超支化有机硅基聚合物

超支化有机硅基聚合物(HBOSP)是一类新型功能性半有机半无机聚合物,在催化剂载体、陶瓷前驱体、发光材料和耐热材料等领域都有非常广阔的应用前景.本文概述了近10年来利用ABx、A2-Bx或A2-B'Bx-1以及Bf-ABx型单体制备新型结构HBOSP的进展,以及对这类聚合物的分子量及其分布和支化度调控的研究进展;着重总结了近年来针对该类聚合物的端基功能化改性及其应用情况,并在此基础上展望了该类聚合物的研究趋势.     

可紫外光固化的超支化聚硅氧烷合成及固化研究

同线型聚硅氧烷聚合物相比，超支化聚硅氧烷聚合物具有低粘度、高反应活性和良好的相容性等特点，其中以制备超支化的聚硅氧烷基硅氧烷和聚烷氧基硅氧烷为主．对于超支化聚硅氧烷主要是以ABx（X=2～6）（其中A为双键，B为硅氢键）型单体为原料，在氯铂酸或Pt／C的催化下，通过硅氢加成反应一步制备，最终聚合物的端基（B）为硅氢键，而双键则完全反应，此外也可通过含不同数目烷氧基硅烷的水解缩合制备超支化聚硅氧烷．     

新型功能性超支化聚酯的合成及表征

近年来 ,树枝状和超支化聚合物的研究受到了广泛重视 ,被视为 2 1世纪聚合物科学发展的重要方向[1] .这两种聚合物都有大量的端基 ,与相同分子量的线型聚合物相比 ,它们具有更低的粘度和更好的溶解性 .树枝状聚合物具有规整的结构 ,但合成困难 ;超支化聚合物的支化结构不完整 ,可以通过简单的一步聚合获得 ,因此 ,后者受到更广泛的重视 ,也最有可能实现工业化 [2 ,3] .通常 ,超支化聚合物是通过 ABx(x≥ 2 )型单体的缩聚合成的 ,通过改变超支化聚合物的组成、结构及对其端基进行功能修饰 ,可以制备多种具有特殊用途的新材料 ,在粘度改性剂…     

超支化聚(β-环糊精)的合成与表征

通过硅氢加成反应, 以ABx型功能化β-环糊精大单体为原料, 采用一步法合成出新型超支化聚(β-环糊精)高分子. ABx大单体由单取代对甲苯磺酰化β-CD依次与烯丙基胺、1,1,3,3-四甲基二硅氧烷(含氢双封头)及丙烯酰氯反应得到. 采用1H NMR, 13C NMR, 29Si NMR和飞行时间质谱对ABx大单体及其聚合物的结构进行了表征. 利用凝胶渗透色谱/多角度激光光散射(SEC/MALLS)联用仪得到了超支化聚(β-环糊精)的分子量、分子量分布及本体黏度.     

基于炔类单体的点击聚合制备超支化聚合物

超支化聚合物由于其独特的树枝状结构和物理化学性质,已经得到了广泛关注及应用.而基于炔类单体的点击聚合作为一类简单、高效的聚合反应已被广泛用于超支化聚合物的制备.本文对近5年利用叠氮-炔和巯基-炔点击聚合制备超支化聚合物的工作进行了简要综述.其中,Cu(I)催化的叠氮-炔点击聚合可制备1?4-立构规整的超支化聚三唑;Ru(II)催化的叠氮-炔点击聚合可制备1?5-立构规整的超支化聚三唑;活化的炔类单体和叠氮单体的无金属催化点击聚合可得到1?4-异构体含量高(高达91.7%)的超支化聚合物;而光引发?热引发及自发的巯基-炔点击聚合可制备含硫的超支化聚合物.此外,对所制备的超支化聚合物的功能和应用进行了简单介绍,最后还简单讨论了点击聚合制备超支化聚合物方面的可能发展方向.     

可光固化超支化聚硅氧基硅烷的合成与表征

自20世纪80年代末期Kim和Webster首次采用AB2型单体合成超支化聚合物以来，超支化聚合物以其新颖的结构、独特的性能和广泛的应用前景受到了科学界和工业界的广泛关注．其中超支化有机硅聚合物，尤其是硅氧基聚合物，由于具有良好的高低温稳定性、耐腐蚀性、耐候性等，以及硅氯、硅氢等末端基团易于功能化改性的特点，使其在功能性涂层材料、催化剂以及液晶材料等领域具有重要的应用价值．到目前为止，有关超支化聚硅氧基硅烷的研究主要集中在AB2型单体（x≥2，A和B分别为硅氢基团和乙烯基、烯丙基等不饱和基团）的制备以及硅氢加成产物的功能化改性方面．     

