TA15钛合金激光沉积温度场数值模拟与检测

在综合考虑热源模型、对流辐射换热、相变潜热、材料非线性因素对激光沉积修复温度场影响前提下,建立了激光沉积修复的数学模型,采用有限元参数化设计语言(APDL)对多道多层激光沉积修复温度场进行了数值模拟。研究了激光沉积修复瞬时温度场及其中心高度上节点温度随时间变化情况,分析了修复件中心高度上温度梯度分布情况。搭建了激光沉积修复温度测量系统,对修复时表面温度进行了测量,并与模拟温度进行了比较,两者吻合较好。为控制激光沉积修复组织、提高修复质量提供有效手段。     

高能激光功率能量测量中的定标方法

高能激光功率、能量极高，这对其测量造成极大的困难，如何准确、有效的对其定标具有很重要的意义。文中分别从能量定标、功率定标两个方面作了详细的分析，并得到了功率、能量设计中应注意的几个重要问题。     

绝对吸收式激光能量计高准确度校准技术研究

采用量热法的高能激光能量计用于测量能量大于50 kJ的连续波高能激光能量,通常用已知功率的连续激光开展激光能量计的光电校准需要激光照射时间超过20 min,而由于热损失等原因,进行长时间激光能量校准时,校准不确定度高达12%。以量热式平面吸收高能激光能量计为模型,从理论上分析了热辐射、热对流对连续波高能激光能量测量结果的影响,得到了较准确的平面吸收腔激光能量计冷却数学模型,实现了能量计热损失补偿,并通过建立相应的实验装置验证了该模型,用其对装置的测量结果加以修正,可使光电校准的测量不确定度减小到1%以下。     

强激光与细锥靶相互作用产生强流高能电子束的研究

本文提出采用了强激光与细锥形靶作用, 产生大量定向高能电子, 用于快点火激光聚变方案研究. 通过PIC 模拟, 研究了细锥靶和激光脉冲的各项参数, 对产生高能电子的影响. 模拟发现, 细锥靶开口10° 时能够产生较多的高能电子, 当开口角度逐渐增大时, 高能电子的能量和数目都有一定程度下降. 若为细锥靶加上预等离子体, 产生的高能电子的数目将大大提高, 而最高的电子能量将会下降. 中等能量的电子加速主要由于激光有质动力加速, 而高能量的电子加速主要由于电子感应加速. 随着激光脉宽的增加, 高能电子的数量直线上升. 关键词： 细锥形靶 电子加速 感应共振加速     

用于激光等离子体测量的X光量热计

 由于X光量热计具有体型吸收、线性响应及抗电磁干扰能力强等优点,可用于对激光等离子体辐射的X光总量测量。介绍了X光量热计的原理和结构,量热计主要由吸收体、热电堆、恒温体和外壳4个部分组成;量热计吸收体接收X光能量后,在瞬时内温度迅速上升,同时又通过热传导或辐射而损失能量。电加热法作为X光量热计的传统标定方法,标定结果不可靠。为此采用经过绝对标定的XRD阵列谱仪（SXS）对X光量热计在神光-Ⅱ装置上进行了在线绝对标定。结果表明：X光量热计性能稳定,其灵敏度为(84.1±3.4) μV/mJ,X光能量测量的相对合成标准不确定度约为31%,可用于X光定量测量。     

用于激光等离子体能量测定的差分量热计

本文叙述了一种用于激光打靶等离子体能量测定的补偿型双圆片差分量热计的设计、结构、成形、效率的绝对刻度及其性能;对低能离子在吸收体上的溅射系数作了定量计算;同时简要地列举了激光打靶测量中的一些结果。所设计的差分量热计测量误差为±6％。     

一种测量大面积激光束光强分布的复合阵列

针对大面积高能激光束时空分布参数测量的需要,研究了量热和光电法综合测量激光束时空分布的方法。采用现场实时定标技术有效地解决了两类数据融合问题,研制了量热光电复合阵列测量系统。该复合阵列主要由256路量热探测单元、120路光电探测单元、多通道数据采集模块和数据分析处理模块等部分组成,具有量热型探头测量绝对激光能量准确、光电探测器测量时间分辨率高等优点,实现了大面积高能激光束光强分布时间和空间的绝对测量。     

适用于非常规工作环境中热释电型激光能量计的研制

现有的激光能量计传感器灵敏度系数都与其所处环境温度有关,在-50℃～70℃的温度范围内,灵敏度偏差较大,直接影响测量结果。为了达到消除环境温度的影响,采取在不同环境温度下对热释型能量计的灵敏度进行校准的研究方法。该校准方法与普通激光能量计的校准方法的不同之处在于对热释电型能量计进行校准时,温度由室温扩展到-50℃～70℃的温度范围。利用环境试验箱,每隔10℃固定一个温度点,进行激光能量的测量实验,得到各个温度点所对应的灵敏度修正系数,再借助最小二乘法建立起各个温度点上能量计灵敏度系数同环境温度的函数关系,从而实现了-50℃～70℃的温度范围内激光能量的准确计量。研制能直接工作于非常规工作环境下的热释电型激光能量计,对解决激光能量测量的外场需求有一定现实意义。     

