Acid interferences in atomic spectrometry: analyte signal effects and subsequent reduction

When considering elemental analysis by atomic spectrometry techniques (e.g. flame atomic absorption spectrometry, inductively coupled plasma atomic emission spectrometry and inductively coupled plasma mass spectrometry), the sample is normally introduced as a solution. In many instances an acid is present in that solution, as a result of previous sample preparation steps, analyte stabilization procedures, etc. Therefore, acids are among the most common matrices involved in spectroscopic analysis. The effect of the acid on the different stages taking place during the whole analytical process has been reviewed. Attention has been paid to the three techniques mentioned above. The results summarized here reveal the crucial role that acids play in atomic spectrometry, being one of the most important sources of interferences suffered by these techniques. In the last part of this bibliographic survey, the methods found for correction of the acid effect are mentioned and briefly described.     

Speciation and detection of arsenic in aqueous samples: A review of recent progress in non-atomic spectrometric methods

Inorganic arsenic (As) displays extreme toxicity and is a class A human carcinogen. It is of interest to both analytical chemists and environmental scientists. Facile and sensitive determination of As and knowledge of the speciation of forms of As in aqueous samples are vitally important. Nearly every nation has relevant official regulations on permissible limits of drinking water As content. The size of the literature on As is therefore formidable. The heart of this review consists of two tables: one is a compilation of principal official documents and major review articles, including the toxicology and chemistry of As. This includes comprehensive official compendia on As speciation, sample treatment, recommended procedures for the determination of As in specific sample matrices with specific analytical instrument(s), procedures for multi-element (including As) speciation and analysis, and prior comprehensive reviews on arsenic analysis. The second table focuses on the recent literature (2005–2013, the coverage for 2013 is incomplete) on As measurement in aqueous matrices. Recent As speciation and analysis methods based on spectrometric and electrochemical methods, inductively coupled plasma-mass spectrometry, neutron activation analysis and biosensors are summarized. We have deliberately excluded atomic optical spectrometric techniques (atomic absorption, atomic fluorescence, inductively coupled plasma-optical emission spectrometry) not because they are not important (in fact the majority of arsenic determinations are possibly carried out by one of these techniques) but because these methods are sufficiently mature and little meaningful innovation has been made beyond what is in the officially prescribed compendia (which are included) and recent reviews are available.     

植物样品中痕量砷的形态分析研究进展

介绍了近十年来国内外植物样品中包括药用植物中砷的形态分析研究进展。由于植物中的砷含量甚低,其主要的检测手段是:氢化物电感耦合等离子体原子吸收光谱法(HG-ICP-AAS)、高效液相色谱-等离子体质谱法(HPLC-ICP-MS)、氢化物原子荧光光谱法(HG-AFS)。     

Determination of vanadium in petroleum and petroleum products using atomic spectrometric techniques

Vanadium is recognized worldwide as the most abundant metallic constituent in petroleum. It is causing undesired side effects in the refining process, and corrosion in oil-fired power plants. Consequently, it is the most widely determined metal in petroleum and its derivatives. This paper offers a critical review of analytical methods based on atomic spectrometric techniques, particularly flame atomic absorption spectrometry (FAAS), electrothermal atomic absorption spectrometry (ET AAS), inductively coupled plasma optical emission spectrometry (ICP OES), inductively coupled plasma mass spectrometry (ICP-MS). In addition an overview is provided of the sample pretreatment and preparation procedures for vanadium determination in petroleum and petroleum products. Also included are the most recent studies about speciation and fractionation analysis using atomic spectrometric techniques.     

