Optical and diffractive studies of pyridinium-based ionic liquids

Electronic absorption, steady-state fluorescence spectra and X-ray diffraction patterns for several pyridinium-based ionic liquids (ILs) (1-butyl-3-methylpyridinium tetrafluoroborate, 1-butyl-4-methylpyridinium tetrafluoroborate, 1-octyl-3-methylpyridinium tetrafluoroborate and 1-butyl-3-methylpyridinium dicyanamide) have been obtained. A systematic study has been performed for different ILs in terms of structural characteristics obtaining remarkable results. The present characterisation, centre of attention in theoretical and practical fields, leads to understand the complex behaviour of such compounds and is an essential step for their potential development as new solvents in extended applications.     

Electrochemical behavior of nickel in electrolytes based on 1-n-butyl-3-methylimidazolium tetrafluoroborate ionic liquid for capacitor applications

Electrochemical studies were performed using Ni electrodes in solutions of a mixture of ethylene glycol or of γ-butyrolactone with 1-n-butyl-3-methylimidazolium tetrafluoroborate ionic liquid. The aim of the study was to evaluate the use of these systems in electrochemical double-layer capacitor. Cyclic voltammetry experiments showed a potential range at which the Ni electrode behaved as a polarizable electrode. Ni oxidizes at high anodic potentials. Inside the potential range without electrochemical activity, the capacitance and the solution resistance, which were evaluated by impedance electrochemical spectroscopy, were compared for the two solutions tested. Conductivity measurements of the electrolytes with different compositions were also acquired. The results of cyclic voltammetry indicated that the Ni has a wide electrochemical window and low current peak densities of oxidation in the γ-butyrolactone medium than in ethylene glycol medium. The γ-butyrolactone and 1-n-butyl-3-methylimidazolium tetrafluoroborate ionic liquid solutions had the highest conductivity values. Decreased 1-n-butyl-3-methylimidazolium tetrafluoroborate ionic liquid content in different solvent mixtures resulted in an increase in the capacitance value at the Ni/electrolyte interface. The highest capacitance values were obtained for Ni in ethylene glycol and 1-n-butyl-3-methylimidazolium tetrafluoroborate medium.     

Associative and Proton Transfer Effects on the Voltammetric Behaviour of Chemically Grafted Films Bearing Nitrophenyl Groups

The spontaneous decomposition of 4‐nitrophenyldiazonium tetrafluoroborate in acetonitrile solution was used to modify glassy carbon electrodes with films bearing nitrophenyl groups. The modification procedure was performed by dipping non‐connected electrodes into the nitrophenyldiazonium solution. When these modified electrodes were analyzed by cyclic voltammetry in acetonitrile containing traces of water over a wide potential scale, only one reduction wave and two oxidation peaks were observed, which is atypical considering the reversible behaviour of the reduction of nitrobenzene in acetonitrile, however in acetonitrile containing a lower concentration of water, two consecutive reduction waves appear in the same potential scale. The difference between both behaviours is consistent with the presence of water trapped into the film structure, which promotes electron and proton transfer reactions that yield nitrosobenzene as product in surface. The trapping of water inside the film structure is justified by the capability of the nitrophenyl groups to interact with water by surface hydrogen bonding interactions.     

Suitability of ionic liquids as mobile‐phase additives in HPLC with fluorescence and UV detection for the determination of heterocyclic aromatic amines

