Hematite nanoparticle monolayers on mica electrokinetic characteristics

Electrokinetic properties of α-Fe(2)O(3) (hematite) nanoparticle monolayers on mica were thoroughly characterized using the streaming potential method. Hematite suspensions were obtained by acidic hydrolysis of ferric chloride. The average size of particles (hydrodynamic diameter), determined by dynamic light scattering (DLS) and AFM, was 22nm (pH=5.5, I=10(-2)M). The hematite monolayers on mica were produced under diffusion-controlled transport from the suspensions of various bulk concentration. The monolayer coverage, quantitatively determined by AFM and SEM, was regulated within broad limits by adjusting the nanoparticle deposition time. This allowed one to uniquely express zeta potential of hematite monolayers, determined by the streaming potential measurements, in terms of the particle coverage. Such dependencies, obtained for various pH, were successfully interpreted in terms of the three-dimensional electrokinetic model. A universal calibrating graph was produced enabling one to determine hematite monolayer coverage from the measured value of the streaming potential. The influence of the ionic strength, varied between 10(-4) and 10(-2)M, on the zeta potential of hematite monolayers was also studied. Additionally, the stability of monolayers (desorption kinetics) was determined under in situ conditions using the streaming potential method. Our experimental data prove that it is feasible to produce uniform and stable hematite particle monolayers of well-controlled coverage. Such monolayers may find practical applications as universal substrates for protein immobilization (biosensors) and in electrocatalytic applications.     

Comparison of Si-O-C interfacial bonding of alcohols and aldehydes on Si(111) formed from dilute solution with ultraviolet irradiation

Aliphatic alcohols and aldehydes were reacted with the Si(111)-H surface to form Si-O-C interfacial bonds from dilute solution by using ultraviolet light. The resulting monolayers were characterized by using transmission infrared spectroscopy, spectroscopic ellipsometry, and contact angle measurements. The effect of different solvents on monolayer quality is presented. The best monolayers were formed from CH(2)Cl(2). The optimized monolayers were thoroughly characterized to determine the film structure and monolayer stability. The UV-promoted, alcohol-functionalized, and aldehyde-functionalized monolayers are of comparable quality to those previously prepared by other means. Although both molecules are tethered through a Si-O-C bond, the film reactivity is distinctly different with the aldehyde films being more chemically resistant. The differences in chemical reactivity, vibrational spectra, hydrophobicity, and ellipsometric thickness between the alcohol and aldehyde monolayers are attributed to a difference in molecular coverage and monolayer formation.     

Cross metathesis on olefin-terminated monolayers on Si(111) using the Grubbs' catalyst

This paper reports the functionalization and patterning of olefin-terminated monolayers on Si(111) through cross metathesis. A simple, one-step synthesis of a diolefin--CH2=CH(CH2)9O(CH2)9CH=CH2--was developed from commercially available starting materials. Mixed partially olefin-terminated monolayers of this novel diolefin and 1-octadecene on hydrogen-terminated Si(111) were obtained. The olefins are raised above the rest of the monolayer and thus sterically accessible for further functionalization. Olefin-terminated monolayers were reacted with the Grubbs' first generation catalyst and olefins in solution that were terminated with fluorines, carboxylic acids, alcohols, aldehydes, and alkyl bromides. Characterization of these monolayers using X-ray photoelectron spectroscopy and horizontal attenuated total reflection infrared spectroscopy demonstrated that olefins on the surface had reacted via cross metathesis to expose fluorines, carboxylic acids, aldehydes, alcohols, and bromides. Through calibration experiments, we demonstrated a simple 1:1 correspondence between the ratio of olefins in solution used in the assembly and the final composition of the mixed monolayers. Finally, these monolayers on silicon were patterned on the micrometer-size scale by soft lithography using microfluidic channels patterned into poly(dimethylsiloxane) (PDMS) stamps. Micrometer-wide lines of polymer brushes were synthesized on these monolayers and characterized by scanning electron microscopy. In addition, olefin-terminated monolayers were patterned into micrometer-sized lines exposing carboxylic acids by cross metathesis with olefins in solution. This method of patterning is broadly applicable and can find applications in a variety of fields including the development of biosensors and nanoelectronics.     

