Synthesis of tri-layer hybrid microspheres with magnetic core and functional polymer shell

Tri-layer magnetite/silica/poly(divinylbenzene) (Fe₃O₄/SiO₂/PDVB) core-shell hybrid microspheres were prepared by distillation precipitation polymerization of divinylbenzene (DVB) in the presence of magnetite/3-(methacryloxyl)propyl trimethoxysilane (MPS) modified silica core-shell particles as seeds. The polymerization of DVB was performed in neat acetonitrile with 2,2′-azobisisobutyronitrile (AIBN) as initiator to coat magnetite/MPS-modified silica particles through the capture of DVB oligomers with the aid of vinyl groups on the surface of inorganic seeds in absence of any stabilizer or surfactant. Other magnetite/silica/polymer tri-layer hybrid particles, such as magnetite/silica/poly(ethyleneglycol dimethacrylate) (Fe₃O₄/SiO₂/PEGDMA) and magnetite/silica/poly(ethyleneglycol dimethacrylate-co-methacrylic acid) (Fe₃O₄/SiO₂/P(EGDMA-co-MAA)) with various polarity and functionality, were also prepared by this procedure. Magnetite/silica/poly(N,N′-methylenebisacrylamide-co-methacrylic acid) (Fe₃O₄/SiO₂/P(MBAAm-co-MAA)) were synthesized with unmodified magnetite/silica particles as seeds. The resultant tri-layer hybrid particles were characterized by transmission electron microscopy (TEM), Fourier transform infrared spectra (FT-IR), dynamic light scattering, and vibrating sample magnetometer (VSM).     

Ag-polymer composite microspheres with patterned surface structures

Novel silver-poly(acrylamide-co-methacrylic acid) [Ag-P(AM-co-MAA)] composite microspheres, in tens of micrometer size range, with patterned surface and core/shell structures were prepared by chemical reduction of Ag₂CrO₄-P(AM-co-MAA) composite microspheres in ethanol. Characterization with various techniques revealed that the chemical composition of the “shell” is dominated by Ag, but the “core” is dominated by the template, P(AM-co-MAA). It was also demonstrated that the surface morphology of the Ag-polymer composite microspheres is similar to that of their precursors and can be controlled to a certain extent by varying the composition of template copolymer, approaches, and amount of Ag₂CrO₄ deposited. This morphology transfer technique is also applicable for other silver salts-polymer composite microspheres. The same silver-polymer composite microspheres with very different morphology have also been prepared by utilizing this technique, but the different precursor microspheres, Ag₃PO₄-P(AM-co-MAA), were used. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Synthesis of P(MBA-co-MAA) microsphere-grafted PAMAM dendrimers and their application as supporters for gold nanoparticles

Poly(N,N′-methylenebisacrylamide-co-acrylic acid) microsphere-supported polyamidoamine (PAMAM) dendrimers up to third generation (G) were grown onto the surface as well as the gel-layer of P(MBA-co-MAA) microspheres by a divergent method. The P(MBA-co-MAA) supported PAMAM dendrimers were used as heterogeneous stabilizers for the gold nanoparticles by an in situ reduction of HAuCl₄ via the efficient coordination interaction between the amino groups of the supported PAMAM dendrimers and the gold atoms. The effects of the generations of the P(MBA-co-MAA) supported PAMAM dendrimer on the loadings and the catalytic activity of the heterogeneous Au nanoparticles were systematically investigated with the reduction of 4-nitrophenol to 4-aminophenol as a model reaction.     

