Kinetics and mechanisms of the ozone/bromite and ozone/chlorite reactions

Ozone reactions with XO(2)(-) (X = Cl or Br) are studied by stopped-flow spectroscopy under pseudo-first-order conditions with excess XO(2)(-). The O(3)/XO(2)(-) reactions are first-order in [O(3)] and [XO(2)(-)], with rate constants k(1)(Cl) = 8.2(4) x 10(6) M(-1) s(-1) and k(1)(Br) = 8.9(3) x 10(4) M(-1) s(-1) at 25.0 degrees C and mu = 1.0 M. The proposed rate-determining step is an electron transfer from XO(2)(-) to O(3) to form XO(2) and O(3)(-). Subsequent rapid reactions of O(3)(-) with general acids produce O(2) and OH. The OH radical reacts rapidly with XO(2)(-) to form a second XO(2) and OH(-). In the O(3)/ClO(2)(-) reaction, ClO(2) and ClO(3)(-) are the final products due to competition between the OH/ClO(2)(-) reaction to form ClO(2) and the OH/ClO(2) reaction to form ClO(3)(-). Unlike ClO(2), BrO(2) is not a stable product due to its rapid disproportionation to form BrO(2)(-) and BrO(3)(-). However, kinetic spectra show that small but observable concentrations of BrO(2) form within the dead time of the stopped-flow instrument. Bromine dioxide is a transitory intermediate, and its observed rate of decay is equal to half the rate of the O(3)/BrO(2)(-) reaction. Ion chromatographic analysis shows that O(3) and BrO(2)(-) react in a 1/1 ratio to form BrO(3)(-) as the final product. Variation of k(1)(X) values with temperature gives Delta H(++)(Cl) = 29(2) kJ mol(-1), DeltaS(++)(Cl) = -14.6(7) J mol(-1) K(-1), Delta H(++)(Br) = 54.9(8) kJ mol(-1), and Delta S(++)(Br) = 34(3) J mol(-1) K(-1). The positive Delta S(++)(Br) value is attributed to the loss of coordinated H(2)O from BrO(2)(-) upon formation of an [O(3)BrO(2)(-)](++) activated complex.     

Kinetics and mechanisms of bromine chloride reactions with bromite and chlorite ions

Chloride ion catalyzes the reactions of HOBr with bromite and chlorite ions in phosphate buffer (p[H(+)] 5 to 7). Bromine chloride is generated in situ in small equilibrium concentrations by the addition of excess Cl(-) to HOBr. In the BrCl/ClO(2)(-) reaction, where ClO(2)(-) is in excess, a first-order rate of formation of ClO(2) is observed that depends on the HOBr concentration. The rate dependencies on ClO(2)(-), Cl(-), H(+), and buffer concentrations are determined. In the BrCl/BrO(2)(-) reaction where BrCl is in pre-equilibrium with the excess species, HOBr, the loss of absorbance due to BrO(2)(-) is followed. The dependencies on Cl(-), HOBr, H(+), and HPO(4)(2)(-) concentrations are determined for the BrCl/BrO(2)(-) reaction. In the proposed mechanisms, the BrCl/ClO(2)(-) and BrCl/BrO(2)(-) reactions proceed by Br(+) transfer to form steady-state levels of BrOClO and BrOBrO, respectively. The rate constant for the BrCl/ClO(2)(-) reaction [k(Cl)(2)]is 5.2 x 10(6) M(-1) s(-1) and for the BrCl/BrO(2)(-) reaction [k(Br)(2)]is 1.9 x 10(5) M(-1) s(-1). In the BrCl/ClO(2)(-) case, BrOClO reacts with ClO(2)(-) to form two ClO(2) radicals and Br(-). However, the hydrolysis of BrOBrO in the BrCl/BrO(2)(-) reaction leads to the formation of BrO(3)(-) and Br(-).     

