一种高聚物粘结炸药和B炸药的本构关系研究

 利用万能材料试验机对一种高聚物粘结炸药（简称PBX炸药）和压装B炸药进行了准静态压缩实验,得到了两种炸药在不同应变率下的应力应变曲线。通过两种炸药在不同应变率下力学性能的研究,建立了两种炸药含应变率效应的本构方程。结果表明,建立的本构方程能较好地描述两种炸药在弹性阶段和强化阶段的力学性能。     

PBX炸药含各向异性损伤的黏弹性统计微裂纹本构模型初步研究

建立含损伤本构模型是研究炸药动态力学响应规律的基础。基于PBX炸药材料的宏观黏弹性特征和细观上微裂纹面的方向性,建立了含各向异性损伤的黏弹性统计微裂纹(Aniso-Visco SCRAM)本构模型,简化后得到单轴应力加载下的本构方程。利用数值计算程序,以PBX9501为例,分析了微裂纹扩展的各向异性、PBX炸药破坏强度及临界应变的拉压异性和应变率相关性,考察了微裂纹数密度、初始微裂纹尺寸、微裂纹面摩擦系数及断裂表面能4个主要参数的敏感性及影响规律。结果表明,它们对微裂纹的扩展演化有较大影响,进而导致材料表现出不同的力学响应。     

纯铁和铁基合金楔形样品中的冲击相变

2005年，Koflov等对滑移爆轰加载下的楔形纯铁DT-2样品进行了研究，样品仅在斜面部分发生了局部层裂，材料中明显存在不同的几个区域：材料无破坏区域、层裂开始和发展区域、加载表面-高能炸药接触面、满足α-ε相变条件的加载表面邻近区域和初始状态为硼发生高应变率变形的材料区域。但是滑移爆轰加载波系作用非常复杂，无法准确给出各区域宏细观变形破坏所对应的加载应力状态。     

PBX炸药动态Brazilian试验及数值模拟研究

 开展了PBX炸药的动态Brazilian试验,获得了不同加载应变率条件下的拉伸强度;通过高速摄影,获得了PBX炸药试样表面裂纹的产生发展过程;采用数字散斑相关方法,获得了试样出现裂纹前的应变场分布。利用离散元方法,开展了考虑PBX炸药细观结构的动态Brazilian数值模拟,获得了损伤演化发展、并形成裂纹的全过程,模拟结果能初步再现PBX炸药的损伤破坏过程。     

PBX材料宏细观断裂行为的数字散斑相关法实验研究

 采用半圆盘弯曲实验和数字散斑相关方法,对高聚物粘结炸药（PBX）的宏、细观断裂行为进行了实验研究。宏观上,带有预制裂纹的半圆盘试样发生拉伸破坏,利用数字散斑相关技术得到了试样的应变场和位移矢量场分布,定量分析了试样全场的变形特征,并测得了PBX材料的平面应变断裂韧性;细观上,用配有加载装置的扫描电子显微镜对含预制裂纹的半圆盘试样间接拉伸下的损伤演化和破坏过程进行了实时原位观察,借助于数字散斑相关方法,定量分析了试样损伤局部化特征。结果表明,将数字散斑相关方法用于研究PBX材料宏、细观尺度上的变形破坏问题是有效的。     

某PBX炸药的动态力学性能研究

 PBX炸药作为现代武器的主装药,它的力学行为决定着武器的生存能力。为了研究PBX炸药的动态力学特性,采用分离式霍普金森压杆（Split Hopkinson Pressure Bar,SHPB）作为加载手段,结合半导体应变片测试技术和压电晶体监测技术,保证了实验数据的有效性。利用SHPB加载波整形技术,实现了材料两端应力平衡和常应变率加载,得到了不同应变率（90~410 s^-1）下材料的应力-应变曲线。根据材料的模量、破坏强度和破坏应变随应变率的变化规律,采用粘性修正的Sargin模型,得到了该PBX炸药在单轴压缩下的唯象本构模型,模拟结果与实验曲线符合较好。     

基于冰颗粒增强的冻土细观动态本构模型

为了直观地描述冻土在冲击加载下的动态力学性能和应力-应变关系,从细观出发,将冻土视为冰颗粒增强的复合材料,建立了基于冰颗粒增强的冻土细观动态本构模型。根据土相在冲击作用下层层破坏的特点,假定冲击层的动模量因冲击损伤而发生变化,在模型中引入了应变率项。利用分离式霍普金森压杆(SHPB)对冻土进行冲击加载实验,通过改变温度和应变率,获得了冻土在不同实验条件下的动态冲击应力-应变曲线。实验结果表明,冻土具有明显的温度效应和应变率效应。模型计算结果与实验结果符合良好,验证了所建立的动态本构模型的合理性和适用性,具有很强的工程应用价值。     