Recent advances in on-line coupling of capillary electrophoresis to atomic absorption and fluorescence spectrometry for speciation analysis and studies of metal-biomolecule interactions

Speciation information is vital for the understanding of the toxicity, mobility and bioavailability of elements in environmental or biological samples. Hyphenating high resolving power of separation techniques and element-selective detectors provides powerful tools for studying speciation of trace elements in environmental and biological systems. During the last five years several novel hybrid techniques based on capillary electrophoresis (CE) and atomic spectrometry have been developed for speciation analysis and metal-biomolecule interaction study in our laboratory. These techniques include CE on-line coupled with atomic fluorescence spectrometry (AFS), chip-CE on-line coupled with AFS, CE on-line coupled with flame heated quartz furnace atomic absorption spectrometry (FHF-AAS), and CE on-line coupled with electrothermal atomic absorption spectrometry (ETAAS). The necessity for the development of these techniques, their interface design, and applications in speciation analysis and metal-biomolecule interaction study are reviewed. The advantages and limitations of the developed hybrid techniques are critically discussed, and further development is also prospected.     

Sample digestion methods for the determination of traces of precious metals by spectrometric techniques.

Recent advances in digestion methods used in the analysis of precious metal samples by spectrometric techniques are reviewed. The applicability of a fire assay, a wet acid treatment, chlorination and alkaline oxidizing fusion to a quantitative recovery of metals from various materials is discussed. Data on the precious metal contents obtained by using particular digestion methods as well as UV-VIS spectrophotometry, atomic absorption spectrometry, atomic emission spectrometry and inductively coupled plasma mass spectrometry in the examination of various samples are tabulated.     

Comparison of ten digestion procedures for the determination of arsenic in soils by hydride-generation atomic absorption spectrometry

Ten different digestion methods were investigated for the determination of arsenic in soils by hydride-generation atomic absorption spectrometry. These methods included a dry ashing/digestion, several acid-leaching procedures, and digestions in a pressure decomposition vessel or a Kjeldahl apparatus. A certified reference sample was analysed and the results obtained for five other soil samples were compared with the data obtained by spectrophotometry. A nitric/sulphuric acid digestion was the most suitable. A brief interference study is reported.     

Evolved-gas zeeman flame atomic absorption spectrometry for the determination of arsenic compounds

An evolved-gas separation/flame Zeeman atomic absorption spectrometric approach is demonstrated for the speciation and determination of arsenic in oyster tissue. No digestion is needed and separation of inorganic arsenic compounds having similar boiling points is achieved. A stoichiometric or air-rich acetylene/air flame for atomic absorption spectrometry is not generally suitable for arsenic determination because of severe ultraviolet absorption interference at 193.7 nm and low sensitivity; polarized flame Zeeman atomic absorption spectrophotometry with a fuel-rich flame is suitable for the detection of traces of arsenic. The evolved-gas separation/Zeeman atomic absorption approach is simple, based on commercially available instrumentation, and useful for the selective determination of major arsenic compounds. Data are given to demonstrate optimal conditions and to show application to oyster tissue.     

Mercury speciation by CE: a review

CE methods for the speciation of inorganic and organomercury compounds are reviewed. Sample preparation, separation conditions and detection modes are discussed. Efficient separation and sensitive determination of mercury species by CE typically involves complexation with various thiols, chromogenic and other chelating agents; however, some methods do not require complexation. Spectrophotometric detection based on UV-visible absorption is by far the most commonly used. Hyphenated techniques, such as CE/inductively coupled plasma (ICP)-MS, hydride generation coupled to ICP-MS or atomic fluorescence spectrometry and CE/atomic absorption spectrometry are gaining popularity due to their high sensitivity and selectivity. Last, but not least, the potential and applications of electrochemical methods for detection of separated mercury species are outlined.     

Spectrophotometric determination of lithium with Quinizarin in drugs and serum

An endemic peripheral vascular disorder resulting in gangrene of the lower extremities, especially of the feet, is called 'Blackfoot disease (BFD)'. Clinically, the symptoms and signs of Blackfoot disease are similar to those of Buerger's disease. In this study, the objective is to examine the amount of arsenic, mercury, zinc, lead, and selenium in urine samples from BFD patients. After pre-treatment with acids, the samples were digested by means of a microwave oven. The determination of arsenic mercury, zinc, lead and selenium were by hydride atomic absorption spectrometry (HAAS), cold vapor atomic absorption spectrometry (CVAAS), flame atomic absorption spectrometry (FAAS), graphite furnace absorption spectrometry (GFAAS), respectively. The results indicated that urinary arsenic, mercury and lead of the BFD patients were significantly higher than those of the normal controls, while urinary zinc and selenium were significantly lower than those of the normal controls. The possibility that these elements are involved in the etiology of diseases is discussed.     