Kinetics and mechanisms of the reactions of hypochlorous acid,chlorine, and chlorine monoxide with bromite ion

The reaction between BrO2(-) and excess HOCl (p[H+] 6-7, 25.0 degrees C) proceeds through several pathways. The primary path is a multistep oxidation of HOCl by BrO(2)(-) to form ClO(3)(-) and HOBr (85% of the initial 0.15 mM BrO(2)(-)). Another pathway produces ClO(2) and HOBr (8%), and a third pathway produces BrO(3)(-) and Cl(-) (7%). With excess HOCl concentrations, Cl(2)O also is a reactive species. In the proposed mechanism, HOCl and Cl(2)O react with BrO(2)(-) to form steady-state species, HOClOBrO(-) and ClOClOBrO(-). Acid facilitates the conversion of HOClOBrO(-) and ClOClOBrO(-) to HOBrOClO(-). These reactions require a chainlike connectivity of the intermediates with alternating halogen-oxygen bonding (i.e. HOBrOClO(-)) as opposed to Y-shaped intermediates with a direct halogen-halogen bond (i.e. HOBrCl(O)O(-)). The HOBrOClO(-) species dissociates into HOBr and ClO(2)(-) or reacts with general acids to form BrOClO. The distribution of products suggests that BrOClO exists as a BrOClO.HOCl adduct in the presence of excess HOCl. The primary products, ClO(3)(-) and HOBr, are formed from the hydrolysis of BrOClO.HOCl. A minor hydrolysis path for BrOClO.HOCl gives BrO(3)(-) and Cl(-). An induction period in the formation of ClO(2) is observed due to the buildup of ClO(2)(-), which reacts with BrOClO.HOCl to give 2 ClO(2) and Br(-). Second-order rate constants for the reactions of HOCl and Cl(2)O with BrO(2)(-) are k(1)(HOCl) = 1.6 x 10(2) M(-1) s(-1) and k(1)(Cl)()2(O) = 1.8 x 10(5) M(-)(1) s(-)(1). When Cl(-) is added in large excess, a Cl(2) pathway exists in competition with the HOCl and Cl(2)O pathways for the loss of BrO(2)(-). The proposed Cl(2) pathway proceeds by Cl(+) transfer to form a steady-state ClOBrO species with a rate constant of k(1)(Cl2) = 8.7 x 10(5) M(-1) s(-1).     

Comparative kinetics and mechanism of oxygen and sulfur atom transfer reactions mediated by bis(dithiolene) complexes of molybdenum and tungsten

Although the kinetics and mechanism of metal-mediated oxygen atom (oxo) transfer reactions have been examined in some detail, sulfur atom (sulfido) transfer reactions have not been similarly scrutinized. The reactions [M(IV)(O-p-C(6)H(4)X')(S(2)C(2)Me(2))(2)](1-) + Ph(3)AsQ --> [M(VI)Q(O-p-C(6)H(4)X')(S(2)C(2)Me(2))(2)](1-) + Ph(3)As (M = Mo, W; Q = O, S) with variable substituent X' have been investigated in acetonitrile in order to determine the relative rates of oxo versus sulfido transfer at constant structure (square pyramidal) of the atom acceptor and of atom transfer at constant structure of the atom donor and metal variability of the atom acceptor. All reactions exhibit second-order kinetics and entropies of activation (-25 to -45 eu) consistent with an associative transition state. At parity of atom acceptor, k(2)(S) (0.25-0.75 M(-1)s(-1)) > k(2)(O) (0.023-0.060 M(-1)s(-1)) with M = Mo and k(2)(S) (4.1-66.7 M(-1)s(-1)) > k(2)(O) (1.8-9.8 M(-1)s(-1)) with M = W. At constant atom donor and X', k(2)(W) > k(2)(Mo) with reactivity ratios k(2)(W)/k(2)(Mo) = 78-184 (Q = O) and 16-89 (Q = S). Rate constants refer to 298 K. At constant M and Q, rates increase in the order X' = Me less, similar OMe < H < Br < COMe < CN; increasing electron-withdrawing propensity accelerates reaction rates. The probable transition state involves significant Ph(3)AsQ...M bond-making (X' rate trend) and concomitant As-Q bond weakening (bond energy order As-O > As-S). Orders of oxo and sulfido donor ability of substrates and complexes are deduced on the basis of qualitative reactivity properties determined here and elsewhere. This work complements previous studies of the reaction systems [M(IV)(O-p-C(6)H(4)X')(S(2)C(2)Me(2))(2)](1-)/XO where the substrates are N-oxides and S-oxides and k(2)(W) > k(2)(Mo) at constant substrate also applies. The reaction order of substrates is Me(3)NO > (CH(2))(4)SO > Ph(3)AsS > Ph(3)AsO. This research provides the first quantitative information of metal-mediated sulfido transfer.     

