pH effects on the complexation, miscibility and radiation-induced crosslinking in poly(acrylic acid)-poly(vinyl alcohol) blends

The effect of pH on the complexation of poly(acrylic acid) with poly(vinyl alcohol) in aqueous solution, the miscibility of these polymers in the solid state and the possibility for crosslinking the blends using gamma radiation has been studied. It is demonstrated that the complexation ability of poly(vinyl alcohol) with respect to poly(acrylic acid) is relatively low in comparison with some other synthetic non-ionic polymers. The precipitation of interpolymer complexes was observed below the critical pH of complexation (pH(crit1)), which characterizes the transition between a compact hydrophobic polycomplex and an extended hydrophilic interpolymer associate. Films prepared by casting from aqueous solutions at different pH values exhibited a transition from miscibility to immiscibility at a certain critical pH, pH(crit2), above which hydrogen bonding is prevented. It is shown here that gamma radiation crosslinking of solid blends is efficient and only results in the formation of hydrogel films for blends prepared between pH(crit1) and pH(crit2). The yield of the gel fraction and the swelling properties of the films depended on the absorbed radiation dose and the polymer ratio. [Diagram: see text] SEM image of an equimolar PAA-PVA blend cast from a pH 4.6 solution.     

Hydrogen‐Bonded Complexes and Blends of Poly(acrylic acid) and Methylcellulose: Nanoparticles and Mucoadhesive Films for Ocular Delivery of Riboflavin

Poly(acrylic acid) (PAA) and methylcellulose (MC) are able to form hydrogen‐bonded interpolymer complexes (IPCs) in aqueous solutions. In this study, the complexation between PAA and MC is explored in dilute aqueous solutions under acidic conditions. The formation of stable nanoparticles is established, whose size and colloidal stability are greatly dependent on solution pH and polymers ratio in the mixture. Poly(acrylic acid) and methylcellulose are also used to prepare polymeric films by casting from aqueous solutions. It is established that uniform films can be prepared by casting from polymer mixture solutions at pH 3.4–4.5. At lower pHs (pH < 3.0) the films have inhomogeneous morphology resulting from strong interpolymer complexation and precipitation of polycomplexes, whereas at higher pHs (pH 8.3) the polymers form fully immiscible blends because of the lack of interpolymer hydrogen‐bonding. The PAA/MC films cast at pH 4 are shown to be non‐irritant to mucosal surfaces. These films provide a platform for ocular formulation of riboflavin, a drug used for corneal cross‐linking in the treatment of keratoconus. An in vitro release of riboflavin as well as an in vivo retention of the films on corneal surfaces can be controlled by adjusting PAA/MC ratio in the formulations.     

Interpolymer complex between poly(ethylene oxide) and poly(carboxylic acid)

An interpolymer complex was prepared by mixing aqueous solutions of poly(ethylene oxide) (PEO) and of a poly(carboxylic acid), i.e., poly(acrylic acid)(PAA), poly(methacrylic acid)(PMAA), or styrene-maleic acid copolymer(PSMA). The complexation mechanism was discussed on the basis of results of such experimental methods as viscosity, potentiometric titration, and turbidimetry. The hydrogen bond is primarily involved in these complexations, but the influence of hydrophobic interaction on complexation can not be ignored. If the degree of dissociation α of carboxylic acid or the degree of polymerization P_n of PEO was perceptibly changed, a stable complex was obtained at about α 0.1 or P_n (PEO) = 40 for PMAA, 200 for PAA. This fact indicates that more than a definite number of binding sites are necessary for a stable interpolymer complex to be formed and that cooperative interaction among active sites plays an important role in complex formation.     

