Atmospheric chemistry of a model biodiesel fuel, CH3C(O)O(CH2)2OC(O)CH3: kinetics, mechanisms, and products of Cl atom and OH radical initiated oxidation in the presence and absence of NOx

Relative rate techniques were used to study the kinetics of the reactions of Cl atoms and OH radicals with ethylene glycol diacetate, CH3C(O)O(CH2)2OC(O)CH3, in 700 Torr of N2/O2 diluent at 296 K. The rate constants measured were k(Cl + CH3C(O)O(CH2)2OC(O)CH3) = (5.7 +/- 1.1) x 10(-12) and k(OH + CH3C(O)O(CH2)2OC(O)CH3) = (2.36 +/- 0.34) x 10(-12) cm3 molecule-1 s-1. Product studies of the Cl atom initiated oxidation of ethylene glycol diacetate in the absence of NO in 700 Torr of O2/N2 diluent at 296 K show the primary products to be CH3C(O)OC(O)CH2OC(O)CH3, CH3C(O)OC(O)H, and CH3C(O)OH. Product studies of the Cl atom initiated oxidation of ethylene glycol diacetate in the presence of NO in 700 Torr of O2/N2 diluent at 296 K show the primary products to be CH3C(O)OC(O)H and CH3C(O)OH. The CH3C(O)OCH2O* radical is formed during the Cl atom initiated oxidation of ethylene glycol diacetate, and two loss mechanisms were identified: reaction with O2 to give CH3C(O)OC(O)H and alpha-ester rearrangement to give CH3C(O)OH and HC(O) radicals. The reaction of CH3C(O)OCH2O2* with NO gives chemically activated CH3C(O)OCH2O* radicals which are more likely to undergo decomposition via the alpha-ester rearrangement than CH3C(O)OCH2O* radicals produced in the peroxy radical self-reaction.     

Synthesis, characterization, and reactivity of ferrous and ferric oxo/peroxo pivalate complexes in relation to Gif-type oxygenation of substrates

This study examines structural features and aspects of reactivity of Gif-type reagents, which depend on O2/Zn to mediate oxidation of hydrocarbons. The reagents investigated derive from the use of iron complexes with the anion of the weak carboxylic acid Me3CCO2H (pivalic acid (PivH)) in pyridine/PivH. In these solutions, the known compound [Fe3O(O2CCMe3)6(py)3] is reduced by Zn to generate yellow-green [FeII(O2CCMe3)2(py)4], which readily reverts to [Fe3O(O2CCMe3)6(py)3], and eventually to [Fe3O(O2CCMe3)6(py)3]+, upon exposure to dioxygen. All three species are equally well suited to mediate Gif-like oxygenation of substrates supported by O2/Zn. [FeIII3O(O2CCMe3)6(L)3]+ (L = H2O, py) is converted by H2O2 to afford the hexairon(III) peroxo compounds [Fe6(O2)(O)2(O2CCMe3)12(L)2] (L = Me3CCO2H, py), which feature a [Fe6(eta 2-mu 4-O2)(mu 3-O)2] core previously documented in the closely related [Fe6(O2)(O)2(O2CPh)12(H2O)2]. A similar peroxo species, [Fe6(O2)(O)2(O2CCMe3)2(O2CCF3)10(H2O)2], is obtained upon replacing all pivalate ligands by trifluoroacetate groups with the exception of those pivalates that bridge between the two [Fe3O(O2CCF3)5(H2O)]2+ units. The structure of the [Fe6(O2)(O)2] core in these peroxo species is found to range from a recliner to a butterfly-type conformation. Reduction of [Fe6(O2)(O)2(O2CCMe3)12(HO2CCMe3)2] with NaBH4 generates [Na2Fe4(O)2(O2CCMe3)10(L)(L')] (L = CH3CN, L' = Me2CO; L = L' = Me3CCO2H), which feature a [Na2Fe4(O)2] core possessing a bent butterfly conformation of the [Fe4(O)2] unit. Oxidation of the same peroxo complex by CeIV or NOBF4 regenerates the oxo-bridged [Fe3O(O2CCMe3)6(solv)3]+ (solv = EtOH, H2O, thf). Employment of the sterically encumbered 2-Me-5-Etpyridine provides the tetrairon compound [Fe4(O)2(O2CCMe3)8(2-Me-5-Etpy)2], which can be readily transformed upon treatment with H2O2 to the asymmetric peroxo complex [Fe6(O2)(O)2(O2CCMe3)12(2-Me-5-Etpy)2]. The peroxo-containing complexes oxidize both cis-stilbene and adamantane in either benzene or py/PivH, but only under forceful conditions and at very low yields. The low reactivity and high selectivity (tert/sec = 8) obtained in the oxidation of adamantane suggests that the present type of peroxo species is not directly involved in catalytic Gif-type oxygenations of adamantane.     