Hypohalite ion catalysis of the disproportionation of chlorine dioxide

The disproportionation of chlorine dioxide in basic solution to give ClO2- and ClO3- is catalyzed by OBr- and OCl-. The reactions have a first-order dependence in both [ClO2] and [OX-] (X = Br, Cl) when the ClO2- concentrations are low. However, the reactions become second-order in [ClO2] with the addition of excess ClO2-, and the observed rates become inversely proportional to [ClO2-]. In the proposed mechanisms, electron transfer from OX- to ClO2(k1OBr- = 2.05 +/- 0.03 M(-1) x s(-1) for OBr(-)/ClO2 and k1OCl-= 0.91 +/- 0.04 M(-1) x s(-1) for OCl-/ClO2) occurs in the first step to give OX and ClO2-. This reversible step (k1OBr-/k(-1)OBr = 1.3 x 10(-7) for OBr-/ClO2, / = 5.1 x 10(-10) for OCl-/ClO2) accounts for the observed suppression by ClO2-. The second step is the reaction between two free radicals (XO and ClO2) to form XOClO2. These rate constants are = 1.0 x 10(8) M(-1) x s(-1) for OBr/ClO2 and = 7 x 10(9) M(-1) x s(-1) for OCl/ClO2. The XOClO2 adduct hydrolyzes rapidly in the basic solution to give ClO3- and to regenerate OX-. The activation parameters for the first step are DeltaH1(++) = 55 +/- 1 kJ x mol(-1), DeltaS1(++) = - 49 +/- 2 J x mol(-1) x K(-1) for the OBr-/ClO2 reaction and DeltaH1(++) = 61 +/- 3 kJ x mol(-1), DeltaS1(++) = - 43 +/- 2 J x mol(-1) x K(-1) for the OCl-/ClO2 reaction.     

9-Oxidophenalenone: a noninnocent β-diketonate ligand?

The redox systems [Ru(L)(bpy)(2)](k), [Ru(L)(2)(bpy)](m), and [Ru(L)(3)](n) containing the potentially redox-active ligand 9-oxidophenalenone = L(-) were investigated by spectroelectrochemistry (UV-vis-near-IR and electron paramagnetic resonance) in conjunction with density functional theory (DFT) calculations. Compounds [Ru(L(-))(bpy)(2)]ClO(4) ([1]ClO(4)) and [Ru(L(-))(2)(bpy)]ClO(4) ([2]ClO(4)) were structurally characterized. In addition to establishing electron-transfer processes involving the Ru(II)/Ru(III)/Ru(IV) and bpy(0)/bpy(?-) couples, evidence for the noninnocent behavior of L(-) was obtained from [Ru(IV)(L(?))(L(-))(bpy)](3+), which exhibits strong near-IR absorption due to ligand-to-ligand charge transfer. In contrast, the lability of the electrogenerated anion [Ru(L)(2)(bpy)](-) is attributed to a resonance situation [Ru(II)(L(?2-))(L(-))(bpy)](-)/[Ru(II)(L(-))(2) (bpy(?-))](-), as suggested by DFT calculations.     

Kinetics and mechanism of catalytic decomposition and oxidation of chlorine dioxide by the hypochlorite ion

The oxidation of ClO(2) by OCl(-)is first order with respect to both reactants in the neutral to alkaline pH range: -d[ClO(2)]/dt = 2k(OCl)[ClO(2)][OCl(-)]. The rate constant (T = 298 K, mu = 1.0 M NaClO(4)) and activation parameters are k(OCl) = 0.91 +/- 0.02 M(-1) s(-1), DeltaH = 66.5 +/- 0.9 kJ/mol, and DeltaS(++) = -22.3 +/- 2.9 J/(mol K). In alkaline solution, pH > 9, the primary products of the reaction are the chlorite and chlorate ions and consumption of the hypochlorite ion is not observed. The hypochlorite ion is consumed in increasing amounts, and the production of the chlorite ion ceases when the pH is decreased. The stoichiometry is kinetically controlled, and the reactants/products ratios are determined by the relative rates of the production and consumption of the chlorite ion in the ClO(2)/OCl(-) and HOCl/ClO(2)(-) reactions, respectively.     

