Hydrophobic charge‐induction resin with 5‐aminobenzimidazol as the functional ligand: preparation,protein adsorption and immunoglobulin G purification

A new hydrophobic charge‐induction chromatography resin was prepared with 5‐aminobenzimidazol as functional ligand and polyacrylic ester beads as matrix. Adsorption isotherms and adsorption in columns were investigated using human immunoglobulin G and bovine serum albumin as model proteins, and the influence of pH and NaCl concentration was discussed. Results showed that the ligand density was 195 μmol/mL gel, and protein selectivity can be improved by controlling pH and salt addition. An optimized purification process (sample loading at pH 8.0 with 0.2 M NaCl and elution at pH 5.0) was performed to purify human immunoglobulin G from bovine serum albumin containing feedstock, which resulted in human immunoglobulin G purity of 99.7% and recovery of 94.6%. A similar process was applied for the purification of monoclonal antibody from cell culture supernatant, which showed antibody purity of 94.9% and recovery of 92.5%. The results indicated that the new resin developed had comparable performance as Protein A chromatography and would be suitable for antibody purification from complex feedstock.     

Purification of transferrin by magnetic immunoaffinity beads

Immunoaffinity adsorbent for transferrin (Tf) purification was prepared by immobilizing anti‐transferrin (Anti‐Tf) antibody on magnetic monosizepoly(glycidyl methacrylate) beads, which were synthesized by dispersion polymerization technique in the presence of Fe₃O₄nanopowder and obtained with an average size of 2.0 μm. The magnetic poly(glycidyl methacrylate) (mPGMA) beads were characterized by Fourier transform infrared spectroscopy, swelling tests, scanning electron microscopy, electron spin resonance spectroscopy, thermogravimetric analysis and zeta sizing analysis. The density and swelling ratio of the beads were 1.08 g/cm³ and 52%, respectively. Anti‐Tf molecules were covalently coupled through epoxy groups of mPGMA. Optimum binding of anti‐Tf was 2.0 mg/g. Optimum Tf binding from aqueous Tf solutions was determined as 1.65 mg/g at pH 6.0 and initial Tf concentration of 1.0 mg/mL. There was no remarkable loss in the Tf adsorption capacity of immunoaffinity beads after five adsorption–desorption cycles. Tf adsorption from artificial plasma was also investigated and the purity of the Tf molecules was shown with gel electrophoresis studies.     

基于超大孔聚合物微球的混合色谱模式层析介质的制备

以甲基丙烯酸缩水甘油酯与乙二醇二甲基丙烯酸酯共聚的超大孔聚合物微球为基质,采用聚乙烯亚胺和丁基缩水甘油醚先后衍生微球的表面,制备成兼具阴离子交换与疏水相互作用的混合色谱模式层析介质。考察离子交换基团、疏水配基密度对蛋白载量、回收率的影响,结果表明,在离子交换容量0.2~0.5 mol/mL范围内,随着介质离子交换容量的增大,蛋白载量及回收率均呈增加趋势,蛋白载量最高值达40 mg/mL,回收率大于90%。当疏水配基的密度大于0.03 mol/mL时,介质开始表现疏水相互作用。此超大孔混合模式色谱介质在大于2000 cm/h 的流速下依然能保持低于2 MPa 的柱背压,同时在高流速下(2880 cm/h)纯化人血清中的抗体应用中表现良好的分辨率。此介质在高通量分离纯化应用方面具有巨大潜力。     

Oriented immobilized anti‐hIgG via Fc fragment‐imprinted PHEMA cryogel for IgG purification