Synthesis and characterization of octa- and hexanuclear polyoxomolybdate wheels: role of the inorganic template and of the counterion

Eight new compounds based on [O3PCH2PO3]4- ligands and {MoV2O4} dimeric units have been synthesized and structurally characterized. Octanuclear wheels encapsulating various guests have been isolated with different counterions. With NH4+, a single wheel was obtained, as expected, with the planar CO32- guest, (NH4)12[(MoV2O4)4(O3PCH2PO3)4(CO3)2].24H2O (1a), while with the pyramidal SO32- guest, only the syn isomer (NH4)12[(MoV2O4)4(O3PCH2PO3)4(SO3)2].26H2O (2a) was characterized. The corresponding anti isomer was obtained with Na+ as counterions, Na12[(MoV2O4)4(O3PCH2PO3)4(SO3)2]39H2O (2b), and with mixed Na+ and NH4(+) counterions, Na+(NH4)11[(MoV2O4)4(O3PCH2PO3)4(SO3)2].13H2O (2d). With [O3PCH2PO3]4- extra ligands, the octanuclear wheel Li12(NH4)2[(MoV2O4)4(O3PCH2PO3)4(HO3PCH2PO3)2].31H2O (4a) was isolated with Li+ and NH4+ counterions and Li14[(MoV2O4)4(O3PCH2PO3)4(HO3PCH2PO3)2].34H2O (4c) as a pure Li+ salt. A new rectangular anion, formed by connecting two MoV dimers and two MoVI octahedra via methylenediphosphonato ligands with NH4+ as counterions, (NH4)10[(MoV2O4)2(MoVIO3)2(O3PCH2PO3)2(HO3PCH2PO3)2].15H2)O (3a), and Li9(NH4)2Cl[(MoV2O4)2(MoVIO3)2(O3PCH2PO3)2]. 22H2O (3d) as a mixed NH4+ and Li+ salt have also been synthesized. The structural characterization of the compounds, combined with a study of their behavior in solution, investigated by 31P NMR, has allowed a discussion on the influence of the counterions on the structure of the anions and their stability. Density functional theory calculations carried out on both isomers of the [(MoV2O4)4(O3PCH2PO3)4(SO3)2]12- anion (2), either assumed isolated or embedded in a continuum solvent model, suggest that the anti form is favored by approximately 2 kcal mol(-1). Explicit insertion of two solvated counterions in the molecular cavity reverses this energy difference and reduces it to less than 1 kcal mol(-1), therefore accounting for the observed structural versatility.     

Oxo-, hydroxo-, and peroxo-bridged Fe(III) phosphonate cages

A series of five Fe(III) phosphonate clusters with four different topologies is reported. The choice of coligand carboxylate plays an important role in directing the structure of the molecule. [Fe9(O)4(O2CCMe3)13(C10P)3] (1) and [Fe9(O)2(OH)(CO2Ph)10(C10P)6(H2O)2](CH3CN)7 (2; camphyl phosphonic acid, C10H17PO3H2 = C10PH2) represent two unprecedented nonanuclear Fe(III) cages having Fe9O4 and Fe9(O)2(OH) core structures, respectively. Whereas [Fe6O2(O)2(O2CCMe3)8(C10P)2 (H2O)2](CH3CN)4 (3) is a peroxo-bridged hexameric compound with an Fe6(O)2(O2) core. [Fe4(O)(O2CCMe3)4(C10P)3(Py)4](CH3CN)3 (4) and [Fe4(O)(O2CPh)4(C10P)3(Py)4](Py)3(CH3CN)2 (5; Py = pyridine) represents two tetranuclear clusters with the same Fe4O core structure.     

Cluster oxalate complexes [M3(mu3-Q)(mu2-Q2)3(C2O4)3]2- and [Mo3(mu3-Q)(mu2-Q)3(C2O4)3(H2O)3]2- (M = Mo, W; Q = S, Se): mechanochemical synthesis and crystal structure

Mechanochemical reaction of cluster coordination polymers 1infinity[M3Q7Br4] (M = Mo, W; Q = S, Se) with solid K2C2O4 leads to cluster core excision with the formation of anionic complexes [M3Q7(C2O4)3]2-. Extraction of the reaction mixture with water followed by crystallization gives crystalline K2[M3Q7(C2O4)3].0.5KBr.nH2O (M = Mo, Q = S, n = 3 (1); M = Mo, Q = Se, n = 4 (2); M = W, Q = S, n = 5 (3)). Cs2[Mo3S7(C2O4)3].0.5CsCl.3.5H2O (4) and (Et4N)1.5H0.5K{[Mo3S7(C2O4)3]Br}.2H2O (5) were also prepared. Close Q...Br contacts result in the formation of ionic triples {[M3Q7(C2O4)3](2)Br}5- in 1-4 and the 1:1 adduct {[Mo3S7(C2O4)3]Br}3- in 5. Treatment of 1 or 2 with PPh(3) leads to chalcogen abstraction with the formation of [Mo3(mu3-Q)(mu2-Q)3(C2O4)3(H2O)3]2-, isolated as (Ph4P)2[Mo3(mu3-S)(mu2-S)3(C2O4)3(H2O)3].11H2O (6) and (Ph4P2[Mo3(mu3-Se)(mu2-Se)3(C2O4)3(H2O)3].8.5H2O.0.5C2H5OH (7). All compounds were characterized by X-ray structure analysis. IR, Raman, electronic, and 77Se NMR spectra are also reported. Thermal decomposition of 1-3 was studied by thermogravimetry.     