Monomeric oxovanadium(IV) compounds of the general formula cis-[V(IV)(=O)(X)(L(NN))(2)](+/0) [X = OH(-), Cl(-), SO(4)(2)(-) and L(NN) = 2,2'-bipyridine (bipy) or 4,4'-disubstituted bipy

Reaction of [V(IV)OCl(2)(THF)(2)] in aqueous solution with 2 equiv of AgBF(4) or AgSbF(6) and then with 2 equiv of 2,2'-bipyridine (bipy), 4,4'-di-tert-butyl-2,2'-bipyridine (4,4'-dtbipy), or 4,4'-di-methyl-2,2'-bipyridine (4,4'-dmbipy) affords compounds of the general formula cis-[V(IV)O(OH)(L(NN))(2)]Y [where L(NN) = bipy, Y = BF(4)(-) (1), L(NN) = 4,4'-dtbipy, Y = BF(4)(-) (2.1.2H(2)O), L(NN) = 4,4'-dmbipy, Y = BF(4)(-) (3.2H(2)O), and L(NN) = 4,4'-dtbipy, Y = SbF(6)(-) (4)]. Sequential addition of 1 equiv of Ba(ClO(4))(2) and then of 2 equiv of bipy to an aqueous solution containing 1 equiv of V(IV)OSO(4).5H(2)O yields cis-[V(IV)O(OH)(bipy)(2)]ClO(4) (5). The monomeric compounds 1-5 contain the cis-[V(IV)O(OH)](+) structural unit. Reaction of 1 equiv of V(IV)OSO(4).5H(2)O in water and of 1 equiv of [V(IV)OCl(2)(THF)(2)] in ethanol with 2 equiv of bipy gives the compounds cis-[V(IV)O(OSO(3))(bipy)(2)].CH(3)OH.1.5H(2)O (6.CH(3)OH.1.5H(2)O) and cis-[V(IV)OCl(bipy)(2)]Cl (7), respectively, while reaction of 1 equiv of [V(IV)OCl(2)(THF)(2)] in CH(2)Cl(2) with 2 equiv of 4,4'-dtbipy gives the compound cis-[V(IV)OCl(4,4'-dtbipy)(2)]Cl.0.5CH(2)Cl(2) (8.0.5CH(2)Cl(2)). Compounds cis-[V(IV)O(BF(4))(4,4'-dtbipy)(2)]BF(4) (9), cis-[V(IV)O(BF(4))(4,4'-dmbipy)(2)]BF(4) (10), and cis-[V(IV)O(SbF(6))(4,4'-dtbipy)(2)]SbF(6) (11) were synthesized by sequential addition of 2 equiv of 4,4'-dtbipy or 4,4'-dmbipy and 2 equiv of AgBF(4) or AgSbF(6) to a dichloromethane solution containing 1 equiv of [V(IV)OCl(2)(THF)(2)]. The crystal structures of 2.1.2H(2)O, 6.CH(3)OH.1.5H(2)O, and 8.0.5CH(2)Cl(2) were demonstrated by X-ray diffraction analysis. Crystal data are as follows: Compound 2.1.2H(2)O crystallizes in the orthorhombic space group Pbca with (at 298 K) a = 21.62(1) A, b = 13.33(1) A, c = 27.25(2) A, V = 7851(2) A(3), Z = 8. Compound 6.CH(3)OH.1.5H(2)O crystallizes in the monoclinic space group P2(1)/a with (at 298 K) a = 12.581(4) A, b = 14.204(5) A, c = 14.613(6) A, beta = 114.88(1) degrees, V = 2369(1), Z = 4. Compound 8.0.5CH(2)Cl(2) crystallizes in the orthorhombic space group Pca2(1) with (at 298 K) a = 23.072(2) A, b = 24.176(2) A, c = 13.676(1) A, V = 7628(2) A(3), Z = 8 with two crystallographically independent molecules per asymmetric unit. In addition to the synthesis and crystallographic studies, we report the optical, infrared, magnetic, conductivity, and CW EPR properties of these oxovanadium(IV) compounds as well as theoretical studies on [V(IV)O(bipy)(2)](2+) and [V(IV)OX(bipy)(2)](+/0) species (X = OH(-), SO(4)(2)(-), Cl(-)).     