Interpolymer complexes of poly(acrylic acid) with poly(2-hydroxyethyl acrylate) in aqueous solutions

Complexes formed from poly(acrylic acid) and poly(2-hydroxyethyl acrylate) were studied in aqueous solutions by viscometric, turbidimetric, FTIR spectroscopic, and thermogravimetric analysis methods. The formation of interpolymer complexes stabilized by hydrogen bonds was observed. It was found that the compositions of these interpolymer complexes are strongly dependent on the concentration of polymers, the order of mixing the solutions, and the pH. It was demonstrated that the complexation ability of poly(2-hydroxyethyl acrylate) is relatively low compared to other known nonionic water-soluble polymers. However, it can be significantly increased via hydrophobic modification of the poly(acrylic acid) using cetyl pyridinium bromide.     

Complexation between poly(N,N-diethylacrylamide) and poly(acrylic acid) in aqueous solution

The complexation between poly(N,N-diethylacrylamide) (PDEA) and poly(acrylic acid) (PAA) in aqueous solution was studied by viscometric, potentiometric, and fluorescence techniques. It was found that an interpolymer complex formed between the two polymers through hydrogen bonding interactions with the stoichiometry of r=0.6 (r is unit molar ratio of PAA/PDEA), and the complex formation show the dependence on pH values. The phase behaviour studies showed that the lower critical solution temperature of the PDEA-PAA aqueous solution gradually increased with the increasing of r from 0.01 to 0.15, until a soluble system in the whole temperature region was obtained, which remained in the range of r=0.15-0.3. At higher PAA concentrations, when r is above 0.3, the system appeared phase separation, and almost no temperature dependence was observed. Based on these conclusion and structure characteristics of PDEA and PAA, a model containing only short sequences of monomer residues was proposed for the structure of PDEA-PAA complex.     

pH-effects in the complex formation of polymers I. Interaction of poly(acrylic acid) with poly(acrylamide)

The effects of polymer concentration, molecular weight of poly(acrylic acid) (PAA), addition of sodium, potassium, ammonium and copper (II) chlorides on the complex formation ability of the system PAA-poly(acrylamide) (PAAM) have been studied in aqueous solutions. The critical pH values of the complexation were determined in different conditions. The complex formation ability of PAAM is compared with other non-ionic polymers. It was shown that an increase in polymers concentration, molecular weight of PAA and ionic strength favours the complexation and shifts the critical pH values to the higher pH region. An addition of CuCl₂ to the mixture of two polymers enhances the complexation drastically due to the formation of triple complexes.     

Highly ion conductive poly(ethylene oxide)-based solid polymer electrolytes from hydrogen bonding layer-by-layer assembly

We report the development of a solid polymer electrolyte film from hydrogen bonding layer-by-layer (LBL) assembly that outperforms previously reported LBL assembled films and approaches battery integration capability. Films were fabricated by alternating deposition of poly(ethylene oxide) (PEO) and poly(acrylic acid) (PAA) layers from aqueous solutions. Film quality benefits from increasing PEO molecular weight even into the 10(6) range due to the intrinsically low PEO/PAA cross-link density. Assembly is disrupted at pH near the PAA ionization onset, and a potential mechanism for modulating PEO:PAA ratio within assembled films by manipulating pH is discussed. Ionic conductivity of 5 x 10(-5) S/cm is achievable after short exposure to 100% relative humidity (RH) for plasticization. Adding free ions by exposing PEO/ PAA films to lithium salt solutions enhanced conductivity to greater than 10(-5) S/cm at only 52% RH and tentatively greater than 10(-4) S/cm at 100% RH. The excellent stability of PEO/PAA films even when exposed to 1.0 M salt solutions led to an exploration of LBL assembly with added electrolyte present in the adsorption step. Fortuitously, the modulation of PEO/PAA assembly by ionic strength is analogous to that of electrostatic LBL assembly and can be attributed to electrolyte interactions with PEO and PAA. Dry ionic conductivity was enhanced in films assembled in the presence of salt as compared to films that were merely exposed to salt after assembly, implying different morphologies. These results reveal clear directions for the evolution of these promising solid polymer electrolytes into elements appropriate for electrochemical power storage and generation applications.     

