Chemical vapor deposition growth of phase-selective inorganic lead halide perovskite films for sensitive photodetectors

Inorganic lead halide perovskites are attractive optoelectronic materials owing to their relative stability compared to organic cation alternatives.The chemical vapor deposition(CVD) method offers potential for high quality perovskite film growth.The deposition temperature is a critical parameter determining the film quality owing to the melting difference between the precursors.Here,perovskite films were deposited by the CVD method at various temperatures between 500-800℃.The perovskite phase converts from CsPb₂Br₅ to CsPbBr₃ gradually as the deposition temperature is increased.The grain size of the perovskite films also increases with temperature.The phase transition mechanism was clarified.The photoexcited state dynamics were investigated by spatially and temporally resolved fluorescence measurements.The perovskite film deposited under 750℃ condition is of the CsPbBr₃ phase,showing low trap-state density and large crystalline grain size.A photodetector based on perovskite films shows high photocurrent and an on/off ratio of ~2.5×10⁴.     

Synthesis and magnetic properties of complexes of a conjugated hyperbranched polymer containing bithiazole rings

A novel conjugated hyperbranched polymer containing bithiazole rings（PBTADB） was synthesized by polycondensation of 1,3,5-benzenetricarboxaldehyde and 2,2’-diamino-4,4’-bithiazole（DABT）.The structure of the hyperbranched polymer was confirmed by FT-IR and ¹H-NMR.PBTADB dissolved in organic polar solvents such as DMSO and NMP.Bithiazole rings were introduced to provide bidentate N-donor sites for binding metal ions.The metal complexes were prepared by chelation of the polymer with Co²⁺ and Sm³⁺.The magnetic behavior of coordination compounds was measured as a function of magnetic field strength（0-4.8×10⁶ A/m） at 5 K and as a function of temperature（5-300 K） at magnetic field strength of 2.4×10⁶ A/m.The magnetic hysteresis loops of PBTADB-Sm³⁺and PBTADB-Co²⁺showed the typical ’S’ shape at 5 K with the Curie-Weiss temperature T_θ=96 K and 41 K respectively.The results show that they exhibit properties of soft ferromagnetic materials.     

Supramolecular assembly of Keggin polyoxomolybdate and 2,2’-bipyridine generated in situ from a decarboxylation coupling reaction

An assembly of Keggin polyoxomolybdate and organic substrate（Hbipy）₃[PMo₁₂O₄₀]（1,bipy=2,2’-bipyridine） was synthesized and characterized by elemental analysis,infrared spectrum,and single-crystal X-ray analysis.The ligand bipy of compound 1 was generated by a decarboxylation coupling reaction of H₂pdc（H₂pdc=pyridine-2,6-dicarboxylic acid） in situ under hydrothermal reaction conditions and the control experiments illustrate that La（NO₃）₃ or Ce（NO₃）₃,which does not appear in the final structure,is necessary for the decarboxylation coupling reaction.Moreover,compound 1 displays strong photoluminescence property in the solid state at room temperature.     

A 3D conducting scaffold with in-situ grown lithiophilic Ni_2P nanoarrays for high stability lithium metal anodes

Lithium(Li)metal is the most potential anode material for the next-generation high-energy rechargeable batteries.However,intrinsic surface unevenness and‘hostless’nature of Li metal induces infinite volume effect and uncontrollable dendrite growth.Herein,we design the in-situ grown lithiophilic Ni₂P nanoarrays inside nickel foam(PNF).Uniform Ni₂P nanoarrays coating presents a very low nucleation overpotential,which induces the homogeneous Li deposition in the entire spaces of three-dimensional(3D)metal framework.Specifically,the lithiophilic Ni₂P nanoarrays possess characteristics of electrical conductivity and structural stability,which have almost no expansion and damage during repeating Li plating/stripping.Therefore,they chronically inhibit the growth of Li dendrites.This results in an outstanding Coulombic efficiency(CE)of 98% at 3 mA cm^-2 and an ultra long cycling life over 2000 cycles with a low overpotential.Consequently,the PNF-Li||LiFePO₄ battery maintains a capacity retention of 95.3% with a stable CE of 99.9% over 500 cycles at 2 C.     