An expanded set of functional groups in bis(dithiolene)tungsten(IV,VI) complexes related to the active sites of tungstoenzymes, Including WIV-SR and WVI-O(SR)

The active sites of tungstoenzymes have the formulations W(IV,V)L(S(2)pd)(2) and W(VI)LL'(S(2)pd)(2), in which two pyranopterindithiolene cofactor ligands (S(2)pd) are chelated to a tungsten atom. Ligands L and/or L' are not fully defined in any wild-type enzyme. The feasibility of various coordination fragments (functional groups) in potential bis(dithiolene)tungsten site analogues has been examined in previous work by exploratory synthesis. This investigation expands the range of accessible functional groups. The synthetic scheme originates with [W(CO)(2)(S(2)C(2)Me(2))(2)], whose carbonyl groups are labile to substitution. Complexes [W(IV,VI)LL'(S(2)C(2)Me(2))(2)](1-) are described in terms of their functional groups W(IV,VI)LL'. Reaction of the dicarbonyl with formate in acetonitrile/THF affords W(IV)(CO)(eta(1)-HCO(2)) (4) and in Me(2)SO W(VI)O(eta(1)-HCO(2)) (7) by an oxo transfer reaction. Carboxylates yield six-coordinate W(IV)(eta(2)-O(2)CR) (1-3, R = Ph, Me, Bu(t)) with C(2)(v) symmetry. Reaction of 3 (R = Bu(t)) with Me(3)SiSR (R = C(6)H(2)-2,4,6-Pr(i)(3)) gives W(IV)(SR) (5), which undergoes oxo and sulfido atom transfer to form W(VI)O(SR) (8) and W(VI)S(SR) (9), respectively. Attempts to prepare corresponding selenolate complexes, pertinent to the active site of formate dehydrogenase, were unsuccessful, including reactions of W(VI)OCl (10) with RSe(-). Structure proofs of 2-10 were obtained by X-ray structure determinations. Some 26 functional group types in bis(dithiolene)W(IV,V,VI) molecules have now been achieved by synthesis. It remains to be seen which are incorporated in an enzyme site. A number of them (e.g., 5) are directly analogous to molybdoenzyme sites, and may possess corresponding reactivity with biological substrates, as do W(IV)(OR)/W(VI)O(OR) (prepared earlier) in the reduction of N- and S-oxides by atom transfer.     

Chlorine dioxide reduction by aqueous iron(II) through outer-sphere and inner-sphere electron-transfer pathways

The reduction of ClO(2) to ClO(2)(-) by aqueous iron(II) in 0.5 M HClO(4) proceeds by both outer-sphere (86%) and inner-sphere (14%) electron-transfer pathways. The second-order rate constant for the outer-sphere reaction is 1.3 x 10(6) M(-1) s(-1). The inner-sphere electron-transfer reaction takes place via the formation of FeClO(2)(2+) that is observed as an intermediate. The rate constant for the inner-sphere path (2.0 x 10(5) M(-1) s(-1)) is controlled by ClO(2) substitution of a coordinated water to give an inner-sphere complex between ClO(2) and Fe(II) that very rapidly transfers an electron to give (Fe(III)(ClO(2)(-))(H(2)O)(5)(2+))(IS). The composite activation parameters for the ClO(2)/Fe(aq)(2+) reaction (inner-sphere + outer-sphere) are the following: DeltaH(r)++ = 40 kJ mol(-1); DeltaS(r)++ = 1.7 J mol(-1) K(-1). The Fe(III)ClO(2)(2+) inner-sphere complex dissociates to give Fe(aq)(3+) and ClO(2)(-) (39.3 s(-1)). The activation parameters for the dissociation of this complex are the following: DeltaH(d)++= 76 kJ mol(-1); DeltaS(d)++= 32 J K(-1) mol(-1). The reaction of Fe(aq)(2+) with ClO(2)(-) is first order in each species with a second-order rate constant of k(ClO2)- = 2.0 x 10(3) M(-1) s(-1) that is five times larger than the rate constant for the Fe(aq)(2+) reaction with HClO(2) in H(2)SO(4) medium ([H(+)] = 0.01-0.13 M). The composite activation parameters for the Fe(aq)(2+)/Cl(III) reaction in H(2)SO(4) are DeltaH(Cl(III))++ = 41 kJ mol(-1) and DeltaS(Cl(III))++ = 48 J mol(-1) K(-1).     

