl chains were covalently bound to the polymer. To elucidate the dynamic aspect of long chains in polyHIPE, we measured the ¹³C spin–lattice relaxation times (T₁) of PH? SC₁₂ from 25 to 100 °C with variable‐temperature, solid‐state, high‐resolution ¹³C NMR spectroscopy, revealing a strong variation in T₁ along the alkyl side chain. Furthermore, the crystallinity of a wide range of chemically modified polyHIPEs, including PH? SC₁₂, was studied with pulse ¹H NMR. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 956–963, 2001     

Structural analysis of polyhydroxyurethane obtained by polyaddition of bifunctional five‐membered cyclic carbonate and diamine based on the model reaction

This article focuses on the structural analysis of polyhydroxyurethane obtained by the reaction of 2,2‐bis[p‐(1,3‐dioxolan‐2‐one‐4‐yl‐methoxy)phenyl]propane with a diamine based on the model reaction. The compounds obtained in the model reaction could be separated into hydroxyurethanes containing primary and secondary alcohol groups by preparative gel permeation chromatography with a recycling technique to determine the structures by ¹H NMR, ¹³C NMR, distortionless enhancement by polarization transfer (DEPT) and C H correlation spectroscopy to obtain hydroxyurethane carrying the primary alcohol structure moiety dominantly. The ratios were independent of the reaction temperature but somewhat dependent on the solvents and amines. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 851–859, 2001     

NMR Characterization of Complex p‐Oligophenyl Scaffolds by Means of Aliasing Techniques to Obtain Resolution‐Enhanced Two‐Dimensional Spectra

The usefulness of computer‐assisted aliasing to secure maximal resolution of signal clusters in ¹H‐ and ¹³C‐NMR spectra (which is essential for structure determination by HMBC 2D NMR spectroscopy) in minimal acquisition time is exemplified by the complete characterization of the two complementary p‐octiphenyls 1 and 2 with complex substitution patterns. The need for digital resolution near 1 Hz/pt to dissect the extensive signal clusters in the NMR spectra of these refined oligomers excluded structure determination under routine conditions. High resolution was secured by exploiting the low signal density in the ¹³C dimension of HMBC spectra by using computer‐assisted aliasing to maximize signal density. Based on the observed shifts in DEPT and ¹H‐decoupled ¹³C‐NMR spectra of 1 and 2 , computer‐assisted aliasing allowed to reduce the number of required time increments by a factor of 20 to 30 compared to full‐width spectra with identical resolution. Without signal‐to‐noise constraints, this computer‐assisted aliasing reduced the acquisition time for high‐resolution NMR spectra needed for complete characterization of refined oligomers 1 and 2 by the same factor (e.g., from over a day to about an hour). With resolved signal clusters in fully aliased HSQC and HMBC spectra, unproblematic structure determination of 1 and 2 is demonstrated by unambiguous assignment of all C‐ and H‐atoms. These findings demonstrate that computer‐assisted aliasing of the underexploited ¹³C dimension makes extensive molecular complexity accessible by conventional multidimensional heteronuclear NMR experiments without extraordinary efforts.     

Characterization of 4,5‐Dihydro‐1H‐Pyrazole Derivatives by 13C NMR Spectroscopy

The ¹³ C NMR resonances of 19 1‐acyl‐3‐(2‐nitro‐5‐substitutedphenyl)‐4,5‐dihydro‐1H‐pyrazoles, and 19 1‐acyl‐3‐(2‐amino‐5‐substituted)‐4,5‐dihydro‐1H‐pyrazoles, were completely assigned using the concerted application of one‐ and two‐dimensional NMR experiments (DEPT, gs‐HSQC and gs‐HMBC). Copyright © 2012 John Wiley & Sons, Ltd.