Adsorption of protein on the surface of thermosensitive poly(methyl methacrylate) microspheres modified with the N-(2-hydroxypropyl)methacrylamide and 2-(methacryloyloxy)ethyl phosphorylcholine moieties

A series of microspheres composed of methyl methacrylate (MMA) and N-(2-hydroxypropyl)methacrylamide (HPMA), and/or 2-(methacryloyloxy)ethyl phosphorylcholine (MPC), i.e., binary copolymer microspheres [poly(HPMA-co-MMA)_KPS and poly(HPMA-co-MMA)_ABIP] and ternary ones [poly(HPMA/MPC-co-MMA)_KPS and poly(HPMA/MPC-co-MMA)_ABIP], were prepared by emulsifier-free emulsion copolymerization using potassium peroxodisulfate (KPS) or 2,2′-azobis[2-(imidazolin-2-yl)propane] dihydrochloride (ABIP) as initiators. The decrease in ζ-potential of the polymer microspheres is caused by the addition of the HPMA and/or MPC moieties. Equilibrium water content of poly(HPMA-co-MMA)_ABIP showed a remarkable swelling change with a change in response to temperature: the hydrated conformation at 28°C and the dehydrated one at above 40°C. The adsorption of protein on the polymer microspheres also changed in response to change in temperature. The ternary polymer microspheres effectively suppressed the adsorption both of Alb and Glo, less than binary ones. A series of polymer microspheres are expected to apply as a novel drug carrier with both thermosensitive and nonthrombogenic functions. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3349–3357, 1997     

Preparation of P(MBA‐co‐MAA)/Zr(OH)4/P(EGDMA‐co‐MAA)/TiO2 Tetra‐layer Hybrid Microspheres and the Corresponding ZrO2/TiO2 Double‐shelled Hollow Microspheres

Double‐shelled zirconia/titania (ZrO₂/TiO₂) hollow microspheres were prepared by the selective removal of the polymer components via the calcination of the corresponding tetra‐layer poly(N,N′‐methylenebisacryl amide‐co‐methacrylic acid) (P(MBA‐co‐MAA))/Zr(OH)₄/poly(ethyleneglycol dimethacrylate‐co‐methacrylic acid) (P(EGDMA‐co‐MAA))/TiO₂ hybrid microspheres. These tetra‐layer microspheres were synthesized by the combination of the distillation copolymerization of N,N(‐methylenebisacryl amide‐co‐methacrylic acid (MBA) or ethyleneglycol dimethacrylate (EGDMA) crosslinker and methacrylic acid (MAA) for the preparation of polymer core and third‐layer as well as the controlled sol‐gel hydrolysis of inorganic precursors for the construction of zirconium hydroxide (Zr(OH)₄) and titania (TiO₂) layers. The thicknesses of zirconia and titania shell‐layers were conveniently controlled via varying the feed of zirconium n‐butoxide (Zr(OBu)₄) and titanium tetrabutoxide (TBOT) during the sol‐gel hydrolysis, while the sizes of polymer layers were tuned through a multi‐stage distillation precipitation copolymerization. The structure and morphology of the resultant microspheres were characterized by transmission electron microscopy (TEM), X‐ray diffractometer (XRD), X‐ray photoelectronic spectroscopy (XPS), and thermogrametric analysis (TGA).     

Adsorption of poly(N-isopropylacrylamide-co-4-vinylpyridine) onto core-shell poly(styrene-co-methylacrylic acid) microspheres

Adsorption of the thermoresponsive copolymer of poly(N-isopropylacrylamide-co-4-vinylpyridine) (PNIPAM-co-P4VP) onto the core-shell microspheres of poly(styrene-co-methylacrylic acid) (PS-co-PMAA) is studied. The core-shell PS-co-PMAA microspheres are synthesized by one-stage soap-free polymerization in water. The copolymer of PNIPAM-co-P4VP is synthesized by free radical polymerization of N-isopropylacrylamide and 4-vinylpyridine in the mixture of DMF and water using K₂S₂O₈ as initiator. Adsorption of PNIPAM-co-P4VP onto the core-shell PS-co-PMAA microspheres results in formation of the composite microspheres of PS/PMAA-P4VP/PNIPAM. The driven force to adsorb the copolymer of P4VP-co-PNIPAM onto the core-shell PS-co-PMAA microspheres is ascribed to hydrogen-bonding and electrostatic affinity between the P4VP and PMAA segments. The resultant composite microspheres of PS/PMAA-P4VP/PNIPAM with surface chains of PNIPAM are thermoresponsive in water and show a cloud-point temperature at about 33 °C.     