The effects of several ionic liquids (ILs) as mobile‐phase additives in HPLC with fluorescence and UV–Vis detection for the determination of six heterocyclic aromatic amines were evaluated using two different C₁₈ stationary phases with moderate silanol activity. The studied ILs were 1‐butyl‐3‐methylimidazolium tetrafluoroborate, 1‐hexyl‐3‐methylimidazolium tetrafluoroborate and 1‐methyl‐3‐octylimidazolium tetrafluoroborate. The optical behaviour of heterocyclic aromatic amines in presence of ILs was studied and the silanol‐suppressing potency of ILs was evaluated for the two stationary phases studied. Several chromatographic parameters were evaluated in the presence or absence of ILs, or using triethylamine, the most common mobile‐phase additive. The best results were achieved using 1 mM 1‐butyl‐3‐methylimidazolium tetrafluoroborate as mobile‐phase additive and NovaPak^® column. In these conditions and with 18% of ACN in the mobile phase, analytical performance of the chromatographic methods using fluorescence and UV–Vis were evaluated, obtaining good precision in all cases (RSD lower than 6.6%) and low LOD (0.001–0.147 μg/mL with UV–Vis and 0.001–0.006 ng/mL with fluorescence detection).     

Polarity Behaviour and Specific Interactions of Imidazolium‐Based Ionic Liquids in Ethylene Glycol

The molecular interactions of the ionic liquids (ILs) 1‐butyl‐3‐methylimidazolium tetrafluoroborate [C₄mim][BF₄], 3‐methyl‐1‐octylimidazolium tetrafluoroborate [C₈mim][BF₄] and 1‐butyl‐3‐methylimidazolium octylsulfate [C₄mim][C₈OSO₃] are investigated in ethylene glycol (EG) over the whole mole fraction range using fluorescence (steady‐state and time‐resolved), Fourier transform infrared and nuclear magnetic resonance (NMR) spectroscopy. The cybotactic region surrounding the pyrene fluorescent probe exhibits peculiar characteristics for different ILs in the EG‐rich region. The extent of solute–solvent interactions is assessed by determining the deviations of experimentally observed vibronic band intensity ratios of peak 1 to peak 3 of pyrene fluorescence (I₁/I₃) from a composite I₁/I₃ value obtained using a preferential solvation model. A distinct vibrational frequency shift for various stretching modes of EG (O? H) or ILs (C? H of ring protons, B? F and S?O of anions) indicates specific interactional preferences of EG toward the IL protons/anion. Splitting of the O? H vibration band of EG at 3000–3700 cm^?1 into three separate bands, and analysis of the changes in location and area of these bands as a function of concentration enable precise determination of the effect of ILs on hydrogen bridges of EG. NMR chemical shifts and their deviations from ideality show multiple hydrogen‐bonding interactions of varying strengths between unlike molecules in the mixtures. A comparison of spectroscopic results with thermodynamic properties shows that the mixing microscopic behaviour of the investigated systems is completely different from the macroscopic behaviour, which is primarily governed by the difference in shape, size and nature of the molecules.     

Probing electric fields at the ionic liquid-electrode interface using sum frequency generation spectroscopy and electrochemistry

The arrangement of ions at the platinum electrode in the room-temperature ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate has been determined using sum frequency generation vibrational spectroscopy (SFG), electrochemical impedance spectroscopy (EIS), and the vibrational Stark effect. The results indicate that CO adsorbed on the Pt electrode has a Stark shift of 30-35 cm(-1)/V in the ionic liquid. The potential of zero charge (PZC) of the ionic liquid-Pt system is approximately -500 mV (vs Ag wire), with a capacitance of 0.12 F/m2. Further, polarization-dependent SFG experiments suggest the ions reorganize at the surface depending on the electrode charge. In combination, all these results indicate that the ions of a neat ionic liquid are organized in a Helmholtz layer at the electrified metal electrode interface.     

