Spectrofluorimetric determination of titanium,zirconium and hafnium and their binary mixtures with biacetylmonoxime nicotinylhydrazone

The synthesis, characteristics and analytical applications of biacetylmonoxime nicotinylhydrazone are described. This compound forms fluorescent complexes with titanium(IV) (λ_ex = 430, λ_em = 540 nm), zirconium (λ_ex = 415 nm, λ_em = 505 nm) and hafnium (λ_ex = 400, λ_em = 500 nm) in an acidic medium. Titanium forms a 1:2 metal:ligand complex, whereas zirconium and hafnium form 1:2:1 metal:ligand:sulphate ternary complexes. Highly selective spectrofluorimetric methods for titanium (20–100 ng ml^?1), zirconium and hafnium (5–100 ng ml^?1) are proposed, and procedures for the analysis of binary mixtures of these ions are described.     

Pyridoxal Nicotinylhydrazone as Fluorimetric Reagent for the Determination of Zinc by Ternary Complex FORMATION

Abstract

A new spectrofluorimetric method for the determination of zinc using pyridoxal nicotinylhydrazone as the reagent has been developed. This system forms a ternary complex with ammonia, ethylenediamine or pyridine with a stoichiometry ratio of 1:1:1. The interferences of foreign ions have been determined.     

Spectrophotometric determination of zirconium with pyridoxal salicyloylhydrazone

The synthesis, characteristics and analytical applications of pyridoxal salicyloylhydrazone are described. The reaction between zirconium(IV) and this reagent was studied spectrophotometrically. A yellow 1:2 Zr:L complex (? = 2.4 × 10⁴ l mol^-1 cm^-1 at 395 nm) is formed from pH 3.5 to 5 M hydrochloric acid in an aqueous solution containing 2% dimethylformamide and 28% ethanol. The method is highly selective and is applied to the determination of zirconium in a steel and a nickel—chromium alloy.     

Application of INAA for investigation of magnesium and aluminium oxide materials

The paper presents investigations of changes in optical absorption and photo luminescence spectra of magnesium oxide, and natural and synthetic magnesium aluminium spinel related with the content of transition metal ions (Cr, Fe, Mn) and the irradiation with fast neutrons. Six synthetic single magnesium aluminium spinel crystals with different stoichiometry (MgO·nAl₂O₃), five natural crystals from Ural and Pamir deposits, and seven MgO crystals were studied. Micro impurities (Cr, Fe, and Mn) and macro component (Mg, Al) quantities have been determined using the instrumental neutron activation analysis technique. Concentrations of impurities in different spinels were found in following ranges: for Cr—1 × 10^?4 to 8 × 10^?2 %, for Mn—2 × 10^?5 to 23 %, for Fe—1 × 10^?4 to 1.2 %. Three ranges of luminescence: 380–460, 650–850 and 850–1,050 nm, were established in the most part of the investigated MgO samples. Analysis shows that the intensity of emission in each of these regions is strongly dependent on the concentration of transition metal ions. Great deviation from the stoichiometry of the irradiated MgO·2.8Al₂O₃ crystal leads to the local structure of α-Al₂O₃ formation around Cr³⁺ ions. The orange emission is attributed to Mn²⁺ in octahedral coordination, it can be assumed that the band at 570 nm is belonging to the complex centre “Mn²⁺–F⁺ (or F centre)”.     

An unexpected dinuclear Cu(II) complex with a bis(Salamo) chelating ligand: synthesis,crystal structure,and photophysical properties

An unexpected dinuclear Cu(II) complex, [Cu₂(L²)₂], has been synthesized via complexation of Cu(II) acetate monohydrate with a bis(Salamo) ligand H₂L¹. Catalysis of Cu(II) ions results in unexpected cleavage of two N–O bonds in H₂L¹, giving a dialkoxo-bridged dinuclear Cu(II) complex. Each Cu(II) complex possesses a Cu–O–Cu–O four-membered ring instead of the usual bis(Salamo) [Cu₂L¹] complex with H₂L¹. The H₂L¹ molecule is stabilized by intramolecular O1–H1?N1 hydrogen bonds and π?π stacking interactions linking adjacent molecules into a 1-D infinite zigzag chain. In the structure of the Cu(II) complex, intermolecular hydrogen bonds have stabilized the Cu(II) complex to form a self-assembling infinite 1-D linear chain. Furthermore, the H₂L¹ ligand shows intense photoluminescence with two emissions at ca. 370 and 464 nm upon excitation at 310 nm. The Cu(II) complex shows photoluminescence with maximum emission at ca. 423 nm upon excitation at 370 nm.     