Controlled Dispersion of Silver Nanoparticles into the Bulk of Thermosensitive Polymer Microspheres: Tunable Plasmonic Coupling by Temperature Detected by Surface Enhanced Raman Scattering

By in situ reduction of Ag⁺ ions pre‐dispersed inside thermosensitive microspheres of poly[(N‐isopropylacrylamide)‐co‐(methacrylic acid)] (P(NIPAM‐co‐MAA)), a 3D copolymer‐supported network of silver nanoparticles is created and extensively characterized by surface‐enhanced Raman scattering (SERS). The effective dispersion and the suitable density of the silver nanoparticles in the composite microspheres are demonstrated by the thermal‐induced SERS signal and its high reproducibility during thermocycling. When the temperature of the system increases above 32 °C, spatial separation of the silver nanoparticles decreases and the numbers of Ag nanoparticles and P(NIPAM‐co‐MAA) microspheres under illumination spot increase as a result of the shrinkage of the P(NIPAM‐co‐MAA) chains, leading to the ramp of the SERS effect. By means of the high reversibility of the thermosensitive phase transition of the P(NIPAM‐co‐MAA) microspheres, SERS activity of the silver nanoparticle network embedded in the microsphere can be well controlled by thermal‐induced variation of special separation.

     

PREPARATION OF POLYMER MICROSPHERES WITH PYRIDYL GROUP AND THEIR STABILIZED GOLD METALLIC COLLOIDS

Narrow disperse poly(ethyleneglycol dimethacrylate-co-4-vinylpyridine)(poly(EGDMA-co-4-VPy))microspheres were prepared by distillation-precipitation copolymerization of ethyleneglycol dimethacrylate(EGDMA)and 4-vinylpyridine (4-VPy)with 2,2'-azobisisobutyronitrile(AIBN)as initiator in neat acetonitrile.The polymer microspheres containing pyridyl group were then utilized as stabilizer for gold metallic colloids with the diameter around 7 nm,which were prepared by the in situ reduction of gold chloride trihydrate with sodium borohydride through the coordination of the pyridyl group on the gel layer and surface of the microsphere with the gold metallic nano-particles.The catalytic properties of the pyridyl- functionalized microsphere-stabilized gold metallic colloids and the behavior of the stabilized-catalyst for the recycling were investigated with reduction of 4-nitrophenol to 4-aminophenol as a model reaction.     

Synthesis and adsorption properties of gold nanoparticles within pores of surface‐functional porous polymer microspheres

Mesoporous polymer microspheres with gold (Au) nanoparticles inside their pores were prepared considering their surface functionality and porosity. The Au/polymer composite microspheres prepared were characterized by transmission electron microscope (TEM), X‐ray diffraction (XRD), and Brunauer–Emmett–Teller (BET) techniques. The results showed that the adsorption of Au nanoparticles could be increased by imparting the pore structure and surface‐functional groups into the supporting polymer microspheres (in this study, poly (ethylene glycol dimethacrylate‐co‐acrylonitrile) and poly (EGDMA‐co‐AN) system). Above all, from this study, it was established that the porosity of the polymer microspheres is the most important factor that determines the distribution and adsorption amount of face‐centered cubic (fcc) Au nanoparticles in the final products. Our study showed that the continuous adsorption of Au nanoparticles with the aid of the large surface area and surface interaction sites formed more favorably the Au/polymer composite microspheres. The BET measurements of Au/poly(EGDMA‐co‐AN) composite microspheres reveals that the adsorption of Au nanoparticles into the pores kept the pore structure intact and made it more porous. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5627–5635, 2004     

Selective detection and recovery of gold at tannin-immobilized non-conducting electrode