Simple methods for the direct assembly, functionalization, and patterning of acid-terminated monolayers on Si111

This article describes mild methods to directly assemble, functionalize, and pattern monolayers of undecylenic acid on hydrogen-terminated Si(111). These monolayers were assembled under very mild conditions from a neat solution of undecylenic acid containing 0.1 mol % 4-(decanoate)-2,2,6,6-tetramethylpiperidinooxy at room temperature without the need for UV light. Because of these mild conditions, monolayers exposing carboxylic acids could be assembled in one step without the need to protect the acid prior to its assembly. The monolayers were extensively characterized by horizontal attenuated total reflection infrared spectroscopy, X-ray photoelectron spectroscopy (XPS), and contact angle goniometry. The monolayers bonded to the silicon surface preferentially through the olefin with no detectable bonds between the carboxylic acids and silicon. The crystallinity of the monolayer was studied by infrared spectroscopy through the antisymmetric--v(a)(CH(2))--and symmetric--v(s)(CH(2))--stretches for methylene. Because it is important for future applications to assemble functional surfaces, methods to react the acid-terminated monolayers with trifluoroacetic anhydride and triethylamine to yield a symmetric anhydride on the monolayer were studied. These anhydrides were reacted with a variety of milligram-quantity amines to yield amide-terminated surfaces. This method was general, and a variety of amines could be bonded to the monolayer. The stabilities of these monolayers upon exposure to ambient conditions and under a variety of solvents were described. Because patterned monolayers have found wide applications, we have developed methods to pattern 1-octadecylamine and poly(ethylenimine) on the micrometer scale using soft lithography. In addition, polymer brushes of polynorbornene with thicknesses from 32 to 150 nm were grown from monolayers patterned with the Grubbs' catalyst. The patterned surfaces were imaged by scanning electron microscopy, scanning probe microscopy, and ellipsometry to determine the thicknesses of the patterns and the fidelity of the method.     

Study of alkyl organic monolayers with different molecular chain lengths directly attached to silicon

Alkyl organic monolayers with different alkyl molecular chain lengths directly attached to silicon were prepared at 160 degrees C from 1-decene (C10), 1-dodecene (C12), 1-tetradecene (C14), 1-hexadecene (C16), and 1-octadecene (C18). These monolayers were characterized on the basis of water contact angle measurement, ellipsometry, X-ray reflectivity (XR), X-ray photoelectron spectroscopy (XPS), and grazing incidence X-ray diffraction (GIXD) to elucidate the effect of the molecular chain length on the molecular arrangement and packing density of the monolayers. Water contact angle and XPS measurements showed that C12, C14, and C16 monolayers have a comparably higher quality, while the quality of C10 and C18 monolayers is worse. GIXD revealed that the alkyl monolayers directly attached to the Si were all amorphously structured regardless of their alkyl chain length. The amorphous structure of the alkyl monolayers could be attributed to the rigid Si-C bonding, low quality of hydrogen-terminated silicon substrate, and/or low mobility of physisorbed molecules.     

光响应性树枝状偶氮苯单分子层

偶氮苯树枝状分子通过中心羧基与金或者石英基体表面的氨基进行酰胺化反应得到树枝状分子单分子层修饰的表面,利用红外反射 吸收光谱（IRRAS）、UV-Vis和Raman光谱法研究了单分子层的结构和性能,利用椭偏谱法来测量四代树枝状（G-4）单分子层在不同异构化形态的分子层厚度,其中反式构象的单分子层厚度为（2.38±0.09） nm,顺式构象厚度为（1.88±0.08） nm。 利用表面等离子体共振（SPR）研究不同形态下G-4单层与不同等电点的蛋白质之间的相互作用关系,结果表明,G-4单层为负电位表面,能够吸附正电位的蛋白质,而且当树枝状单分子层形态从反式变为顺式时,表面电位变为更负,能吸附更多正电位的蛋白质。     

Surface plasmon resonance study on the interaction between the fructose and phenylboronic acid monolayer

Phenylboronic acid derivatives were synthesized and their self-assembled monolayers (SAMs) were formed on a gold surface. The interaction between fructose and phenylboronic acid monolayers was evaluated using surface plasmon resonance (SPR). These phenylboronic acid monolayers showed good sensitivity to fructose at a low concentration range and the resonance angle shifts increased in accordance with the alkyl chain length.     