{4‐[(Carbamimidoylhydrazono)methyl‐κ2N1,N4]‐5‐hydroxymethyl‐2‐methylpyridinium‐3‐olate‐κO}(methanol‐κO)copper(II) dinitrate

The title compound, [Cu(C₉H₁₃N₅O₂)(CH₄O)](NO₃)₂, consists of square‐planar cationic complex units where the Cu^II centre is coordinated by an N,N′,O‐tridentate pyridoxal–aminoguanidine Schiff base adduct and a methanol molecule. The tridentate ligand is a zwitterion exhibiting an almost planar conformation. The dihedral angles between the mean planes of the pyridoxal ring and the six‐ and five‐membered chelate rings are all less than 2.0°. The charge on the complex cation is neutralized by two nitrate counter‐ions. Extensive N—H...O and C—H...O hydrogen bonding connects these ionic species and leads to the formation of layers. The pyridoxal hydroxy groups are the only fragments that deviate significantly from the flat layer structure; these groups are involved in O—H...O hydrogen bonding, connecting the layers into a three‐dimensional crystal structure.     

Syntheses and crystal structures of two magnesium–tetrazole compounds in salt and polymeric forms

Two alkaline earth–tetrazole compounds, namely catena‐poly[[[triaquamagnesium(II)]‐μ‐5,5′‐(azanediyl)ditetrazolato‐κ³N¹,N^1′:N⁵] hemi{bis[μ‐5,5′‐(azanediyl)ditetrazolato‐κ³N¹,N^1′:N²]bis[triaquamagnesium(II)]} monohydrate], {[Mg(C₂HN₉)(H₂O)₃][Mg₂(C₂HN₉)₂(H₂O)₆]_0.5·H₂O}_n, (I), and bis[5‐(pyrazin‐2‐yl)tetrazolate] hexaaquamagnesium(II), (C₅H₃N₆)[Mg(H₂O)₆], (II), have been prepared under hydrothermal conditions. Compound (I) is a mixed dimer–polymer based on magnesium ion centres and can be regarded as the first example of a magnesium–tetrazolate polymer in the crystalline form. The structure shows a complex three‐dimensional hydrogen‐bonded network that involves magnesium–tetrazolate dimers, solvent water molecules and one‐dimensional magnesium–tetrazolate polymeric chains. The intrinsic cohesion in the polymer chains is ensured by N—H...N hydrogen bonds, which form R₂²(7) rings, thus reinforcing the propagation of the polymer chain along the a axis. The crystal structure of magnesium tetrazole salt (II) reveals a mixed ribbon of hydrogen‐bonded rings, of types R₂²(7), R₂²(9) and R₂⁴(10), running along the c axis, which are linked by R₂⁴(16) rings, generating a 4,8‐c flu net.     

1, 8-Dihydroxyanthraquinone-Ca(II) Reaction. Spectrofluorimetric Determination of Traces of Ca(II)

Abstract

1, 8-Dihydroxyanthraquinone (1, 8-DHAn) shows a fluorescent reaction with Ca(II) ion in ethanol-water mixtures and ammoniacal medium.

In the present work the 1, 8-DHAn-Ca(II) complex has been studied spectrofluorimetrically. The complex shows two excitation maxima at 485 nm and 495 nm and its emission maximum is centered at 615 nm. A 2:1 (R:C) stoichiometry and a log K_est of 7.38±0.22 for the overall equilibrium have been found for the complex.

A new method for the spectrofluorimetric determination of Ca(II) between 50 and 550 ngml^?1 has been proposed. The interference level of foreign ions has been established.     