端丙烯酸酯基超支化聚(酯-胺)的结构分析及光固化

近年来 ,具有树枝状结构的超支化聚合物因其独特的物理化学性质而得到广泛关注[1,2 ] .超支化聚合物主要采用 3种途径合成 ,( 1 )ABn(n >2 )型及潜ABn 型单体的聚合 ;( 2 )由A2 与Bn 型单体直接聚合 ;( 3)先由特定的单体对原位形成ABn型中间体后再聚合 .其中后两种方法可直接采用商业化原料 ,因此更具有实用价值 .目前 ,基于途径 ( 2 )已合成出超支化聚酰胺[3 ] 、聚醚[4] 、聚酰亚胺[5] 和共轭聚合物[6] 等 ,但该途径容易生成凝胶化产物 ,通过控制反应物浓度、在凝胶点之前停止反应等 ,可得到溶解型超支化产物 .由于超支化聚合物具有低…     

长链超支化聚合物的合成研究进展

长链超支化聚合物(HyperMacs)凭借其含有大量的功能端基和可调控的链结构等优点已经引起国内外科研人员越来越广泛的关注。HyperMcs除了拥有超支化聚合物固有的低粘度、溶解性好、含有大量的功能性端基的特点外,同时拥有高剪切敏感性、熔体弹性、冲击强度和零剪切粘度,因而在药物载体、能量存储及传递和纳米催化剂等方面可能拥有更为广泛的应用。本文根据HyperMacs合成方法的不同,分别从迭代法和ABx线型大分子单体法两个主要方面对其研究进展进行了总结和评述,并在此基础上展望了该类聚合物的研究方向和发展趋势。     

超支化聚氨酯的合成及应用

超支化聚合物因其独特的结构和性能逐渐成为聚合物领域的研究热点之一,各种合成超支化聚合物的方法相继被报道。但对于超支化聚氨酯(HBPU)这一类聚合物,由于其官能团的特殊性,很难用传统的方法制得。本文总结了近十几年来制备HBPU的两类主要方法:一种为单单体法(SMM),包括光气法、叠氮化合物法、AA′ B′B2法、高选择性化学反应等;另一种为双单体法(DMM),包括扩链法,低聚物A2 B3法。另外简要介绍了HBPU在固体电解质、相变材料、油墨以及纳米粒子制备等领域的应用。     

超支化聚合反应的多尺度模拟

超支化聚合物具有与树枝状大分子相似的物理和化学性质,其具有合成简单、分子量分布宽等突出特点,超支化聚合物分子的结构形成取决于聚合反应过程,本文介绍了超支化聚合反应模拟研究的最新进展.首先介绍了八位置键涨落粗粒化格子模型在超支化聚合反应模拟中的应用,该方法考虑了聚合物分子空间位阻效应、分子内成环和反应点活性等影响因素,从而可以模拟不同类型的超支化聚合反应;为了定量描述单体和聚合物分子结构,研究者进一步发展了杂化多尺度超支化聚合反应模拟方法,该方法通过玻尔兹曼反演迭代方法获取单体和聚合物特异性粗粒化力场,然后通过粗粒化分子动力学方法结合反应性Monte Carlo方法对特异性超支化聚合反应进行定量模拟.多尺度聚合反应模拟不仅可以精确计算超支化聚合物分子量、多分散性指数和支化度等一般性聚合物参数,还可以获取分子成环率、超支化大分子构象等重要分子结构信息,在超支化聚合反应基础研究与预测方面具有重要应用价值.     

Control of polymer topology through transition-metal catalysis: synthesis of hyperbranched polymers by cobalt-mediated free radical polymerization

A novel approach was demonstrated for the synthesis of hyperbranched polymers by direct free radical polymerization of divinyl monomers controlled by a cobalt chain transfer catalyst (1). By controlling the competition between propagation and chain transfer with 1, the free radical polymerization of ethylene glycol dimethacrylate (3) afforded soluble hyperbranched polymers in one pot. The structure of the hyperbranched polymers was confirmed by (1)H and (13)C NMR. The molecular weight and intrinsic viscosity of the hyperbranched polymers were measured by matrix-assisted laser desorption ionization (MALDI) mass spectrometry and size exclusion chromatography (SEC) equipped with triple detectors. The intrinsic viscosities of the hyperbranched polymers are much lower than those of their linear analogues and do not show molecular weight dependence. The unique structure and properties of these hyperbranched polymers combined with the commercial availability of many divinyl monomers and the robustness of free radical polymerization make this new approach attractive for the preparation of new functional materials.     