Antibodies are used in many applications, especially as diagnostic and therapeutic agents. Among the various techniques used for the purification of antibodies, immunoaffinity chromatography is by far the most common. For this purpose, oriented immobilization of antibodies is an important step for the efficiency of purification step. In this study, F_c fragment‐imprinted poly(hydroxyethyl methacrylate) cryogel (MIP) was prepared for the oriented immobilization of anti‐hIgG for IgG purification from human plasma. Non‐imprinted poly(hydroxyethyl methacrylate) cryogel (NIP) was also prepared for random immobilization of anti‐hIgG to compare the adsorption capacities of oriented (MIP/anti‐hIgG) and random (NIP/anti‐hIgG) cryogel columns. The amount of immobilized anti‐hIgG was 19.8 mg/g for the NIP column and 23.7 mg/g for the MIP column. Although the amount of immobilized anti‐hIgG was almost the same for the NIP and MIP columns, IgG adsorption capacity was found to be three times higher than the NIP/anti‐hIgG column (29.7 mg/g) for the MIP/anti‐hIgG column (86.9 mg/g). Higher IgG adsorption capacity was observed from human plasma (up to 106.4 mg/g) with the MIP/anti‐hIgG cryogel column. Adsorbed IgG was eluted using 1.0 m NaCl with a purity of 96.7%. The results obtained here are very encouraging and showed the usability of MIP/anti‐hIgG cryogel prepared via imprinting of Fc fragments as an alternative to conventional immunoaffinity techniques for IgG purification. Copyright © 2012 John Wiley & Sons, Ltd.     

Improved purification of immunoglobulin G from plasma by mixed‐mode chromatography

Efficient loading of immunoglobulin G in mixed‐mode chromatography is often a serious bottleneck in the chromatographic purification of immunoglobulin G. In this work, a mixed‐mode ligand, 4‐(1H‐imidazol‐1‐yl) aniline, was coupled to Sepharose Fast Flow to fabricate AN SepFF adsorbents with ligand densities of 15–64 mmol/L, and the chromatographic performances of these adsorbents were thoroughly investigated to identify a feasible approach to improve immunoglobulin G purification. The results indicate that a critical ligand density exists for immunoglobulin G on the AN SepFF adsorbents. Above the critical ligand density, the adsorbents showed superior selectivity to immunoglobulin G at high salt concentrations, and also exhibited much higher dynamic binding capacities. For immunoglobulin G purification, both the yield and binding capacity increased with adsorbent ligand density along with a decrease in purity. It is difficult to improve the binding capacity, purity, and yield of immunoglobulin G simultaneously in AN SepFF chromatography. By using tandem AN SepFF chromatography, a threefold increase in binding capacity as well as high purity and yield of immunoglobulin G were achieved. Therefore, the tandem chromatography demonstrates that AN SepFF adsorbent is a practical and feasible alternative to MEP HyperCel adsorbents for immunoglobulin G purification.     

“Smart” molecularly imprinted monoliths for the selective capture and easy release of proteins

A new thermally switchable molecularly imprinted monolith for the selective capture and release of proteins has been designed. First, a generic poly(glycidyl methacrylate‐co‐ethylene dimethacrylate) monolith reacted with ethylenediamine followed by functionalization with 2‐bromoisobutyryl bromide to introduce the initiator for atom transfer radical polymerization. Subsequently, a protein‐imprinted poly(N‐isopropylacrylamide) layer was grafted onto the surface of the monolithic matrix by atom transfer radical polymerization. Scanning electron microscopy and energy‐dispersive X‐ray spectroscopy of the cross‐sections of imprinted monoliths confirmed the formation of dense poly(N‐isopropylacrylamide) brushes on the pore surface. The imprinted monolith exhibited high specificity and selectivity toward its template protein myoglobin over competing proteins and a remarkably large maximum adsorption capacity of 1641 mg/g. Moreover, this “smart” imprinted monolith featured thermally responsive characteristics that enabled selective capture and easy release of proteins triggered only by change in temperature with water as the mobile phase and avoided use of stronger organic solvents or change in ionic strength and pH.     

Loading characteristics and chemical stability of headgroup‐functionalized poly(ethylene glycol)‐lipid ligand tethers on polypropylene capillary‐channeled polymer fibers

Polypropylene capillary‐channeled polymer fibers have been modified by adsorption of headgroup‐functionalized poly(ethylene glycol)‐lipids to generate a species‐specific stationary phase. In order to study ligand binding characteristics, a fluorescein‐labeled poly(ethylene glycol)‐lipid was used as a model system. Breakthrough curves and frontal analysis were employed to characterize the surface loading characteristics across a range of lipid concentrations and mobile phase flow rates. Efficient mass transfer and fluid transport yield a linear adsorption isotherm up to the maximum loading concentration of 3 mg/mL, at a linear velocity of 57.1 mm/s. Under these conditions, the dynamic binding capacity was found to be 1.52 mg/g of fiber support. Variation of the linear velocity from 8.6 to 57.1 mm/s showed only small changes in breakthrough volume. The maximum capacity of 1.8 mg/g is found under conditions of a load velocity of 34.2 mm/s and a concentration of 3 mg/mL lipid. Exposure of the lipid modified fibers to several challenge solvents reveals a chemically robust system, with only 50% acetonitrile and hexanes able to disrupt the lipid adsorption. The straightforward capillary‐channeled polymer fiber surface modification with headgroup‐functionalized lipids provides both a diverse yet practically robust ligand tethering system.     