Rare earth metal triflates catalyzed electrophilic nitration using N2O5

A mild,efficient and eco-friendly process for the electrophilic nitration is described using N₂O₅ as a green nitrating agent in the presence of rare earth metal triflates[RE（OTf）₃]under mild conditions.     

The preparation of terephthalic acid by solvent-free oxidation of p-xylene with air over T（p-C1）PPMnC1 and Co（OAc）2

An attempt has been made to prepare terephthalic acid（TPA） by solvent-free oxidation of p-xylene（PX） with air over tetra（pchlorophenylporphinato） manganese chloride（T（p-Cl）PPMnCl） and cobalt acetate.The co-catalysis between T（p-Cl）PPMnCl and Co（OAc）₂ has been discovered under solvent-free conditions.TPA yield could be increased significantly when T（p-Cl）PPMnCl and Co（OAc）₂ were used together.The addition of T（p-Cl）PPMnCl into the reaction mixture over Co（OAc）₂ significantly accelerated the rate-determining step of the oxidation process of PX to TPA.The effect of temperature on reaction was also investigated.     

Influence of Ligand with Fine Difference at Donor Site on MMCT Property in Binuclear Mixed Valence Complexes

To investigate how the electronic effect of ligand at donor site influences electronic communication or metal-to-metal charge transfer(MMCT)properties in similar mixed-valence(MV)complexes,a series of binuclear organometallic complexes,MeCp(dppe)RuCNFeCl₃(1),MeCp(PPh₃)₂RuCNFeCl₃(2),Cp^*(dppe)FeCNFeCl₃(3),Cp^*(dppe)RuCNFeCl₃(4)and Cp^*(PPh₃)₂RuCNFeCl₃(5),have been synthesized and characterized.The electronic absorptions of these complexes show the presence of MMCT properties between RuⅡ or FeⅡ and FeⅢ ions,strongly supported by the theoretical calculations.With increasing electron-donating ability of ligands(PPh3>dppe,Cp^*>MeCp)at donor site,the MMCT absorption bands are red-shifted,which expresses in the sequence of absorption bands with 1(500 nm),4(536 nm),2(542 nm),5(580 nm)from high-energy to low-energy.Meanwhile,the MMCT absorption energy of 4(536 nm)is larger than that of 3(760 nm)due to the stronger electron-donating ability of FeⅡ than RuⅡ.Furthermore,these complexes belong to the Class Ⅱ systems according to the Robin and Day’s classification.     

Syntheses and characterization of poly(iminophenol)s derived from 4-bromobenzaldehyde: Thermal, optical, electrochemical and fluorescent properties

Schiff base monomers[2-（4-bromobenzylideneamino）phenol and 2-（4-bromobenzylideneamino）-5-methylphenol] were synthesized by the condensation reaction of 4-bromobenzaldehyde with aromatic aminophenols.Then,the monomers were converted to their polyphenol derivatives by oxidative polycondensation reactions（OP） in an aqueous alkaline medium. The structures of the synthesized compounds were characterized by solubility tests,FT-IR,NMR,TG-DTA,DSC and SEC techniques.The HOMO-LUMO energy levels and electrochemical（E_g ） and optical（E_g） band gaps were calculated from cyclic voltammetry（CV） and UV-Vis measurements,respectively.Cyclic voltammetry（CV） was used to determine the electrochemical oxidation-reduction characteristics.Optical properties were investigated by UV-Vis and fluorescence analyses.Solid state electrical conductivities were measured on polymer films by four point probe technique using a Keifhley 2400 electrometer.The effects of electron-donating（-CH₃） group at p-position of -NH₂ group in aminophenol on electrochemical and thermal properties were also discussed.Photoluminescence（PL） properties of the synthesized materials were determined in solution forms using different solvents.Fluorescence measurements were carried out in various concentrated solutions to determine the optimum concentrations to obtain the maximal PL intensities.     

