一氯乙酸和三氯乙酸在富勒烯/DDAB膜修饰电极上的电催化

研究了由阳离子表面活性剂双十二烷基二甲基溴化铵分别和C60或C70在玻碳电极表面形成的膜在0．5mol／L KCl溶液中的电化学,发现在0～-1．0V范围内,有两对峰形较好的还原再氧化峰。实验结果表明,该修饰电极有较好的稳定性和重现性,对三氯乙酸和一氯乙酸的还原,表现出良好的电催化去卤化作用,说明修饰电极上的富勒烯是良好的电子传递媒介体。     

Molecular bilayer-based superstructures of a fullerene-carrying ammonium amphiphile: structure and electrochemistry

The synthesis of a water-soluble C60-carrying single-chain ammonium amphiphile, 10- (N-methyl-2-fulleropyrrolidyl)decyltrimethylammonium bromide (1) as well as the characterization of aqueous solutions and cast films of 1 are described. X-ray diffraction study suggests that cast films of 1 form a multilayer structure based on biomembrane-like molecular bilayers. Electron microscopy has revealed that 1 produces both fibrous and disk-like aggregates with 10-12 nm of thickness through self-organization of 1 in aqueous solution. Differential scanning calorimetry, dynamic light scattering, FTIR, and UV-visible absorption studies were also carried out to characterize aqueous solutions and cast films of 1. Electrochemistry for an aqueous solution and for cast films of just 1 and 1 incorporated in lipid films on electrodes was conducted. It was found that films of just 1 and of 1/lipid cast on electrodes showed electron transfer reactions leading to the generation of the fullerene dianion or trianion. In contrast, electrochemistry of aqueous solution of 1 at a bare electrode gives a cathodic current near -0.5 to -0.6 V against SCE; however, an anodic current for the solution did not appear.     

Electrochemical behavior of C-(60) modified electrode in aqueous solutions

The construction of adsorptive type C60 modified electrode and its electrochemical reduction and oxidation behavior in aqueous solutions are described in this report. Four pairs of one-electron transfer reduction and oxidation cyclic voltammetry is obtained in aqueous solution containing 30% CH3CN and 2% (C2H5)4NOH. It is reported in this paper that the C60 modified electrode also catalyzes the electrochemical reduction of dissolved oxygen in 40% DMF and 2% (C2H5)4NOH aqueous solution and this might open a new field for the potential applications of C60 in electrochemistry and electroaualytical chemistry.     

Multilayer nitroazobenzene films covalently attached to carbon. An AFM and electrochemical study

Nitroazobenzene films have been grafted to pyrolyzed photoresist films by electrochemical reduction of the corresponding diazonium salt in acetonitrile solution. Two component films were also prepared by electrochemically grafting methylbenzene layers to preformed NAB films. Voltammetric investigation of the films in aqueous acid medium and the measurement of film thickness using atomic force microscopy (AFM) lead to new insights into film structure. In aqueous acid solution, the azobenzene groups have no detectable electroactivity and not all nitro groups in the films can be reduced. These findings point to a compact film structure in which proton diffusion is limited. There may also be spatial inhibition of the conformational changes that accompany azobenzene reduction. For increasingly thick NAB films, the peak for reduction of the nitro groups moves to more negative potentials and the peaks become more asymmetric in shape. These changes are interpreted in terms of the dielectric properties and the rate of proton diffusion in the films. Film thickness was measured by ploughing through the film with an AFM tip. When an NAB film prepared in acetonitrile solution is reduced in aqueous acid, the film thickness decreases by more than 50%. The changes can be partially reversed by treatment in acetonitrile-electrolyte solution and hence are attributed to ion-solvent induced swelling and shrinking. Thus, the large decrease in thickness detected by AFM after treatment of the film in aqueous acid is consistent with the compact film structure revealed by electrochemistry.     