Effect of alkyl chain length and hydroxyl group functionalization on the surface properties of imidazolium ionic liquids

Properties of the surface of ionic liquids, such as surface tension, ordering, and charge and density profiles, were studied using molecular simulation. Two types of modification in the molecular structure of imidazolium cations were studied: the length of the alkyl side chain and the presence of a polar hydroxyl group at the end of the side chain. Four ionic liquids were considered: 1-ethyl-3-methylimidazolium tetrafluoroborate, [C(2)C(1)im][BF(4)]; 1-(2-hydroxyethyl)-3-methylimidazolium tetrafluoroborate, [C(2)OHC(1)im][BF(4)]; 1-octyl-3-methylimidazolium tetrafluoroborate, [C(8)C(1)im][BF(4)] and 1-(8-hydroxyoctyl)-3-methylimidazolium tetrafluoroborate, [C(8)OHC(1)im][BF(4)]. The surface tension was calculated using both mechanical and thermodynamic definitions, with consistent treatment of the long-range corrections. The simulations reproduce the available experimental values of surface tension with a maximum deviation of ±10%. This energetic characterization of the interface is completed by microscopic structural analysis of orientational ordering at the interface and density profiles along the direction normal to the interface. The presence of the hydroxyl group modifies the local structure at the interface, leading to a less organized liquid phase. The results allow us to relate the surface tension to the structural ordering at the liquid-vacuum interface.     

Analysis of the band profiles of the enantiomers of phenylglycine in liquid chromatography on bonded teicoplanin columns using the stochastic theory of chromatography.

The retention behaviour of the enantiomers of underivatized phenylglycine was studied on a Chirobiotic T column packed with amphoteric glycopeptide teicoplanin covalently bonded to the surface of silica gel. The retention and the selectivity of separation of the enantiomers increase with rising concentration of ethanol or of methanol in aqueous-organic mobile phases. The band profiles of the less retained L-phenylglycine are symmetrical, but the band profiles of the more strongly retained D-phenylglycine are tailing in all mobile phases tested. The band broadening does not diminish even at very low concentrations of phenylglycine, so that it cannot be attributed to possible column overload. The analysis of the band profile using the stochastic theory of chromatography suggests that the broadening can be attributed to at least two additional chiral centres of adsorption in the stationary phase contributing to the retention of the more strongly retained enantiomer in addition to the adsorption of the less retained one. This behaviour can be explained by the complex structure of the teicoplanin chiral stationary phase.     

Electron energy levels in semiconductor electrochemistry

The significance of the flat-band potential and the energetic position of the band edges at the semiconductor/electrolyte interface in semiconductor electrochemistry and photoelectrochemistry is pointed out. Different methods for determining these parameters experimentally are discussed, such as methods based on the measurement of the photovoltage or photocurrent, as well as the method for determining the flat-band potential from interfacial capacitance measurements. The capacitance-voltage relationship of the ideal semiconductor/electrolyte Schottky barrier is described. Subsequently, possible complications of the capacitance behavior are discussed, and conditions indicated under which the determination of the flat-band potential from non-ideal capacitance results is still possible. A critical survey is then given of flat-band data for some selected semiconductor electrodes (ZnO, CdS, GaP, GaAs, TiO₂, SrTiO₃), comprising a discussion of problems encountere, factors on which the flat-band potential depends and discrepancies between different results. Attempts to predict the flat-band potential and the position of the band edges from atomic electronegativity data are reviewed. The relationship between flat-band potential or band-edge position and electrochemical behaviour is considered, i.e., as far as the magnitude of the photovoltage as well as the electrochemical and photoelectrochemical reactivity are concerned.     

离子液体中硫氰根在铂电极上吸附行为的SERS研究

利用表面增强拉曼光谱(SERS)研究了室温离子液体1-丁基-3-甲基咪唑氟硼酸盐([BMIM]BF4)中SCN-在Pt电极表面的吸附行为. 研究结果表明, 离子液体中SCN-在较宽的电位范围内吸附在Pt电极上, 且SCN-的吸附方式随着电位区间的变化而变化, 在不同的电位区间内检测到了不同的Stark位移: -0.9~0.4 V约为34 cm-1/V, 对应于S端吸附; -1.6~-1.2 V约为40 cm-1/V, 该区间以N端吸附为主, 中间电位区间为吸附方式的转变区, 且Pt电极在离子液体[BMIM]BF4中的零电荷电位约为-1.1 V(vs. Pt ).     