Synthesis and characterization of highly soluble aromatic polyimides

Two highly soluble aromatic polyimides were synthesized successfully from a diamine with two tert-butyl groups （MBTBA）and dianhydrides with a thioether or sulfone moiety（DTDA and DSDA）.Both of them showed excellent solubility in common solvents such as chloroform,tetrahydrofuran and dioxane at the room temperature.The number-average molecular weight was 6.0×10⁴ and 8.3×10⁴ according to gel permeation chromatography relative to a polystyrene standard,and the polydispersity index was 1.80 and 1.82 respectively.The glass-transition temperatures of them were 286℃and 314℃（or 315℃and 358℃）respectively,as measured by differential scanning calorimetry（or dynamic mechanical analysis）.The 5%weight loss temperature of both was near 490℃in N₂ by thermogravimetric analysis.These results indicated that the tert-butyl pendent groups reduced the interactions among polymer chains and the thioether or sulfone moiety was flexible which may improve their solubility in conventional organic solvents without the loss of thermal stability. Transparent and flexible films of the two polyimides were obtained via solution casting.The MBTBA-DTDA membrane had higher storage moduli than those of the MBTBA-DSDA membrane.     

晶态氮化碳薄膜的低温合成

The synthesis of carbon nitride films at low temperature has been investigated using pulsed arc discharge from methanol solution with nitrogen atmosphere. Raman spectra and X-ray diffraction (XRD) analysis suggest that crystalline carbon nitride films may be prepared at low substrate temperature (220 ℃). At same time, the substrate temperature has a significantly effect on the nitrogen content and structure of the films. Increasing substrate temperature (300 ℃) would decrease the content of nitrogen in the films and result in a formation of carbon films.     

Preparation of nanocrystalline Na2ZrO3 for high-temperature CO2 acceptors:chemistry and mechanism

Nanocrystalline Na₂ZrO₃ was demonstrated as a promising acceptor for CO₂ capture at elevated temperatures.The mechanism of nanocrystalline Na₂ZrO₃ formation from the soft-chemistry route is elucidated by varying precursors,preparation methods,and calciantion temperatures, combining detailed characterizations by X-ray diffraction（XRD） and scanning electron microscope（SEM） at different steps in the process. The results revealed that the drying method such as spraying drying and simple evaporation-drying did not influence the final product properties. However both Na and Zr precursors had remarkable influences on the Na₂ZrO₃ formation.The solid reaction of Na intermediate and nanocrystalline ZrO₂ in the calcination was identified as the key step for the Na₂ZrO₃ formation,where the formation of molten phase Na intermediate was found to be crucial to facilitate the solid reaction.We provided principles for rational design of the chemistry for the Na₂ZrO₃ formation where the formation of Na intermediate with low melting points is essential.Pure nanocrystalline Na₂ZrO₃ can be synthesized from a mixture containing sodium nitrate and zirconoxy citrate via the formation of NaNO₃ with low melting point.However,it is not possible to form pure nanocrystalline Na₂ZrO₃ at relatively low temperatures from the mixtures of NaAc/ZrO（NO₃）₂ or NaCA/ZrOCl₂ due to the formation of Na₂CO₃ and NaCl with high melting points.     

