Development of a certified reference material for cachaça: an effective material for quality assurance

Cachaça is the typical and genuine denomination for the sugar cane beverage produced in Brazil. It has an alcoholic content between 38 and 48 % by volume, at 20 °C, and is obtained from the distillation of fermented sugar cane juice with the possible addition of up to 6 g/L of sugar, expressed by sucrose. This paper aims to outline the approach taken for the certification of the mass fraction of individual alcohols and their associated uncertainties in a cachaça certified reference material (CRM) produced by the Organic Analysis Laboratory of the Chemical Metrology Division of Inmetro. The requirements of ISO Guide 31, ISO Guide 34 and ISO Guide 35 were followed for the certification. This included the assessment of the degree of homogeneity of the material, the short-term stability study to determine the transport conditions, the long-term stability study to establish the shelf life and storage conditions of the CRM and the characterization process. The certified values were determined by two analytical techniques: gas chromatography coupled to mass spectrometry and gas chromatography with flame ionization detection. In order to support the routine testing of cachaça, in helping analytical laboratories validate and standardize their methods, the certified reference material (CRM 02.1/10.003b) was developed and certified for the mass fractions of methanol (9.18 mg/100 g ± 0.82 mg/100 g), 2-butanol (4.15 mg/100 g ± 0.40 mg/100 g), 1-butanol (1.30 mg/100 g ± 0.18 mg/100 g), isobutanol (24.0 mg/100 g ± 1.0 mg/100 g) and 1-propanol (29.4 mg/100 g ± 1.3 mg/100 g) in a spiked cachaça.     

Can auditing save us from a quality disaster?

Auditing of clinical laboratories is a recognized component of quality assurance practice. National regulatory standards, such as the U.S. Clinical Laboratory Improvement Amendments (CLIA), and international voluntary standards, such as those promulgated by the International Organization for Standardization (ISO), are used in the auditing. Professional organizations have long recognized the benefit of on-site, peer review. However, recent events in the U.S. question the validity of current auditing practices. To be effective, auditing must be part of a continuous quality improvement system and a key component of laboratory leadership.

One-year’s experience of a ‘repeat analysis’ quality programme for blood gas analysers

The aim of this study was to determine the value of a quality assurance (QA) programme based on the repeat analysis principle, where a sample is analysed at one site, and sent to another site for repeat analysis and the comparison of the two sets of values. Once each day a routine blood gas sample, collected from a patient in the Intensive Therapy Unit (ITU) of the hospital, was analysed by the ITU nurse on the ITU blood gas analyser. The air bubble was expelled and the sample sealed and sent to the biochemistry laboratory immediately. The sample was re-analysed in the biochemistry laboratory. This programme was continued for a year. The biochemistry laboratory results (gold standard) were compared with the ITU results and rule breaches were notified to ITU immediately after the repeat analysis. All results were graphed and linear regressions and correlation coefficients calculated. The correlation coefficients ranged from r ²=0.9317 for pH to r ²=0.4381 for pO². All parameters except pO₂ and Na⁺ gave satisfactory correlations. The Na⁺ results should be adjusted by inserting a slope and intercept. It is suspected that improvement in the pO₂ would be possible if the time between ITU and biochemistry analyses could be reduced from its current levels.Presented at the 8th Conference on Quality in the Spotlight, 17–18 March 2003, Antwerp, Belgium     

Assessors’ attitudes toward and experiences of national quality standards: a qualitative study in Iran

To establish a national accreditation system for medical laboratories, Iran has set national standards based on the international standard ISO 15189. Central to the accreditation process are the technical assessors. Their attitude in this regard and their experiences should be identified. This study aims to explore assessors’ attitudes toward national laboratory accreditation and their experiences of assessment process in order to identify current gaps and suggest required interventions to solve them. A qualitative study using an open-ended questionnaire was employed. A total of 150 assessors working in the General Directorate of Laboratory Affairs participated in the study. While almost all Iranian laboratory accreditation assessors were generally supportive about the necessity of laboratory accreditation and cited benefits of this process, they pointed to improvement areas including developing assessor selection and appraisal criteria, continuous training, taking into consideration the heterogeneity of laboratories throughout the country, participation of professional associations and adopting measures to increase laboratories’ involvement.     