高能高功率激光参数测量技术研究

简述了高能高功率激光技术的发展现状及其计量测试需求，介绍了近年来开展的高能高功率激光参数计量测试研究取得的进展，给出激光功率能量、时域参数和空域参数等测量原理和方法。指出了高能高功率激光参数测量面临的主要问题及需要突破的关键技术，包括大动态范围功率能量“无畸变”衰减技术、激光功率能量现场测量技术和功率能量计溯源及后向散射补偿方法等。     

一种新的超声表面波测温方法研究

在材料科学和材料工程领域,对受热材料温度分布测量的需求一直在持续增长。这主要是因为对于材料的各种特性和行为,温度都是其重要参量。本文设计一种新的声表面波测量方法测量在加热或冷却过程中的材料表面的温度梯度。这种方法涉及到超声波回波测量和导热反问题的分析方法来得到材料中沿超声传播方向的一维温度场分布。为了证明方法的可行性,文章使用铝板进行了实验并得到了准确的材料表面温度场分布图像。超声测温技术将作为一种新型的热点技术,将有很大潜力被用在工业材料高温操作过程中的表面温度场成像。     

An investigation and modelling of energy dissipation through sloshing in an egg-shaped shell

Sloshing absorbers work on a similar principle to that of tuned vibration absorbers. A sloshing absorber consists of a tank, partially filled with liquid. The absorber is attached to the structure to be controlled, and relies on the structure's motion to excite the liquid. Consequently, a sloshing wave is produced at the liquid free surface possessing energy dissipative qualities to suppress excessive vibrations of the structure.The hen's egg has evolved to dissipate vibration energy rapidly to protect its contents. An uncooked hen's egg's capability to rapidly dissipate potentially harmful energy, is due to sloshing of its contents. Hence, there may be lessons to learn from the natural design of an egg which could be employed in the engineered (artificial) design of a sloshing absorber.The primary objective of this work is to identify the physical events responsible for effective energy dissipation in an eggshell, at different fill levels. A secondary objective is to demonstrate the suitability of the Smoothed Particle Hydrodynamics (SPH) method for numerical predictions in such an unusually shaped shell. Through numerical predictions, the possibility of modifying the egg's design to further encourage dissipation patterns is explored briefly. Simple experiments are also presented to check the validity of the numerical predictions.     

现场激光能量计量技术的研究

由于激光能量计传感器的灵敏度与温度条件有关，在温差较大时，有的传感器灵敏度偏差可达到16%，因而在靶场、野外现场温度条件下，现有的激光能量计无法进行准确测试。为了解决这一问题，研制了一种新型的现场激光能量计。在现有激光能量计的基础上，通过选择相对透明、吸收层相对较厚(毫米量级)、热敏面不易损伤的激光吸收材料，对激光能量计内置温度传感器及数字处理电路进行了重新设计，满足了不同温度条件下现场能量测量的需求。     

Time‐integrated energy domain measurements with synchrotron radiation

A new time integrated method for the study of resonant nuclear scattering of synchrotron radiation in the forward direction or in Bragg directions is introduced. This method gives in principle similar information as the well known time differential method. A brief comparison of both methods is presented. The idea is to excite coherently the nuclei incorporated in two absorbers, one moving with respect to the other. The fields radiated by the nuclei from both absorbers interfere and each time the nuclear energy in one absorber matches, by Doppler modulation, the nuclear energy of the other, an extremum in the time integrated intensity is observed. The results of the first experiments at the Advanced Photon Source at the Argonne National Laboratory will be presented. This revised version was published online in August 2006 with corrections to the Cover Date.     

A study of energy dissipation and critical speed of granular flow in a rotating cylinder

Tuned vibration absorbers may improve the safety of flexible structures which are prone to excessive oscillation magnitudes under dynamic loads. A novel absorber design proposes sloshing of granular material in a rotating cylinder where the granular material is the energy dissipating agent. As the conventional dissipative elements require maintenance due to the nature of their function, the new design may represent a virtually maintenance free alternative.     

Impedance approach to designing efficient vibration energy absorbers

The concept introduced previously by the authors on the best sound absorber having the maximum allowable efficiency in absorbing the energy of an incident sound field has been extended to arbitrary linear elastic media and structures. Analytic relations have been found for the input impedance characteristics that the best vibrational energy absorber should have. The implementation of these relations is the basis of the proposed impedance method of designing efficient vibration and noise absorbers. We present the results of a laboratory experiment that confirms the validity of the obtained theoretical relations, and we construct the simplest best vibration absorber. We also calculate the parameters and demonstrate the efficiency of a dynamic vibration absorber as the best absorber.     