Unusual neutral ligand coordination to arsenic and antimony trifluoride

The preparations and spectroscopic characterisation of the hydrolytically unstable As(III) complexes, [AsF(3)(OPR(3))(2)] (R = Me or Ph) and [AsF(3){Me(2)P(O)CH(2)P(O)Me(2)}] are described and represent the first examples of complexes of AsF(3) with neutral ligands. The crystal structure of [AsF(3){Me(2)P(O)CH(2)P(O)Me(2)}] contains dimers with bridging diphosphine dioxide, but there are also long contacts between the dimers to neighbouring phosphine oxide groups, completing a very distorted six-coordination at arsenic and producing a weakly associated polymer structure. The reaction of AsF(3) with OAsPh(3) affords Ph(3)AsF(2), and no arsine oxide complex was formed. Reaction of SbF(3) with OER(3) (R = Me or Ph, E = P or As), Me(2)P(O)CH(2)P(O)Me(2) and Ph(2)P(O)(CH(2))(n)P(O)Ph(2) (n = 1 or 2) in MeOH produces [SbF(3)(OER(3))(2)], [SbF(3){Me(2)P(O)CH(2)P(O)Me(2)}] and [SbF(3){Ph(2)P(O)(CH(2))(n)P(O)Ph(2)}] respectively. The X-ray structures reveal that the complexes contain square pyramidal SbF(3)O(2) cores with apical F and cis disposed pnictogen oxides. However, whilst [SbF(3)(OER(3))(2)] (R = Ph: E = P or As; R = Me: E = As) and [SbF(3){Ph(2)P(O)CH(2)P(O)Ph(2)}] are monomeric, [SbF(3){Me(2)P(O)CH(2)P(O)Me(2)}] is a dimer with bridging diphosphine dioxides producing a twelve-membered ring, and [SbF(3){Ph(2)P(O)(CH(2))(2)P(O)Ph(2)}] is a chain polymer with diphosphine dioxide bridges. In the OAsR(3) reactions with SbF(3), R(3)AsF(2) are also formed. Notably the Sb-O(P) bonds are shorter than As-O(P), despite the covalent radii (As < Sb), consistent with very weak coordination of the AsF(3). IR and multinuclear ((1)H, (19)F and (31)P) NMR data are reported and discussed. BiF(3) does not react with pnictogen oxide ligands under similar conditions and halide exchange of bismuth chloro complexes with Me(3)SnF gave BiF(3).     

Polyoxomolybdodiphosphonates: examples incorporating ethylidenepyridines

We have synthesized and structurally characterized three pyridylethylidene-functionalized diphosphonate-containing polyoxomolybdates, [{Mo(VI)O(3)}(2){Mo(V)(2)O(4)}{HO(3)PC(O)(CH(2)-3-C(5)NH(4))PO(3)}(2)](6-) (1), [{Mo(VI)(2)O(6)}(2){Mo(V)(2)O(4)}{O(3)PC(O)(CH(2)-3-C(5)NH(4))PO(3)}(2)](8-) (2), and [{Mo(V)(2)O(4)(H(2)O)}(4){O(3)PC(O)(CH(2)-3-C(5)NH(4))PO(3)}(4)](12-) (3). Polyanions 1-3 were prepared in a one-pot reaction of the dinuclear, dicationic {Mo(V)(2)O(4)(H(2)O)(6)}(2+) with 1-hydroxo-2-(3-pyridyl)ethylidenediphosphonate (Risedronic acid) in aqueous solution. Polyanions 1 and 2 are mixed-valent Mo(VI/V) species with open tetranuclear and hexanuclear structures, respectively, containing two diphosphonate groups. Polyanion 3 is a cyclic octanuclear structure based on four {Mo(V)(2)O(4)(H(2)O)} units and four diphosphonates. Polyanions 1 and 2 crystallized as guanidinium salts [C(NH(2))(3)](5)H[{Mo(VI)O(3)}(2){Mo(V)(2)O(4)}{HO(3)PC(O)(CH(2)-3-C(5)NH(4))PO(3)}(2)]·13H(2)O (1a) and [C(NH(2))(3)](6)H(2)[{Mo(VI)(2)O(6)}(2){Mo(V)(2)O(4)}{O(3)PC(O)(CH(2)-3-C(5)NH(4))PO(3)}(2)]·10H(2)O (2a), whereas polyanion 3 crystallized as a mixed sodium-guanidinium salt, Na(8)[C(NH(2))(3)](4)[{Mo(V)(2)O(4)(H(2)O)}(4){O(3)PC(O)(CH(2)-3-C(5)NH(4))PO(3)}(4)]·8H(2)O (3a). The compounds were characterized in the solid state by single-crystal X-ray diffraction, IR spectroscopy, and thermogravimetric and elemental analyses. The formation of polyanions 1 and 3 is very sensitive to the pH value of the reaction solution, with exclusive formation of 1 above pH 7.4 and 3 below pH 6.6. Detailed solution studies by multinuclear NMR spectrometry were performed to study the equilibrium between these two compounds. Polyanion 2 was insoluble in all common solvents. Detailed computational studies on the solution phases of 1 and 3 indicated the stability of these polyanions in solution, in complete agreement with the experimental findings.     