Arsenic speciation in some environmental samples: a comparative study of HG–GC–QFAAS and HPLC–ICP–MS methods

Some water and soil extracts polluted with arsenic, and a sewage sludge certified for total arsenic have been analysed by high‐performance liquid chromatography–inductively coupled plasma–mass spectrometry (HPLC–ICP–MS) and hydride generation–gas chromatography– quartz furnace atomic absorption spectrometry (HG–GC–QFAAS techniques.) Detection limits in the range of 200–400 and 2–10 ng l⁻¹ respectively allowed the determination of inorganic [As(III), As(V)] and methylated (DMA, MMA, TMAO) arsenic species present in these samples. Results obtained by both methods are well correlated overall, whatever the arsenic chemical form and concentration range (8–10 000 μg l⁻¹). Comparison of these results enabled us to point out features and disadvantages of each analytical method and to reach a conclusion that they are suitable for arsenic speciation in these environmental matrices. Copyright © 2000 John Wiley & Sons, Ltd.     

Uranium determination using atomic spectrometric techniques: An overview

This review focuses on the determination of uranium using spectroanalytical techniques that are aimed at total determination such as flame atomic absorption spectrometry (FAAS), electrothermal atomic absorption spectrometry (ETAAS), inductively coupled plasma optical emission spectrometry (ICP-OES); and inductively coupled plasma mass spectrometry (ICP-MS) that also enables the determination of uranium isotopes. The advantages and shortcomings related to interferences, precision, accuracy, sample type and equipment employed in the analysis are taken into account, as well as the complexity and costs (i.e., acquisition, operation and maintenance) associated with each of the techniques. Strategies to improve their performance that employ separation and/or preconcentration steps are considered, with an emphasis given to solid-phase extraction because of its advantages compared to other preconcentration procedures.     

Twenty-five years of analytical atomic spectroscopy

Developments in atomic spectrometry are traced over the twenty-five years from 1960–1985. Although a few other methods are briefly mentioned, greatest emphasis is placed on emission, absorption and fluorescence techniques. Two emission approaches are considered in detail and are based on the high-voltage spark and on the inductively-coupled plasma, respectively. Atomic absorption progress is followed from its earliest introduction, through the trial-and-error improvement of instrumentation, to the recent availability of fully automated commercial systems. Finally, the youngest of the methods, fluorescence spectrometry, is described, its strengths and weaknesses reviewed, and its future potential assessed.     

Low pressure chromatographic separation of inorganic arsenic species using solid phase extraction cartridges

Routine water analysis of arsenic species requires simple, inexpensive, rapid and sensitive methods. To this end, we have developed two methods, which are based on the use of inexpensive solid phase extraction (SPE) cartridges as low pressure chromatographic columns for separation and hydride generation atomic absorption spectrometry (HGAAS) and hydride generation atomic fluorescence spectrometry (HGAFS) for detection of arsenic. Both anion exchange and reverse phase cartridges were successfully used to separate arsenite [As(III)] and arsenate [As(V)]. The composition, concentration, and pH of eluting buffers and the effect of flow rate were systematically investigated. Speciation of inorganic As(III) and As(V) were achieved within 1.5 min, with detection limits of 0.2 and 0.4 ng/ml, respectively. Both isocratic and step gradient elution techniques were suitable for the baseline resolution of As(III) and As(V) using anion exchange cartridges. Application of the methods to the speciation of As(III) and As(V) in untreated water, tap water, and bottled water samples were demonstrated. Results from the speciation of arsenic in a standard reference material water sample using these methods were in good agreement with the certified value and with inter-laboratory comparison results obtained using HPLC separation and inductively coupled plasma mass spectrometric detection (HPLC-ICPMS).     