Michael addition polymerizations of difunctional amines (AA′) and triacrylamides (B3)

Novel hyperbranched poly(amido amine)s containing tertiary amines on the backbones and acryl or secondary amines as the surface groups were successfully synthesized via the Michael addition polymerizations of a triacrylamide [1,3,5‐triacryloylhexahydro‐1,3,5‐triazine (TT)] and a difunctional amine [n‐butylamine (BA)] NMR techniques were used to clarify the structures of hyperbranched polymers and polymerization mechanism. The reactivity of the secondary amine formed in situ was much lower than that of the primary amines in BA. When the feed molar ratio was 1:1 TT/BA, the secondary amine formed in situ was almost kept out of the reaction before the BA (AA′) and TT (B₃) monomers were consumed, and this led to the formation of A′B₂ intermediates containing one secondary amine group and two acryl groups. The self‐polymerization of the A′B₂ intermediates produced hyperbranched polymers bearing acryl as surface groups. For the polymerization with the feed molar ratio of 1:2 TT/BA, A′₂B intermediates containing one acryl group and two secondary amine groups were accumulated until self‐polymerization started; the self‐polymerization of the intermediates formed hyperbranched polymers with secondary amines as their surface groups. Modifications of surface functional groups were studied to form new hyperbranched polymers. The hyperbranched poly(amido amine)s were amorphous. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6226–6242, 2006     

Novel hyperbranched polymers synthesized via A3 + B(B′) approach by radical addition‐coupling polymerization

In this study, a novel application of radical addition‐coupling polymerization (RACP) for synthesis of hyperbranched polymers is reported. By Cu/PMDETA‐mediated RACP of 2‐methyl‐2‐nitrosopropane with trimethylolpropane tris(2‐bromopropionate) or a bromo‐ended 3‐arm PS macromonomer, two types of hyperbranched polymers with high degree of polymerization are synthesized under mild conditions, respectively. The chemical structures of the hyperbranched polymers are carefully characterized. By selective degradations of the ester groups and weak bonds of NO? C in the polymers, high degree of alternative connection of the two monomers in the synthesized polymers have been identified. Based on the experimental results, mechanism of formation of the hyperbranched polymer is proposed, which includes formation of carbon radicals from the tribromo monomer through single electron transfer, its capture by 2‐methyl‐2‐nitrosopropane that results in nitroxide radical, and cross‐coupling reaction of the nitroxide radical with other carbon radicals. Hyperbranched polymer can be formed in a step‐growth mode after multiple steps of such reactions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 904–913     

三元非等活性自缩合乙烯基聚合体系的Z均回转半径

利用Monte Carlo模拟方法研究了由单体、引发单体和引发核组成的三元自缩合乙烯基聚合反应体系. 重点考察了两类活性基团反应活性的差异、引发单体分数、引发核的配比及活性基团数等因素对体系中无核和有核两类超支化高分子Z均回转半径的影响. 结果表明, 这些因素对超支化高分子的结构和尺度影响显著, 因而通过调节有关参数可以实现对超支化高分子结构和尺度的调控.     

Synthesis and characterization of hyperbranched amphiphilic block copolymers prepared via self‐condensing RAFT polymerization

Four families of hyperbranched amphiphilic block copolymers of styrene (Sty, less polar monomer) and 2‐vinylpyridine (2VPy, one of the two more polar monomers) or 4‐vinylpyridine (4VPy, the other polar monomer) were prepared via self‐condensing vinyl reversible addition‐fragmentation chain transfer polymerization (SCVP‐RAFT). Two families contained 4VPy as the more polar monomer, one of which possessing a Sty‐b‐4VPy architecture, and the other possessing the reverse block architecture. The other two families bore 2VPy as the more polar monomer and had either a 2VPy‐b‐Sty or a Sty‐b‐2VPy architecture. Characterization of the hyperbranched block copolymers in terms of their molecular weights and compositions indicated better control when the VPy monomers were polymerized first. Control over the molecular weights of the hyperbranched copolymers was also confirmed with the aminolysis of the dithioester moiety at the branching points to produce linear polymers with number‐average molecular weights slightly greater than the theoretically expected ones, due to recombination of the resulting thiol‐terminated linear polymers. The amphiphilicity of the hyperbranched copolymers led to their self‐assembly in selective solvents, which was probed using atomic force microscopy and dynamic light scattering, which indicated the formation of large spherical micelles of uniform diameter. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1310–1319     