The definition of primary method of measurement (PMM) of the ’highest metrological quality’: a challenge in understanding and communication

Problems with understanding, explaining and communication of the present definition of primary method of measurement are described and amendments put forward for discussion. The conclusion is drawn that in many cases more attention should be given to the measurement result and its uncertainty statement, rather than to a method. Some cases are discussed where methods might have a fundamental characteristic that other methods do not have, a condition for the epitheton ’primary’. Received: 23 December 2000 Accepted: 13 November 2000     

Further evidences of the quality of double-hybrid energy functionals for π-conjugated systems

Despite numerous interesting efforts along decades to improve the accuracy of density functionals with broad applicability, such as B3LYP, there are still large sets of molecular systems where improvements are badly needed. We select π-conjugated systems as an example of the latter due to the subtle interplay between some physical effects affecting possibly most of the calculations: self-interaction or delocalization error, medium-range correlation signatures, dispersive-like weak interactions, and static correlation effects. We further assess a recently proposed modification of the B2-PLYP double-hybrid functional, called B2π-PLYP, that is expected to yield substantial progress for this kind of systems. Generally speaking, when compared with other more popular and older density functionals, double hybrids behave particularly accurate for π-conjugated systems without suffering the large errors that are common in former yet conventional methods.     

The quality of QSAR models: problems and solutions†

Assessment of the quality of goodness-of-fit and the confidence in predictivity (prediction power) are the main terms used to define the statistical quality of QSAR models. Three parts of this assessment can be defined as:

(1)?Measure of goodness-of-fit.

(2)?Validation of model stability.

(3)?Predictivity analysis.

Currently there are no mandatory requirements for the validation methods to be used and rules for the quantitative confidence estimates. To compare the statistical quality of QSAR models it is necessary to have an overall statistical quality index which will depend on the goodness-of-fit, validation and predictivity results together. To do so it is necessary to define the set of mandatory parameters for all three parts of assessment listed above and develop the approach for overall quality estimates based on these parameters. It is also necessary to include into the overall index the penalty mechanism for parameter absence. The goal of the present study is to analyse parameters for all three parts of the QSAR model statistical quality assessment and investigate the flexible weighting approach for the overall statistical quality index development. Due the different statistical parameters traditionally used for assessment of goodness-of-fit it is necessary to create the mechanism, which allows flexible set of parameters to be used for the overall statistical quality index. Only after approval by scientific community and regulatory boards the final set of mandatory parameters can be selected.     

Synthesis of a Pair of Derivatives of N-Methylpyrrole Polyamide

A pair of derivatives of tetrameric N-methylpyrrole polyamide were synthesized in order to develop a new method for the study of interaction of the polyamide derivatives with DNA. Indole acetic acid and nicotinic acid were introduced to the polyamide in the synthesized compound, which showed an expected red shift in the UV spectrum. These compounds may function as a potential tool in the detection of the polyamide binding to DNA.     

Molecular recognition of a self-assembled monolayer of a polydithiocarbamate derivative of β-cyclodextrin on silver

The synthesis and molecular recognition properties of a new sulfur containing β-cyclodextrin (β-CD) derivative chemisorbed on a silver surface are described. Hepta-6-amino-6-deoxy-β-CD was allowed to react with CS₂ in the presence of ammonia to give a mixture of partially substituted dithiocarbamate derivatives with an average degree of substitution of 4.5. A modified silver electrode with this derivative is capable of discriminating between the three positional isomers of nitrobenzoate ion and nitrophenol, as determined by cyclic voltammetry. Only the meta- and para-isomers give a signal corresponding to the reduction of the nitro group. This is attributed to the different orientations of the nitro group with respect to the silver surface after inclusion in the CD cavity. Experiments in the presence of cyclohexanol showed a decrease in signal intensity of the meta- and para-isomers which is associated with the competitive complexation of this guest, suggesting that the electroactive probe is complexed to the cavity.     