Temperature programmed desorption analysis of sol-gel-derived titania films

Sol-gel-derived titania films were analyzed by temperature programmed desorption (TPD) and X-ray diffraction (XRD) techniques. The relationship between the TPD curves measured for two types of titania gel films and their crystal structures was investigated. On the basis of the analyses, a preparation process for a titania sol solution containing anatase nanocrystals was designed and developed. Using this process, a colloidal anatase titania sol solution was prepared by heating aqueous titanium hydroxide containing HCl at 60°C for 2 h. The nanocrystal structure of the titania films obtained by coating the sol on glass substrates was confirmed by TPD and XRD measurements.     

Thin wetting films from aqueous solutions of surfactants and phospholipid dispersions

The microscopic thin wetting film method was used to study the stability of wetting films from aqueous solution of surfactants and phospholipid dispersions on a solid surface. In the case of tetradecyltrimethylammonium bromide (C(14)TAB) films the experimental data for the receding contact angle, film lifetime, surface potential at the vapor/solution and solution/silica interface were used to analyze the stability of the studied films. It is shown that with increasing C(14)TAB concentration charge reversal occurs at both (vapor/solution and solution/silica) interfaces, which affects the thin-film stability. The spontaneous rupture of the thin aqueous film was interpreted in terms of the earlier proposed heterocoagulation mechanism. The presence of the mixed cationic/anionic surfactants was found to lower contact angles and suppresses the thin aqueous film rupture, thus inducing longer film lifetime, as compared to the pure amine system. In the case of mixed surfactants hetero-coagulation could arise through the formation of ionic surfactant complexes. The influence of the melting phase-transition temperature T(c) of the dimyristoylphosphatiddylcholine (DMPC) on the stability of thin films from dispersions of DMPC small unilamellar vesicles on a silica surface was studied by measuring the film lifetime and the TPC expansion rate. The stability of thin wetting films formed from dispersions of DMPC small unilamellar vesicles was investigated by the microinterferometric method. The formation of wetting films from diluted dispersions of DMPC multilamellar vesicles was studied in the temperature range 25-32 degrees C. The stability of thin film of lipid vesicles was explained on the basis of hydrophobic interactions. The results obtained show that the stability of wetting films from aqueous solutions of single cationic and mixed cationic-anionic surfactants has electrostatic origin, whereas the stability of the phospholipid film is due to hydrophobic interaction.     

Self-assembly behavior of a stimuli-responsive water-soluble [60]fullerene-containing polymer

A novel pH- and temperature-responsive water-soluble [60]fullerene-containing poly[2-(dimethylamino)ethyl methacrylate] (C60-b-PDMAEMA) was synthesized by atom transfer radical polymerization. The pH and temperature dependence of the physical properties of the aqueous C60-b-PDMAEMA solution was studied by potentiometric and conductometric titrations, UV-vis transmittance, and laser light scattering techniques. At low pH and at temperatures ranging from 25 to 55 degrees C, in addition to C60-b-PDMAEMA unimers, micelle-like aggregates are produced in the aqueous solution containing C60 hydrophobic cores and protonated PDMAEMA shells. Only unimeric C60-b-PDMAEMAs are found to exist in solution at high pH and low temperature, where PDMAEMA segments form a charge-transfer complex with C60 molecules. However, C60-b-PDMAEMA precipitates from aqueous solution at temperatures exceeding the lower critical solution temperature of PDMAEMA of approximately 45 degrees C. The pH and temperature stimuli-responsive properties of the [60]fullerene-containing polymer in aqueous solution are completely reversible.     

