共查询到20条相似文献,搜索用时 15 毫秒
1.
Kotaro Nakamura Kazuki Kurihara Hiroshi Kawaguchi Takayuki Obata Hiroshi Ito Eiji Okada 《Optical Review》2016,23(2):316-322
Three-dimensional head models with the structures constructed from the MR head images of 40 volunteers were constructed to analyze light propagation in the subject-specific head models. The mean optical path length in the head and the partial optical path length in the brain at 13 fiducial points for each volunteer were estimated to evaluate the intersubject and spatial variability in the optical path lengths. Although the intersubject variability in the optical path lengths is very high, the spatial variability in the average of the mean optical path length and partial optical path length is similar to the previously reported data. The mean optical path length in the head increases, whereas the partial optical path length in the brain decreases with an increase in the depth of the brain surface. The partial optical path length is highly correlated with the depth of the brain surface in comparison to the mean optical path length in the head. 相似文献
2.
We theoretically investigated InGaAsP/InP evanescent mode waveguide optical isolators and proposed their application to InGaAsP/InP/Si
hybrid evanescent optical isolators. InGaAsP/InP evanescent optical isolators are composed of semiconductor optical amplifier
(SOA) waveguides having InGaAsP multiple quantum well (MQW) active layer and upper InGaAsP waveguide layer with ferromagnetic
layer. Optical isolation is obtained for evanescent optical mode in the InGaAsP waveguide layer. InGaAsP/InP/Si hybrid evanescent
optical isolators are theoretically proposed based on the idea of InGaAsP/InP evanescent optical isolators. InGaAsP/InP/Si
hybrid evanescent optical isolators are composed of ferromagnetic metal loaded silicon evanescent waveguides with wafer-bonded
InGaAsP/InP optical gain material. The optical isolation and propagation loss are discussed with the structure of silicon
evanescent waveguides, and optical isolation of 8.0 dB/mm was estimated. The concept of semiconductor evanescent mode optical
isolators is feasible with InP based photonic integrated circuits and advanced silicon photonics. 相似文献
3.
4.
红外目标模拟器由红外目标图像发生器和投影光学系统组成。该红外光学系统是一个要求与2个导引光学系统的光学技术参数相匹配的长焦距、大视场和具有像方远心光路的中红外光学系统。叙述用于红外目标模拟器的红外耦合光学系统的设计原理,提出它与导引光学系统一起可组成放大倍率M=4.5×的红外投影光学系统,并指出IR CRT产生的图像通过红外投影光学系统可成像在导引接收器上。针对给出的红外耦合光学系统的设计特点和技术要求,光学材料选取硅(Si) 锗(Ge) 硅(Si),采用简单的柯克三片式结构完成光学系统设计。设计评价结果表明,该系统的光学性能和成像质量均满足设计指标要求。 相似文献
5.
6.
本文提出一种利用非传统螺旋相位调控高阶涡旋光束拓扑结构的方法.数值模拟并实验研究了具有不均匀旋转梯度的非传统螺旋相位对高阶涡旋光束的调控行为.结果表明, 携带有非传统螺旋相位的高阶涡旋光束在传输过程中, 将退化为沿一条直线排列的多个一阶相位奇点, 并且, 这种非传统螺旋相位对高阶涡旋光束的调控特性, 可抑制相位噪声等扰动所引起的拓扑结构随机退化现象.本文的结论为涡旋光束拓扑结构的调控提供了一种可行的新途径, 在基于涡旋光束的光学通信、光学操控等方面具有潜在应用. 相似文献
7.
高纠缠度的纠缠源是实现高保真度量子信息传输与处理的保障,因为受到光学元器件自身性能不完美的限制,通过有效的操控手段来提高光场的纠缠度是十分必要的.连续变量Einstein-Podolsky-Rosen纠缠态光场可以利用工作在阈值以下的非简并光学参量放大器来获得.将两个非简并光学参量放大器级联,可以利用第二个光学腔来操控第一个光学腔输出的纠缠态光场,在一定条件下实现光场的纠缠增强.本文通过理论分析设计出两种光学腔级联的实验系统,其中,纠缠产生装置采用具有三共振结构的半整块驻波腔,输出到目前为止世界上单腔获得两组份纠缠态光场纠缠度的最高值,操控光学腔采用驻波腔或四镜环形腔的结构.详细对比分析了不同结构的操控腔对纠缠增强效果的影响,得出利用不同腔形作为操控腔的最佳实验方案.同时分析了级联腔输出光场的纠缠度随不同物理参量的变化关系,得出进一步优化的最佳实验系统参量,为实验获得更高纠缠度的纠缠态光场提供了依据. 相似文献
8.
新型光学材料发展综述 总被引:1,自引:0,他引:1
新型光学材料是指光电数码及信息产品所应用的技术含量高、制作难度大、光学性能优越的光学材料,一般是指镧系光学玻璃、环保系列光学玻璃、低熔点及磷酸盐光学玻璃等。目前我国光学材料的研究开发水平与国外发达国家相比还有一定的差距,特别是与日本和德国等国际知名光学材料生产厂家相比,无论从光学玻璃品种还是生产工艺及设备都存在着明显的差距。目前我国光学材料行业仍以生产传统的光学玻璃为主,一些新型材料需从国外进口,不能完全满足我国高科技发展的需要。在光学材料方面,我国急待需要进行技术研究和技术创新工作,即开发新型的光学材料,研究先进的制造工艺以及测试技术,尽快形成我国的产业化规模生产。 相似文献
9.
