Determination of 6-mercaptopurine based on the fluorescence enhancement of Au nanoparticles

A novel method for the determination of 6-mercaptopurine (6MP) has been developed based on fluorescence enhancement of Au nanoparticles (AuNPs). The fluorescent AuNPs with mean diameter of ∼15 nm were synthesized in aqueous solution, exhibiting the stable maximum emission at 367 nm, under the excitation at wavelength of 264 nm. The AuNPs self-assembly with 6MP were characterized with transmission electron microscopy (TEM), ultraviolet-visible (UV-vis) absorption, fluorescence and surface-enhanced Raman scattering (SERS) spectroscopy. The results revealed that the surface attachment through versatile binding sites of S10, N3, N9 and N7 atoms in 6MP produced the interparticle coupling and formed aggregates of AuNPs. As a result, the fluorescence emission enhancement was significantly observed upon AuNPs self-assembly with 6MP. The fluorimetric determination under optimal conditions indicated that 6MP could be quantified in good linearity range of 6.35 × 10⁻⁸ to 3.05 × 10⁻⁷ M, with a low detection limit of 4.82 × 10⁻¹⁰ M. The relative standard deviation (n = 11) was 1.8% at 2.54 × 10⁻⁸ M 6MP concentration level. The proposed method was successfully applied for the determination of 6MP in spiked human urine. The probable fluorescence enhancement mechanism was also discussed there.     

A new approach for the detection of a nonfluorescent compound by CE-resonance Raman spectroscopy based on the sweeping-MEKC mode

A CE-resonance Raman spectroscopy (CE-RRS) method based on MEKC and sweeping-MEKC modes is described. A nonfluorescent compound, malachite green (MG), and a doubled Nd:YAG laser (532 nm, 300 mW) were selected as model compound and light source, respectively. In order to carry out a quantitative analysis of MG, a monochromator (effective bandwidth, 0.4 nm) was used to collect the specific Raman line at 1616 cm(-1) (N-phi and C-C stretch, corresponding to 582 nm when the wavelength of the exciting source was 532 nm). As a result, the LOD for MG was 10 ppm, based on the MEKC/RRS mode. This could be improved to 5 ppb when the sweeping-MEKC/RRS mode was applied. Furthermore, with the addition of nano-size silver colloids to the CE buffer the detection limits can be further improved, but the data obtained with surface-enhanced resonance Raman spectroscopy (SERRS) are less useful for quantitative purposes.     

A novel stacking method of repetitive large volume sample injection and sweeping MEKC for determination of androgenic steroids in urine

In this research, a novel stacking capillary electrophoresis method, repetitive large volume sample injection and sweeping MEKC (rLVSI-sweeping MEKC) were developed to analyze the presence of three androgenic steroids considered as sport doping drugs, testosterone (T), epitestosterone (E) and epitestosterone glucuronide (EG) in urine. This method provides better sensitivity enhancement than the traditional large volume sample stacking-sweeping strategies due to sensitivity enhancement by repetitive injections. This multiple sampling method enhances sensitivity of monitoring of urine samples by UV detection (254 nm). Firstly, the phosphate buffer was filled into an uncoated fused silica capillary and the samples were injected into the capillary at 10 psi for 20 s, and then stacked at −10 kV for 1 min using phosphate buffer containing SDS. The above injecting and stacking steps were repeated five times. Finally, separation was performed at −20 kV, using phosphate buffer containing methanol, SDS and (2-hydroxypropyl)-β-cyclodextrin. Method validation showed that calibration plots were linear (r ≧ 0.997) over a range of 5-200 ng mL⁻¹ for T, 20-200 ng mL⁻¹ for E and 0.5-500 ng mL⁻¹ for EG. The limits of detection were 1.0 ng mL⁻¹ for T, 5.0 ng mL⁻¹ for E and 200.0 pg mL⁻¹ for EG. When evaluating precision and accuracy, values of RSD and RE in intra-day (n = 3) and inter-day (n = 5) analysis were found to be less than 10.0%. Compared with the simple LVSS-sweeping, which is also a stacking strategy, this method further improves sensitivity up to 25 folds (∼2500 folds with MEKC without preconcentration). This method was applied to monitor 10 athletes’ urine, and did not detect any analyte. The novel stacking method was feasible for monitoring of doping by sportsmen.     