The hydrothermal syntheses and characterization of one- and two-dimensional structures constructed from metal-organic derivatives of polyoxometalates: [(Cu(bpy)2)(Cu(bpy)(H2O))(Mo5O15)(O3P(CH2)4PO3)].H2O and [(u2(tpypyz)(H2O)2)(Mo5O15)(O3PCH2CH2PO3)].5.5H2O [bpy = 2,2'-bipyridine,tpypyz = tetra(2-pyridyl)pyrazine

The hydrothermal reaction of CuSO(4).5H2O, Na2MoO(4).2H2O and 2,2'-bipyridine with the bridging diphosphonate ligand H2O3P(CH2)4PO3H2 yields the one-dimensional chain [(Cu(bpy)2)(Cu(bpy)(H2O)2)(Mo5O15)(O3P(CH2)4PO3)].H2O; the introduction of a second bridging component in the reaction of Cu(MeCO2)2.H2O, MoO3, H2O3PCH2CH2PO3H2 and tetra(2-pyridyl)pyrazine yields the network solid [(Cu2(tpypyz)(H2O)2)(Mo5O15)(O3PCH2CH2PO3)].5.5H2O.     

双帽羧桥三核钨(Ⅳ)原子簇化合物的结构研究

用新的合成途径,以Na_2WO_4·2H_2O为原料,Zn粉为还原剂,合成了三个簇合物(1)[W_3O_2(CH_3CO_2)_6(H_2O)_3]ZnBr_4·8H_2O,(2)H(W_3O_2(CH_3CO_2)_9]·5H_2O,(3)H_2Na_3[W_3O(CCH)_3(CH_3CO_2)_6(H_2)O][H_2W_(12)O_(40)]·13.5H_2O。在测定晶体结构和综合有关文献基础上,说明了反应过程,并进行了EHMO量化计算,探讨了该类型化合物的簇骼成键性质和相关的物理,化学性质。     

三重桥氧三核铁脂肪酸配合物FAB和EI质谱研究

本文报道三重桥氧三核铁脂肪酸配合物[Fe_3(μ_3～O)(μ-O_2CR)_6(H_2O)]_3~+(R=CH_3,C_2H_5,C_3H_7,C_4H_9,C_(15)H_(31)和C_(17)H_(35))的快原子轰击(FAB)和电子轰击(EI)质谱。在FAB—MS谱中观察到四种系列离子:Ⅰ.[Fe_3O(O_2CR)_n]~+n=2-6;Ⅱ.[Fe_3O(O_2CR)_nO]~+n=1-4;Ⅲ.[Fe_2O(O_2CR)_n]~+n=1-3;Ⅳ.[Fe_2(O_2CR)_n]~+n=2-4;以及与底物所形成的加合离子[Fe_3O(O_2CR)_n·NBA-1]~+n=3-5(NBA是间-硝基苄醇)。在EI—MS谱中,除上述Ⅰ—Ⅳ离子(其中n的数目略有差异)外,还观察到含三个配位水的完整阳离子[Fe_3(O_2CR)_6(H_2O)_3]~+及其与配体羧酸的加合离子[Fe_3O(0_2CR)_n(H_20)_3·RCOOH+H]~+n=4-6,(Fe_3O(O_2CR)_nO(H_2O)3·RCOOH+H]~+n=2—4和Fe(O_2CR)_n]~+n=1—3。分析了它们的断裂规律,探讨了从中所获得的有益启示。     

Mixed-valence tetra- and hexanuclear manganese complexes from the flexibility of pyridine-containing beta-diketone ligands