A tannin-immobilized glassy carbon electrode (TIGC) was prepared via electrochemical oxidation of the naturally occurring polyphenolic mimosa tannin, which generated a non-conducting polymeric film (NCPF) on the electrode surface. The fouling of the electrode surface by the electropolymerized film was evaluated by monitoring the electrode response of ferricyanide ions as a redox marker. The NCPF was permselective to HAuCl₄, and the electrochemical reduction of HAuCl₄ to metallic gold at the TIGC electrode was evaluated by recording the reduction current during cyclic voltammetry measurement. In the mixed electrolyte containing HAuCl₄ along with FeCl₃ and/or CuCl₂, the NCPF remained selective toward the electrochemical reduction of HAuCl₄ into the metallic state. The chemical reduction of HAuCl₄ into metallic gold was also observed when the NCPF was inserted into an acidic gold solution overnight. The adsorption capacity of Au(III) on tannin-immobilized carbon fiber was 29 ± 1.45 mg g⁻¹ at 60 °C. In the presence of excess Cu(II) and Fe(III), tannin-immobilized NCPF proved to be an excellent candidate for the selective detection and recovery of gold through both electrochemical and chemical processes.     

Growth mechanism of gold nanoparticles decorated on polystyrene spheres via self-regulated reduction

Uniform polystyrene (PS) microspheres prepared for deposition of metallic nanoparticles were synthesized using the surfactant-free emulsion polymerization based on styrene/potassium persulfate/water (St/KPS/H₂O) system. Owing to the presence of sulfate groups, the PS microspheres can be utilized to reduce gold nanoparticles without adding extra reducing agent into the mixture. The synthesis and characterization of metal-polystyrene nanocomposites are reported, and a possible reduction mechanism is proposed: by heating the aqueous solution in the presence of metal ions and PS, the sulfate chain end groups of the PS hydrolyzed and transformed to hydroxyl groups firstly. The hydroxyl groups function as a reducing agent, and carboxylic groups provide a site to adsorb the gold nuclei. The Au nanoparticles grow in size with the coalescence and dissolving of nuclei through the Ostwald ripening process. The PS microspheres and Au nanoparticles were characterized by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, transmission electron microscopy, X-ray power diffraction, and thermal gravimetric analysis.     

Fabrication of SiO2 hollow microsphere with urchin-like structure based on template from directed assembly of block copolymer

We report here a novel strategy for fabrication of SiO₂ hollow microspheres with urchin-like structure based on templates from directed assembly of block copolymer, poly(2-cinnamoyloxyethyl acrylate)-block-poly(acrylic acid-co-styrene) (PCEA-b-P(AA-co-Sty)). The structures of template from directed assembly of copolymers as well as that of as-obtained hollow SiO₂ microspheres were observed by a combination technique of optical microscope, scanning electron microscope, and transmission electron microscopy. It is shown that the hollow microspheres consist of aligned SiO₂ “spines” radially growing from the core which are induced a favorable growth by the structures of the template from directed assembly of PCEA-b-P(AA-co-Sty). The “spine” density of the hollow SiO₂ sphere can be tuned by controlling the structure of the copolymer with different hydrolysis degree of poly(tert-butyl-acrylate) to PAA, and the ultimate size of the resultant SiO₂ hollow sphere can be adjusted by solvent and temperature in the sol–gel process, etc.     

Preparation of polyvinylpyrrodione microspheres by dispersion polymerization

The preparation of polyvinylpyrrolidone (PVP) microspheres in ethyl acetate by dispersion polymerization with N-vinylpyrrolidone (NVP) as initial monomer, poly(N-vinylpyrrolidone-co-vinyl acetate) (P (NVP-co-VAc)) as dispersant, and 2, 2′-azobisisobutyronitrile(AIBN) as initiator is reported. The influences of monomer concentration, dispersant concentration and initiator concentration on the size of PVP microspheres as well as the monomer conversion were studied. The structure and properties of PVP microspheres were analyzed. The results show that the prepared PVP microspheres have a mean diameter of 3-4 μm. With an increase in NVP concentration, the size and the molecular weight of the PVP microspheres as well as the monomer conversion all increase. With increasing P(NVP-co-VAc) concentrations, the PVP molecular weight and monomer conversion both increase while the size of the microspheres becomes smaller. As the concentration of AIBN increases, the microsphere size and monomer conversion increase whereas the PVP molecular weight decreases. The PVP prepared by dispersion polymerization has a crystal structure, and its molecular weight is lower compared to that prepared by solution polymerization. __________ Translated from Acta Polymerica Sinica, 2007, 11 (in Chinese)     