A quantitative method for determination of Co(II) based on the inner filter effect of reagents on the Raman scattering signals of water

It is known that Raman scattering signals are one of main interference sources leading up to determination errors in spectrofluorometry, and thus the signals can be easily detected with a common spectrofluorometer. In this contribution, we propose a quantitative method based on the inner filter effect (IFE) of reagents on the Raman scattering signals of solvent by taking the complexation of divalent cobalt ion with 4-[(5-chloro-2-pyridyl)azo]-1,3-diaminobenzene (5-Cl-PADAB) as a model system. By adjusting the excitation wavelength of the spectrofluorometer, we could easily detect the Raman scattering signals of water at 424 nm where the maximum absorption of 5-Cl-PADAB reagent is located. In a solution of 5-Cl-PADAB, the Raman scattering signals of water are decreased owing to the IFE of 5-Cl-PADAB. If Co(II), which could form the binary complex of Co(II)/5-Cl-PADAB and consumes the 5-Cl-PADAB reagent, is present in such a case for a given amount of 5-Cl-PADAB solution, recovered Raman scattering signals could be observed and measured with a spectrofluorometer. It was found that the intensity of the enhanced Raman scattering signals is proportional to the Co(II) concentration over the range from 2.0 × 10⁻⁷ mol L⁻¹ to 1.0 × 10⁻⁵ mol L⁻¹, and the detection limit could reach 1.2 × 10⁻⁷ mol L⁻¹. With that, Co(II) in samples could be detected with R.S.D. values lower than 2.6% and recoveries over the range of 97.2-104.7%.     

Kinetic spectrophotometric determination of Tween 80

A novel kinetic spectrophotometic method for the determination of Tween 80 based on its interaction with 5(p-dimethylaminobenzylidene)rhodanine (PDR) in alkaline media is reported. The effect of variable on the rate of interaction of Tween 80 and PDR was investigated in order to establish the optimum conditions. The interaction was monitored spectrophotometically and change in absorbance (ΔA) of PDR at 464 nm at times of 30 and 270 s was used as an analytical parameter. Tween 80 can be measured in the range of 2.5×10⁻⁵ to 1.25×10⁻³ M with detection limit of 1.5×10⁻⁵ M. The relative standard deviation for eight replicate determinations of 2×10⁻⁴ and 1×10⁻³ M of Tween 80 solution was 4.08 and 3.88%, respectively. This method was used to determine Tween 80 in biscuit and multivitamin syrup.     

Flow-injection fluorometric quantification of pyruvate using co-immobilized pyruvate decarboxylase and aldehyde dehydrogenase reactor: Application to measurement of acetate, citrate and l-lactate

A flow-injection system for the quantification of pyruvate based on the coupled reactions of pyruvate decarboxylase (PDC) and aldehyde dehydrogenase (AlDH) was conceived and optimized. A co-immobilized PDC and AlDH reactor was introduced into the flow line. Sample and reagent (NAD⁺) were injected into the flow line by an open sandwich method and the increase of NADH produced by the immobilized-enzyme reactor was monitored fluorometrically at 455 nm (excitation at 340 nm). Linear relationships between the responses and concentrations of pyruvate were observed in the ranges of 2.0 × 10⁻⁵ to 1.5 × 10⁻³ M at the flow rate of 1.0 ml min⁻¹ and 5.0 × 10⁻⁶ to 1.0 × 10⁻³ M at the flow rate of 0.5 ml min⁻¹. The relative standard deviation for 10 successive injections was 0.95% at the 1.0 mM level. This FIA system for pyruvate was applied to the measurement of acetate, citrate and l-lactate.     