The quality of pH measurements 100 years after its definition

Analytical chemistry is a scientific discipline based on the search of qualitative and quantitative information embodied in unknown samples which are representative of targeted systems. A. Lavoisier measured masses, S. Arrhenius discovered ions, namely hydrogen ions, S. Sørensen introduced pH and the chemical community has been dealing abundantly with them, first in the frame of classical analysis and later by means of instrumental methods of analysis responsible for large amount of data. Although statistical treatment of measurement results became part of the procedures, it took a few decades of thinking and globalization of the economy to realize that more was needed for the sake of evidence of quality; and this was found in the bases of the science of measurement and on the metrological approach. At the dawn of the twenty-first century, the most measured chemical parameter, pH, set the example of such hierarchical targeting of measurement results fit for a certain purpose, which is worth noticing particularly because 100 years have elapsed since its first definition and initial recommendation of the measurement procedure.     

Does the chromatomembrane cell improve the quality of environmental analysis?

With the intention of combining partition chromatography and membrane techniques, we succeeded in developing the chromatomembrane cell which has proved to be reliable as an extraction and preconcentration manifold in flow injection analysis. With this technique, two immiscible phases can be induced to flow independently through a block of biporous (macro and micro) PTFE in order to promote analyte exchange. Consequently, the application of chromatomembrane cells in environmental analysis resolves all problems of sample pretreatment simply and effectively whenever a preconcentration step by gas/liquid or liquid/liquid solvent extraction is included. The link-up with analyzers (AAS, UV–Vis photometry, GC, IC, HPLC, voltammetry, ion selective electrodes, etc.) makes possible computer aided automization for environmental monitoring.     

Development of a novel quality by design–enabled stability-indicating HPLC method and its validation for the quantification of nirmatrelvir in bulk and pharmaceutical dosage forms

A systematic and novel quality by design–enabled, rapid, simple, and economic stability–indicating HPLC method for quantifying nirmatrelvir (NMT) was successfully developed and validated. An analytical target profile (ATP) was established, and critical analytical attributes (CAAs) were allocated to meet the ATP requirements. The method used chromatographic separation using a Purosphere column with a 4.6 mm inner diameter × 250 mm (2.5 μm). The analysis occurred at 50°C with a flow rate of 1.2 mL/min and detection at 220 nm. A 10 μL sample was injected, and the mobile phase consisted of two components: mobile phase A, containing 0.1% formic acid in water (20%), and mobile phase B, containing 0.1% formic acid in acetonitrile (80%). The diluent was prepared by mixing acetonitrile and water at a 90:10 v/v ratio. The retention time for the analyte was determined to be 2.78 min. Accuracy exceeded 99%, and the correlation coefficient was greater than 0.999. The validated HPLC method was characterized as precise, accurate, and robust. Significantly, NMT was found to be susceptible to alkaline, acidic, and peroxide conditions during forced degradation testing. The stability-indicating method developed effectively separated the degradation products formed during stress testing, underlining its effectiveness in stability testing and offering accuracy, reliability, and sensitivity in determining NMT.     