Synthesis of o,o′-dihydroxyazo compounds and their application to the determination of magnesium and calcium by flow injection analysis

Seven _o,o′-dihydroxyazo dyes were synthesized and examined as spectrophotometric reagents for magnesium and calcium. These reagents are highly sensitive for magnesium (? = 47 000) and calcium (? = 39 000 l mol^?1 cm^?1). Of the reagents synthesized, 2-(2-hydroxy-3,6-disulfo-1-naphthylazo)-5-(N,N-diethylamino)phenol was the best because of its ease of preparation and purification, and its stability in alkaline solution. This dye was applied in the determination of magnesium and calcium by flow injection analysis. The total concentration of magnesium (0.1–1.2 mg 1^?1) and calcium (0.4–4.0 mg 1^?1) was determined by masking iron(III), aluminium(III), copper(II), zinc(II), manganese(II) and cadmium(II) with 2,3-dimercapto-1-propanol (DMP) and triethanolamine (TEA). Magnesium was determined by masking calcium and the other metal ions with a ligand buffer containing barium(II)—EGTA, DMP and TEA. The amount of calcium was obtained as the difference between the two peak heights. Results for the determination of magnesium and calcium in potable water and serum are presented.     

Spectrophotometric determination of nickel with 1-(1,2,4-triazolyl-3-azo)-2-naphthol with application to steel

Nickel(II) reacts with 1-(1,2,4-triazolyl-3-azo)-2-naphthol (TRAN) in aqueous 40% ethanol at pH 5 to form a red 1:2 complex having an absorption peak at 523 nm. The system conforms to Beer's Law in the range 0.2–2.8 ppm Ni(II). The molar absorptivity is 3.7 × 10⁴ l mol^-1 cm^-1. Various interferences can be avoided by extraction of the Ni(II)—TRAN complex into chloroform, which allows determinations of nickel in steels.     

Palladium(II) complexes of aliphatic amines and their oxidation by chloramine‐T in perchloric acid medium

The formation of palladium(II) complexes with aliphatic amines and their oxidation by chloramine‐T in perchloric acid medium has been studied. The spectrophotometric studies showed the formation of 1:1 and 1:2 complexes between palladium(II) and amine in absence of HClO₄. An increase in [HClO₄] in reaction mixture suppresses the complex formation and in presence of [HClO₄] ～10^?3 mol dm^?3 only a 1:1 complex between palladium(II) and amine has been observed. The effect of Cl^? on the complex formation has also been studied. Palladium(II)‐catalyzed oxidation of these amines by chloramine‐T showed a first‐order dependence of rate with respect to each—oxidant, substrate, catalyst, and H⁺. The mechanism consistent with kinetic data for the oxidation process has been proposed in absence as well as in presence of initial [Cl^?]. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 603–612, 2002     

混价四核铜(I/II)配合物[Cu_2L_2][Cu(pht)_2]_2的合成、晶体结构及性质研究

报道四核铜配合物[Cu2L2][Cu(pht)2]2[Hpht:苯妥英,即5,5-二苯基-2,2咪唑烷酮;L:N-(3-氨基丙基)二乙醇胺]的溶剂热合成、晶体结构及其性质研究.该晶体属单斜晶系,P21/n空间群,晶胞参数:a=0.9240(1)nm,b=2.4559(2)nm,c=1.5572(2)nm,β=97.489(2)o,V=3.5035(7)nm3,Dc=1.499Mg/m3(g/cm3),Z=2,F(000)=1636,μ=1.270mm-1,R1=0.0503,wR2=0.1135[I2σ(I)],GOF=1.014.XPS结合X射线单晶结构分析,表明该配合物分子有混价铜组成,包括两个Cu(I)和两个Cu(II),其中每个Cu(I)分别与两个苯妥英配体提供的氮原子配位,N—Cu(I)—N的夹角为177.1°,每个Cu(II)与L配体的五个配位原子配位(N2O3),形成一个稍变形四方锥结构,两个Cu(II)通过N-(3-氨基丙基)二乙醇胺中的一个羟基氧桥连接形成双核阳离子,琼脂扩散法测试结果表明配合物、配体和铜盐对3种受试细菌均有一定的活性.配合物与DNA的相互作用测定研究表明,该配合物是以插入方式与小牛胸腺DNA结合.     