非链式HF激光器能量稳定性影响因素实验研究

为提高非链式电激励脉冲HF激光的能量稳定性,分析了激光产生反应动力学和影响激光能量稳定性的主要因素,得知基态HF分子的生成、工作气体的温度上升以及工作气体C2H6的消耗是激光能量快速下降的主要原因。经实验研究,没有采用任何反应产物去除方法的情况下,激光器输出1600个脉冲激光后,激光能量下降率达31%,采用沸石分子筛吸附单元对基态HF分子进行吸附后,同样输出1600个脉冲激光,激光能量基本趋于平稳状态,且输出约5500个脉冲激光后,激光能量较初始平均值仅有10%的下降;另外,在激光器运行过程中,恢复工作气体的初始温度和补充少量的C2H6也能改善激光能量的稳定性,其中补充25%的C2H6气体可使激光能量提高近8%。由激光产生反应动力学和实验研究结果可知,增加分子筛吸附单元、工作气体温控单元和工作气体实时补给单元可提高激光能量的稳定性。     

The measured energy loss of high energy electrons in copper and lead

The energy distributions of electrons of about 53, 75 and 93 MeV have been measured before and after passing through copper absorber of thickness up to 5.726 g/cm² and lead absorbers of thickness up to 2.825 g/cm². Earlier data for aluminum absorbers are reviewed. The electrons were accelerated by the LINAC of the Naval Postgraduate School. The most probable energy losses agree with the theory of Blunck and Westphal for all thicknesses; the half widths agree except for large thicknesses, where they are smaller than theoretical values for lead, in agreement for copper, and larger for aluminum. Large numbers of electrons of energy less than 30 MeV are observed in the distributions of transmitted electrons, particularly for thick absorbers and higher values of atomic number. These are apparently the result of multiple processes in the absorbers.     

Photoacoustic cavitation in spherical and cylindrical absorbers

Photomechanical damage in absorbing regions or particles surrounded by a non-absorbing medium is investigated experimentally and theoretically. The damage mechanism is based on the generation of thermoelastic pressure by absorption of pulsed laser radiation under conditions of stress confinement. Principles of photoacoustic sound generation predict that the acoustic wave generated in a finite-size absorbing region must contain both compressive and tensile stresses. Time-resolved imaging experiments were performed to examine whether the tensile stress causes cavitation in absorbers of spherical or cylindrical shape. The samples were absorbing water droplets and gelatin cylinders suspended in oil. They were irradiated with 6-ns-long pulses from an optical parametric oscillator. Photoacoustic cavitation was observed near the center of the absorbers, even if the estimated temperature caused by absorption of the laser pulse did not exceed the boiling point. The experimental findings are supported by theoretical simulations that reveal strong tensile stress in the interior of the absorbers, near the center of symmetry. Tensile stress amplitudes depend on the shape of the absorber, the laser pulse duration, and the ratio of absorber size to optical absorption length. The photoacoustic damage mechanism has implications for the interaction of ns and sub-nslaser pulses with pigmented structures in biological tissue. Received: 9 October 1998 / Accepted: 5 January 1999 / Published online: 31 March 1999     

Vibration confinement and energy harvesting in flexible structures using collocated absorbers and piezoelectric devices

We propose an optimal design for supplementing flexible structures with a set of absorbers and piezoelectric devices for vibration confinement and energy harvesting. We assume that the original structure is sensitive to vibrations and that the absorbers are the elements where the vibration energy is confined and then harvested by means of piezoelectric devices. The design of the additional mechanical and electrical components is formulated as a dynamic optimization problem in which the objective function is the total energy of the uncontrolled structure. The locations, masses, stiffnesses, and damping coefficients of these absorbers and capacitances, load resistances, and electromechanical coupling coefficients are optimized to minimize the total energy of the structure. We use the Galerkin procedure to discretize the equations of motion that describe the coupled dynamics of the flexible structure and the added absorbers and harvesting devices. We develop a numerical code that determines the unknown parameters of a pre-specified set of absorbers and harvesting components. We input a set of initial values for these parameters, and the code updates them while minimizing the total energy in the uncontrolled structure. To illustrate the proposed design, we consider a simply supported beam with harmonic external excitations. Here, we consider two possible configurations for each of the additional piezoelectric devices, either embedded between the structure and the absorbers or between the ground and absorbers. We present simulations of the harvested power and associated voltage for each pair of collocated absorber and piezoelectric device. The simulated responses of the beam show that its energy is confined and harvested simultaneously.     

飞焦级脉冲激光能量测量方法研究

为解决1 fJ～1 pJ脉冲激光能量的测量问题,提出了一种基于时域波形积分的飞焦级脉冲激光能量测量方法。该方法采用光电倍增管（PMT）获得飞焦级脉冲激光的响应信号,该微弱响应信号经放大、校准与激光脉冲时域波形积分后实现飞焦级脉冲激光能量测量。根据该方法设计了飞焦级脉冲激光能量测量装置,并分析了该装置的测量不确定度。实验表明,该装置实现了波长1 064 nm、脉冲宽度5 ns～1 s、能量范围1 fJ～1 pJ的脉冲激光光源的能量测量,测量不确定度为15.8%。