The reactions of [Mn3O(O2CCCl3)6(H2O)3] with 1-phenyl-3-(2-pyridyl)propane-1,3-dione (HL(1)) and 1-(2-pyridly)-3-(p-tolyl)propane-1,3-dione (HL(2)) in CH2Cl2 afford the mixed-valence Mn(II)2Mn(III)2 tetranuclear complexes [Mn4O(O2CCCl3)6(L(1))2] (1) and [Mn4O(O2CCCl3)6L2(2)] (2), respectively. Similar reactions employing [Mn3O(O2CPh)6(H2O)(py)2] with HL(1) and HL(2) give the Mn(II)3Mn(III)3 hexanuclear complexes [Mn6O2(O2CPh)8(L(1))3] (3) and [Mn6O2(O2CPh)8L3(2)] (4), respectively. Complexes 1.2CH2Cl2, 2.2CH2Cl2.H2O, 3.1.5CH2Cl2.Et2O.H2O, and 4.2CH2Cl2 crystallize in the triclinic space group P1, monoclinic space group P2(1)/c, monoclinic space group P2 1/ n, and monoclinic space group P2(1)/n, respectively. Complexes 1 and 2 consist of a trapped-valence tetranuclear core of [Mn(II)2Mn(III)2(mu4-O)](8+), and complexes 3 and 4 represent a new structural type, possessing a [Mn(II)3Mn(III)3(mu4-O)2](11+) core. The magnetic data indicate that complexes 3 and 4 have a ground-state spin value of S = 7/2 with significant magnetoanisotropy as gauged by the D values of -0.51 cm (-1) and -0.46 cm (-1), respectively, and frequency-dependent out-of-phase signals in alternating current magnetic susceptibility studies indicate their superparamagnetic behavior. In contrast, complexes 1 and 2 are low-spin molecules with an S = 1 ground state. Single-molecule magnetism behavior confirmed for 3 the presence of sweep-rate and temperature-dependent hysteresis loops in single-crystal M versus H studies at temperatures down to 40 mK.     

Reaction products and kinetics of the reaction of NO2 with γ-Fe2O3

The reaction of NO(2) with Fe(2)O(3) has relevance for both atmospheric chemistry and catalysis. Most studies have focused on hematite, α-Fe(2)O(3), as it is the thermodynamic stable state of iron oxide; however, other forms of Fe(2)O(3) naturally occur and may have different chemistries. In this study, we have investigated the reaction products and kinetics for NO(2) reacting with γ-Fe(2)O(3) powder using diffuse reflectance infrared Fourier transform spectroscopy and compared the results to those of previous studies of NO(2) reacting with α-Fe(2)O(3). Both α- and γ-Fe(2)O(3) produce surface-bound nitrate at the pressures examined in this study (24-212 mTorr); surface-bound nitrite products are observed at all pressures for γ-Fe(2)O(3) whereas nitrite was only observed on α-Fe(2)O(3) at lower pressures. Surface-bound NO(+) and Fe-NO products are observed on γ-Fe(2)O(3), which have not been observed with α-Fe(2)O(3). The reaction kinetics show a first-order dependence on NO(2) pressure and this is used to support the hypothesis of unimolecular reaction of adsorbed NO(2) with the γ-Fe(2)O(3) surface as the slow step in the reaction mechanism. The difference in product formation between NO(2) reacting with γ-Fe(2)O(3) and previous studies of α-Fe(2)O(3) illustrate the fact that care must be taken in generalizing reactivity of different polymorphs.     

Solid-state coordination chemistry of the oxomolybdate-organodiphosphonate/nickel-organoimine system: structural influences of the secondary metal coordination cation and diphosphonate tether lengths