Encapsulation of a Single Metal Nanoparticle with Tunable Size in a Monodisperse Polymer Microcapsule

A versatile approach to fabricate monodisperse poly[styrene‐co‐(divinyl benzene)] (PS‐co‐DVB) microcapsules that contain a single gold nanoparticle (AuNP) has been demonstrated. Using the PS‐co‐DVB microcapsule as a microreactor, aqueous HAuCl₄ and NaBH₄ solutions are subsequently infiltrated. The size of the resulting AuNP inside of the PS‐co‐DVB microcapsules is easily tunable by controlling the repeated infiltration cycles of aqueous HAuCl₄ and NaBH₄. PS‐co‐DVB microcapsules that contain a single silver and palladium nanoparticle are also obtained by following a similar protocol.

     

Role of dispersion stabilizer with hydroxy groups in preparation of monodisperse polylactide microspheres

Monodisperse poly(D ,L ‐lactide) (PDLLA) microspheres were prepared by dispersion polymerization of D ,L ‐lactide in xylene/heptane (1/2, v/v) with poly[(dodecyl methacrylate)‐co‐(2‐hydroxyethyl methacrylate)] (P(DMA‐co‐HEMA)) as a dispersion stabilizer. P(DMA‐co‐HEMA) contains hydroxy groups, which act as an initiation group for pseudoanionic dispersion polymerization. The best coefficient of variation (CV) values concerning particle diameter distribution and the particle diameter of obtained PDLLA microspheres were 3.7% and 5.3 μm, respectively. The particle diameter decreased with increasing concentration of P(DMA‐co‐HEMA) and HEMA maintained low CV (<10%) values. As a result, monodisperse PDLLA microspheres ranging from 1.3 to 5.3 μm were obtained. In addition, it was found that monodisperse PDLLA microspheres were obtained by sufficient capture of growing polymers and monomers in the particle growth stage. Therefore, the HEMA concentration in P(DMA‐co‐HEMA) strongly affecting the capturing capability is the most important factor. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5230–5240, 2009     

Streptavidin-modified magnetic poly(2-hydroxyethyl methacrylate-co-glycidyl methacrylate) microspheres for selective isolation of bacterial DNA

The dispersion copolymerization of 2-hydroxyethyl methacrylate (HEMA) with glycidyl methacrylate (GMA) in a toluene/2-methylpropan-1-ol mixture in the presence of Fe₃O₄ nanoparticles coated with oleic acid, produced monodisperse magnetic poly(2-hydroxyethyl methacrylate-co-glycidyl methacrylate) (P(HEMA-GMA)) microspheres. Oxirane groups of the microspheres were ammonolyzed and then functionalized with streptavidin using cyanuric chloride. The final product contained 0.67 mg of streptavidin per gram of wet magnetic P(HEMA-GMA) microspheres. The microspheres were characterized by elemental analysis, scanning electron microscopy, IR, UV–VIS and atomic absorption spectroscopy. The streptavidin-modified magnetic P(HEMA-GMA) microspheres were used for immobilization of biotinylated DNA and subsequent selective isolation of target DNA from complex samples using DNA/DNA hybridisation. Based on the highly selective recognition of streptavidin with a biotin-labeled DNA probe, DNA sensor was constructed for magnetic separation of DNA from real samples.     