Photophysical investigations of interpolymer interactions in solutions of a pyrene substituted poly(acrylic acid), poly(vinyl amine), poly(1-aminoacrylic acid), and poly(1-acetylaminoacrylic acid)

Photophysical properties of the pyrene chromophore covalently bound to poly(acrylic acid) were used to investigate the interactions of a pyrene substituted poly(acrylic acid) (1) with poly(vinyl amine hydrochloride) (PVAm), poly(1-aminoacrylic acid) (PDA), and poly(1-acetylaminoacrylic acid) (PADA) in aqueous solutions. A number of photophysical parameters were obtained from fluorescence emission and excitation spectra, the deconvolution of decay curves for pyrene monomer, and excited state complex fluorescence and the quenching of pyrene monomer fluorescence by nitromethane in polymer solutions. These photophysical parameters were considered to reflect the inter- and intrapolymer interactions in solutions of 1 , PVAm, PDA, and PADA. The formation of interpolymer complexes between 1 and PVAm was noticed at low (< 4) as well as high (> 8) values, whereas PDA and 1 formed interpolymer complexes at low pH only. No interpolymer complex formation was detected in solutions of 1 and PADA under low or high pH conditions. The structures of interpolymer complexes formed between 1 and PVAm under low and high pH conditions were found to be determined by the conformation of 1 . There were significant differences in the interpolymer interactions of 1 and PDA in comparison to those of 1 and PVAm; in particular, the fluorescence from the excited state complex was enhanced in solutions of 1 and PVAm but quenched in solutions of 1 and PDA. The investigations of terpolymer solutions of 1 , PVAm, and PADA indicated that the nature of interpolymer complexes formed in terpolymer solutions was determined by Coulombic interactions of the amino and carboxylic group containing polymers.     

Specific features of nonstoichiometric interpolymer complexes of poly(acrylic acid) and poly(ethylene glycol) as protectors of copper nanoparticles in aqueous sols

Advantages of interpolymer complexes for use as amphiphilic protectors of nanoparticles during the formation and stabilization of sols are considered. The effects of the ratio of poly(acrylic acid) and poly(ethylene glycol) and the molecular mass of poly(ethylene glycol) on the mean size and size distribution of copper nanoparticles in sols formed via the reduction of divalent copper ions in mixed aqueous solutions of these polymers are investigated. It is shown that sols of metal nanoparticles with small sizes and narrow size distributions are formed even when poly(ethylene glycols) with chain lengths below the “critical” chain length and a small PEG-to-PAA base-molar ratio are used. This is evidence for efficient protection of the formed copper nanoparticles by the interpolymer complex PEG-PAA under conditions of its instability and for self-organization of oligomeric PEG chains in complex macromolecular shields of nanoparticles.     

Characterization of poly(carboxylic acid)/poly(ethylene oxide) blends formed through hydrogen bonding by spectroscopic and calorimetric analyses

The solid state of the complex between poly(acrylic acid) (PAA) and poly(ethylene oxide) (PEO), and that between poly(methacrylic acid) (PMAA) and PEO formed via hydrogen-bonding was studied by differential-scanning calorimetric (DSC) and by Fourier-transform infrared (FT–IR) spectroscopic measurements. Melting temperature T_m and the degree of the crystallinity X_c of PEO in the systems PAA (or PMAA)/PEO blends obtained from aqueous or dimethyl sulfoxide (DMSO) medium were measured in various unit mol % of PEO ([PEO]100/{[PAA(or PMAA)] + [PEO]}) where [ ] is the unit mole concentration. It was found that 50 unit mol % of PEO is a critical composition, which gives new evidence for the 1 : 1 complex formation between PAA (or PMAA) and PEO. From the FT–IR spectroscopic analysis in conjunction with DSC measurements we also found that the effects of solvent and of hydrophobic interaction (due to the α-methyl group of PMAA) are the important factors controlling the complexation in the solution and solid systems. These factors also affect the crystallization behavior and the microstructure of the PAA (or PMAA)/PEO blend in solid state.     