Enhanced binding by dextran‐grafting to Protein A affinity chromatographic media

Dextran‐grafted Protein A affinity chromatographic medium was prepared by grafting dextran to agarose‐based matrix, followed by epoxy‐activation and Protein A coupling site‐directed to sulfhydryl groups of cysteine molecules. An enhancement of both the binding performance and the stability was achieved for this dextran‐grafted Protein A chromatographic medium. Its dynamic binding capacity was 61 mg immunoglobulin G/mL suction‐dried gel, increased by 24% compared with that of the non‐grafted medium. The binding capacity of dextran‐grafted medium decreased about 7% after 40 cleaning‐in‐place cycles, much lower than that of the non‐grafted medium as decreased about 15%. Confocal laser scanning microscopy results showed that immunoglobulin G was bound to both the outside and the inside of dextran‐grafted medium faster than that of non‐grafted one. Atomic force microscopy showed that this dextran‐grafted Protein A medium had much rougher surface with a vertical coordinate range of ±80 nm, while that of non‐grafted one was ±10 nm. Grafted dextran provided a more stereo surface morphology and immunoglobulin G molecules were more easily to be bound. This high‐performance dextran‐grafted Protein A affinity chromatographic medium has promising applications in large‐scale antibody purification.     

高亲水性强阳离子交换色谱填料的制备及其在蛋白质分析中的应用

以具有双孔结构的聚甲基丙烯酸环氧丙酯(PGMA)微球为基质,以葡萄糖进行表面亲水改性,制备了强阳离子交换色谱填料,并将其用于复杂生命体系中生物大分子的快速而高效的分离、分析与纯化。葡萄糖亲水改性增进了填料的生物相容性,提高了蛋白质样品的回收率;双孔结构及较高的比表面积赋予填料良好的柱渗透性和样品负载量。以标准蛋白质为样品,考察了该填料对生物样品的分离性能。以100 mm×4.6 mm的色谱柱分离4种蛋白质,在6 min内实现了基线分离;以溶菌酶为样品,填料的吸附容量为39.5 g/L,在蛋白质快速分离纯化分析中显示了良好的应用前景。     

Monodisperse restricted access material with molecularly imprinted surface for selective solid‐phase extraction of 17β‐estradiol from milk

In this study, novel monodisperse restricted access media‐molecularly imprinted polymers were successfully prepared by surface initiated reversible addition‐fragmentation chain transfer polymerization using monodisperse crosslinked poly (glycidyl methacrylate‐co‐ethylene glycol dimethacrylate) microspheres as the carrier and acryloyl chloride‐modified β‐cyclodextrin as the hydrophilic functional monomer. The surface morphology, protein exclusion, and adsorption properties of the molecularly imprinted polymers were investigated. The results show that the material has excellent monodispersity and hydrophilicity, and simultaneously exhibit high adsorption capacity, fast binding kinetics, high selectivity, and significant thermal stability. The molecularly imprinted polymers as dispersive solid‐phase extraction adsorbent combined with reversed‐phase high‐performance liquid chromatography was used to selectively enrich, separate, and analyze trace 17β‐estradiol in milk samples. The recovery of 17β‐estradiol is 88–95% with relative standard deviation of <4%, and the limits of detection and quantification of this method are 2.08 and 9.29 µg/L, respectively. The novel restricted access media‐molecularly imprinted polymer adsorbents provide an effective method for the selective extraction and detection of 17β‐estradiol directly from complex samples.     