Silver ion imprinted polymer nanobeads based on a aza-thioether crown containing a 1,10-phenanthroline subunit for solid phase extraction and for voltammetric and potentiometric silver sensors

A new nano-sized silver(I) ion-imprinted polymer (IIP) was prepared via precipitation copolymerization using ethyleneglycol dimethacrylate, as a cross-linking agent in the presence of Ag⁺ and an aza-thioether crown containing a 1,10-phenanthroline subunit as a highly selective complexing agent. The imprint silver(I) ion was removed from the polymeric matrix using a 1.0 M HNO₃ solution. The resulting powder material was characterized using IR spectroscopy and scanning electron microscopy. The SEM micrographs showed colloidal nanoparticles of about 52 nm and 75 nm in diameter and slightly irregular in shape for leached and unleached IIPs, respectively. The optimal pH for quantitative enrichment was 6.0 and maximum sorbent capacity of the prepared IIP for Ag⁺ was 18.08 μmol g⁻¹. The relative standard deviation and limit of detection (LOD = 3S_b/m) for flame atomic absorption spectrometric determination of silver(I) ion, after its selective extraction by the prepared IIP nanobeads, were evaluated as 2.42% and 2.2 × 10⁻⁸ M, respectively. The new Ag⁺-IIP was also applied as a suitable sensing element to the preparation of highly selective and sensitive voltammetric and potentiometric sensors for ultra trace detection of silver(I) ion in water samples, with limits of detection of 9.0 × 10⁻¹⁰ and 1.2 × 10⁻⁹ M, respectively.     

Ionic liquid-based miniature electrochemical sensors for the voltammetric determination of catecholamines

Screen-printed electrodes modified with carbon paste that consisted of graphite powder dispersed in ionic liquids (IL) were used for the electrochemical determination of dopamine, adrenaline and dobutamine in aqueous solutions by means of cyclic voltammetry. The IL plays a dual role in modifying compositions, acting both as a binder and chemical modifier (ion-exchanger); ion-exchange analyte pre-concentration increases analytical signal and improves the sensitivity. Calibration graphs are linear in concentration range 3.9 × 10⁻⁶ to 1.0 × 10⁻⁴ M (dopamine), 2.9 × 10⁻⁷ to 1.0 × 10⁻⁴ M (adrenaline) and 1.7 × 10⁻⁷ to 1.0 × 10⁻⁴ M (dobutamine); detection limits are (1.2 ± 0.1) × 10⁻⁶, (1.3 ± 0.1) × 10⁻⁷ and (5.3 ± 0.1) × 10⁻⁸ M, respectively. Using an additive of Co (III) tetrakis-(tert-butyl)-phthalocyanine leads to the increase of signal and lowering detection limit. Some practical advises concerning both the sensor design and selectivity of catecholamine determination are provided.     

11-Molybdobismuthophosphate—A new reagent for the determination of ascorbic acid in batch and sequential injection systems

The guanidinium salt of the new heteropolymolybdate 11-molybdobismuthophosphate Gua₆PBiMo₁₁O₄₀ (11-MBP) was synthesized, characterized and used as a reagent for batch spectrophotometric (SP) and sequential injection determination of ascorbic acid (AsA). When compared to other Keggin's heteropolyanions, the reduction of 11-MBP with AsA is both fast and maximal within a pH range of 1.6-2.0. The stoichiometry of the reaction was determined using molar ratio and continuous variation methods and was shown to be 1:1. The molar absorptivity of the reduced form of 11-MBP was 6.0 × 10³ L mol⁻¹ cm⁻¹ at 720 nm. The reaction is also specific for AsA. Only cysteine, hydroquinone and hydroxyacids were found to interfere with the reaction, while no interference was observed with the common reducing agents, including reducing sugars, catecholamines, nitrite, sulfite and iron(II) ions. Batch SP and sequential injection analysis (SIA) systems were developed for the determination of AsA, with calibration ranges of the SP methods at 2 × 10⁻⁶-8 × 10⁻⁵ M for a 10 mm cell and 5 × 10⁻⁷-3 × 10⁻⁵ M for a 50 mm cell and a limit of detection at 3 × 10⁻⁷ M. The linear range of the SIA method was 6 × 10⁻⁶-5 × 10⁻⁴ M, with a detection limit of 2 × 10⁻⁶ M and a sample throughput of 15 h⁻¹. The proposed methods were successfully used for the determination of AsA in both pharmaceuticals and fruit juices, and the results were consistent with those provided by the 2,6-dichlorophenolindophenol method.     