Formation of polyaniline/Pt nanoparticle composite films and their electrocatalytic properties

Polyaniline (PANI) thin films modified with platinum nanoparticles have been prepared by several methods, characterised and assessed in terms of electrocatalytic properties. These composite materials have been prepared by the in situ reduction of a platinum salt (K₂PtCl₄) by PANI, in a variety of solvents, resulting in the formation of platinum nanoparticles and clusters of different sizes. The further deposition of platinum clusters at spin cast thin films of PANI/Pt composites from a neutral aqueous solution of K₂PtCl₄ has also been demonstrated. Thin-film electrodes prepared from these materials have been investigated for their electrocatalytic activity by studying hydrazine oxidation and dichromate reduction. The properties of the composite materials have been determined using UV–visible spectroscopy, atomic force microscopy and transmission electron microscopy. The nature of the material formed is strongly dependent on the solvent used to dissolve PANI, the method of preparation of the PANI/Pt solution and the composition of the spin cast thin film before subsequent deposition of platinum from the aqueous solution of K₂PtCl₄.Dedicated to Professor Dr. Alan Bond on the occasion of his 60th birthday.     

Electrocatalysis of Some Biomacromolecules at C60 / DDAB Films

Electrochemically stable fullerene films made from cationic surfactant DDAB containing C₆₀ on a glassy carbon electrode were produced in an aqueous solution, and electrocatalysis of some biomacromolecules at C₆₀ / DDAB films was studied.     

Biobased films prepared from NaOH/thiourea aqueous solution of chitosan and linter cellulose

In the present study, films based on linter cellulose and chitosan were prepared using an aqueous solution of sodium hydroxide (NaOH)/thiourea as the solvent system. The dissolution process of cellulose and chitosan in NaOH/thiourea aqueous solution was followed by the partial chain depolymerization of both biopolymers, which facilitates their solubilization. Biobased films with different chitosan/cellulose ratios were then elaborated by a casting method and subsequent solvent evaporation. They were characterized by X-ray analysis, scanning electron microscopy (SEM), atomic force microscopy (AFM), thermal analysis, and tests related to tensile strength and biodegradation properties. The SEM images of the biofilms with 50/50 and 60/40 ratio of chitosan/cellulose showed surfaces more wrinkled than the others. The AFM images indicated that higher the content of chitosan in the biobased composite film, higher is the average roughness value. It was inferred through thermal analysis that the thermal stability was affected by the presence of chitosan in the films; the initial temperature of decomposition was shifted to lower levels in the presence of chitosan. Results from the tests for tensile strength indicated that the blending of cellulose and chitosan improved the mechanical properties of the films and that an increase in chitosan content led to production of films with higher tensile strength and percentage of elongation. The degradation study in a simulated soil showed that the higher the crystallinity, the lower is the biodegradation rate.     

EPR analysis of copper particles in aqueous systems

Experimental and theoretical EPR spectra of nanodispersed copper synthesized by the reduction of copper dichloride in aqueous solutions, thin films of electrolytic copper, and copper ions are analyzed. It is established that the reduction of copper dichloride in an aqueous solution in the presence of a surfactant yields copper nanoparticles. The EPR spectra are shown to be sensitive to the oxidation of copper nanoparticles in both an aqueous medium and in thin copper films prepared by electrolytic deposition.     

聚丙烯腈表面金属化新方法的研究

以硼氢化钠（ＮａＢＨ４）水溶液还原聚丙烯腈（ＰＡＮ）／金属盐络合膜后，就可得到一种新的高分子表面金属化材料．其导电性能较好，表面电阻约为１０－１～１０Ω／□通过ＵＶ、ＩＲ等分析手段证实了在高聚物和金属离子之间存在络合作用。研究了影响表面电阻的因素。通过电镜和测量还原率、电子探针微区分析，证实了还原过程中存在离子迁移     

Properties of cellulose films prepared from NaOH/urea/zincate aqueous solution at low temperature

Cellulose films were successfully prepared from NaOH/urea/zincate aqueous solution pre-cooled to −13 °C by coagulating with 5% H₂SO₄. The cellulose solution and regenerated cellulose films were characterized with dynamic rheology, ultraviolet–visible spectroscope, scanning electron microscopy, wide angle X-ray diffraction, Fourier transform infrared (FT-IR) spectrometer, thermogravimetry and tensile testing. The results indicated that at higher temperature (above 65 °C) or lower temperature (below −10 °C) or for longer storage time, gels could form in the cellulose dope. However, the cellulose solution remained a liquid state for a long time at 0–10 °C. Moreover, there was an irreversible gelation in the cellulose solution system. The films with cellulose II exhibited better optical transmittance, high thermal stability and tensile strength than that prepared by NaOH/urea aqueous solution without zincate. Therefore, the addition of zincate in the NaOH/urea aqueous system could enhance the cellulose solubility and improve the structure and properties of the regenerated cellulose films.     