Thermoresponsive hydrophobic copolymer grafted on agar microspheres for all‐aqueous bioseparations

Agar microspheres were prepared by water–oil emulsification and cross‐linked under alkaline condition. The thermoresponsive hydrophobic copolymer, poly(N‐isopropylacrylamide‐co‐lauryl methacrylate‐co‐acrylamide), was grafted on the agar microspheres via atom transfer radical polymerization. The agar microspheres grafted with copolymers were characterized by light microphotography, elemental analysis, Fourier transform infrared spectroscopy, scanning electron microscopy, and X‐ray photoelectron spectroscopy. The chain lengths and hydrophobic monomer ratio of the grafting linear polymer had significant effects on the hydrophobicity and adsorption capacity of agar microspheres at different temperatures. The thermoresponsive microspheres were used for separation of proteins and showed binding and release behavior by change of temperatures without change in mobile phase composition. Thus, we suggest thermoresponsive agar microspheres as an alternative separation media for all‐aqueous bioseparations.     

Design of a ruthenium(III) immobilized affinity material based on a β‐cyclodextrin‐functionalized poly(glycidyl methacrylate‐ethylene dimethacrylate) monolith for the enrichment of hippuric acid

Immobilized metal affinity chromatography has drawn great attention as a widespread separation and purification approach. In this work, ruthenium was firstly introduced into the preparation of immobilized metal affinity chromatography considering its affinity to N,O‐donor ligands. A β‐cyclodextrin‐functionalized poly(glycidyl methacrylate‐ethylene dimethacrylate) monolith was designed and employed as the supporting material in immobilized metal affinity chromatography. Thiosemicarbazide was introduced into the synthesis process, which not only acted as a bridge between β‐cyclodextrin and glycidyl methacrylate, but also chelated with ruthenium because of its mixed hard‐soft donor characteristics. The developed monolithic ruthenium(III)‐immobilized metal affinity chromatography column was utilized for the adsorption and separation of hippuric acid, a biological indicator of toluene exposure. To achieve high extraction capacity, the parameters affecting the extraction efficiency were investigated with an orthogonal experiment design, L9 (3⁴). Under the optimized conditions, the enrichment factor of hippuric acid was 16.7‐fold. The method reproducibility was investigated in terms of intra‐ and interday precisions with relative standard deviations lower than 8.7 and 9.5%, respectively. In addition, ruthenium(III)‐immobilized metal affinity chromatography material could be used for up to 80 extractions without an apparent change in extraction recovery.     

Comparative evaluation of a one‐pot strategy for the preparation of β‐cyclodextrin‐functionalized monoliths: Effect of the degree of amino substitution of β‐cyclodextrin on the column performance

To further evaluate the feasibility and applicability of the one‐pot strategy in monolithic column preparation, two novel β‐cyclodextrin‐functionalized organic polymeric monoliths were prepared using two β‐cyclodextrin derivatives, i.e. mono(6‐amino‐6‐deoxy)‐β‐cyclodextrin and heptakis(6‐amino‐6‐deoxy)‐β‐cyclodextrin. In this improved method, mono(6‐amino‐6‐deoxy)‐β‐cyclodextrin or heptakis(6‐amino‐6‐deoxy)‐β‐cyclodextrin reacted with glycidyl methacrylate to generate the corresponding functional monomers and were subsequently copolymerized with ethylene dimethacrylate. The polymerization conditions for both monoliths were carefully optimized to obtain satisfactory column performance with respect to column efficiency, reproducibility, permeability, and stability. The obtained poly(glycidyl methacrylate‐mono(6‐amino‐6‐deoxy)‐β‐cyclodextrin‐co‐ethylene dimethacrylate) and poly(glycidyl methacrylate‐heptakis(6‐amino‐6‐deoxy)‐β‐cyclodextrin‐co‐ethylene dimethacrylate) monoliths exhibited a uniform structure, good permeability, and mechanical stability as indicated by scanning electron microscopy and micro‐high‐performance liquid chromatography experimental results. Because of the probable existence of multi‐glycidyl methacrylate linking spacers on the poly(glycidyl methacrylate‐heptakis(6‐amino‐6‐deoxy)‐β‐cyclodextrin‐co‐ethylene dimethacrylate) monolith, the effect of the ratio of glycidyl methacrylate/heptakis(6‐amino‐6‐deoxy)‐β‐cyclodextrin was especially studied, and satisfactory reproducibility could still be achieved by strictly controlling the composition of the polymerization mixture. To investigate the effect of the degree of amino substitution of β‐cyclodextrin on column performance, a detailed comparison of the two monoliths was also carried out using series of analytes including small peptides and chiral acids. It was found that the β‐cyclodextrin‐functionalized monolith with mono‐glycidyl methacrylate linking spacers demonstrated better chiral separation performance than that with multi‐glycidyl methacrylate linking spacers.     