飞秒激光驱动超高应变率加载下铝材料的层裂特性

层裂损伤是材料动态损伤破坏研究中最重要的问题之一,其损伤特性和机制随加载应变率不同表现出明显的阶段性规律。超高应变率条件下材料层裂损伤特性、规律和机制研究已成为极端条件下材料动态响应研究的重要内容,在工程应用和基础研究领域均有重要意义。采用飞秒激光驱动冲击加载技术开展了超高应变率条件下铝材料的层裂损伤实验研究,利用啁啾频域干涉超快诊断方法对铝材料的层裂损伤过程进行了诊断,分析并获得了在109 s-1应变率条件下铝材料的层裂强度约为7 GPa,结合前人的研究数据,解读了铝材料层裂强度随应变率的变化规律。     

率温联合条件下混凝土材料压缩强度的变化规律

混凝土材料的动态压缩强度不仅具有明显的应变率强化(硬化)效应,同时还具有明显的温度弱化(软化)效应。在应变率和温度联合条件下,压缩强度随应变率和温度变化过程中不仅存在清晰的应变率拐折点,拐折点前后压缩强度随应变率变化速率明显不同,而且在不同温度下发生拐折时,其拐折点对应的应变率也存在明显差异。参考近年来相关文献中混凝土材料在率温联合条件下的压缩实验数据,结合理论分析,探讨了在不同温度、不同应变率条件下混凝土材料压缩强度联合效应因子K的变化规律;并对实验数据进行拟合,得到了不同应变率、不同温度下K(T)-■的预测表达式,确定了应变率强化和温度弱化对压缩强度的耦合影响;通过分析应变率拐折点与温度的关系,确定了应变率和温度联合条件下应变率敏感区和不敏感区的率温联合条件界限;建立了率温效应相当(K=1)时的率温等效方程,并确定了混凝土材料的率温等效参数。     

高应变率下硅橡胶的本构行为研究

 硅橡胶是一种高分子聚合物，可以承受大变形，用途广泛。利用改进的分离式霍普金森压杆（SHPB）实验技术，对硅橡胶试样进行了不同应变率下的冲击压缩实验，基于实验数据，利用应变能函数构建了考虑应变率效应的材料本构形式。同时，实验过程中发现，在高应变率加载条件下，材料在压缩变形后出现了损伤线区，线区直径与加载应变率及试样尺寸之间存在一定的定量关系。     

Dynamic Destruction as Analogs of Critical Phenomena in Metal Samples with Various Geometries within a Wide Ranges of Amplitude–Time Characteristics of External Action

Physics of Atomic Nuclei - The quantitative characteristics of the products of dispersion and the cascade of dissipative structures arising in metals under shock-wave loading are determined. The...     

10 MA多支路汇流装置上钽的强度实验研究

磁驱动准等熵加载技术通过电流产生的磁压力加载材料,加载路径由负载电流波形和负载结构决定。作为应变率介于静高压加载和冲击加载之间的新型实验技术,熵增小、温升低。10 MA装置是典型的多支路汇流装置,包括24个电流支路,可在较大范围内控制负载电流波形,实现mm厚、cm直径样品在不同应变率下的准等熵加载。基于10 MA装置,通过调节负载电流波形实现样品加载路径控制,在一定压力-应变率范围,开展金属钽的强度实验研究,获取了不同厚度金属钽样品的加-卸载波剖面速度历史,分析获得了钽在系列峰值压力下的强度数据,比较了多个加载平台不同加载路径下的强度数据,实验结果与美国圣地亚国家实验室的磁驱动准等熵结果接近（平均应变率都约为105 s?1）,明显高于冲击加载的流动强度,低于准静态加载获取的流动强度,与应变率增高强度会有所下降的理论预测一致。基于多支路汇流装置,未来将可开展更为丰富的材料动力学特性实验研究。     

The Effect of Small Additions of Carbon Nanotubes on the Mechanical Properties of Epoxy Polymers under Static and Dynamic Loads

The results of measurements of the mechanical characteristics of cured epoxy composites containing small and ultrasmall additions of single-walled carbon nanotubes in the concentration range from 0 to 0.133 wt % under static and dynamic loads are presented. Static measurements of strength characteristics have been carried out under standard test conditions. Measurements of the Hugoniot elastic limit and spall strength were performed under a shock wave loading of the samples at a deformation rate of (0.8–1.5) ß 10⁵ s^-1 before the fracture using explosive devices by recording and subsequent analyzing the evolution of the full wave profiles. It has been shown that agglomerates of nanotubes present in the structure of the composites after curing cause a significant scatter of the measured strength parameters, both in the static and in the dynamic test modes. However, the effects of carbon nanotube additions in the studied concentration interval on the physical and mechanical characteristics of the parameters were not revealed for both types of loading.     