The hydrothermal reactions of a molybdate source, a nickel(II) salt, tetra-2-pyridylpyrazine (tpyprz), and organodiphosphonic acids H(2)O(3)P(CH(2))(n)()PO(3)H(2) (n = 1-5) of varying tether lengths yielded a series of organic-inorganic hybrid materials of the nickel-molybdophosphonate family. A persistent characteristic of the structural chemistry is the presence of the [Mo(5)O(15)(O(3)PR)(2)](4)(-) cluster as a molecular building block, as noted for the one-dimensional materials [[Ni(2)(tpyprz)(2)]Mo(5)O(15)[O(3)P(CH(2))(4)PO(3)]]x6.65H(2)O (6x6.65H(2)O) and [[Ni(2)(tpyprz)(2)]Mo(5)O(15)[O(3)P(CH(2))(5)PO(3)]]x3.75H(2)O (8x3.75H(2)O), the two-dimensional phases [[Ni(4)(tpyprz)(3)][Mo(5)O(15)(O(3)PCH(2)CH(2)PO(3))](2)]x23H(2)O (3x23H(2)O) and [[Ni(3)(tpyprz)(2)(H(2)O)(2)](Mo(5)O(15))(Mo(2)O(4)F(2))[O(3)P(CH(2))(3)PO(3)](2)]x8H(2)O (5x8H(2)O), and the three-dimensional structures [[Ni(2)(tpyprz)(H(2)O)(3)]Mo(5)O(15)[O(3)P(CH(2))(3)PO(3))]]xH(2)O (4xH(2)O) and [[Ni(2)(tpyprz)(H(2)O)(2)]Mo(5)O(15) [O(3)P(CH(2))(4)PO(3)]]x2.25H(2)O (7x2.25H(2)O). In the case of methylenediphosphonic acid, the inability of this ligand to tether adjacent pentanuclear clusters precludes the formation of the common molybdophosphonate building block, manifesting in contrast a second structural motif, the trinuclear [(Mo(3)O(8))(x)(O(3)PCH(2)PO(3))(y)] subunit of [[Ni(tpyprz)(H(2)O)(2)](Mo(3)O(8))(2) (O(3)PCH(2)PO(3))(2)] (1) which had been previously observed in the corresponding methylenediphosphonate phases of the copper-molybdophosphonate family. Methylenediphosphonic acid also provides a second phase, [Ni(2)(tpyprz)(2)][Mo(7)O(21)(O(3)PCH(2)PO(3))]x3.5H(2)O (9x5H(2)O), which contains a new heptamolybdate cluster [Mo(7)O(21)(O(3)PCH(2)PO(3))](4)(-) and a cationic linear chain [Ni(tpyprz)](n)(4n+) substructure. The structural chemistry of the nickel-molybdophosphonate series contrasts with that of the corresponding copper-molybdophosphonate materials, reflecting in general the different coordination preferences of Ni(II) and Cu(II). Consequently, while the Cu(II)-organic complex building block of the copper family is invariably the binuclear [Cu(2)(tpyprz)](4+) subunit, the Ni(II) chemistry with tpyprz exhibits a distinct tendency toward catenation to provide [Ni(3)(tpyprz)(2)](6+), [Ni(4)(tpyprz)(3)](8+), and [Ni(tpyprz)](n)(4n+) building blocks as well as the common [Ni(2)(tpyprz)](4+) moiety. This results in a distinct structural chemistry for the nickel(II)-molybdophosphonate series with the exception of the methylenediphosphonate derivative 1 which is isostructural with the corresponding copper compound [[Cu(2)(tpyprz)(H(2)O)(2)](Mo(3)O(8))(2)(O(3)PCH(2)PO(3))] (2). The structural chemistry of the nickel(II) series also reflects variability in the number of attachment sites at the molybdophosphonate clusters, in the extent of aqua ligation to the Ni(II) tpyprz subunit, and in the participation of phosphate oxygen atoms as well as molybdate oxo groups in linking to the nickel sites.     

Zeolite ionic crystals assembled through direct incorporation of polyoxometalate clusters within 3D metal-organic frameworks

Polyoxometalate-based metal-organic frameworks {[Gd(dpdo)(4)(H(2)O)(3)](PMo(12)O(40))(H(2)O)(2)CH(3)CN}(n) (2), {[Dy(dpdo)(4)(H(2)O)(3)](PMo(12)O(40))(H(2)O)(20CH(3)CN}(n) (3), {[Gd(dpdo)(4)(H(2)O)(3)](H(3)O)(SiMo(12)O(40))(dpdo)(0.5)(CH(3)CN)(0.5) (H(2)O)(3)}(n) (4), {[Ho(dpdo)(4)(H(2)O)(3)](H(3)O)(SiMo(12)O(40))(dpdo)(0.5)(CH(3)CN)(0.5)(H(2)O)(3)}(n) (5), {[Ni(dpdo)(2)(CH(3)CN) (H(2)O)(2)](2)(SiMo(12)O(40))(H(2)O)(2)}(n) (6), and {[Ni(dpdo)(3)](4)(PW(12)O(40))(3)[H(H(2)O)(27)(CH(3)CN)(12)]}(n) (7) (where dpdo is 4,4'-bipyridine-N,N'-dioxide) were constructed via self-assembly by embedding Keggin-type polyanions within the intercrystalline voids as guests or pillars. Compounds 2 and 3 are isomorphic and exhibit three-dimensional (3D) noninterwoven 64 frameworks with distorted-honeycomb cavities occupied by the polyanions. Compounds 4 and 5 are comprised of 3D noninterwoven frameworks formed by linking the adjacent folded sheets through hydrogen bonds and pi-pi stacking interactions relative to the free isolated dpdo ligand. Compound 6 is a pillar-layered framework with the [SiMo(12)O(40)](4-) anions located on the square voids of the two-dimensional bilayer sheets formed by the dpdo ligands and nickel(II) ions. Compound 7 is a 3D metal-organic framework formed by nickel(II) and 4,4'-bipyridine-N,N'-dioxide with the globular Keggin-structure [PW(12)O(4)](3-) anion as the template. A large protonated water cluster H(+)(H(2)O)(27) is trapped and stabilized within the well-modulated cavity.     