On the Non‐Metallicity of 2.2 nm Au246(SR)80 Nanoclusters

The transition from molecular to plasmonic behaviour in metal nanoparticles with increasing size remains a central question in nanoscience. We report that the giant 246‐gold‐atom nanocluster (2.2 nm in gold core diameter) protected by 80 thiolate ligands is surprisingly non‐metallic based on UV/Vis and femtosecond transient absorption spectroscopy as well as electrochemical measurements. Specifically, the Au₂₄₆ nanocluster exhibits multiple excitonic peaks in transient absorption spectra and electron dynamics independent of the pump power, which are in contrast to the behaviour of metallic gold nanoparticles. Moreover, a prominent oscillatory feature with frequency of 0.5 THz can be observed in almost all the probe wavelengths. The phase and amplitude analysis of the oscillation suggests that it arises from the wavepacket motion on the ground state potential energy surface, which also indicates the presence of a small band‐gap and thus non‐metallic or molecular‐like behaviour.     

Evidence for significant through-space and through-bond electronic coupling in the 1,4-diphenylcyclohexane-1,4-diyl radical cation gained by absorption spectroscopy and DFT calculations

Photoinduced single-electron-transfer promoted oxidation of 2,5-diphenyl-1,5-hexadiene by using N-methylquinolinium tetrafluoroborate/biphenyl co-sensitization takes place with the formation of an intense electronic absorption band at 476 nm, which is attributed to the 1,4-diphenylcyclohexane-1,4-diyl radical cation. The absorption maximum (lambda(ob)) of this transient occurs at a longer wavelength than is expected for either the cumyl radical or the cumyl cation components. Substitution at the para positions of the phenyl groups in this radical cation by CH(3)O, CH(3), F, Cl, and Br leads to an increasingly larger redshift of lambda(ob). A comparison of the rho value, which was obtained from a Hammett plot of the electronic transition energies of the radical cations versus sigma(+), with that for the cumyl cation shows that the substituent effects on the transition energies for the 1,4-diarylcyclohexane-1,4-diyl radical cations are approximately one half of the substituent effects on the transition energies of the cumyl cation. The observed substituent-induced redshifts of lambda(ob) and the reduced sensitivity of lambda(ob) to substituent changes are in accordance with the proposal that significant through-space and -bond electronic interactions exist between the cumyl radical and the cumyl cation moieties of the 1,4-diphenylcyclohexane-1,4-diyl radical cation. This proposal gains strong support from the results of density functional theory (DFT) calculations. Moreover, the results of time-dependent DFT calculations indicate that the absorption band at 476 nm for the 1,4-diphenylcyclohexane-1,4-diyl radical cation corresponds to a SOMO-3 --> SOMO transition.     

吡啶在Au电极上吸附的紫外可见反射光谱法研究

电化学调制紫外可见反射光谱技术可用来测定金属电极上吸附物种的取向和吸附物种与金属表面间的相互作用,金属Au与已研究过的Pb、In和Pt^[1～]具有不同形式的能带结构,吸附物种与电极表面间相互作用的电位依赖性可能不同。本文测定了吡啶分子吸附时Au电极的反射差谱,并试图从能带模型角度探讨吡啶分子与Au电极表面原子间的相互作用。     