Preparation and characterization of multiresponsive polymer composite microspheres with core–shell structure

Fe₃O₄/SiO₂/poly (N-isopropylacrylamide-co-N,N-dimethylaminoethyl methacrylate) [P(NIPAM-co-DMA)] multiresponsive composite microspheres with core–shell structure were synthesized by template precipitation polymerization. First, the magnetite nanoparticles were coated with silica and then modified with 3-(trimethoxysilyl)-propyl methacrylate (MPS). Subsequently, the Fe₃O₄/SiO₂ particles grafted with MPS were used to seed the precipitation copolymerization of NIPAM and DMA. The composite microspheres with core–shell structure were superparamagnetic, pH-sensitive, and thermoresponsive. The swelling ratio (D_{25 °C, pH = 3}/D_{50 °C, pH = 9})³ coupling of pH and temperature increased up to 21.2, which was much higher than that without comonomer DMA.     

Fe3O4/PEI/Au@CdSe/CdS多功能复合材料的制备与表征

以共沉淀法制备出Fe₃O₄纳米粒子,通过聚乙烯亚胺(PEI)修饰Fe₃O₄纳米粒子,再原位复合上Au纳米粒子,制得Fe₃O₄/PEI/Au纳米颗粒微球。再将Fe₃O₄/PEI/Au纳米颗粒与巯基乙酸修饰的量子点CdSe/CdS连接,成功制备了Fe₃O₄/PEI/Au@CdSe/CdS多功能复合微球。经过傅里叶变换红外光谱仪(FTIR)、荧光分光光度计、荧光显微镜、X射线衍射(XRD)、透射电子显微镜(TEM)及振动样品磁强计(VSM)的表征。结果表明:多功能复合微球的粒径在40 nm左右,具有超顺磁性,剩磁,矫顽力近似等于零,饱和磁化强度为28.83 A·m²·kg^-1,同时兼有优越的荧光性能和金纳米粒子的特性。     

Preparation of biodegradable microspheres by anionic dispersion polymerization with PLA copolymeric dispersion stabilizer

We prepared poly(d,l-lactide) (PLA) microspheres by anionic dispersion polymerization of d,l-lactide. The polymerization was carried out in xylene/heptane (1:2 in v/v) mixture solution at 368 K for 9 h, with poly(dodecyl methacrylate)-co-poly[α-methacryloxyethoxy-poly(l-lactide)] (PDMA-co-P(MA-PLLA)) synthesized in this study, as a dispersion stabilizer. The number-averaged diameter and diameter distribution (coefficient of variation) of obtained PLA microspheres ranged from 180 to 800 nm and 14–40%, respectively, depending on the preparation condition. Furthermore, the time courses of monomer conversion, particle diameter, and particle number were investigated to clarify the formation mechanism of microspheres with PDMA-co-P(MA-PLLA) as a dispersion stabilizer. From this experiment, we found that the aggregation of primary particles occurred in anionic dispersion polymerization, and the particle diameter of obtained PLA microspheres decreased with increasing PDMA-co-P(MA-PLLA) concentration. In conclusion, we clarified that PDMA-co-P(MA-PLLA) effectively contributed to the stability of primary particles.     

Fabrication of Hierarchical Fe3O4@SiO2@P(4VP‐DVB)@Au Nanostructures and Their Enhanced Catalytic Properties

Hierarchical Fe₃O₄@SiO₂@P(4VP‐DVB)@Au nanostructures were prepared in which the slightly cross‐linked, thin poly(4‐vinylpyridine‐co‐divinylbenzene) (P(4VP‐DVB)) shells were constructed onto Fe₃O₄@SiO₂ nanospheres, followed by in situ embedding of gold nanocrystals homogeneously into the P4VP chains. These slightly cross‐linked chains, easily swollen by the reactants, make the gold nanocrystals accessible to the reactants, and the thin shell (about 15 nm) reduces the diffusion distance of the reactants to the active gold nanocrystals (about 5 nm), thereby enhancing their catalytic activity and utility. At the same time, confinement of gold nanocrystals within the P4VP shells prevents their migration and coagulation during catalytic transformations. Hence the nanocomposites exhibit high activity (up to 4369.5 h^?1 of turnover frequency (TOF)) and controllable magnetic recyclability without any significant loss of gold species after ten runs of catalysis in the reduction of 4‐nitrophenol.