Optical band gap and conductivity measurements of polypyrrole-chitosan composite thin films

Electrical conductivity and optical properties of polypyrrole-chitosan（PPy-CHI） conducting polymer composites have been investigated to determine the optical transition characteristics and energy band gap of composite films.The two electrode method and I-V characteristic technique were used to measure the conductivity of the PPy-CHI thin films,and the optical band gap was obtained from their ultraviolet absorption edges.Depending upon experimental parameter,the optical band gap（E_g） was found within 1.30-2.32 eV as estimated from optical absorption data.The band gap of the composite films decreased as the CHI content increased.The room temperature electrical conductivity of PPy-CHI thin films was found in the range of 5.84×10^-7-15.25×10^-7 S·cm^-1 depending on the chitosan content.The thermogravimetry analysis（TGA） showed that the CHI can improve the thermal stability of PPy-CHI composite films.     

Regeneration of C4H10 dry reforming catalyst by nonthermal plasma

Carbon deposition via coke formation is one of the critical problems causing catalyst deactivation during the reforming of hydrocarbons.An effort was made to regenerate the catalyst（Ni/7-alumina） by oxidation methods.Two approaches were carried out for the regeneration of the deactivated catalyst.The first one involves the plasma treatment of the deactivated catalyst in the presence of dry air over a temperature range of 300～500℃,while the second one only the thermal treatment in the same temperature range.The performance of the regenerated catalyst was evaluated in terms of C₄H₁₀ and CO₂ conversions and the physicochemical characteristics were examined using a surface area analyzer,an elemental analyzer,scanning electron microscopy（SEM） and transmission electron microscopy（TEM）.It was observed that the carbon deposit （coke） on the catalyst was about 9.89 wt%after reforming C₄H₁₀ for 5 h at 540℃.The simple thermal treatment at 400℃reduced carbon content to 6.59 wt%whereas it was decreased to 3.25 wt%by the plasma and heat combination.The specific surface area was fully restored to the original state by the plasma-assisted regeneration at 500℃.As far as the catalytic activity is concerned,the fresh and regenerated catalysts exhibited similar C₄H₁₀ and CO₂ conversion efficiencies.     

Porous Iron-and Cobalt-based Single Crystals with Enhanced Electrocatalysis Performance

Porous single crystals have the characteristics of long-range ordering structure and large specific surface area,which will significantly enhance their electrochemical performance.Here,we report a method different from the conventional porous single crystal growth method.This method is to directly convert single crystal precursors Co₃O₄ and Fe₃O₄ into Co₂N and Fe₂N,and then further reduces them to porous single crystals Co and Fe particles under H2/Ar atmosphere.The removal of O^2–in the lattice channel at the pressure of 25~300 torr and the temperature of 300~600℃ will promote nitridation of the single-crystalline Co–O and Fe–O frames,and further remove N^3–in H2/Ar atmosphere and recrystallize as Co and Fe.These porous single crystals exhibit enhanced electrochemical properties due to their structural coherence and highly active surface.We demonstrated that the aminobenzene yield was up to 91%and the selectivity reached 92%in the electrochemical reduction of nitrobenzene.     

Influence of alkali metal doping on surface properties and catalytic activity/selectivity of CaO catalysts in oxidative coupling of methane

Surface properties （viz. surface area, basicity/base strength distribution, and crystal phases） of alkali metal doped CaO （alkali metal/Ca= 0.1 and 0.4） catalysts and their catalytic activity/selectivity in oxidative coupling of methane （OCM） to higher hydrocarbons at different reaction conditions （viz. temperature, 700 and 750 ℃; CH4/O2 ratio, 4.0 and 8.0 and space velocity, 5140-20550 cm^3 ·g^-1·h^-1） have been investigated. The influence of catalyst calcination temperature on the activity/selectivity has also been investigated. The surface properties （viz. surface area, basicity/base strength distribution） and catalytic activity/selectivity of the alkali metal doped CaO catalysts are strongly influenced by the alkali metal promoter and its concentration in the alkali metal doped CaO catalysts. An addition of alkali metal promoter to CaO results in a large decrease in the surface area but a large increase in the surface basicity （strong basic sites） and the C2＋ selectivity and yield of the catalysts in the OCM process. The activity and selectivity are strongly influenced by the catalyst calcination temperature. No direct relationship between surface basicity and catalytic activity/selectivity has been observed. Among the alkali metal doped CaO catalysts, Na-CaO （Na/Ca = 0.1, before calcination） catalyst （calcined at 750 ℃）, showed best performance （C2＋ selectivity of 68.8% with 24.7% methane conversion）, whereas the poorest performance was shown by the Rb-CaO catalyst in the OCM process.     