Stacking and separation of aspartic acid enantiomers under discontinuous system by capillary electrophoresis with light-emitting diode-induced fluorescence detection

We describe the stacking and separation of d- and l-aspartic acid (Asp) by capillary electrophoresis (CE) with light-emitting diode-induced fluorescence detection (LEDIF). In the presence of cyanide, d- and l-Asp were derivatized with naphthalene-2,3-dicarboxaldehyde (NDA) to form fluorescent derivatives prior to CE-LEDIF. The separation of NDA-derivatized d- and l-Asp was accomplished using a discontinuous system - buffer vials contained a solution of 0.6% poly(ethylene oxide) (PEO), 150 mM sodium dodecyl sulfate (SDS), and 60 mM hydroxypropyl-β-cyclodextrin (Hp-β-CD), while a capillary was filled with a solution of 150 mM SDS and 60 mM Hp-β-CD. The role of PEO, Hp-β-CD, and SDS is to act as a concentrating media, as a chiral selector, and as a pseudostationary phase, respectively. This discontinuous system could be employed for the stacking of 600 nL of NDA-derivatized d- and l-Asp without the loss of chiral resolution. The stacking mechanism is mainly based on the difference in viscosity between sample zone and PEO as well as SDS sweeping. The limits of detection at signal-to-noise of 3 for d- and l-Asp were down to 2.4 and 2.5 × 10⁻¹⁰ M, respectively. Compared to normal sample injection volume (25 nL), this stacking approach provided a 100- and 110-fold improvement in the sensitivity of d- and l-Asp, respectively. This method was further applied for determining d- and l-Asp in cerebrospinal fluid, soymilk, and beer.     

Raman sensitivity enhancement for aqueous absorbing sample using Teflon-AF 2400 liquid core optical fibre cell

The compatibility Teflon-AF 2400 liquid core optical fibre with resonance Raman spectroscopy (RRS-LCOF) was used to detect aqueous biomolecules. The maximum sensitivity enhancement factor for concentrations greater than the detection limit in a conventional cell was 10, and detection limit reduction of about 1000-fold have been achieved for the measurement of aqueous absorbing sample using Teflon-AF 2400 fibre Raman cell compared to the conventional cell. We were able to collect spectra of 2.5 × 10⁻⁹ and 2.5 × 10⁻¹⁰ M aqueous β-carotene using 16.2 mW of laser power and 10 s integration time. This volume of a 2.5 × 10⁻¹⁰ M aqueous solution corresponds to only 1.5 fmol or 830 fg of β-carotene. The results of this preliminary study indicate that RRS-LCOF has potential in bioanalytical and biomedical applications.     