菁染料单分子膜覆盖的铂电极的电化学特性

L-B膜作为一种单分子膜技术已经得到了广泛的应用。最近很多人用电化学方法研究覆盖有L-B膜电极的特性^[1,2]。许多工作^[3-5]证明了脂肪酸L-B膜具有很强的抑制离子透过和抑制电子隧道电流的能力。     

Characterization of self-assembled monolayers from lithium dialkyldithiocarbamate salts

We report the formation of self-assembled monolayers (SAMs) onto gold substrates by exposure to lithium dialkyldithiocarbamate salts [(Li+(R2DTC-), where R = n-propyl, n-butyl, n-octyl, n-decyl, n-dodecyl, or n-octadecyl] in ethanol or methylene chloride. The crystallinity and composition of the monolayers were assessed by polarized modulation infrared reflection absorption spectroscopy (PM-IRRAS), wettability was characterized by contact angles of water and hexadecane, thickness was measured by spectroscopic ellipsometry, and barrier properties determined by electrochemical impedance spectroscopy. While the shorter R2DTC-s formed monolayers with liquid-like packing, monolayers prepared from the longest R2DTC- (where R = n-octadecyl) exhibit similar thickness, crystallinity, wettability, and capacitance as monolayers prepared from n-octadecanethiol. The hydrocarbon chains within the monolayers prepared from (C18)2DTC- are less canted on average than those prepared from n-octadecanethiol. Nonetheless, the (C18)2DTC- SAM exhibits an order of magnitude lower resistance against the penetration of redox probes, which is attributed to a higher density of pinhole defect sites.     

Nanoscale patterning of alkyl monolayers on silicon using the atomic force microscope

Self-assembled monolayers (SAMs) of 1-alkenes on hydrogen-passivated silicon substrates were successfully patterned on the nanometer scale using an atomic force microscope (AFM) probe tip. Nanoshaving experiments on alkyl monolayers formed on H-Si(111) not only demonstrate the flexibility of this technique but also show that patterning with an AFM probe is a viable method for creating well-defined, nanoscale features in a monolayer matrix in a reproducible and controlled manner. Features of varying depths (2-15 nm) were created in the alkyl monolayers by controlling the applied load and the number of etching scans made at high applied loads. The patterning on these SAM films is compared with the patterning of alkyl siloxane monolayers on silicon and mica.     

金纳米粒子组装体系中偶联单分子层膜结构的SERS光谱表征与分析

通过分子自组装方法制备4,4′-二硫联吡啶(PySSPy)单分子膜修饰的金电极. 利用所形成的对巯基吡啶自组装单分子膜(SAMs)作为偶联层进行金纳米粒子有序膜的组装. 对该纳米粒子组装体系进行Raman光谱测定, 得到了具有良好信噪比的对巯基吡啶单分子膜的表面增强拉曼散射(SERS)光谱. 在此基础上, 进一步采用电化学现场SERS光谱技术研究了该纳米粒子组装体系的SERS光谱随电位变化的规律. 在该体系稳定的电位范围内表征对巯基吡啶单分子膜的特征谱峰1011与1093 cm^-1、1575与1610 cm^-1以及1206与1215 cm^-1这三对谱峰其强度随着所施加电位的改变呈现出明显的规律性. 分析表明, 偶联单分子层中吡啶环芳香性随着所施加电位的改变而有规律地变化是SERS光谱特征改变的内在原因.     

