Application of fluoroxidants for the decomposition and analysis of platinum metals and gold in black shale ores

In order to develop a reliable method for the platinum group metals (PGMs) determination in ores of organic origin like carbonaceous black shale a decomposition method with fluoroxidants like BrF₃ and KBrF₄ was established which avoids the commom losses of PGM organometallic compounds by volatilazation or chemisorption. The recovery from different trapping solutions is discussed. Platinum metals are evidently found in the carbonaceous black shale ores from the “Natalka” deposit situated in the Magadan area. PGMs are very inhomogenously distributed in the ores and ore concentrates and their total contents in ore are 5–18 g/t. The carbonaceous concentrate of black shale ore contains up to 23 g/t of the sum of platinum metals. ≥ 8% of the sum of platinum and palladium contained in this carbonaceous concentrate are soluble in organic solvents. Received: 16 July 1998 / Revised: 16 April 1999 / Accepted: 5 May 1999     

Application of fluoroxidants for the decomposition and analysis of platinum metals and gold in black shale ores

In order to develop a reliable method for the platinum group metals (PGMs) determination in ores of organic origin like carbonaceous black shale a decomposition method with fluoroxidants like BrF₃ and KBrF₄ was established which avoids the commom losses of PGM organometallic compounds by volatilazation or chemisorption. The recovery from different trapping solutions is discussed. Platinum metals are evidently found in the carbonaceous black shale ores from the “Natalka” deposit situated in the Magadan area. PGMs are very inhomogenously distributed in the ores and ore concentrates and their total contents in ore are 5–18 g/t. The carbonaceous concentrate of black shale ore contains up to 23 g/t of the sum of platinum metals. ≥ 8% of the sum of platinum and palladium contained in this carbonaceous concentrate are soluble in organic solvents. Received: 16 July 1998 / Revised: 16 April 1999 / Accepted: 5 May 1999     

锂盐-锍镍试金-等离子质谱法测定黑色页岩中铂族元素

建立锍镍试金-等离子质谱法测定黑色页岩中铂族元素(PGEs)的方法。在不减少称样量的前提下,结合黑色页岩成分特点,调整试金配料,利用硝酸钾的氧化性,解决形成锍扣难的问题;利用四硼酸锂的助融性,使盐酸溶解锍扣后黑色沉淀量大幅度降低,用等离子质谱法测定黑色页岩中铂族元素。PGEs的线性相关系数均不小于0.9995。Pt,Pd,Rh,Ir,Ru的检出限分别为0.30,0.36,0.032,0.028,0.041 ng/g。用该方法测定实际样品,测定值与参考值一致,测定结果的相对标准偏差为1.2%~10.6%(n=10)。该方法满足地质矿产实验室测试质量管理规范(DZ/T 0130-2006)的要求,可用于黑色页岩中铂族元素的测定。     

Determination of gold and the platinum group elements in geological samples by ICP-MS after nickel sulphide fire assay: difficulties encountered with different types of geological samples

Problems involved in the determination of Au and the platinum group elements by the nickel sulphide fire assay (NiS-FA) procedure for black shale samples, samples containing magnetite, and samples containing As, Cu, and Fe were studied. The interference of the graphite in black shale samples was eliminated either by roasting the sample prior to fusion or by adding an oxidant to the fusion flux. Addition of a reducing agent to samples, containing the oxygen-rich mineral magnetite, enabled the NiS-FA procedure to be carried out for this sample type. The interference of Cu on Rh in the ICP-MS determination was corrected by establishing a linear correlation between the interference of Cu on (103)Rh and (105)Pd.     