Interpolymer complexes of copolymers of vinyl ether of diethylene glycol with poly(acrylic acid)

 The complex formation reactions of poly(vinyl ether of diethylene glycol) as well as vinyl ether of diethylene glycol–vinyl butyl ether copolymers with poly(acrylic acid) have been studied in aqueous and alcohol solutions. The formation of interpolymer complexes which were stabilized by hydrogen bonds was shown. The effects of molecular weight of poly(acrylic acid) and the nature of the nonionic polymer on the composition and stability of interpolymer complexes were clarified. The critical pH values of complexation were determined for different systems with various molecular weights and hydrophobic–hydrophilic balances. The stability of the interpolymer complexes formed in aqueous and alcohol solutions with respect to dimethylformamide addition was evaluated. The role of hydrophobic interactions and the presence of active groups on stability of the interpolymer complexes is discussed. Received: 23 July 2001 Accepted: 27 September 2001     

Deliberately designed processes to physically tether the carboxyl groups of poly(pentacosadiynoic acid) to a poly(vinyl alcohol) glassy matrix to make poly(pentacosadiynoic acid) thermochromically reversible in the matrix

In this article, we demonstrate that by tethering carboxyl groups of poly(10,12-pentacosadiynoic acid) (PDA) to a poly(vinyl alcohol) (PVA) matrix, PDA, which is irreversible in its pure form, becomes reversible in the thermochromism. The tethering is realized by simple but deliberately designed processes: (1) Disperse the commercially available monomer 10,12-pentacosadiynoic acid (DA) nanocrystals in a PVA aqueous solution by the "NCCM" method invented in our laboratory. (2) Anneal and dry the mixture solution at a temperature higher than the melting point of pure DA crystal. (3) Polymerize the as-annealed DA/PVA blend films by UV irradiation. After the polymerization, PDA/PVA films with completely reversible thermochromism are obtained. The reversible PDA/PVA films can be easily dissolved in water, leading to water-dispersible nanoaggregates with the reversibility. Blends of PDA with other water-soluble polymers such as poly(ethylene oxide) (PEO), poly(acrylic acid) (PAA) and poly(allyamine) (PAM), were prepared respectively, by the same processes and under the same conditions. It is found that all these nanocomposites are irreversible or partially reversible in the thermochromism; either the relatively low glassy transition temperature of the polymer matrix (in the case of PEO) or the partial ionization nature of the polymer (in the cases of PAA and PAM) is responsible for the irreversibility or the partial reversibility.     

Novel biodegradable poly(butylene succinate)/poly(ethylene oxide) blend film with compositional and spherulite‐size gradients

Biodegradable poly(butylene succinate) (PBS)/poly(ethylene oxide) (PEO) polymer blend film with compositional gradient in the film thickness direction was prepared using a method of interdiffusion across the interface between the PBS and PEO layers at a temperature above the melting points of both the component polymers. The miscibility between PBS and PEO was confirmed by observation of the glass transition temperature by differential scanning calorimetry. The compositional gradient structure of PBS/PEO was characterized by microscopic mapping measurement of Fourier transform infrared spectra and dynamic mechanical thermal analysis. Furthermore, a new method for confirming the crystalline/crystalline compositional gradient structure through observing the crystallization behavior by POM (polarized optical microscopy) was put forward. A continuous gradient of the spherulite size along the film thickness direction was succeessfully generated in the PBS/PEO blend film. The compositional gradient blend was found to have significantly improved physical properties that cannot be realized for pure PBS, pure PEO, and even their homogeneous miscible blend system. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 368–377, 2005     

Fluorescence and viscometry study of complexation of poly(acrylic acid) with poly(acrylamide) and hydrolysed poly(acrylamide)