Quantum dot-enhanced chemiluminescence detection for simultaneous determination of dopamine and epinephrine by capillary electrophoresis

A sensitive method based on quantum dot (QD)-enhanced capillary electrophoresis-chemiluminescence (CE-CL) detection was developed for simultaneous determination of dopamine (DA) and epinephrine (E). In this work, CdTe QD was added into the running buffer of CE to catalyze the post-column CL reaction between luminol and hydrogen peroxide, achieving higher CL emission. Negative peaks were produced due to the inhibitory effects on CL emission from DA and E eluted from the electrophoretic capillary. The decrease in CL intensity was proportional to the concentration of DA and E in the range of 8.0 × 10⁻⁸-5.0 × 10⁻⁶ M and 4.0 × 10⁻⁸-5.0 × 10⁻⁶ M, respectively. Detection limits for DA and E were 2.3 × 10⁻⁸ M and 9.3 × 10⁻⁹ M, respectively. Using this method, the levels of DA and E in human urine from healthy donors were determined.     

Study of the influence of silver nanoparticles on the second-order scattering and the fluorescence of the complexes of Tb(III) with quinolones and determination of the quinolones

Quinolones (Qs) can form the complex with Tb(III) ion, and the intramolecular energy transfer from Qs to Tb(III) takes place when excited. And thus the characteristic fluorescence of Tb(III) ion was enhanced and the maximum fluorescence peak locates at 545 nm. The second-order scattering (SOS) peak at 545 nm also appears for the Tb(III)-Qs complexes with the exciting wavelength of 274 nm. When the silver nanoparticles were added to the Tb(III)-Qs system, the luminescence intensity at 545 nm greatly increased. And the relative intensity is proportional to the amount of Qs. Based on this phenomenon, a novel method for determination of quinolones has been developed by using a common spectrofluorometer to measure the intensity of fluorescence and SOS. The luminescence intensity is greatly enhanced by silver nanoparticles in the pH range 5.5-6.2. The calibration graphs for pipemidic acid (PPA) and lomefloxacin (LMFX) are linear in the range 2.0 × 10⁻¹⁰ to 1.0 × 10⁻⁵ and 1.0 × 10⁻⁹ to 1.0 × 10⁻⁵ mol L⁻¹, respectively. The limits of detection are 4.7 × 10⁻¹¹ mol L⁻¹ for PPA and 1.1 × 10⁻¹⁰ mol L⁻¹ for LMFX. The method was applied satisfactorily to the determination of the two quinolones (Qs) in tablet, capsule, urine and serum samples. The experimental results showed that it is the certain size and certain concentration of silver nanoparticles that can greatly enhance the fluorescence -SOS intensity.     

Temporally resolved laser induced plasma diagnostics of single crystal silicon — Effects of ambient pressure

Laser-Induced Breakdown Spectroscopy of silicon was performed using a nanosecond pulsed frequency doubled Nd:YAG (532 nm) laser. The temporal evolution of the laser ablation plumes in air at atmospheric pressure and at an ambient pressure of ∼ 10^− 5 mbar is presented. Electron densities were determined from the Stark broadening of the Si (I) 288.16 nm emission line. Electron densities in the range of 6.91 × 10¹⁷ to 1.29 × 10¹⁹ cm^− 3 at atmospheric pressure and 1.68 × 10¹⁷ to 3.02 × 10¹⁹ cm^− 3 under vacuum were observed. Electron excitation temperatures were obtained from the line to continuum ratios and yielded temperatures in the range 7600–18,200 K at atmospheric pressure, and 8020–18,200 K under vacuum. The plasma morphology is also characterized with respect to time in both pressure regimes.     

Sequential fluorometric quantification of γ-aminobutyrate and l-glutamate using a single line flow-injection system with immobilized-enzyme reactors