电感耦合等离子体质谱（ICP-MS）法测定碳质板岩样品中铂族元素

碳质板岩属黑色岩系,与多种金属(包括贵金属)成矿有密切的联系。按照常规的分析方法,硫镍试金溶剂配方都不能对贵金属元素有较好的富集,影响贵金属元素的测定。根据石墨岩中样品的成份特征,对测定铂族元素的常规硫镍试金配方进行了改进,增加了硝酸钾和氧化镁,且无需加入锇稀释剂。通过实验选择了合适比例配料,熔融后粉碎镍扣,加入盐酸分解,碲共沉淀剂富集。过滤沉淀用王水溶解。用电感耦合等离子体质谱(ICP-MS)法测定,Lu作内标,对碳质板样品中的铂族元素进行了测定。结果表明,加标回收率为85%～105%,能够满足碳质板岩中铂族元素的分析测定要求。     

Nanostructured catalysts for direct electrooxidation of dimethyl ether based on Bi- and trimetallic Pt–Ru and Pt–Ru–Pd alloys prepared from coordination compounds

Bi- and trimetallic platinum–ruthenium and platinum–ruthenium–palladium catalysts with specified atomic ratios Pt: Ru = 1: 1 and Pt: Ru: Pd = 1: 1: 0.1, respectively, were synthesized from the coordination compounds of the metals deposited on highly dispersed carbon black. The catalysts were characterized by powder X-ray diffraction, electron dispersive analysis, and transmission electron microscopy. According to voltammetry data, the highest activity in the dimethyl ether (DME) electrooxidation is exhibited by the catalyst Pt_0.43Ru_0.47Pd_0.1/C; hence, it may be considered as a promising anode material for direct DME fuel cells.     

Determination of noble metals by neutron-activation analysis

The scope and limitations of neutron-activation analysis in the field of the platinum metals are discussed. Special attention is given to interferences that occur in determination of noble metals in platinum metals and in natural samples. The problem of standards, carriers and chemical yield determination is emphasised. A recommendation is given of modern techniques for counting radionuclides formed by neutron activation of the platinum metals.     

Nanostructured catalysts for cathodes of oxygen-hydrogen fuel cells

Bimetallic catalysts platinum-cobalt, platinum-chromium, and platinum-tungsten, deposited onto highly dispersed carbon black from complex cluster-type compounds of corresponding metals with a 1: 1 atomic ratio of metals are developed. The catalysts are characterized by methods of x-ray diffraction analysis and energy dispersive analysis of x-rays. The procedure involving use of a thin-film rotating disk electrode is employed to probe kinetic parameters of the oxygen reduction reaction on the catalysts developed. The investigated binary catalysts exhibit specific electrochemical characteristics that are not inferior and, in some cases, are superior to the characteristics intrinsic to the commercial platinum catalyst E-TEK, when tested in the composition of a gas-diffusion electrode under conditions that are close to real conditions in which cathodes of oxygen-hydrogen fuel cells operate.     

Metal–Polymer Nanocomposites with Carbon Fillers for the Catalytic Oxidation of Formic Acid

Metal–polymer Pt–Pd nanocomposites on a Nafion polymer membrane modified with carbon nanotubes and carbon black are synthesized by the chemical reduction of ions in aqueous organic solutions of reverse microemulsions. The functional characteristics of the nanocomposites are studied by cyclic voltammetry and atomic force microscopy. The synthesized nanocomposites exhibit strong catalytic activity in the formic acid oxidation reaction. It is found that, at the optimum ratio of platinum metals, the catalytic activity of the metal–polymer composites is higher than that of the carbon nanocomposites.     

The separation of platinum and palladium by selective extraction of H(2)Pt(SCN)(6) and H(2)Pd(SCN)(4) using a polyTHF-impregnated filter

Platinum and palladium are known to form complexes with the thiocyanate ion in solution. The isolation and separation of both platinum and palladium as thiocyanate complexes is demonstrated by passing them through an organic-impregnated filter (OIF) prepared with polyTHF. Simultaneous extraction is performed by converting both metals into the extractable form. Sequential extraction is achieved by exploiting the difference in the rates of formation for the extractable complexes of the two metals. The extraction of both metals is rapid with quantitative recoveries of platinum with flow rates as high as 600 ml min⁻¹ in small samples, while recoveries from larger volume samples were considerably lower. Once extracted, the metals can be removed from the OIF by conversion to a non-extractable form with a high pH eluting solution. The rapid separation, isolation and preconcentration of both platinum and palladium from aqueous samples is demonstrated.     