Oxyhalogen-sulfur chemistry: kinetics and mechanism of oxidation of N-acetylthiourea by chlorite and chlorine dioxide

The oxidation reactions of N-acetylthiourea (ACTU) by chlorite and chlorine dioxide were studied in slightly acidic media. The ACTU-ClO(2)(-) reaction has a complex dependence on acid with acid catalysis in pH > 2 followed by acid retardation in higher acid conditions. In excess chlorite conditions the reaction is characterized by a very short induction period followed by a sudden and rapid formation of chlorine dioxide and sulfate. In some ratios of oxidant to reductant mixtures, oligo-oscillatory formation of chlorine dioxide is observed. The stoichiometry of the reaction is 2:1, with a complete desulfurization of the ACTU thiocarbamide to produce the corresponding urea product: 2ClO(2)(-) + CH(3)CONH(NH(2))C=S + H(2)O --> CH(3)CONH(NH(2))C=O + SO(4)(2-) + 2Cl(-) + 2H(+) (A). The reaction of chlorine dioxide and ACTU is extremely rapid and autocatalytic. The stoichiometry of this reaction is 8ClO(2)(aq) + 5CH(3)CONH(NH(2))C=S + 9H(2)O --> 5CH(3)CONH(NH(2))C=O + 5SO(4)(2-) + 8Cl(-) + 18H(+) (B). The ACTU-ClO(2)(-) reaction shows a much stronger HOCl autocatalysis than that which has been observed with other oxychlorine-thiocarbamide reactions. The reaction of chlorine dioxide with ACTU involves the initial formation of an adduct which hydrolyses to eliminate an unstable oxychlorine intermediate HClO(2)(-) which then combines with another ClO(2) molecule to produce and accumulate ClO(2)(-). The oxidation of ACTU involves the successive oxidation of the sulfur center through the sulfenic and sulfinic acids. Oxidation of the sulfinic acid by chlorine dioxide proceeds directly to sulfate bypassing the sulfonic acid. Sulfonic acids are inert to further oxidation and are only oxidized to sulfate via an initial hydrolysis reaction to yield bisulfite, which is then rapidly oxidized. Chlorine dioxide production after the induction period is due to the reaction of the intermediate HOCl species with ClO(2)(-). Oligo-oscillatory behavior arises from the fact that reactions that form ClO(2) are comparable in magnitude to those that consume ClO(2), and hence the assertion of each set of reactions is based on availability of reagents that fuel them. A computer simulation study involving 30 elementary and composite reactions gave a good fit to the induction period observed in the formation of chlorine dioxide and in the autocatalytic consumption of ACTU in its oxidation by ClO(2).     