Analytical study of the phenyl-2-pyridyl ketone azine-palladium system. Photometric determination of palladium

Phenyl-2-pyridyl ketone azine reacts with palladium(II) to produce a yellow 1:1 complex (λ_max = 425 nm, ? = 10.4 × 10³M^?1 cm^?1 in aqueous ethanolic solution) and a red-violet 3:1 complex (λ_max = 530?540 and 380?390 nm). The yellow complex in aqueous ethanolic solution has been used for the spectrophotometric determination of trace amounts of palladium. The method has been applied to the determination of palladium in some catalysts and one mineral.     

Transition metal complexes with thiosemicarbazide‐based ligands. XLIV. Aqua(3‐hydroxy‐5‐hydroxymethyl‐2‐methylpyridine‐4‐carboxaldehyde 3‐­methylisothiosemicarbazone‐κ3O,N1,N4)nitratocopper(II) nitrate

The title complex, [Cu(NO₃)(C₁₀H₁₄N₄O₂S)(H₂O)](NO₃), is the first metal complex with a Schiff base derived from iso­thio­semicarbazide and pyridoxal (pyridoxal is 3‐hydroxy‐5‐­hydroxy­methyl‐2‐methyl­pyridine‐4‐carbox­aldehyde). The Cu^II environment is a square pyramid, the equatorial plane of which is formed by the tridentate ONN‐coordinated iso­thio­semicarbazone and one water mol­ecule, while the nitrate ligand is in the apical position. The existence of numerous strong intermolecular hydrogen bonds, and weak C—H?O and C—H?π interactions, leads to a three‐dimensional supramolecular structure.     

Syntheses,Characterization and Equilibrium between Mono—and Aqua—bridged Dicobalt（Ⅱ）Complexes.A Structural Model for Methionine Aminopeptidase

A monomeric complex [Co(Im)₂(O₂CMe)2] (1) and a novel aquabridged dimeric complex [Co₂(μ‐H₂O)(μ‐CMe)₂(Im)₄‐(O₂CMe)₂] (2) (Im = imidazole) have been synthesized and characterized. Complexes 1 and 2 coexisted in solution. Pure forms of either complex can be obtained from the same solution by controlling the crystallization conditions. All two complexes possess a carboxylate‐Im‐cobalt(II) triad system analogous to the carboxylate‐histidine‐metal triad systems that have been found in many zinc enzymes and cobalt(II)‐substituted enzymes. In 2, two Co²⁺ ions are connected by a water molecule in a bridging fashion with Co°Co [0.3687(1) nm], Co—OH₂ [0.2159(3) nm], and Co‐OH₂‐Co [117.2(3)°], in which the water molecule is further stabilized by two intramolecular hydrogen bonds with the oxygens of the terminal monodentate acetate groups with the distance of O…0 [0.2609(7) nm]. The terminal monodentate acetate groups display quite abnormal geometry due to the strong “pulling effect” on the carboxylates by intermolecular and intramolecular hydrogen bonds. Complex 2 showed weak antiferromagnetic coupling at low temperature with g = 2.22 and J = ?1.60 cm^?1.     

Kinetic fluorometric methods for the determination of phosphates at the nanogram level using a lead(II)-catalyzed pyridoxal 2-pyridylhydrazone-hydrogen peroxide reaction

Fluorometric methods for the determination of phosphate (1.5 × 10^?6–3.1 × 10^?6M), diphosphate (7.0 × 10^?7–2.0 × 10^?6M), and triphosphate (2.0 × 10^?7–2.7 × 10^?6M) are described. The analytical procedure is based on the inhibition of polyphosphate ions on the oxidation of pyridoxal 2-pyridylhydrazone (PPH) by hydrogen peroxide, catalyzed by low concentrations of lead(II) ions. The reactions are followed by means of the rate of appearance of the fluorescence (λ_ex = 355 nm, λ_em = 425 nm). The effect of the variables is studied. The kinetic parameters of the reactions are reported and rate equations are suggested. The results are interpreted according to the discernment of the chemistry of complex formations.     