Interaction of narrow carbon nanotubes with nitronium tetrafluoroborate salts

Density functional calculations have been performed to investigate the destruction of narrow carbon nanotubes (CNTs) under the attack of nitronium tetrafluoroborate salts. The dissociation of these salts in a solvent produces nitronium and tetrafluoroborate ions which coadsorb on the external surface of the tubes. It is shown that the ions bind strongly to both metallic and semiconducting narrow nanotubes, although stronger to the metallic ones. The nitronium cations bind to the CNTs through a charge transfer mechanism, whereas the tetrafluoroborate anions remain negatively charged upon adsorption on the nanotubes. The surface of the nanotubes gets substantially deformed around the adsorption site of the nitronium ion, but it is hardly changed around the adsorption site of the tetrafluoroborate ion. These results are the theoretical basis to explain the destruction of the narrow CNTs found in the experiments and also to unravel, in agreement with the experimental interpretation, the distinct role played by the nitronium and the tetrafluoroborate ions. The tetrafluoroborate ions contribute to separate the CNTs from the bundles into individual tubes, without affecting the tubes. The nitronium ions, in contrast, modify the electronic and geometrical structures of the narrow tubes leading eventually to their destruction. The implications for the selective removal of intermediate diameter metallic CNTs found in the experiments are also discussed. The adsorption of the neutral nitrogen dioxide molecule is also studied, and the results show that the weak interactions of this molecule with both metallic and semiconducting tubes cannot be used as a model for the strong attack of the nitronium ions to the narrow tubes. The sensor effect of the nanotubes toward adsorption of nitrogen dioxide is also discussed.     

Quantifying the electrochemical maleimidation of large area graphene

The covalent modification of large-area graphene sheets by p-(N-Maleimido)phenyl (p-MP) via electrochemical grafting of p-(N-Maleimido)benzenediazonium tetrafluoroborate (p-MBDT) is successfully demonstrated for the first time. The deposition process is monitored in-situ using the mass change of a graphene/SiNX:H/Au-coated quartz crystal microbalance(QCM) chip. The resulting mass increase correlates with a maleimide thickness of approximately 2.3 molecular layers. The presence of an infrared absorption band at 1726 cm-1 shows that maleimide groups were deposited on the substrates. Raman backscattering spectra reveal the presence of D and D′ modes of the graphene layer, indicating that p-MP forms covalent bonds to graphene. Using the mass change and charge transfer during the potential cycling the faradaic efficiency of the functionalisation process was deduced, which amounts to eta = 22%.     

高导电性和催化活性的Janus-TiNbCO2析氢反应催化材料

探寻具有高导电性和高催化活性的析氢反应（HER）催化材料一直是可持续能源发展研究中的热点。Ti₂C具有表面活性位点多和优良的力学稳定性、导电性等,已成为潜在的制氢催化剂。然而,终端O修饰Ti₂C表面,会降低该材料的导电性,进而限制了电子在价带与导带间的输运。本研究通过Nb掺杂,构建双电层Janus-TiNbCO₂,并借助VASP软件研究了Janus-TiNbCO₂的能带结构、HER性能和HER反应路径过渡态。结果表明,Janus-TiNb-CO₂为导体材料,其在应力、氧空位缺陷和H*覆盖度的影响下,均表现出极优异的催化活性,计算获得的最优ΔG_H*值为0.02 eV。H*在Janus-TiNbCO₂上可能以Heyrovsky路径进行反应,该路径的迁移能势垒为0.23 eV。Janus-TiNbCO₂是一种具有HER应用前景的催化材料。     

Theory of image states at magnetic surfaces

The interaction of the spin of an electron in an image state with surface magnetism produces a spin-splitting which can be probed experimentally, most directly using spin-polarised inverse photoemission. There has been some debate about whether the spin-splitting is due to the spin-dependence of the surface potential barrier, or to the spin-dependence of the scattering of the surface state by the crystal potential. We have shown that in the case of image states at Fe(110) both effects contribute, but with opposite sign: the major effect is the effect of the crystal, and the potential barrier which has the opposite spin-polarization reduces the spin-splitting. A splitting of 55 meV is found for the n = 1 state, which has been confirmed by experiment. The dispersion of the spin-split states is discussed, particularly their interaction with the spin-split continua which produces different surface resonance behaviour for the two spins.     