Structural characterization of organic multilayers on silicon(111) formed by immobilization of molecular films on functionalized Si-C linked monolayers

Silicon(111)-H surfaces were derivatized with omega-functionalized alkenes in UV-mediated and thermal hydrosilylation reactions to give Si-C linked monolayers. Additional molecular layers of organic compounds were coupled either directly or via linker molecules to the functionalized alkyl monolayers. In the first instance, amino-terminated monolayers were prepared from a tert-butoxycarbonyl-protected omega-aminoalkene followed by removal of the protecting group. Various thiols were coupled to the monolayer using a heterobifunctional linker, which introduced maleimide groups onto the surface. In the second system, N-hydroxysuccinimide (NHS) ester-terminated monolayers were formed by reaction of Si-H with N-succinimidyl undecenoate. The reactivity of the NHS ester groups was confirmed by further modification of the monolayer. The stepwise assembly of these multilayer structures was characterized by X-ray reflectometry and X-ray photoelectron spectroscopy.     

Thickness and refractive index of DPPC and DPPE monolayers by multiple-beam interferometry

The thickness and refractive index of 1,2-dipalmitoyl-sn-glycero-3-phosphatidyl choline (DPPC) and 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine (DPPE) monolayers Langmuir--Blodgett (LB) deposited on mica were measured in dry air and bulk water using multiple-beam interferometry (MBI). Measurements of thickness using atomic force microscopy (AFM) of identical monolayers, and X-ray reflectivity (XRR) of the monolayers on quartz were taken for comparison. The measurement of the properties of solid-supported monolayers in dry air allows lipid optical properties to be determined free from solvent effects. The thickness and refractive index measured by MBI were 25.5?±?0.6 Å and 1.485?±?0.007 for DPPE monolayers, and 23.9?±?0.5 Å and 1.478?±?0.006 for DPPC monolayers in dry air. These thicknesses are consistent with the other techniques used in this work as well as other measurements in the literature. The refractive indices of solid-supported lipid monolayers have not been previously measured. The values are higher than previous measurements on black lipid films done by reflectometry, which is attributed to increased lipid packing density and the absence of hydrocarbon solvents. Applying water to the monolayers had no measurable effect on their properties, indicating that any change in hydration was below detection.

Miscibility of binary monolayers at the air-water interface and interaction of protein with immobilized monolayers by surface plasmon resonance technique

The miscibility and stability of the binary monolayers of zwitterionic dipalmitoylphosphatidylcholine (DPPC) and cationic dioctadecyldimethylammonium bromide (DOMA) at the air-water interface and the interaction of ferritin with the immobilized monolayers have been studied in detail using surface pressure-area isotherms and surface plasmon resonance technique, respectively. The surface pressure-area isotherms indicated that the binary monolayers of DPPC and DOMA at the air-water interface were miscible and more stable than the monolayers of the two individual components. The surface plasmon resonance studies indicated that ferritin binding to the immobilized monolayers was primarily driven by the electrostatic interaction and that the amount of adsorbed protein at saturation was closely related not only to the number of positive charges in the monolayers but also to the pattern of positive charges at a given mole fraction of DOMA. The protein adsorption kinetics was determined by the properties of the monolayers (i.e., the protein-monolayer interaction) and the structure of preadsorbed protein molecules (i.e., the protein-protein interaction).     

Structural and electron-transfer characteristics of carbon-tethered porphyrin monolayers on Si(100)

Structural and electron-transfer characteristics are reported for two classes of zinc porphyrin monolayers attached to Si(100) surfaces via Si-C bonds. One class, designated ZnP(CH(2))(n)- (n = 2-4), contains an alkyl linker appended to the meso-position of the porphyrin, with the nonlinking substituents being p-tolyl groups. The other, designated ZnPPh(CH(2))(n)- (n = 0-3), contains a phenyl or phenylalkyl linker appended to the meso-position of the porphyrin, with the nonlinking substituents being mesityl groups. Both classes of zinc porphyrin monolayers on Si(100) were examined using Fourier transform infrared spectroscopy and various electrochemical methods. The studies reveal the following: (1) The structural and electron-transfer characteristics of the ZnP(CH(2))(n)- and ZnPPh(CH(2))(n)- monolayers are generally similar to those of monolayers formed from porphyrins with analogous linkers, but anchored with an O, a S, or a Se atom. (2) The ZnP(CH(2))(n)-, ZnPPh-, and ZnPPhCH(2)- monolayers exhibit lower saturation coverages and have their porphyrin ring more tilted with respect to the surface normal than the ZnPPh(CH(2))(2)- and ZnPPh(CH(2))(3)- monolayers. (3) The electron-transfer rates for both the ZnP(CH(2))(n)- and ZnPPh(CH(2))(n)- classes of monolayers monotonically decrease as the length of the linker increases. (4) For all the ZnP(CH(2))(n)- and ZnPPh(CH(2))(n)- monolayers, both electron-transfer rates and charge-dissipation rates decrease monotonically as the surface coverage increases. Collectively, the studies reported herein provide a detailed picture of how the linker type influences the structural and electron-transfer characteristics of these general classes of monolayers.     