Synthesis and characterization of high nuclearity iron(III) phosphonate molecular clusters

Three new phosphonic acid ligands (4- (t)butylphenyl phosphonic acid, 3,5-dimethylphenyl phosphonic acid, and diphenylmethylphosphonic acid) have been synthesized and employed in search of high molecularity iron(III) clusters. The cluster compounds are characterized by single crystal X-ray diffraction and magnetic measurements. The solvothermal reaction of FeCl 3.6H 2O with diphenylacetic acid and p- (t)butylphenyl phosphonic acid resulted in an unprecedented dodecanuclear cluster [Fe 12(mu 2-O) 4(mu 3-O) 4(O 2CCHPh 2) 14(4- (t)buPhPO 3H) 6]( 1) having a double butterfly like core structure. [Fe 12(mu 2-O) 4(mu 3-O) 4(O 2CPh) 14(C 10H 17PO 3H) 6]( 2), another dodecanuclear cluster having core structure similar to 1, has been synthesized in a reaction between [Fe 3O(O 2CPh) 6(H 2O) 3]Cl and camphylphosphonic acid in the presence of triethylamine at ambient condition. 3,5-Dimethylphenyl phosphonic acid on reacting solvothermally with an oxo-centered iron triangle [Fe 3O(O 2CCMe 3) 6(H 2O) 3]Cl gives a nonanuclear cluster [Fe 9(mu 3-O) 4(O 3PPh(Me) 2) 3(O 2CCMe 3) 13]( 3) having icosahedral type core structure where three positions of the iron atoms have been replaced by phosphorus. Another nonanuclear [Fe 9(O) 3(OH) 3(O 3PCHPh 2) 6(O 2CCMe 3) 6(H 2O) 9] ( 4), having a distorted cylindrical core structure, has been synthesized in a similar solvothermal reaction between [Fe 3O(O 2CCMe 3) 6(H 2O) 3]Cl and biphenylmethyl phosphonic acid. All compounds are characterized by IR spectra, elemental analysis, as well as single crystal X-ray analysis. Magnetic measurements for all the compounds reveal that there are antiferromagnetic interactions between the metal centers.     

Hydrogen isotope effects and mechanism of aqueous ozone and peroxone decompositions

Hydrogen peroxide exalts the reactivity of aqueous ozone by reasons that remain obscure. Should H2O2 enhance free radical production, as it is generally believed, a chain mechanism propagated by (.OH/.O2-) species would account for O3 decomposition rates in neat H2O, HR-O3, and in peroxone (O3 + H2O2) solutions, HPR-O3. We found, however, that: (1) the radical mechanism correctly predicts HR-O3 but vastly overestimates HPR-O3, (2) solvent deuteration experiments preclude radical products from the (O3 + HO2-) reaction. The modest kinetic isotope effect (KIE) we measure in H2O/D2O: HR-O3/DR-O3 = 1.5 +/- 0.3, is compatible with a chain process driven by electron- and/or O-atom transfer processes. But the large KIE found in peroxone: HPR-O3/DPR-O3 = 19.6 +/- 4.0, is due to an elementary (O3 + HO2-) reaction involving H-O2- bond cleavage. Since the KIE for the hypothetical H-atom transfer: O3 + HO2- HO3. +.O2-, would emerge as a KIE1/2 factor in the rates of the ensuing radical chain, the magnitude of the observed KIE must be associated with the hydride transfer reaction that yields a diamagnetic species: O3 + HO2- HO3- + O2. HO3-/H2O3 may be the bactericidal trioxide recently identified in the antibody-catalyzed addition of O2(1Deltag) to H2O.     

Tetranuclear clusters containing a CrIII-doped MnIII4O2 core: syntheses, structures, and magnetic properties

The oxidation of MnII carboxylates by (NBu4)Cr2O7 in the presence of different phosphonic acids and chelating ligands results in six CrIII-doped tetranuclear manganese clusters formulated [Mn3CrO2(O2CCH3)4(O3PC5H4N)2(bpy)2] (1), [Mn3CrO2(O2CCH3)4(O3PC5H4N)2(phen)2] (2), [Mn3CrO2(O2CPh)4(O3PC5H4NO)2(phen)2] (3), [Mn3CrO2(O2CPh)4(O3PC6H11)2(bpy)2] (4), [Mn 3CrO2(O2CPh)4(O3PC6H11)2(phen) 2] (5), and [Mn3CrO2(O2CCH3)4(O3PC6H11)2(bpy)2] (6). Single-crystal X-ray analyses reveal that all the compounds contain similar [M4O2]8+ cores with the four metal sites arranged in planar topologies. The metal ions within the core are bridged by both carboxylate and phosphonate ligands. Temperature-dependent magnetic measurements show that in all cases dominant antiferromagnetic interactions are propagated between the metal centers. The ac magnetic measurements on compounds 5 and 6 reveal that both the in-phase and the out-of-phase signals are frequency dependent, characteristic of single-molecule magnet behaviors.     