Nucleophile assistance of electron-transfer reactions between nitrogen dioxide and chlorine dioxide concurrent with the nitrogen dioxide disproportionation

The reaction of chlorine dioxide with excess NO(2)(-) to form ClO(2)(-) and NO(3)(-) in the presence of a large concentration of ClO(2)(-) is followed via stopped-flow spectroscopy. Concentrations are set to establish a preequilibrium among ClO(2), NO(2)(-), ClO(2)(-), and an intermediate, NO(2). Studies are conducted at pH 12.0 to avoid complications due to the ClO(2)(-)/NO(2)(-) reaction. These conditions enable the kinetic study of the ClO(2) reaction with nitrogen dioxide as well as the NO(2) disproportionation reaction. The rate of the NO(2)/ClO(2) electron-transfer reaction is accelerated by different nucleophiles (NO(2)(-) > Br(-) > OH(-) > CO(3)(2-) > PO(4)(3-) > ClO(2)(-) > H(2)O). The third-order rate constants for the nucleophile-assisted reactions between NO(2) and ClO(2) (k(Nu), M(-2) s(-1)) at 25.0 degrees C vary from 4.4 x 10(6) for NO(2-) to 2.0 x 10(3) when H(2)O is the nucleophile. The nucleophile is found to associate with NO(2) and not with ClO(2) in the rate-determining step to give NuNO(2)(+) + ClO(2)(-). The concurrent NO(2) disproportionation reaction exhibits no nucleophilic effect and has a rate constant of 4.8 x 10(7) M(-1) s(-1). The ClO(2)/NO(2)/nucleophile reaction is another example of a system that exhibits general nucleophilic acceleration of electron transfer. This system also represents an alternative way to study the rate of NO(2) disproportionation.     

General-acid-catalyzed reactions of hypochlorous acid and acetyl hypochlorite with chlorite ion

The rate of oxidation of ClO2- by HOCl is first order in each reactant and is general-acid catalyzed. In the initial steps of the proposed mechanism, a steady-state intermediate, HOClOClO-, forms (k1 = 1.6 M-1 s-1) and undergoes general-acid (HA)-catalyzed reactions (k2HA) to generate a metastable intermediate, ClOClO. Values of k2HA/k-1 are 1.6 x 10(4) M-1 (H3O+), 20 M-1 (HOAc), and 8.5 M-1 (H2PO4-). Subsequent competitive reactions of ClOClO with ClO2- (k3) to give 2ClO2 and with OH- (k4OH) and other bases (k5B) to give ClO3- are very rapid. The relative yields of these products give k4OH/k3 = 1.3 x 10(5), k5HPO4/k3 = 0.20, and k5OAc/k3 = 0.06. At low pH and low buffer concentrations, the apparent yield of ClO2, based on 2ClO2 per initial HOCl, reaches 140%. This anomaly is attributed to the induced disproportionation of ClO2- by ClOClO to give ClO3- and additional HOCl. A highly reactive intermediate, ClOCl(O)OClO-, is proposed that can undergo Cl-O bond cleavage to give 2ClO2 + Cl- via one path and ClO3- + 2HOCl via another path. The additional HOCl recycles in the presence of excess ClO2- to give more ClO2. Ab initio calculations show feasible structures for the proposed reaction intermediates. Acetic acid has a second catalytic role through the formation of acetyl hypochlorite, which is much more reactive than HOCl in the transfer of Cl+ to ClO2- to form ClOClO.     

Aggregation control by homologous tripodal tetradentate amino acid ligands in oxo-bridged diiron(III) aquo complexes

Isoelectronic oxo-bridged diiron(III) aquo complexes of the homologous tripodal tetradentate amino acid ligands, N,N'-bis(2-pyridylmethyl)-3-aminoacetate (bpg(-)) and N,N'-bis(2-pyridylmethyl)-3-aminopropionate (bpp(-)), containing [(H(2)O)Fe(III)-(mu-O)-Fe(III)(H(2)O)](4+) cores, oligomerise, respectively, by dehydration and deprotonation, or by dehydration only, in reversible reactions. In the solid state, [Fe(2)(O)(bpp)(2)(H(2)O)(2)](ClO(4))(2) (1(ClO(4))(2)) exhibits stereochemistry identical to that of [Fe(2)(O)(bpg)(2)(H(2)O)(2)](ClO(4))(2) (2(ClO(4))(2)), with the ligand carboxylate donor oxygen atoms and the water molecules located cis to the oxo bridge and the tertiary amine group trans to it. Despite their structural similarity, 1(2+) and 2(2+) display markedly different aggregation behaviour in solution. In the absence of significant water, 1(2+) dehydrates and dimerises to give the tetranuclear complex, [Fe(4)(O)(2)(bpp)(4)](ClO(4))(4) (3(ClO(4))(4)), in which the carboxylate groups of the four bpp(-) ligands act as bridging groups between two [Fe(2)(O)(bpp)(2)](2+) units. Under similar conditions, 2(2+) dehydrates and deprotonates to form dinuclear and trinuclear oligomers, [Fe(2)(O)(OH)(bpg)(2)](ClO(4)) (4ClO(4)) and [Fe(3)(O)(2)(OH)(bpg)(3)](ClO(4)) (5(ClO(4))), related by addition of 'Fe(O)(bpg)' units. The trinuclear 5(ClO(4)), characterised crystallographically as two solvates 5(ClO(4)).3H(2)O and 5(ClO(4)).2MeOH, is based on a hexagonal [Fe(3)(O)(2)(OH)(bpg)(3)](+) unit, formally containing one hydroxo and two oxo bridges. The different aggregation behaviour of 1(ClO(4))(2) and 2(ClO(4))(2) results from the difference of one methylene group in the pendant carboxylate arms of the amino acid ligands.     