Thermal study and solubility tests of films based on amaranth flour starch–protein hydrolysate

The study deals with the effect of chemical and physical modifications on thermal properties and solubility properties of films based on amaranth flour starch–protein hydrolysate. Biodegradable and edible films were prepared by casting a 25% (w/w) solution of hydrolysate containing 20% glycerol and various additions of dialdehyde starch (0, 1 and 5%). After thermal exposure of films at 65 and 95 °C (for 6 and 48 h), thermal properties of films were studied employing differential scanning calorimetry and thermogravimetric analysis. Film solubility tests were performed in an aqueous environment at 25 °C. Chemical and physical modifications of films markedly affect their thermal properties and solubility.     

Structure and electrochemistry of self-organized fullerene-lipid bilayer films

The unique properties of C(60)-bearing artificial lipids with three C(16) (lipid 1), C(14) (lipid 2), or C(12) (lipid 3) alkyl chains have been characterized by a variety of techniques, including (13)C NMR, UV/Vis, and FT-IR spectroscopies, differential scanning calorimetry (DSC), X-ray diffraction, and electrochemistry. The (13)C NMR and UV/Vis spectra show that the lipids 1-3 have a closed aziridine structure at a 6/6-ring junction of C(60). The DSC data reveal that cast films of 1 exhibit two endothermic peaks at temperature ranges of 35-40 degrees C (main transition) and 47-49 degrees C (subtransition) in air, water, and 0.5 M aqueous tetraethylammonium chloride solution, while cast films of 2 and 3 each display one endothermic peak at 50-57 degrees C. The results of temperature-dependent FT-IR and UV/Vis studies of cast films of 1-3, together with the above data, reveal that the main peak in the DSC thermogram of a film of 1 can be attributed to a typical phase transition as seen in lipid bilayer membranes, while the sub-endothermic peak seen with 1 and the peaks for 2 and 3 stem from a change in the orientation of the C(60) moieties. X-ray diffraction patterns of each of the cast films of 1-3 show a diffraction peak corresponding to the (001) plane, suggesting the formation of molecular bilayer membrane structures. Cyclic voltammograms and Osteryoung square-wave voltammograms obtained from cast films of 1-3 on basal plane pyrolytic graphite (BPG) electrodes show strong temperature dependences. Finally, the thermodynamics of the binding of nine different alkylammonium ions and two alkylphosphonium ions to the electrogenerated radical monoanions and dianions of 1-3 cast on electrodes is described.     

Structure and properties of regenerated cellulose/tourmaline nanocrystal composite films

Nanocomposite films were successfully prepared from cellulose and tourmaline nanocrystals with mean diameters of 70 nm in a 1.5 M NaOH/0.65 M thiourea aqueous solution by coagulation with 5 wt % CaCl₂ and then a 3 wt % HCl aqueous solution for 2 min. The structure and properties of the composite films were characterized by X‐ray diffraction, scanning electron microscopy, transmission electron microscopy, dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), and tensile testing. The results indicated that the tourmaline nanocrystals were dispersed in a cellulose matrix, maintaining the original structure of the nanocrystals in the composite films. The loss peaks (tan δ) in the DMA spectra and the decomposition temperatures in the DSC curves of the composite films were significantly shifted toward low temperatures, suggesting that the nanocrystals broke the partial intermolecular hydrogen bonds of cellulose, and this led to a reduction in the thermal stability. However, the nanocomposite films exhibited a homogeneous structure and dispersion of the nanocrystals. When the tourmaline content was in the range of 4–8 wt %, the composite films possessed good tensile strength (92–107 MPa) and exhibited obvious antibacterial action against Staphylococcus aureus. This work provides a potential way of preparing functional composite films or fibers from cellulose and nanoinorganic particles with NaOH/thiourea aqueous solutions. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 367–373, 2004     