电感耦合等离子体-质谱联用及其在环境和生物样品中铂族金属分析的应用进展

本文简述了电感耦合等离子体-质谱联用(LCP-MS)技术和仪器的发展,分析了环境和生物样品中铂族金属分析的主要困难,综述了90年代以来国内外ICP-MS技术在环境和生物样品中铂族金属分析的最新进展,引用文献47篇.     

A critical review of the volumetric methods for the platinum metals

The published methods for the volumetric determination of the six platinum metals have been appraised. The lack of generally applicable and accurate methods is emphasized. No volumetric method has been recorded for the direct application to solutions of platinum metals, ores, concentrates or natural alloys, and only a few for determinations in synthetic alloys such as fire assay beads. Volumetric methods for the platinum metals are characterized by the absence of data concerning methods of dissolution.     

铂族元素在环境和生物样品中的积累及毒性研究进展

由汽车尾气净化器的安装使用而导致环境中的铂族元素尤其是铂、钯、铑的含量逐渐增长,铂族元素对于生活和生态环境的影响也越来越多受到关注.论述了汽车三元催化剂中铂族元素毒性、铂族元素在环境和生物样品的分布、环境样品中铂族元素的消解、测定方法以及干扰处理方法,总结了多国测定结果并对结果进行了综合评述.     

Extraction of platinum metals from hydrochloric acid medium with triphenylphosphine solution in 1,2-dichloroethane

Extraction of platinum metals with TPP in 1,2-dichloroethane from hydrochloric acid medium has been examined. At hydrochloric acid concentrations higher than 6M, palladium, platinum and osmium are extracted, whereas at low acidity only palladium is quantitatively extracted. Addition of stannous chloride as labilizing agent makes possible a group separation of platinum metals (except osmium). Possible extraction mechanisms are discussed.     

Determination of platinum and ruthenium in Pt and Pt-Ru catalysts with carbon support by direct and derivative spectrophotometry

Platinum and ruthenium in carbon supported Pt and Pt-Ru catalysts were determined by direct and derivative spectrophotometric methods. Complexes of platinum and ruthenium with SnCl(3)(-) ligands (tin(II) chloride in HCl) were used to determine both metals in solutions obtained after digestion of the samples of the catalysts. Platinum in the Pt/C catalyst can be determined in solutions obtained by digestion of the samples in aqua regia. Derivative spectrophotometry was used to determine both metals in the presence of each other in solutions obtained after digestion of samples of the Pt-Ru/C catalyst in the mixture of HCl+HNO(3) (6:1). The first derivative at 377 nm (;zero-crossing' point of ruthenium) and the second-derivative values at 495 nm (;zero-crossing' point of platinum) were used to estimate the concentration of platinum and ruthenium, respectively.     

Dissolution of metallic platinum as water soluble species by naturally occurring complexing agents

Platinum is released into the environment as a result of surface abrasion from automobile catalysts during operation. Previous investigations showed that this finely dispersed metallic platinum is dissolved in organic matrices, e.g. a humic soil to a significantly high degree, resulting in possibly bioavailable Pt species. In this work several natural complexing agents (adenosine, ADP, ATP, L-His, humic acid fraction, L-Met, pyrophosphate, and triphosphate) were treated with metallic platinum (as Pt black and as a Pt(0) containing tunnel dust) for 3–60 d. Some of the compounds used dissolved Pt(0) to a recognizable degree, whereas others were in the range of the aqueous blanks. Comparison of Pt black with a natural dust sample showed that L-methionine had in both cases the greatest effect after 60 d. Generally more Pt(0) was dissolved in the dust sample (finer dispersion and smaller particle size) than in the Pt-black used. By carrying out the experiment under natural conditions instead of in pure oxygen-, the amounts of dissolved platinum are about one order of magnitude lower.On leave from Liaoning University, Department of Chemistry, 110036 Shenyang, PR China     

A Combined Deep Eutectic Solvent–Ionic Liquid Process for the Extraction and Separation of Platinum Group Metals (Pt,Pd, Rh)