Combined effect of γ-irradiation and bacterial-fermented dextrose on microbiological quality of refrigerated pork sausages

The objective of this study was to evaluate the effect of a concentrated fermented dextrose (FD), a natural antimicrobial product, combined with low dose γ-irradiation (1.5 kGy) on the microbiological quality of fresh pork sausages. Fresh pork sausages containing the FD (0.25%, 0.5% and 0.75%) were prepared in a meat pilot plant and were irradiated using a UC-15A irradiator equipped with a ⁶⁰Cobalt source. The γ-irradiation treatment alone was able to reduce the initial psychrophilic and mesophilic bacteria by more than 2 log CFU/g and kept the lactobacillus population under the detection limit (100 CFU/g). Results also showed that the FD alone was able to extend the shelf life of the sausages from 5 days up to 13 days. At day 13, the FD or irradiation alone showed 2 log CFU/g less mesophilic bacteria than the control. After combining FD and irradiation another reduction of the microbial count of 1 log CFU/g was observed. When combining the irradiation treatment with the FD results it showed a reduced growth rate of the psychrophilic and mesophilic bacteria compared to both treatments alone. This study demonstrated that FD with low dose gamma irradiation act in synergy to reduce the multiplication of the total bacterial flora in fresh sausages.     

Simulation of a flow of a “Sedate” reaction mass in a screw reactor with a thin wall layer

A transition to a flow virtually non-gradient in a screw reactors of heavy sedate liquid with thin wall layer is considered. The graphs of the differential response functions of the known models based on the ideal gas law for structures of flows (ideal mixture, ideal displacement, laminar and turbulent flows) in comparison with the response function of the sedate reaction mass were presented. The flow structure corresponds to the regime of the ideal displacement in the screw reactor at a treatment of the sedate reaction mass when air, water or other thin liquid are fed as lubricant in the wall layer.     

The Synthesis of a Series of Phosphoryl Coumarins

Different hydroxy substituted coumarins were successfully phosphorylated with diisopropylphophite （DIPPH） by the Atherton-Todd reaction in 76-89% yields. Moreover, the reaction activities of different hydroxys of the coumarins in the Atherton-Todd reaction were studied.     

Synthesis of a Novel Type of Glycophosphate Mimics

A series of novel type of glycophosphate mimics are synthesized by Todd reaction and their structure were determined on the basis of NMR,ESI-MS.     

Synthesis of a new series of anti-rhinovirus compounds

The synthesis of a series of 3,6-dichloropyridazine derivatives was described.In vitro experiment,all compounds exhibited ananti-rhinovirus activity,and one of the compounds 6g showed the comparable activity as our lead compound pirodavir.     

The cuticle of the cactusCereus peruvianus as a source of a homo-α-d-galacturonan

The waxy pecto-cellulosic cuticle of cladodes of the columnar cactusCereus peruvianus (19% of the whole phytobiomass; dry wt) is a source of an α-d-polygalacturonic or pectic acid (35–40% yield, on a dry wt based on the wax-free pectocellulose layer). Warm EDTA/oxalate or room temperature strong acid/alkali cycles are efficient for pectic acid extraction, since divalent cation (mainly Ca²⁺) is a barrier to be removed within the native and compact architecture of the cuticle. Despite some molecular dispersion arising from the application of strong mineral acid in the first extraction step, the pectic material appears to be quite homogeneous and, on acid or enzymatic analyses, was shown to contain onlyd-galacturonic acid as its monomer.Cereus cuticle pectate (sodium salt) tends to gel above a concentration of 1%, a useful property that can be more easily obtained by the inclusion of sucrose, light addition of calcium salt, and/or mild acidification.     

Harmonized internal quality aspects of a multi-residue method for determination of forty-six semivolatile compounds in water by stir-bar-sorptive extraction–thermal desorption gas chromatography–mass spectrometry

Three main aspects of internal quality—internal method validation, internal quality control (IQC), and sample result uncertainty—have been established for a multi-residue method for determination of 46 organic micropollutants (pesticides and polycyclic aromatic hydrocarbons) in water by stir-bar-sorptive extraction (SBSE) and thermal desorption (TD) coupled to capillary gas chromatography–mass spectrometry (GC–MS). From data obtained with increasing time, the process mean and standard deviation were used to harmonize the internal quality statistics. The relationship between these statistics and the hydrophobicity of the compounds was evaluated.