原子吸收法测定三七中的铜、镉和锂

干法灰化、硝酸浸取盐分 ,原子吸收法同时测定三七中的铜、镉、锂。优化了仪器工作条件 ,对盐酸、高氯酸、硫酸、共存元素干扰进行了试验。该法对铜、镉、锂的检出限分别为 0 .0 0 2 3μg/ m L、0 .0 0 2 6μg/ m L和0 .0 0 2 0 μg/ m L;测定精密度分别为 2 .5 0 %、10 .0 8%和 9.0 2 % ;回收率分别在 96 %— 10 3%、92 %— 10 8%和 96 %— 10 4 %之间。     

电感耦合等离子体-原子发射光谱法测定银中22种微量元素

应用电感耦合等离子体-原子发射光谱法测定银中铝、金、钡、铋、钙、钴、铬、铜、铁、锂、镁、锰、钼、镍、铅、钯、铂、锡、钛、钒、钇及锌22种微量杂质元素。试液浓度为10mg/mL时,测定范围为10—320μg/g,回收率在94.9%—107%之间,相对标准偏差在3.3%—8.7%之间(n=6)。     

苦瓜中维生素C含量的测定

建立苦瓜中维生素C含量直接测定新方法。以10%盐酸溶液为溶剂,采用紫外分光光度法测定含量。维生素C在0—10μg/mL浓度范围内与吸光度呈良好的线性关系,回归方程为：y=0.04746C＋0.00109,r=0.9997。检出限为0.023μg/mL,加标回收率在94.8%—101.1%之间。该法操作简单,干扰离子少,结果准确,测量快速、准确度和灵敏度高,可应用于维生素C含量的测定。     

微波消解ICP-AES测定中药朱砂莲中多种元素

采用微波消解 ICP- AES法同时测定了朱砂莲中 Ca、Cu、Fe、K、Mg、Mn、Na、P、Zn等 9种元素 ,加标回收率在 97.3%— 10 1.3%之间 ,相对标准偏差 RSD≤ 3.6 % ,检出限在 0 .2— 5 1.0μg/ L之间 ,方法快速简便 ,结果准确。比较了微波消解和干灰化法溶样的测定结果     

同一种前处理方法测定烟草中砷、铅和镉

采用同一种前处理方法即硝酸和高氯酸消解处理烟草样品后,氢化物发生-原子荧光光谱法测定烟叶中砷、铅;原子吸收光谱法测定烟叶中镉。样品溶液介质为10%的盐酸,对7个样品平行3次重复实验,其相对标准偏差为砷:0.81%—4.96%、铅:2.82%—5.83%、镉:0.96%—4.60%,砷、铅、镉的检测线性范围分别为:0.0—120.0、0.0—60.Oμg·L^-1和0.0—800.0μg·L^-1,加标回收率:砷在94.5%—96.9%之间、铅在92.7%—101.6%之间、镉在102.2%—110.9%之间。     

ICP-AES同时测定涂料中镉、铬、钴和铅

系统研究了样品灰化条件对涂料中重金属元素测定结果的影响 ,建立了 ICP- AES法同时测定涂料中镉、铬、钴、铅元素含量的方法 ,方法的线性范围为 5— 10 0 0μg/ g,检出限为 0 .1— 0 .99μg/ g,相对标准偏差为 1.5 %— 9.9% (n=7) ,加入回收率为 97.0 %— 10 1.0 %。     

分光光度法测定饲料用灌木中的淀粉含量

饲料用灌木中的淀粉用酶水解 ,水解产生的葡萄糖用蒽酮显色后分光光度法测定 ,由葡萄糖含量换算为淀粉含量。方法检出限为 2 μg/ m L,相对标准偏差为 1.4 %— 2 .2 % ,标准回收率在 97%— 10 3%之间。本方法用于几种灌木样品中淀粉含量的测定 ,结果令人满意。     

高效液相色谱内标法测定烟草料液中的几种非挥发性成分

以甘露醇为内标物 ,Waters Suger- Park- 1钙型阳离子交换柱为固定相 ,0 .0 5 g/L EDTA钙钠水溶液为流动相分离 ,示差折光仪为检测器 ,高效液相色谱法一次进样同时测定料液样品中的糖、甘油、丙二醇和木糖醇。方法 RSD在 0 .6 8%— 0 .76 %之间 ,标准回收率在 98%— 10 2 %之间 ,结果令人满意。     