Recovery of platinum group metals from spent materials is becoming increasingly relevant due to the high value of these metals and their progressive depletion. In recent years, there is an increased interest in developing alternative and more environmentally benign processes for the recovery of platinum group metals, in line with the increased focus on a sustainable future. To this end, ionic liquids are increasingly investigated as promising candidates that can replace state-of-the-art approaches. Specifically, phosphonium-based ionic liquids have been extensively investigated for the extraction and separation of platinum group metals. In this paper, we present the extraction capacity of several phosphonium-based ionic liquids for platinum group metals from model deep eutectic solvent-based acidic solutions. The most promising candidates, P₆₆₆₁₄Cl and P₆₆₆₁₄B2EHP, which exhibited the ability to extract Pt, Pd, and Rh quantitively from a mixed model solution, were additionally evaluated for their capacity to recover these metals from a spent car catalyst previously leached into a choline-based deep eutectic solvent. Specifically, P₆₆₆₁₄Cl afforded extraction of the three target precious metals from the leachate, while their partial separation from the interfering Al was also achieved since a significant amount (approx. 80%) remained in the leachate.     

The effects on soil/water/plant/animal systems by platinum group elements

Emissions of toxic substances such as oxides of carbon, nitrogen, sulphur, and, in addition, aromatic hydrocarbons, aldehydes and heavy metals are the most serious problem of road traffic affecting landscape. Platinum group elements (PGE), which are the main component of the catalyst, are one of the main sources of heavy metals in the environment. Here, we review the way by which emissions and forms of the emitted PGE end up in the environment especially to the soil-water-plant-animal system. The major points discussed are the following: 1) the main sources of PGE emission are automobile exhaust catalysts; 2) hospitals, where platinum is widely used to treat malignant neoplasm, and urban waste water belonging to other important sources of PGE in the environment; 3) soil is one of the most important components of the environment that may be contaminated with platinum metals; 4) phytotoxicity of PGE depends on the following conditions: the concentration of metals in the soil, time of exposure, the chemical form of metal, the chemical composition of exposed soil and plant species; 5) animals are also endangered by the increasing concentration of PGE in the environment. Moreover, we pay our attention to thiol-based mechanisms of how an organism protects itself against platinum group elements.      

Mesoporous platinum as sulfur-tolerant catalyst for PEMFC cathodes

The performance of proton exchange membrane fuel cell (PEMFC) is highly influenced by its operating conditions. One of the vital parameter is the purity of feed gases. The cathode of PEMFC is normally fed with air from the atmosphere containing certain impurities like CO₂, NO₂, and SO₂, which are the major contaminants for the electrocatalysts used in the fuel cell, causing both reversible and irreversible damages. The irreversible effect is caused due to adsorption of impurities like SO₂ on the conventionally used platinum catalyst supported on carbon (Pt/C). It has been observed that carbon facilitates the absorption of SO₂ on platinum. Hence, the present objective is to identify the catalysts containing no carbon and study their impurity tolerance in the fuel cell environment. In the present paper, we have attempted to synthesize unsupported mesoporous platinum by hard template method and studied its SO₂ impurity tolerance at the cathode side for oxygen reduction reaction (ORR) for PEMFC application. The mesoporous platinum showed for a higher tolerance towards SO₂ compared to its counterpart, viz., platinum black. Sulfur tolerance was evaluated by the sulfur coverage on the catalyst and its rate of recovery through electrochemical experiments. Mesoporous platinum has also exhibited a faster removal of adsorbed sulfur compared to the commercial microporous platinum black, revealing that the recovery is also fast comparatively for meso-structured platinum.

Open image in new window

Graphical abstract Morphology and cyclic voltammogram of mesoporous platinum (inset: sulfur coverage for mesoporous platinum and platinum black)

     

Liquid chromatography of platinum metals and prospects of development

Summary A survey of the authors' work on liquid chromatography of platinum metals in the form of chelates with 1-(2-pyridylazo)-2-naphthol (PAN) is given. Extraction chromatography with PAN in isopentanol as a stationary phase was used to achieve a group concentration of these metals (Pd, Pt and Rh, concentration coefficient 100) from large volumes of aqueous solutions and a selective extraction of palladium from solutions containing other platinum, nonferrous and heavy metals on a 85–98° C thermostatted chromatographic column. The prospects for the use of liquid chromatography in the analysis of platinum metals are discussed.

---

Flüssig-Chromatographie von Platinmetallen und zukünftige Entwicklungen