Mononuclear and mixed-valence binuclear oxovanadium complexes with benzimidazole-derived chelating agents

Oxovanadium complexes with H(2)bzimpy (2,6-bis[benzimidazol-2'-yl]pyridine) and Me(2)bzimpy (2,6-bis[N'-methylbenzimidazol-2'-yl]pyridine), and H(3)ntb (tris[benzimidazol-2'-yl-methyl]amine) and Me(3)ntb (tris[N'-methylbenzimidazol-2'-yl-methyl]amine) have been synthesized. Dioxovanadium(V) and oxovanadium(IV) complexes prepared from H(2)bzimpy and Me(2)bzimpy are [V(V)O(2)(Hbzimpy)].1.25H(2)O (1), [V(V)O(2)(Me(2)bzimpy)](ClO(4)).H(2)O (3), [V(IV)O(H(2)bzimpy)(H(2)O)(2)](CF(3)SO(3))(2).2H(2)O (2), and [V(IV)O(Me(2)bzimpy)(H(2)O)(2)](CF(3)SO(3))(2) (4). H(3)ntb and Me(3)ntb afforded oxovanadium(IV) complexes, [V(IV)O(Hntb)].2MeOH (5), [V(IV)O(H(3)ntb)Cl]Cl.H(2)O (7), [V(IV)O(Me(3)ntb)SO(4)].H(2)O (9), [V(IV)O(Me(3)ntb)Cl]Cl.H(2)O (10), and mixed-valence complexes, [(H(3)ntb)V(IV)O(mu-O)V(V)O(H(3)ntb)](CF(3)SO(3))(3).2H(2)O (8) and [(Me(3)ntb)V(IV)O(mu-O)V(V)O(Me(3)ntb)](CF(3)SO(3))(3).3H(2)O (11). Crystal structures of 2, 7, and 11 are reported. The mixed-valence complexes, 8 and 11, show 15-line isotropic ESR spectra in fluid solutions at room temperature. These compounds also exhibit an intervalence transfer band around 1015 nm which is essentially independent of solvent, so these compounds are stable, mixed-valence species where the single unpaired electron is delocalized over the two vanadium centers at ambient temperature. With respect to one-electron reduction, the dioxovanadium(V) complexes are redox-potential equivalent with their monooxovanadium(IV) counterparts.     

含“CCl_3”或“C≡C”基团的酯类化合物的合成与表征

本文合成了六个含“ＣＣｌ３”或“ＣＣ”基团的酯类化合物（［Ｃｌ３ＣＣ（Ｏ）ＯＣＨ２］２１;ｐ－（Ｃｌ３ＣＣ（Ｏ）Ｏ）２Ｃ６Ｈ４２;（Ｃｌ３ＣＣ（Ｏ）Ｏ）３Ｃ３Ｈ５３;（Ｃｌ３ＣＣ（Ｏ）ＯＣＨ２）４Ｃ４;Ｃｌ３ＣＣ（Ｏ）ＯＣＨ２ＣＣＨ５;Ｃ６Ｈ５Ｃ（Ｏ）ＯＣＨ２ＣＣＨ６）并对其进行了Ｃ／Ｈ分析、ＩＲ、１ＨＮＭＲ等项表征,对化合物５、６进行了质谱分析。     

Theoretical studies of molybdenum peroxo complexes [MoOn(O2)3-n(OPH3)] as catalysts for olefin epoxidation

The equilibrium geometries of the molybdenum oxo/peroxo compounds MoOn(O2)3-n and the related complexes [MoOn(O2)3-n(OPH3)] and [MoOn(O2)3-n(OPH3)(H2O)] (n = 0-3) have been calculated using gradient-corrected density-functional theory at the B3LYP level. The structures of the peroxo complexes with ethylene ligands [MoOn(O2)3-n(C2H4)] and [MoOn(O2)3-n(OPH3)(C2H4)] (n = 1, 2) where ethylene is directly bonded to the metal have also been optimized. Calculations of the metal-ligand bond-dissociation energies show that the OPH3 ligand in [MoOn(O2)3-n(OPH3)] is much more strongly bound than the ethylene ligand in [MoOn(O2)3-n(C2H4)]. This makes the substitution of phosphane oxide by olefins in the epoxidation reaction unlikely. An energy-minimum structure is found for [MoO(O2)2(OPH3)(C2H4)], for which the dissociation of C2H4 is exothermic with D0 = -5.2 kcal/mol. The reaction energies for the perhydrolysis of the oxo complexes with H2O2 and the epoxidation of ethylene by the peroxo complexes have also been calculated. The peculiar stability of the diperoxo complex [MoO(O2)2(OPH3)(H2O)] can be explained with the reaction energies for the perhydrolysis of [MoOn(O2)3-n(OPH3)(H2O)]. The first perhydrolysis step yielding the monoperoxo complex is less exothermic than the second perhydrolysis reaction, but the further reaction with H2O2 yielding the unknown triperoxo complex is clearly endothermic. CDA analysis of the metal-ethylene bond shows that the binding interactions are mainly caused by charge donation from the ligand to the metal.