Supermacroporous hydrophobic affinity sorbents for penicillin acylase purification

Penicillin acylase (PA, EC 3.5.1.11) is used as a raw material in the production of semi-synthetic penicillins. Although there are many methods for PA purification, affinity chromatography is advantageous as it provides efficient one step purification. In this study, poly(2-hydroxyethyl methacrylate) based cryogel column containing hydrophobic N-methacryloyl-L-tryptophan (MATrp) functional monomer as a ligand was prepared. Interaction of MATrp with amino acids in PA structure is the basis of hydrophobic interaction chromatography in this study. PHEMA and PHEMATrp cryogel columns were characterized by surface area measurements, infrared spectroscopy, swelling tests, elemental analysis and scanning electron microscopy (SEM). Initial PA concentration, pH, effect of temperature, amount of ligand, flow rate, ionic strength and time on PA adsorption on PHEMATrp cryogel were investigated. Optimum pH was determined as 5.0 for PA adsorption and maximum adsorption capacity was obtained as 6.40 mg/g. It was observed that adsorption capacity increased with the increasing of temperature. Also, PA adsorption increased up to 0.25 M salt concentration and decreased in higher salt concentrations. Data obtained in this affinity system suggests that hydrophobic interactions are dominant. In the last stage of the study, PA was purified from Penicillium chrysogenum with 76.3% yield and 332.3 purification factor.     

Novel functionalized poly(glycidyl methacrylate‐co‐ethylene dimethacrylate) microspheres for the solid‐phase extraction of glycopeptides/glycoproteins

Novel 3‐aminophenylboronic acid functionalized poly(glycidyl methacrylate‐co‐ethylene dimethacrylate) microspheres were prepared for the solid‐phase extraction of glycopeptides/glycoproteins. The adsorption efficiency, maximum adsorption capacity, and specific recognition of the microspheres to glycoprotein were investigated. The results indicated excellent adsorption of glycoproteins by the microspheres, which are attributed to the well‐defined boronic acid brushes on the microsphere surfaces. Furthermore, a solid‐phase extraction microcolumn filled with the microspheres was used to efficiently enrich glycopeptides from enzymatic hydrolysates from human serum samples. The mass spectrometry results demonstrated that the method is suitable for the separation and enrichment of glycopeptides/glycoproteins from complex biological samples.     

Photoirradiation surface molecularly imprinted polymers for the separation of 6‐O‐α‐d‐maltosyl‐β‐cyclodextrin

Photoirradiation surface molecularly imprinted polymers for the separation of 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin were synthesized using functionalized silica as a matrix, 4‐(phenyldiazenyl)phenol as a light‐sensitive monomer, and 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin as a template. Fourier transform infrared spectroscopy results indicated that 4‐(phenyldiazenyl)phenol was grafted onto the surface of functionalized silica. The obtained imprinted polymers exhibited specific recognition toward 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin. Equilibrium binding experiments showed that the photoirradiation surface molecularly imprinted polymers obtained the maximum adsorption amount of 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin at 20.5 mg/g. In binding kinetic experiments, the adsorption reached saturation within 2 h with binding capacity of 72.8%. The experimental results showed that the adsorption capacity and selectivity of imprinted polymers were effective for the separation of 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin, indicating that imprinted polymers could be used to isolate 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin from a conversion mixture containing β‐cyclodextrin and maltose. The results showed that the imprinted polymers prepared by this method were very promising for the selective separation of 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin.     