Photometric titration of vanadium(IV) with 8-hydroxyquinoline-5-sulphonic acid

Vanadium(IV) at concentrations of 10^-2–10^-4 M can be titrated at pH 5–6; the 1:2 metal—ligand complex is formed. Back-titrations with copper(II) solution and reverse titrations are also feasible. Absorbances are measured at 385 nm.     

Structure and electrospray mass spectrometry studies on dithiacyclooctan-3-ol-containing palladium (II) complex of trans -[Pd(dtco-3-OH)_2](ClO_4)_2·2DMSO

The structure of trans-[Pd(dtco-3-OH)2] (ClO4)2·2DMSO, in which dtco-3-OH is dithiacyclooctan-3-ol and DMSO is dimethyl sulfoxide, was determined by X-ray crystallographic analysis. The crystal data: space group pi, a = 0.7077(2) nm, b = 1.0788(1) nm, c = 1.1111(1) nm, α=67.710(8)°, β = 73. 59(2)°, γ = 85. 39(2)°,R1 = 0 . 0368 and Rw = 0.0998. The palladium (II) is coordinated by four sulfur atoms with a regular square planar configuration. The Pd-S distances are 0.2314(1) and 0.2317(1) nm, respectively. Both dtco-3-OH ligands are in the boat-chair configuration and two hydroxyl groups are on the opposite sites of the PdS4 coordination plane and are towards Pd(II). The Pd-O distance is 0. 285 nm, indicating a weak interaction between them. A typical hydrogen bond between the hydroxyl group of dtco-3-OH ligand and DMSO was observed in the crystal structure. An aqueous solution prepared with the crystals of the complex was used for the investigation of electrospray mass spectrometry ( ESMS ). Besid     

A Novel Proton Transfer Self‐Associated Compound from Dipicolinic Acid and Guanidine and Its Cadmium(II) Complex: Synthesis,Characterization, Crystal Structure,and Solution Studies

A novel 1:2 proton transfer self‐associated compound LH₂ , (GH⁺)₂(pydc^2—), was synthesized from the reaction of dipicolinic acid, pydcH₂, (2, 6‐pyridinedicarboxylic acid), and guanidine hydrochloride, (GH⁺)(Cl^—). The characterization was performed using IR, ¹H and ¹³C NMR spectroscopy and single‐crystal X‐ray diffraction. LH₂ · H₂O crystallizes in the space group C2/c of the monoclinic system and contains eight molecules per unit cell. The unit cell dimensions are: a = 26.480(5)Å, b = 8.055(2)Å, c = 14.068(3)Å. The first coordination complex (GH)₂[Cd(pydc)₂] · 2H₂O, was prepared using LH₂ and cadmium(II) iodide, and characterized by ¹H and ¹³C NMR spectroscopy and X‐ray crystallography. The crystal system is triclinic with space group P1¯ with one molecule per unit cell. The unit cell dimensions are: a = 8.5125(7)Å, b = 11.0731(8)Å, c = 13.2404(10)Å. The cadmium(II) atom is six‐coordinated with a distorted octahedral geometry. The two pydc^2— units are almost perpendicular to each other. The protonation constants of the building blocks of the pydc‐guanidine adduct, the equilibrium constants for the reaction of pydc^2— with guanidine and the stoichiometry and stability of the Cd²⁺ complex with LH₂ in aqueous solution were accomplished by potentiometric pH titration. The solution studies strongly support a self‐association between pydc^2— and GH⁺ with a stoichiometry for the Cd^II complex similar to that observed for the isolated crystalline complex. In fact, the [Cd(pydc)₂]^2— complex was found as the most abundant species in solution (> 90 %) at a pH >5.     

Fluorometric Determination of Traces Of Mg(II) Using 1, 5-Dihydroxyanthracuinone as Reagent

Abstract

The florescent characteristics of the complex formed by 1, 5-dihydroxyanthraquinone with Mg(II) in aqueous ethanol (λ_ex 490 nm,λ_em=600 nm; pH_ap=9.1-9.6; 10% H₂O; reagent concentration=4×10^?5M) are described. The stoichiometry and the stability constant (1:1 and log K=4.90) are determined. A new fluorometric method for the determination of 10-100 ppb Mg(II) is proposed.