泵油饱和砂岩黏弹行为的实验研究

通过Metravib热机械分析仪, 用固定静载为100 N、 正弦波动载荷为60 N的应力-应变实验方法, 在温度为-50---175 ℃, 升温速率为1 ℃/min, 频率为1---1000 Hz的条件下, 对泵油饱和长石砂岩、 彭山砂岩样品进行单轴循环加载实验, 研究了饱和多孔岩石在弹性范围内的衰减、 耗散角、 杨氏模量和弹性波波速随温度和频率的变化规律. 取得了随频率增高饱和多孔岩石的衰减峰和耗散角峰的峰位向高温方向移动的热激活弛豫规律, 并求得弛豫峰的激活能和跃迁频率, 以饱和砂岩的特点对此作出了解释. 发现岩石中矿物离子置换时的相变内耗峰, 并用动态观点解释了该相变峰. 还获得杨氏模量和弹性波波速随温度升高而下降、 随频率增高而增大的频散效应, 随温度升高频散效应有减弱的趋势. 该研究结果对理论模型研究具有指导意义, 对地震资料的解释具有实用价值.     

Kinetic concept of strength in calculations of elastomeric parts

The specific features of the kinetic concept as applied to the prediction of the lifetime of rubber parts are considered. The theoretical and experimental data on the lifetime of rubbers under uniaxial tension, combined stresses, dynamic loading with a dominant tension, and dynamic loading in the presence of a static component are analyzed consistently. Attention is drawn to the fact that standard methods can also be used to determine the strength characteristics of rubbers. It is emphasized that the methods and programs described in this paper are developed for applied purposes.     

Plastic deformation under high-rate loading: The multiscale approach

A two-level approach has been proposed for describing the plastic deformation under high-rate loading of metals. The characteristics of the motion of dislocations under shear stresses have been investigated at the atomistic level by using the molecular dynamics simulation. The macroscopic motion of a material has been described at the continuum level with the use of the model of continuum mechanics with dislocations, which uses information obtained at the atomistic level on the dislocation dynamics. The proposed approach has been used to study the evolution of the dislocation subsystem under shock-wave loading of an aluminum target. The behavior of the dynamic yield stress with an increase in the temperature has been analyzed. The results of the calculations are in good agreement with experimental data.     

铍青铜柱壳膨胀断裂研究

 利用高速摄影和金相分析研究了不同热处理状态的铍青铜（QBe2）柱壳在爆轰加载下的膨胀断裂特性。研究表明：材料的细观组织决定材料的静态力学性能与动态断裂性能。当同种材料的组织结构有较大差异时，材料的静态力学性能及动态断裂性能均会有较大改变；当材料的基体组织没有明显变化、只是基体中强化相的多少发生改变时，材料的静态力学性能会有较大差异，而材料的动态断裂性能将没有明显变化，原因在于造成静态力学性能差异的强化相在爆轰加载下的性能趋于一致。     

The experimental research on response characteristics of coal samples under the uniaxial loading process

In order to study the response characteristics of infrasound in coal samples under the uniaxial loading process, coal samples were collected from GengCun mine. Coal rock stress loading device, acoustic emission tested system and infrasound tested system were used to test the infrasonic signal and acoustic emission signal under uniaxial loading process. The tested results were analyzed by the methods of wavelet filter, threshold denoise, time–frequency analysis and so on. The results showed that in the loading process, the change of the infrasonic wave displayed the characteristics of stage, and it could be divided into three stages: initial stage with a certain amount infrasound events, middle stage with few infrasound events, and late stage gradual decrease. It had a good consistency with changing characteristics of acoustic emission. At the same time, the frequency of infrasound was very low. It can propagate over a very long distance with little attenuation, and the characteristics of the infrasound before the destruction of the coal samples were obvious. A method of using the infrasound characteristics to predict the destruction of coal samples was proposed. This is of great significance to guide the prediction of geological hazards in coal mines.     

Strain modulations of magnetism in Fe-doped InSe monolayer

First-principles calculations are performed to investigate the electronic and magnetic characteristics of Fe-doped two-dimensional (2D) InSe monolayer by applying biaxial compressive and tensile strains. Our studies show that Fe substituting indium atom can be realized easily under Se-rich experimental environments, and can induce the magnetic semiconducting characteristics. Interestingly, the magnetic moments are insensitive to the strain ~ −6% to 6% range. However, loading larger tensile strain can decrease the magnetic moments sharply. Moreover, the system still retains semiconducting characteristics under compressive strain, while a transition occurs from semiconductor to metal beyond the tensile strain 8%. These results provide the theoretical predications that Fe-doped 2D InSe material may be applied in the spintronic devices.     

液电脉冲激波特性分析

基于相应的数学模型来表征液电脉冲激波的产生和传播过程,搭建了液电式碎岩综合试验平台,分析了典型的激波特性的仿真和实测结果。给出了不同充电电压下液电脉冲激波特性的仿真结果,并分析了充电电压对激波特性的影响。结果表明:充电电压为11 kV时,激波的压力峰值为2.67 MPa,激波能量为27.30 J,波前时间为2.16μs,激波加载速率为1.24 MPa/μs,电能转化为激波能量的效率为13.35%;提高电容充电电压,激波压力峰值和激波能量增大,波前时间减少,激波加载速率增加,但电能转化为激波能量的效率降低。利用建模分析的方法,可以根据放电回路参数预测液电脉冲激波特性,从而为进一步研究激波破碎岩石的形态和效果提供理论依据。