Vibrational Spectroscopic Study on Ion Solvation and Ion Association of Lithium Tetrafluoroborate in 4‐Ethoxymethyl‐ethylene Carbonate

应用红外及拉曼光谱研究了不同浓度的四氟硼酸锂在4-乙氧甲基-碳酸乙烯酯溶剂中的离子溶剂化和离子缔合现象。环形变谱带和羰基伸缩振动谱带的分裂,以及骨架环振动谱带的迁移和分裂表明,锂离子与溶剂分子间存在着较强的相互作用,这种相互作用是通过溶剂羰基氧原子实现的。利用光谱拟合技术定量计算了表观溶剂化数。随着电解质锂盐浓度的增加,溶剂化数逐渐由4.32降至1.26。此外,四氟硼酸根v1谱带的分裂表明在高浓度溶液中存在着光谱自由的四氟硼酸根、直接接触离子对和离子对二聚体。     

Silicon/molecule interfacial electronic modifications

Electronic structures at the silicon/molecule interface were studied by X-ray photoelectron spectroscopy, ultraviolet photoelectron spectroscopy, inverse photoemission spectroscopy, and Kelvin probe techniques. The heterojunctions were fabricated by direct covalent grafting of a series of molecules (-C6H4-X, with X = NMe2, NH2, NO2, and Mo6 oxide cluster) onto the surface of four types of silicon substrates (both n- and p-type with different dopant densities). The electronic structures at the interfaces were thus systematically tuned in accordance with the electron-donating ability, redox capability, and/or dipole moment of the grafted molecules. The work function of each grafted surface is determined by a combination of the surface band bending and electron affinity. The surface band bending is dependent on the charge transfer between the silicon substrate and the grafted molecules, whereas electron affinity is dependent on the dipole moment of the grafted molecules. The contribution of each to the work function can be separated by a combination of the aforementioned analytical techniques. In addition, because of the relatively low molecular coverage on the surface, the contribution from the unreacted H-terminated surface to the work function was considered. The charge-transfer barrier of silicon substrates attached to different molecules exhibits a trend analogous to surface band bending effects, whereas the surface potential step exhibits properties analogous to electron affinity effects. These results provide a foundation for the utilization of organic molecule surface grafting as a means to tune the electronic properties of semiconductors and, consequently, to achieve controllable modulation of electronic characteristics in small semiconductor devices at future technology nodes.     

Redox switching and oxygen evolution at oxidized metal and metal oxide electrodes: iron in base

Outstanding issues regarding the film formation, redox switching characteristics and the oxygen evolution reaction (OER) electrocatalytic behaviour of multicycled iron oxyhydroxide films in aqueous alkaline solution have been revisited. The oxide is grown using a repetitive potential multicycling technique, and the mechanism of the latter hydrous oxide formation process has been discussed. A duplex layer model of the oxide/solution interphase region is proposed. The acid/base behaviour of the hydrous oxide and the microdispersed nature of the latter material has been emphasised. The hydrous oxide is considered as a porous assembly of interlinked octahedrally coordinated anionic metal oxyhydroxide surfaquo complexes which form an open network structure. The latter contains considerable quantities of water molecules which facilitate hydroxide ion discharge at the metal site during active oxygen evolution, and also charge compensating cations. The dynamics of redox switching has been quantified via analysis of the cyclic voltammetry response as a function of potential sweep rate using the Laviron-Aoki electron hopping diffusion model by analogy with redox polymer modified electrodes. Steady state Tafel plot analysis has been used to elucidate the kinetics and mechanism of oxygen evolution. Tafel slope values of ca. 60 mV dec(-1) and ca. 120 mV dec(-1) are found at low and high overpotentials respectively, whereas the reaction order with respect to hydroxide ion activity changes from ca. 3/2 to ca. 1 as the potential is increased. These observations are rationalised in terms of a kinetic scheme involving Temkin adsorption and the rate determining formation of a physisorbed hydrogen peroxide intermediate on the oxide surface. The dual Tafel slope behaviour is ascribed to the potential dependence of the surface coverage of adsorbed intermediates.