ICP-AES测定铂金饰品抛光灰中铂、钯、金和银

提出一种 ICP- AES快速测定铂金饰品抛光灰中铂、钯、金、银的分析方法。 5 g样品经灰化处理后 ,王水提取 ,直接测定 ,该方法的检出限 Pt、Pd、Au、Ag分别为 4 6 .5、4 2 .3、10 .4和 5 .1ng·m L-1。回收率为94 .2 %— 10 3.5 %之间。相对标准偏差为 2 .8%— 4 .4 %。     

不同产地几种中药材中重金属含量测定及砷的形态分析

通过对不同产地几种中药材中砷、铅、镉、铜以及无机砷、三价砷含量的分析测定,得出样品中砷、铅、镉、铜以及无机砷、无机三价砷的测定RSD〈3%,加标回收率在91.32%—109.7%之间。11个样品的总砷含量在0.047—1.681μg/g之间,均低于2μg/g;无机砷含量为0.023—1.294μg/g;无机三价砷含量为0.019—0.918μg/g;铅含量两份样品未检出,其余样品为0.007—0.786μg/g,均低于5μg/g;镉的测定,两份样品未检出,其余样品含量为0.007—2.129μg/g,其中两份样品大于0.3μg/g;铜含量为4.441—14.07μg/g,均低于20μg/g。研究发现同种药材不同产地的重金属含量差异较大,部分产地金银花中镉含量超标严重,无机砷和三价砷含量相对较高,需引起重视。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Research on beamforming method for dual-line array with space mismatch between the two line arrays

The performance of port/starboard discrimination of dual-line array will be seriously degraded when the space between the two line arrays of the dual-line array is mismatched. The directivity function of the delay-sum and delay-subtract beamforming is deduced and the port/starboard discrimination of the delay-sum and delay-subtract beamforming is also studied both under the ideal status and the status under which the space between the two line arrays of the dual-line array is mismatched. Analysis results show the delay-subtract beamforming has better performance of port/starboard discrimination. At last, the sea trial results demonstrate the theoretical results.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Retrieval of ultraviolet skylight radiances and O3 slant column densities from balloon-borne limb spectrometer

With a novel light-weight and absolutely calibrated ultraviolet （UV） spectrometer, UV skylight radiances and O3 slant column densities are measured by balloon-borne limb measurements in Xinjiang area, China. UV skylight radiances measured at the height of 31 km are compared with the results from Modtran in the wavelength range from 290 to 420 nm. O3 slant column densities are derived from radiance spectra in the Huggins bands （320 - 335 nm） using differential optical absorption spectroscopy method. And the parameter exhibits a good correlation with the same value simulated by radiative transfer model （Tracy）. The O3 profile simultaneously measured by an O3 sonde is used as input in Tracy calculations. The O3 sonde is launched on the same balloon.     

Design optimization of highly sensitive LSPR enhanced surface plasmon resonance biosensors with nanoholes

For breaking through the sensitivity limitation of conventional surface plasmon resonance (SPR) biosensors, novel highly sensitive SPR biosensors with Au nanoparticles and nanogratings enhancement have been proposed recently.But in practice, these structures have obvious disadvantages.In this study, a nanohole based sensitivity enhancement SPR biosensor is proposed and the influence of different structural parameters on the performance is investigated by using rigorous coupled wave analysis (RCWA).Electromagnetic field distributions around the nanohole are also given out to directly explain the performance difference for various structural parameters.The results indicate that significant sensitivity increase is associated with localized surface plasmons (LSPs) excitation mediated by nanoholes.Except to outcome the weakness of other LSP based biosensors, larger resonance angle shift, reflectance amplitude, and sharper SPR curves' width are obtained simultaneously under optimized structural parameters.     

Polymer gratings based on photopolymerization for low-order distributed feedback polymer lasers

Novel polymer distributed feedback(DFB)gratings are fabricated based on photopolymerization to reduce lasing threshold of polymer lasers.A photopolymer formulation sensitive to 355-nm ultraviolet(UV)light is proposed for the fabrication of polymer gratings and it can be used to form polymer films by spin-coating process.A very low surface-relief depth ranging from 12.5 to about 1.0 nm has been demonstrated with a refractive-index modulation of about 0.012.The experimental results indicate that such polymer gratings have promising potentials for the fabrication of low-order DFB organic semiconductor lasers.