Interpolymer complexation of poly(acrylic acid) with poly(acrylamide) and hydrolysed poly(acrylamide) was studied by fluorescence spectroscopy and viscometry in dilute aqueous solutions. Changes in chain conformation and flexibility due to the interpolymer association are reflected in the intramolecular excimer fluorescence of pyrene groups covalently attached to the polymer chain. Both poly(acrylamide) and hydrolysed poly(acrylamide) form stable complexes with poly(acrylic acid) at low pH. The molecular weight of poly(acrylic acid) and solution properties such as pH and ionic strength were found to influence the stability and the structure of the complexes. In addition, the polymer solutions mixing time showed an effect on the mean stoichiometry of the complex. The intrinsic viscosity of the solutions of mixed polymers at low pH suggested a compact polymer structure for the complex.     

Interaction between poly(N-vinylpyrrolidone) and poly(acrylic acid)s: Influence of hydrogen and cupric ions on the adduct formation

Interpolymer adduct formation between poly(N-vinylpyrrolidone) (PVP) and poly(methacrylic acid) (PMAA) is mainly due to hydrogen bonding. It is found that the interpolymer adduct formation is enhanced in the presence of Cu(II). A simple turbidity measurement making use of a spectrophotofluorometer is described for the study of the interpolymer adduct formation. Enhanced adduct formation in the presence of Cu(II) is described by the empirical relation d[PAd]/D[PVP] = k × 10^4α[Cu(II)]^α, where PAd represents the interpolymer adduct and α and k are constants. Similar results have been obtained in the case of interpolymer adduct formation between poly(acrylic acid) (PAA) and PVP. In the above expression α signifies the influence of chelation on Cu(II)–PAA/PMAA–PVP-type complex formation and k is the extent of PVP–PAA/PMAA interaction. The enhancement of adduct formation in the presence of Cu(II) is more in PAA than in PMAA. Turbidity and viscosity measurements further indicate that the influence of Cu(II) on interpolymer adduct formation between PVP and PMAA or PAA is more in the case of PAA than PMAA, as PAA is a better chelating ligand. But the extent of adduct formation is more in the case of PMAA in the absence of Cu(II) ions due to hydrophobic interactions exerted by methyl groups.     

Studies on interpolymer self-organisation behaviour of protoporphyrin IX bound poly(carboxylic acid)s with complimentary polymers by means of fluorescence techniques

Covalently bound protoporphyrin IX was used as a fluorophore to investigate the interpolymer complex formation between the poly(carboxylic acid)s, PMAA/PAA and poly(N-vinyl pyrrolidone), PVP, poly(ethylene oxide), PEO or poly(ethylene glycol), PEG. Absorption and emission spectral properties of protoporphyrin IX bound to PAA, PMAA and PVP have been studied. Protoporphyrin IX in poly(MAA-co-PPIX) was found to be present in the dimer or higher aggregated form at low pH due to the environmental restriction imposed by the polymer whereas in the case of poly(AA-co-PPIX) and poly(VP-co-PPIX), PPIX exists in monomeric form. The fluorescence intensity and lifetime of PPIX bound to poly(carboxylic acid)s increase on complexation through hydrogen bonding with PVP, PEO and PEG due to the displacement of water molecules in the vicinity of the PPIX. Poly(MAA-co-PPIX) shows longer fluorescence lifetime due to the more compact interpolymer complexation as compared to poly(AA-co-PPIX) due to the enhanced hydrophobicity of PMAA. Poly(VP-co-PPIX) shows a decrease in the fluorescence lifetime on complexation with PMAA or PAA due to the hydrophilic and microgel like environment of the fluorophore bound to PVP. The contrasting behaviour of the same polymer adduct with respect to the site of the fluorophore is interpreted to be due to the solvent structure which determines the environment of the fluorophore.     