Sample pre-treatment methods for the trace elements determination in seafood products by atomic absorption spectrometry

Different sample pre-treatments for seafood products have been compared with determine trace elements (As, Cd, Cr, Cu, Fe, Mg, Mn, Ni, Pb, Se and Zn) by flame atomic absorption spectrometry (FAAS) and electrothermal atomic absorption spectrometry (ETAAS). Classic pre-treatments as microwave assisted-acid digestion and the slurry sampling technique were compared with new procedures such as microwave energy or ultrasound energy assisted-acid leaching process and enzymatic hydrolysis methodologies based on the use of pronase E. The methods were applied to DORM-1 and DOLT-1 reference materials with certified contents for the studied elements. The Student-Newman-Keuls (SNK) method was used to compare with element concentration means obtained with each sample pre-treatment and also the certified concentration means in both reference materials. Multivariate techniques such as principal components analysis (PCA) was also applied to comparative purposes.     

Elimination of Inteferences in Trace Element Determination by Graphite Furnace Atomic Absorption Spectrometry

Graphite furnace atomic absorption spectrometry has been recognized as one of the most sensitive and selective analytical techniques for trace element determination. It is especially suitable for the measurement of parts-per-billion levels of essential or toxic elements like selenium,arsenic, germanium or lead in environmental and biological samples.     

Speciation of oxidation states of elements by capillary electrophoresis

Progress made in the last five years in the application of capillary electrophoresis methods to chemical speciation of elements is reported on the basis of over 100 literature references. The main trends observed include development of new on‐ and off‐capillary derivatization methods, application of new detection methods, and especially coupling of CE separation systems to powerful atomic spectroscopy and mass spectrometry instruments with various ionization techniques, providing either a sensitive element‐specific detection method or a third dimension for high performance separation. Besides numerous CZE and MEKC capillary electrophoresis methods only very few examples of CE speciation with capillary electrochromatography can be found. Concerning the chemical forms of elements determined, the new procedures developed are mostly focused on redox speciation of various oxidation states of elements, metal‐bound high molecular compounds, and organometallic species.     

人发的光谱分析进展

评述了用分光光度、荧光（原子荧光）、原子吸收、原子发射光谱方法进行人发中我种元素测定的分析（包括发样采集、洗涤、消化），引用文献９６篇。     

The determination of arsenic and selenium in coal by continuous flow hydride-generation atomic absorption spectrometry and atomic fluorescence spectrometry

Concentrated perchloric acid is used to digest coal for subsequent determination of arsenic and selenium by hydride-generation atomic absorption and fluorescence spectrometry. Arsenic and selenium are removed from potentially interfering metal ions by coprecipitation with lanthanum hydroxide. The detection limits, 58 and 36 ng g^?1 by atomic absorption and 25 and 10 ng g^?1 by atomic fluorescence, for arsenic and selenium in coal, respectively, are adequate for the normal levels of these metals.     

Determination of inorganic arsenic species As(III) and As(V) by high performance liquid chromatography with hydride generation atomic absorption spectrometry detection

The paper presents the principles and advantages of a technique combining high performance liquid chromatography and hydride generation atomic absorption spectrometry (HPLC-HGAAS) applied to speciation analysis of inorganic species of arsenic As(III) and As(V) in ground water samples. With separation of the arsenic species on an ion-exchange column in the chromatographic system and their detection by the hydride generation atomic absorption spectrometry, the separation of the analytical signals of the arsenic species was excellent at the limits of determination of 1.5 ng/ml As(III) and 2.2 ng/ml As(V) and RSD of 4.3% and 7.8% for the concentration of 25 ng/ml. The hyphenated technique has been applied for determination of arsenic in polluted ground water in the course of the study on migration of micropollutants. For total arsenic concentration two independent methods: HGICP-OES and HGAAS were used for comparison of results of real samples analysis.