A single line flow-injection system with immobilized-enzyme reactors is proposed for the sequential quantification of γ-aminobutyrate (GABA) and l-glutamate. A co-immobilized l-glutamate oxidase and catalase reactor and an immobilized GABase reactor were introduced into the flow line in series. Sample and reagent were injected into the flow line using an open sandwich method. GABA was selectively detected by GABase when α-ketoglutarate at a high concentration and NADP⁺ were injected as the reagents with a sample. When GABA at a high concentration and NADP⁺ were injected as the reagents with a sample, l-glutamate only was determined by the series of enzymatic reactions. NADPH produced by the immobilized-enzyme reactors was monitored fluorometrically at 455 nm (excitation at 340 nm). Linear relationships between the responses and concentrations of GABA or l-glutamate were observed in the ranges of 5.0 × 10⁻⁶-5.0 × 10⁻⁴ M and 1.0 × 10⁻⁵-5.0 × 10⁻⁴ M, respectively. The relative standard deviations for ten successive injections were less than 2% at the 0.5 mM level. This analytical method was applied to the sequential quantification of GABA and l-glutamate that were produced and consumed, respectively, by lactic acid bacteria, and the results showed good agreement with those obtained using liquid chromatography.     

Potentiometric stripping analysis of methyl and ethyl parathion employing carbon nanoparticles and halloysite nanoclay modified carbon paste electrode

Carbon nanoparticles (CNPs) and halloysite nanoclay (HNC) modified carbon paste electrode (HNC–CNP–CPE) was developed for the determination of methyl parathion (MP) and ethyl parathion (EP). The electrochemical behavior of these molecules was investigated employing cyclic voltammetry (CV), chronocoulometry (CC), electrochemical impedance spectroscopy (EIS) and potentiometric stripping analysis (PSA). After optimization of analytical conditions employing this electrode at pH 5.0 in acetate buffer (0.1 M), the peak currents were found to vary linearly with its concentration in the range of 1.55 × 10⁻⁹ to 3.67 × 10⁻⁶ M and 1.21 × 10⁻⁹ to 4.92 × 10⁻⁶ M for MP and EP, respectively. The detection limits (S/N = 3) of 4.70 × 10⁻¹⁰ M and 3.67 × 10⁻¹⁰ M were obtained for MP and EP, respectively, using PSA. The prepared modified electrode showed several advantages such as simple preparation method, high sensitivity, very low detection limits and excellent reproducibility. The proposed method was employed for the determination of MP and EP in fruits, vegetables, water and soil samples.     

Spectrophotometric determination of trace ionic and non-ionic surfactants based on a collection on a membrane filter as the ion associate of the surfactant with Erythrosine B

The spectrophotometric method for the determination of trace surfactants with Erythrosine B (EB) based on the aqueous reaction and the collection on a membrane filter by filtration was studied. Cationic surfactants (CS⁺), such as a quaternary ammonium ion, and polyoxyethylene non-ionic surfactants (NS) in the presence of potassium ion, containing a long-chain alkyl group associate with EB buffered at pH 5.5. CS⁺ associates with anionic surfactants (AS⁻). For the determination of CS⁺, four methods were employed: the collection of the ion associate of CS⁺ with EB on a mixed cellulose ester (MCE) or PTFE membrane filter, the collection of the ion associate of CS⁺ with AS⁻ on a PTFE membrane filter followed by the ion exchange of AS⁻ with EB, and the first collection of CS⁺ followed by the second collection of EB on a PTFE membrane filter. For the determination of AS⁻, the collection of the ion associate of AS⁻ with CS⁺ on a PTFE membrane filter followed by the ion exchange of AS⁻ with EB was done. For the determination of NS, the ion associate of NS with EB was collected on a MCE membrane filter. The MCE membrane filter with the analyte was dissolved in methyl cellosolve. The analyte on the PTFE membrane filter was eluted with ethanol. The CS⁺ up to 5×10⁻⁷ M can be determined by the absorbance at 542 nm of the methyl cellosolve solution or the absorbance at 535 nm of the ethanol solution. The AS⁻ up to 5×10⁻⁷ M can be determined by the absorbance at 536 nm of the ethanol solution. The NS up to 2.53×10⁻⁶ M can be determined by the absorbance at 537 nm of the methyl cellosolve solution. This is the sensitive method for the determination of 10⁻⁸ to 10⁻⁷ M order of ionic surfactants and 10⁻⁷ to 10⁻⁶ M order of NS without toxic organic solvents.     