Effects of bridge ions, DNA species, and developing temperature on flat-lying DNA monolayers

Recently, we have successfully constructed flat-lying DNA monolayers on a mica surface (J. Phys. Chem. B 2006, 110, 10792-10798). In this work, the effects of various factors including bridge ions, DNA species, and developing temperature on the configuration of DNA monolayers have been investigated by atomic force microscopy (AFM) in detail. AFM results show that the species of bridge ions and developing temperature play a crucial role during the formation process. For example, the divalent cation Zn2+ resulted in many DNA chains stuck side by side in the monolayers due to the strong interactions between it and DNA's bases or the mica surface. Most DNA chain's conglutinations disappeared when the developing temperature was higher than 40 degrees C. Cd2+ and Ca2+ produced more compact DNA monolayers with some obvious aggregations, especially for the DNA monolayers constructed by using Ca2+ as the bridge ion. Co2+ produced well-ordered, flat-lying DNA monolayers similar to that of Mg2+. Furthermore, it was found that the flat-lying DNA monolayers could still form on a mica surface when plasmid DNA pBR 322 and linear DNA pBR 322/Pst I were used as the DNA source. Whereas, it was hard to form DNA monolayers on a (3-aminopropyl)triethoxysilane-mica surface because the strong interactions between DNA and substrate prevented the lateral movement of DNA molecules. These results suggested that the appropriate interactions between divalent cations and DNA or mica surface were important for the formation of flat-lying DNA monolayers. The obtained information is a necessary supplement to our previous studies on the formation kinetics of such monolayers and may be useful for practical application of the monolayers and further theoretical studies.     

Polymer ultrathin films with immobilized photosynthetic reaction center proteins

Properties of mixed monolayers of lipid-photosynthetic reaction center proteins (RC) were studied and the optimum conditions for stable films fabrication were determined. The following synthetic: N-acryloylphosphatidylethanolamine (ACPE), tetracosa-11, 13-diinoic acid (TDA), pentacosa-10, 12-diinoic acid (PDA), dioctadecyldienoylphosphatidylcholine (DODL) and natural lipids: L-α-phosphatidylethanolamine (PE), L-α-phosphatidylcholine (PC) were used. The rate of polymerization of the mixed ACPE-RC and TDA-RC monolayers is lower in comparison with corresponding values for pure lipid-like monomers on air/water interface. The optical and photoelectrical measurements provide evidence for an orientation of RCs on interface. Hydrophilic H-subunit in monomeric and polymeric ACPE-RCs, and monomeric DODL-RCs monolayers is preferentially oriented towards water as in the pure RC monolayers. Opposite orientation was found with TDA-RCs and PDA-RCs films. No preferential orientation for lipid-RCs from C. aurantiacus monolayers was found because of the RCs having low assymmetry of hydrophobic subunits (M and L).     

Elastic bounded diffusion and electron propagation: dynamics of the wiring of a self-assembly of immunoglobulins bearing terminally attached ferrocene poly(ethylene glycol) chains according to a spatially controlled organization.