Supercritical carbon dioxide assisted synthesis of amphiphilic graft copolymers based on poly(styrene-co-maleic anhydride) with methoxyl poly(ethylene glycol) side chains

Supercritical carbon dioxide（scCO₂） was used as a reaction medium in synthesizing amphiphilic graft copolymers composed of poly（styrene-co-maleic anhydride）（SMA） backbones and methoxyl poly（ethylene glycol）（MPEG） side chains via esterification.The synthesized copolymers were characterized by Fourier transform infrared spectroscopy（FTIR）,gel permeation chromatography（GPC）,¹H-NMR,thermo-gravimetric analysis（TGA） and differential scanning calorimetric analysis（DSC）.The gelation phenomenon was suppressed effectively by tuning reaction conditions.The influences of scCO₂ temperature and pressure on the conversion of anhydride were investigated.It was found that the highest conversion ratio occurred at 80℃under a constant pressure of 14 MPa or 26 MPa.With the increase of scCO₂ pressure,the conversion ratio increased first,and then leveled off.The conversion ratio of anhydride could be controlled by regulating the reaction conditions.It was also revealed that using low molecular weight MPEG brought a high conversion ratio of anhydride.     

Photo-piezoelectric synergistic degradation of typical volatile organic compounds on BaTiO3

Explore the photo-piezoelectric synergistic micro-mechanism by density functional theory（DFT） calculations at the electronic and atomic level is important. In this work, to understand the synergistic mechanism, atomic and electronic properties of typical piezoelectric and photocatalytic material BaTiO₃ were initially investigated with different strains. Subsequently, the adsorption of volatile organic compounds（VOCs） on the BaTiO₃（001） surface was determined during the piez...     

Photo-piezoelectric synergistic degradation of typical volatile organic compounds on BaTiO3

Explore the photo-piezoelectric synergistic micro-mechanism by density functional theory（DFT） calculations at the electronic and atomic level is important. In this work, to understand the synergistic mechanism, atomic and electronic properties of typical piezoelectric and photocatalytic material BaTiO₃ were initially investigated with different strains. Subsequently, the adsorption of volatile organic compounds（VOCs） on the BaTiO₃（001） surface was determined during the piez...     

催化等离子体反应器中低浓度硝基苯的消除

Oxidative decomposition of dilute nitrobenzene in air was carried out in a catalytic plasma reactor with an inner electrode made of sintered metal fibres(SMF)that also acted as catalyst.The parameters of the concentration,specific input energy,and gas residence time were optimized.The modification of the SMF inner electrode with transition metal oxides like MnOx and CoOx oxides promoted complete oxidation,especially at low input energy.CoOx/SMF showed higher activity than MnOx/SMF and SMF,and could oxidise completely 100 ppm of nitrobenzene at 300 J/L.     

PHOTOCONDUCTIVE PROPERTIES OF PVK:Alq3 BLEND FILMS STUDIED BY STEADY-STATE AND TIME-RESOLVED TRANSIENT PHOTOCURRENT SPECTRA

The carrier transport properties of the blends of the hole transport material poly(N-vinylcarbazole) (PVK) and the electron transport material tris (8-hydroxyquinolinolato) aluminumⅢ(Alq_3) are investigated at room temperature using steady-state and time-resolved transient photocurrent measurements as a function of doping concentration of Alq_3.Due to lower LUMO and higher HOMO energy level of Alq_3 than those of PVK,Alq_3 molecules may act as carrier trap states in PVK films at low concentration.However...