《Current Applied Physics》2010,10(3):834-837
Here we describe the effect of the incident optical spot size upon the quadrant photodetector on the displacement detection sensitivity of the optical beam deflection method. By varying the size of the beam spot reaching the photodetector and measuring the optical responsivity, we have determined the optical detection sensitivity as a function of the optical spot size on the photodetector. Also, we have calculated the numerical value of the detection sensitivity with the Gaussian optical spot profile and compared with the experimental data. Both experimental and analytic studies show that the optical displacement detection sensitivity increases with the decrease in the width of the Gaussian optical spot. The study presented here will be beneficial in developing the nanomechanical displacement detection techniques based on the beam deflection method with a position-sensitive detector. 相似文献
10.
11.
There seem to be three possible approaches to achieve efficient non-linear optical effects in fibres: the increase of optical intensity in fibres, the control of group velocity dispersion in fibres and the use of efficient non-linear optical materials for fibres. From this viewpoint, high-numerical-aperture single-mode fibres with high optical intensity, single-mode fibres with extremely small dispersion at the operating wavelength and LiNbO3 single-crystal fibres with efficient non-linear effects, are now being investigated. This paper describes the fabrication of these optical fibres, and their non-linear optical applications. 相似文献
12.
13.
An experiment on receiving and identifying multiple optical orthogonal codes (MOOC) sequence-based optical labels in an optical packet switching (OPS) network is reported. Two groups of MOOC with a code length of 23 and a code weight of 3 are used to identify the optical labels. The scheme and principle of OPS networks based on MOOC sequence-based optical labels are presented. Because optical labels contain OPS and routing information, the importance of optical label processing with multiple inconsecutive, random, and burst optical labels in an OPS network is pointed out. Considering the MOOC-based optical labels, we design a circuit consisting of a broadened network and a cascaded amplifier to receive multiple groups of low-power narrow pulses (optical labels in the MOOC-OPS network) with a period of 2 ns. The successful experimental results demonstrate that the designed scheme is feasible. 相似文献
14.
Optical forces acting on a sphere were experimentally analyzed to investigate the single-beam fiber optic trap using a cleaved optical fiber or a lensed optical fiber. A stable optical trap could be created at the point where the x-directed (horizontal) optical forces were precisely balanced, and the vector sum of axial and transverse forces acting on a sphere gave a restoring force directed back to the stable point. As compared with other embodiments, such as a single-beam gradient trap (optical tweezers) and dual-beam fiber optical traps, this single-beam fiber optic trapping was most economical, much simpler to operate, and required relatively low optical power to capture an object. Furthermore, a lensed optical fiber could easily trap and manipulate a micro object in comparison with a cleaved optical fiber because of the strong transverse optical confinement. 相似文献
15.
K. Barczak T. Pustelny D. Dorosz J. Dorosz 《The European physical journal. Special topics》2008,154(1):11-14
Optical fibers may be applied in measurements of
electrical current, particularly as so-called optical current transformers.
Electric current sensors, in which optical fibers are used are small, light,
cheap and safe. Their sensitivity is, however, due to the restricted
magnetootpic properties of optical fibers, rather small. Moreover, these
sensors are susceptible to deformations of the optical fiber. An increase of
their sensitivity consists in lengthening the distance of optical fiber on
which the magnetic field acts. However, this can lead to an increase of
disturbances caused by changes of internal stresses. The negative effects
can be reduced by applying optical fibers with a higher magnetooptic
sensitivity and a lower susceptibility to mechanical stresses and
deformations. The present paper deals with side-hole optical fibers with a
decreased birefringence reducing the susceptibility to deformations. The
optical fibers consist of a multicomponent glass with a higher value of the
refractive index, thanks to which the sensitivity to the effect of the
external magnetic field is increased. In future such optical fibers are
planed to be applied in magnetooptic sensors. 相似文献
16.
数字光开关网络中四功能交换开关光学Omega网络 总被引:2,自引:2,他引:0
本文提出了一种用于数字光开关网络中,四功能交换开关光学Omega网络。文中详细地阐述了用液晶空间光调制方法实现光学四功能交换开关,和Omega互连网络的原理,并给出了光学系统和实验结果。 相似文献
17.
18.
本文从光学位置坐标算符和正则动量算符的定义以及线性光学系统光学算符的幺正性假设出发,由线性系统的普遍性质建立光学系统算符表示和矩阵表示的关联方程,进而利用该方程实现了光学算符和光学矩阵的互为导出,因此证明了光学算符法和矩阵法的等效对应关系。最后,本文说明了光学算符的物理意义。
关键词: 相似文献
19.
Optical multistability of a Fabry-Perot semiconductor laser is analyzed when multi-optical inputs detuned from the cavity-resonant wavelength of a semiconductor laser are injected. Many split branches are shown to be produced in the optical output versus optical input characteristics for different detuned optical inputs. It is also shown that optical outputs can be switched in any one of the optical input wavelengths by optical input pulses, based on the optical output versus input characteristics with multi-split branches. 相似文献
20.
提出了一种新型的基于光电振荡器的重复频率可调谐的超低抖动光窄脉冲源. 光电振荡器系统可以产生超低相位噪声的微波信号; 被该信号调制的直调光经过两次相位调制之后, 使光脉冲的啁啾增强; 再通过一段色散补偿光纤, 光脉冲被进一步压窄. 实验中使用YIG可调滤波器, 可以得到8–12 GHz内步进为200 MHz的可调谐微波信号, 因此光脉冲的重复频率具有可调谐性. 当微波信号即脉冲重复频率为9.6 GHz时, 测得脉冲宽度为3.7 ps, 相位噪声为-130.1 dBc/Hz@10 kHz. 由此得出光脉冲的瞬时抖动为60.1 fs (100 Hz–1 MHz), 因此该方案产生的光窄脉冲源具有超低的抖动. 相似文献