血红素修饰电极及其催化氧还原性质

金属大环络合物（卟啉、酞箐、维生素Ｂ_(１２)等）修饰电极对氧、一氧化氮和其它生物物质的催化作用［１－３］引起了化学工作者的极大兴趣,血红素是一种重要的铁卟啉化合物,是血液中血红蛋白的重要组成部分,承担携氧的任务,由于其特殊的生理功能,研究血红素修饰电极的性质和作用对进一步研究开发燃料电池具有很重大的意义．卟啉在电极上的修饰有多种方法,当卟啉或金属卟啉环侧链上具有苯氨基、苯酚基、乙烯基或吡咯等取代基时［３］,可采用电氧化聚合法制备聚卟啉膜．本文采用循环伏安法在水溶液中制备了聚血红素膜电极,研究了聚…     

Room-temperature electrochemical reduction of epitaxial magnetite films to epitaxial iron films

The electrochemical reduction of oxides to metals has been studied for decades. Earlier work produced polycrystalline bulk metals. Here, we report that pre-electrodeposited epitaxial face-centered cubic magnetite thin films can be electrochemically reduced to epitaxial body-centered cubic iron thin films in aqueous solution on single-crystalline gold substrates at room temperature. This technique opens new possibilities to produce special epitaxial metal/metal oxide heterojunctions and a wide range of epitaxial metallic alloy films from the corresponding mixed metal oxides.     

Preparation and Characterization of Titania Thin Films from Aqueous Solutions

Dip- or spin-coating and characterization of titania (TiO₂) thin films from various aqueous solutions have been studied. The aqueous titanium solutions mainly used in this study were halogen- and chelate-free solutions with the concentrations up to 1.4 M derived from titanium isopropoxide (TIP) with tetramethylammonium hydroxide (TMAOH) or some alkylamines, while aqueous and alcoholic solutions containing titanium atoms stabilized chelating ligands were examined for comparison. The TiO₂ films prepared from the TIP-TMAOH solution were already crystallized at 350°C to anatase form and those formed at 600°C had high transparency and refractive indices of 2.40. No carbon residue in the film prepared at 400°C was detected by XPS. The pure anatase form was sustained up to 850°C. Interestingly, it was found that the (004) preferentially oriented anatase films were obtained from TIP-lactic acid (LA) system until 700°C. The solutions containing citric acid (CA) or alkanolamines yielded anatase and rutile form fired at the temperatures equal to or higher than 600°C. Carbon residue was detected in the film fired at 400°C. The film thickness monotonically decreased from the upper to the bottom ends of the substrate. However, it was found that the thickness uniformity was drastically improved by an addition of sucrose to the aqueous solutions. The effects of the solution composition and polyhydroxy compounds on the crystal modifications of formed films and the film uniformity are discussed.     

Aqueous solutions for low-temperature photoannealing of functional oxide films: reaching the 400 °C Si-technology integration barrier

Functional oxide films were obtained at low temperature by combination of aqueous precursors and a UV-assisted annealing process (aqueous photochemical solution deposition). For a PbTiO(3) model system, functional ferroelectric perovskite films were prepared at only 400 °C, a temperature compatible with the current Si-technology demands. Intrinsically photosensitive and environmentally friendly aqueous precursors can be prepared for most of the functional multimetal oxides, as additionally demonstrated here for multiferroic BiFeO(3), yielding virtually unlimited possibilities for this low-temperature fabrication technology.