One‐pot synthesis of hyperbranched glycopolymers by RAFT polymerization

Soluble hyperbranched glycopolymers were prepared by copolymerization of glycan monomers with reversible addition‐fragmentation chain transfer polymerization (RAFT) inimers in a simple one‐pot reaction. Two novel RAFT inimers, 2‐(methacryloyloxy)ethyl 4‐cyano‐4‐(phenylcarbonothioylthio)pentanoate (MAE‐CPP) and 2‐(3‐(benzylthiocarbonothioylthio)propanoyloxy)ethyl acrylate (BCP‐EA) were synthesized and used to prepare hyperbranched glycopolymers. Two types of galactose‐based saccharide monomers, 6‐O‐methacryloyl‐1,2:3,4‐di‐O‐isopropylidene‐D ‐galactopyranose (proGal‐M) and 6‐O‐(2′‐acrylamido‐2′‐methylpropanoate)‐1,2:3,4‐di‐O‐isopropylidene‐D ‐galactopyranose (proGal‐A), containing a methacrylate and an acrylamide group, respectively, were also synthesized and polymerized under the mediation of the MAE‐CPP and BCP‐EA inimers, respectively. In addition, hyperbranched poly(proGal‐M), linear poly(proGal‐A), and hyperbranched poly(proGal‐A) were generated and their polymerization kinetics were studied and compared. An unexpected difference was observed in the kinetics between the two monomers during polymerization: the relationship between polymerization rate and concentration of inimer was totally opposite in the two monomer–inimer systems. Branching analysis was conducted by using degree of branching (DB) as the measurement parameter. As expected, a higher DB occurred with increased inimer content. Furthermore, these polymers were readily deprotected by hydrolysis in trifluoroacetic acid solution resulting in water‐soluble polymers. The resulting branched glycopolymers have potential as biomimetics of polysaccharides. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

高支化聚合物的合成与表征

介绍了近年来在高分子化学领域内十分活跃的高支化聚合物研究的状况。指出了通过ＡＢｘ型单体的缩聚反应和Ａ＝Ｂ－Ｃ＾８型单体的自缩合乙烯都可获得高支化聚合物。目前用以表征高支化聚合物支化度和分子量的方法主要为核心共振法和凝胶渗透色谱法,在实际应用中都存在局限性。     

Chain-growth polymerization of azide–alkyne difunctional monomer: Synthesis of star polymer with linear polytriazole arms from a core

This article reports a chain-growth coupling polymerization of AB difunctional monomer via copper-catalyzed azide–alkyne cycloaddition (CuAAC) reaction for synthesis of star polymers. Unlike our previously reported CuAAC polymerization of AB _n (n ≥ 2) monomers that spontaneously demonstrated a chain-growth mechanism in synthesis of hyperbranched polymer, the homopolymerization of AB monomer showed a common but less desired step-growth mechanism as the triazole groups aligned in a linear chain could not effectively confine the Cu catalyst in the polymer species. In contrast, the use of polytriazole-based core molecules that contained multiple azido groups successfully switched the polymerization of AB monomers into chain-growth mechanism and produced 3-arm star polymers and multi-arm hyperstar polymers with linear increase of polymer molecular weight with conversion and narrow molecular weight distribution, for example, M_w/M_n ~ 1.05. When acid-degradable hyperbranched polymeric core was used, the obtained hyperstar polymers could be easily degraded under acidic environment, producing linear degraded arms with defined polydispersity. © 2019 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 84–90     

两亲性超支化聚合物的研究进展

两亲性超支化聚合物作为一种新型功能性材料.近年来引起了人们的广泛关注.两亲性超支化聚合物的合成丰要是利用不同亲水性的链段对超支化聚合物端基进行改性,或者首先在超支化聚合物末端产生活性位点,再利用超支化分f作为大分子引发剂引发烯类单体进行斤环聚合、原子转移自由基聚合等得到以超支化聚合物为核的两亲性超支化共聚物;这些分子由...     

Chain‐Growth Click Polymerization of AB2 Monomers for the Formation of Hyperbranched Polymers with Low Polydispersities in a One‐Pot Process

Hyperbranched polymers are important soft nanomaterials but robust synthetic methods with which the polymer structures can be easily controlled have rarely been reported. For the first time, we present a one‐pot one‐batch synthesis of polytriazole‐based hyperbranched polymers with both low polydispersity and a high degree of branching (DB) using a copper‐catalyzed azide–alkyne cycloaddition (CuAAC) polymerization. The use of a trifunctional AB₂ monomer that contains one alkyne and two azide groups ensures that all Cu catalysts are bound to polytriazole polymers at low monomer conversion. Subsequent CuAAC polymerization displayed the features of a “living” chain‐growth mechanism with a linear increase in molecular weight with conversion and clean chain extension for repeated monomer additions. Furthermore, the triazole group in a linear (L) monomer unit complexed Cu^I, which catalyzed a faster reaction of the second azide group to quickly convert the L unit into a dendritic unit, producing hyperbranched polymers with DB=0.83.