Complexation of poly(acrylic acid) and poly(ethylene oxide) investigated by enhanced Rayleigh scattering method

The method of enhanced Rayleigh scattering spectroscopy (ERS) was developed to investigate the complexation of poly(acrylic acid) (PAA) and poly(ethylene oxide) (PEO) in semidilute polymer solutions. Based on the Ornstein‐Zernike equation, the relationship between macromolecular static correlation length and ERS intensity was presented. Moreover, the ERS spectra were calculated by the moving window two‐dimensional (MW2D) correlation spectroscopy to get detailed information of the polymer complexation. The results indicated that the ERS spectroscopy characteristics of the polymer mixtures have similar trend, and the ERS intensity promptly increases as the macromolecular chains contract. The increase of ERS intensity showed that the degree of complexation between PAA and PEO increases when the pH value decreases. The complexation results from the collapse of macromolecular chains, which is induced by the PAA chains contracting and the enhanced association between PAA and PEO chains because of the hydrogen bond formation. In addition, the association resulting from the complexation of PAA and PEO in solution was demonstrated by the MW2D correlation spectroscopy. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1847–1852, 2010     

Unusual phase behavior in mixtures of poly(ethylene oxide) and ethyl alcohol

Poly(ethylene oxide) (PEO), soluble in both aqueous and organic solvents, is one of the most intriguing polymers. PEO solution properties have been extensively studied for decades; however, many of the studies have focused on specific properties, such as clustering, of PEO in aqueous solutions, and the behavior of PEO in organic solvents has not been adequately explored. The results presented here demonstrate that PEO crystallizes into a lamellar structure in ethyl alcohol after the mixture is quenched to room temperature from a temperature above the crystal melting point. Above the melting temperature, PEO completely dissolves in ethyl alcohol, and the mixture exhibits regular polymer solution thermodynamic behavior with an upper critical solution temperature (UCST) phase diagram. Remarkably, the UCST phase boundary is significantly below the melting temperature, and this indicates that the system undergoes a crystallization process before the phase separation can occur upon cooling and, therefore, possesses an unusual phase transition. The phase transition from the crystalline state to the miscible solution state is reversible upon heating or cooling and can be induced by the addition of a small amount of water. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 557–564, 2006     

Miscible blends of poly(ethylene oxide) with brush copolymers of poly(vinyl alcohol)‐graft‐poly(l‐lactide)

Even though poly(ethylene oxide) (PEO) is immiscible with both poly(l ‐lactide) (PLLA) and poly(vinyl alcohol) (PVA), this article shows a working route to obtain miscible blends based on these polymers. The miscibility of these polymers has been analyzed using the solubility parameter approach to choose the proper ratios of the constituents of the blend. Then, PVA has been grafted with l ‐lactide (LLA) through ring‐opening polymerization to obtain a poly(vinyl alcohol)‐graft‐poly(l ‐lactide) (PVA‐g‐PLLA) brush copolymer with 82 mol % LLA according to ¹H and ¹³C NMR spectroscopies. PEO has been blended with the PVA‐g‐PLLA brush copolymer and the miscibility of the system has been analyzed by DSC, FTIR, OM, and SEM. The particular architecture of the blends results in DSC traces lacking clearly distinguishable glass transitions that have been explained considering self‐concentration effects (Lodge and McLeish) and the associated concentration fluctuations. Fortunately, the FTIR analysis is conclusive regarding the miscibility and the specific interactions in these systems. Melting point depression analysis suggests that interactions of intermediate strength and PLOM and SEM reveal homogeneous morphologies for the PEO/PVA‐g‐PLLA blends. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1217–1226     

聚甲基丙烯酸甲酯与聚醋酸乙烯酯共混的红外光谱研究

用红外光谱(FTIR)研究了聚甲基丙烯酸甲酯(PMMA)与聚醋酸乙烯酯(PVAc)共混体系相容性,在160℃以上共混体系发生相分离;分相体系与非分相体系的FTIR谱明显不同;共混体系的FTIR谱不能从两统组分红外光谱简单加和得到;结果表明大分子构象发生了变化,PMMA/PVAc体系相容可能是大分子构象熵变所致。