Uric acid determination using uricase and the autotransducer molecular absorption properties of peroxidase

Uric acid (UA) is determined using the UV-vis molecular absorption properties of peroxidase (HRP). The method as a whole involves UA oxidation in the presence of uricase (UOx), giving H₂O_2. The H₂O₂ then reacts with HRP forming the compound I species which returns to its initial form by reaction with UA and intramolecular reduction. The molecular absorption changes of HRP at 420 nm during the reaction enable the UA to be determined. A mathematical model relating the analytical signal to UA, UOx and HRP has been developed and experimentally validated. The possibility of carrying out both enzymatic reactions sequentially or simultaneously is discussed, the latter option producing better analytical performances. The method permits UA determination in the range 1.5 × 10⁻⁶-4.0 × 10⁻⁵ M, with an R.S.D. of about 3% (n = 5, 1.5 × 10⁻⁶ M UA). It has been applied to analyte determination in synthetic serum samples.     

Synchronous fluorescence determination of urinary 1-hydroxypyrene, β-naphthol and 9-hydroxyphenanthrene based on the sensitizing effect of β-cyclodextrin

A novel method for the simultaneous determination of 1-hydroxypyrene (1-OHP), β-naphthol (β-NAP) and 9-hydroxyphenanthrene (9-OHPe) in human urine has been established by using synchronous fluorescence spectrometry. It was based on the fact that synchronous fluorescence spectrometry can resolve the broad-band overlapping of conventional fluorescence spectra, which arise from their similar molecular structures. Only one single scan is needed for quantitative determination of three compounds simultaneously when Δλ = 15 nm is chosen. The signals detected at these three wavelengths, 369.6, 330.0 and 358.0 nm, vary linearly when the concentration of 1-OHP, β-NAP and 9-OHPe is in the range of 2.16 × 10⁻⁸-1.50 × 10⁻⁵ mol L⁻¹, 1.20 × 10⁻⁷-1.10 × 10⁻⁵ mol L⁻¹ and 1.07 × 10⁻⁷-3.50 × 10⁻⁵ mol L⁻¹, respectively. The correlation coefficients for the standard calibration graphs were 0.994, 0.999 and 0.997 (n = 7) for 1-OHP, β-NAP and 9-OHPe, respectively. The limits of detection (LOD) for 1-OHP, β-NAP and 9-OHPe were 6.47 × 10⁻⁹ mol L⁻¹, 3.60 × 10⁻⁸ mol L⁻¹ and 3.02 × 10⁻⁸ mol L⁻¹with relative standard deviations (R.S.D.) of 4.70-6.40%, 2.80-4.20%, 3.10-4.90% (n = 6), respectively. The method described here had been applied to determine traces of 1-OHP, β-NAP and 9-OHPe in human urine, and the obtained results were in good agreement with those obtained by the HPLC method. In addition, the interaction modes between β-cyclodextrin (β-CD) and 1-OHP, β-NAP or 9-OHPe, as well as the mechanism of the fluorescence enhancement were also discussed.     

Synthesis and analytical application of a novel tetradentate N(2)O(2) Schiff base as a chromogenic reagent for determination of nickel in some natural food samples

A novel sensitive chromogenic reagent, N,N′-bis(3-methylsalicylidene)-ortho-phenylene diamine (MSOPD), has been synthesized and used in the spectrophotometric determination of nickel. At pH 8, MSOPD can react with nickel ion at room temperature to form a 1:1 complex. The apparent molar absorptivity is 9.5 × 10⁴ l mol⁻¹ cm⁻¹ at 430 nm. Beer's low is obeyed over the range 0-1.0 × 10⁻⁵ M of nickel with a detection limit of 1.36 × 10⁻⁸ M. The relative standard deviation for measurement of 3.41 × 10⁻⁶ M nickel is 1.3% (n = 10). The method has successfully been applied to determination of trace amounts of nickel in some natural food samples.