Hydrophobic cryogels for DNA adsorption: Effect of embedding of monosize microbeads into cryogel network on their adsorptive performances

As alternative hydrophobic adsorbent for DNA adsorption, supermacroporous cryogel disks were synthesized via free radical polymerization. In this study, we have prepared two kinds of cryogel disks: (i) poly(2‐hydroxyethyl methacrylate‐N‐methacryloyl‐l ‐tryptophan) [p(HEMA‐MATrp)] cryogel containing specific hydrophobic ligand MATrp; and (ii) monosize p(HEMA‐MATrp) particles synthesized via suspension polymerization embedded into p(HEMA) cryogel structure to obtain p(HEMA‐MATrp)/p(HEMA) composite cryogel disks. These cryogel disks containing hydrophobic functional group were characterized via swelling studies, Fourier transform infrared spectroscopy, elemental analysis, surface area measurements and scanning electron microscopy. DNA adsorption onto both p(HEMA‐MATrp) cryogel and p(HEMA‐MATrp)/p(HEMA) composite cryogels was investigated. Maximum adsorption of DNA on p(HEMA‐MATrp) cryogel was found to be 15 mg/g polymer. Otherwise, p(HEMA‐MATrp)/p(HEMA) composite cryogels significantly increased the DNA adsorption capacity to 38 mg/g polymer. Composite cryogels could be used repeatedly without significant loss on adsorption capacity after 10 repetitive adsorption–desorption cycles. Copyright © 2013 John Wiley & Sons, Ltd.     

Preparation of poly(vinylphenylboronic acid) chain grafted poly(glycidylmethacrylate‐co‐ethylenedimethacrylate) beads for the selective enrichment of glycoprotein

Surface‐initiated atom transfer radical polymerization was successfully used to prepare 4‐vinylphenylboronic acid functionalized poly(glycidylmethacrylate‐co‐ethylenedimethacrylate) beads for the selective enrichment of glycoprotein from complex biological samples in this study. The modified bead surfaces were characterized using Fourier transform infrared spectroscopy and X‐ray photoelectron spectroscopy. The sorption behaviors, including adsorption isotherms, incubation time, and pH effect, were investigated. The results demonstrated that the boronated beads have a high affinity for glycoprotein, which is due to the well‐defined boronic acid brushes on the beads surfaces. Furthermore, the polyvinylphenylboronic acid grafted poly(glycidylmethacrylate‐co‐ethylenedimethacrylate) beads were used to efficiently enrich and purify glycoprotein from real egg white samples and α‐fetoprotein from human serum samples. The mass spectrometry results demonstrated that the polyvinylphenylboronic acid grafted poly(glycidylmethacrylate‐co‐ethylenedimethacrylate) beads are a suitable material for the enrichment of glycosylated protein from complex biological samples.     

含氨基聚甲基丙烯酸羟乙酯树脂对胆红素的吸附性能研究

以交联聚甲基丙烯酸羟乙酯树脂为载体,以己二胺和多乙烯多胺为功能基制备了一系列胆红素吸附剂,研究了它们在不同吸附温度、离子强度和胆红素浓度等条件下,对胆红素的吸附性能的影响.研究表明,该类吸附剂对胆红素具有良好的吸附性能,其中以己二胺和质子化己二胺为功能基的吸附剂对胆红素的吸附作用最佳.     

Hydrophobic‐hydrophilic monolithic dual‐phase layer for two‐dimensional thin‐layer chromatography coupled with surface‐enhanced Raman spectroscopy detection

Hydrophobic‐hydrophilic monolithic dual‐phase plates have been prepared by a two‐step polymerization method for two‐dimensional thin‐layer chromatography of low‐molecular‐weight compounds, namely, several dyes. The thin 200 μm poly(glycidyl methacrylate‐co‐ethylene dimethacrylate) layers attached to microscope glass plates were prepared using a UV‐initiated polymerization method within a simple glass mold. After cutting and cleaning the specific area of the layer, the reassembled mold was filled with a polymerization mixture of butyl methacrylate and ethylene dimethacrylate and subsequently irradiated with UV light. During the second polymerization process, the former layer was protected from the UV light with a UV mask. After extracting the porogens and hydrolyzing the poly(glycidyl methacrylate‐co‐ethylene dimethacrylate) area, these two‐dimensional layers were used to separate a mixture of dyes with great difference in their polarity using reversed‐phase chromatography mode within the hydrophobic layer and then hydrophilic interaction chromatography mode along the hydrophilic area. In the latter dimension only the specific spot was developed further. Detection of the separated dyes could be achieved with surface‐enhanced Raman spectroscopy.