Molecular monolayers of immunoglobulins bearing terminally attached ferrocene poly(ethylene glycol) chains (IgG-PEG-Fc) were self-assembled at an electrode surface in a step-by-step manner involving antigen-antibody recognition reactions. The total number N of assembled IgG-PEG-Fc monolayers and the number of spacers n(i) separating two successive IgG-PEG-Fc monolayers were controlled and varied. Electron transport through the protein assembly involves the dynamics of the terminally attached PEG chains and isotopic electron exchange between ferrocene heads belonging to successive IgG-PEG-Fc monolayers. The model of elastic bounded diffusion enabled us to analyze quantitatively the dependence of the rate of electron transport on N, n(i), and the rate constant (k(e)) of isotopic electron exchange. Wiring of a molecular monolayer of redox enzyme is also quantitatively characterized.     

Molecular dynamics and phase transitions in phospholipid monolayers at liquid-liquid interfaces

Stablen-hexadecane/water andn-tetradecane/water macroemulsions containing monolayers of natural (egg yolk lecithin, EY) and synthetic (dimyristoylphosphatidylcholine, DMPC) phospholipids at liquid-liquid interfaces were prepared. The existence of the monolayers was proved by studying the reduction kinetics of a surface-active spin probe with ascorbate anions. Spin labeled derivatives of stearic acid in which the nitroxide group is locared at different distances from the polar head (5-, 12-, and 16-doxylstearic acids) were used to study the temperature dependences of the molecular ordering, rotational mobility, and local polarity in the monolayers in emulsions and also in bilayers in liposomes obtained from the same lipids. In the EY monolayers, the degree of spin probe solubilization is higher, while the order parameters (S) and rotational correlation times (τ) are lower than those in EY bilayers. The differences between these parameters for mono- and bilayers increase with an increase in the distance of the reporter group from the aqueous phase. In the DMPC monolayers, a first-order phase transition was detected by measuring the temperature dependences ofS and τ. The temperature region of the phase transition in monolayers is shifted to lower temperatures with respect to that for bilayers and depends on the nature of the oil phase. It was concluded that the phospholipid monolayers in emulsions incorporate hydrocarbon molecules, whose concentration in the DMPC monolayers increases on going from the low-temperature (gel) to the high-temperature (liquid crystal) phase. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 418–425, March, 1998.     

Hydrolytic stability of organic monolayers supported on TiO2 and ZrO2

The hydrolytic stability of C18 monolayers supported on TiO2 and ZrO2 was studied. Three types of monolayers were prepared from the following octadecyl modifiers: (1) octadecyldimethylchlorosilane (C18H37Si(CH3)2Cl); (2) octadecylsilane (C18H37SiH3); and (3) octadecylphosphonic acid (C18H37P(O)(OH)2). The hydrolysis of the surfaces prepared was studied under static conditions at 25 and 65 degrees C at pH 1-10. On the basis of the loss of grafted material, the stability of the monolayers fall in the following range: C18H37P(O)(OH)2 > or = C18H37SiH3 > C18H37Si(CH3)2Cl. At 25 degrees C, monolayers from C18H37P(O)(OH)2 showed only approximately 2-5% loss in grafting density after one week at pH 1-10. The high stability of these monolayers was explained because of the strong interactions of the phosphonic acids with the substrates. Monolayers from C18H37Si(CH3)2Cl showed poor hydrolytic stability at any pH, which was explained because of the low stability of Ti-O-Si and Zr-O-Si bonds. Unlike monofunctional silanes, trifunctional silane (C18H37SiH3) yielded surfaces that showed good hydrolytic stability. This suggests that the stability of the monolayers from trifunctional silanes is primarily due to "horizontal" bonding (Si-O-Si or Si-OH...HO-Si) rather than due to bondingwith the matrix (M-O-Si). At 65 degrees C, all C18 surfaces become more susceptible to hydrolysis; however, the trend observed for 25 degrees C remained unchanged. Low-temperature nitrogen adsorption was used to study the adsorption properties of the monolayers as a function of their grafting density. The energy of adsorption interactions showed a significant increase as the grafting density of the monolayers decreased. The order of the alkyl groups in the monolayers, as assessed from CH2 stretching, decreased as the grafting density of the monolayers decreased.