Catecholase activity of a series of dicopper(II) complexes with variable Cu-OH(phenol) moieties

The catecholase activity of a series of dicopper(II) complexes containing different numbers of phenol groups coordinated to the metal centers was studied to identify functional as well as structural models for the type III copper enzymes tyrosinase and catechol oxidase. The syntheses and characterization of complexes [Cu(2)(H(2)bbppnol)(mu-OAc)(H(2)O)(2)]Cl(2).2H(2)O (1) and [Cu(2)(Hbtppnol)(mu-OAc)](ClO(4))(2) (2) were previously reported by us (Inorg. Chim. Acta 1998, 281, 111-115; Inorg. Chem. Commun. 1999, 2, 334-337), and complex [Cu(2)(P1-O(-))(OAc(-))](ClO(4))(2) (3) was previously reported by Karlin et al. (J. Am. Chem. Soc. 1997, 119, 2156-2162). The catalytic activity of the complexes 1-3 on the oxidation of 3,5-di-tert-butylcatechol was determined spectrophotometrically by monitoring the increase of the 3,5-di-tert-butyl-o-benzoquinone characteristic absorption band at about 400 nm over time in methanol saturated with O(2)/aqueous buffer pH 8 solutions at 25 degrees C. The complexes were able to oxidize 3,5-di-tert-butylcatechol to the corresponding o-quinone with distinct catalytic activity. A kinetic treatment of the data based on the Michaelis-Mentèn approach was applied. The [Cu(2)(H(2)bbppnol)(mu-OAc)(H(2)O)(2)]Cl(2) small middle dot2H(2)O complex showed the highest catalytic activity of the three complexes as a result of a high turnover rate (k(cat) = 28 h(-1)) combined with a moderate substrate-catalyst binding constant (K(ass) = 1.3 x 10(3) M(-1)). A mechanism for the oxidation reaction is proposed, and reactivity differences, k(cat)/K(M) of the complexes, were found to be dependent on (DeltaE)(1,2), the difference in the driving force for the reduction reactions Cu(II)(2)/Cu(II)Cu(I) and Cu(II)Cu(I)/Cu(I)(2).     

Kinetics and mechanism of the oxidation of sulfite by chlorine dioxide in a slightly acidic medium

The sulfite-chlorine dioxide reaction was studied by stopped-flow method at I = 0.5 M and at 25.0 +/- 0.1 degrees C in a slightly acidic medium. The stoichiometry was found to be 2 SO(3)(2-) + 2.ClO(2) + H(2)O --> 2SO(4)(2) (-) + Cl(-) + ClO(3)(-) + 2H(+) in *ClO(2) excess and 6SO(3)(2-) + 2*ClO(2) --> S(2)O(6)(2-) + 4SO(4)(2-) + 2Cl(-) in total sulfite excess ([S(IV)] = [H(2)SO(3)] + [HSO(3)(-)] + [SO(3)(2-)]). A nine-step model with four fitted kinetic parameters is suggested in which the proposed adduct *SO(3)ClO(2)(2-) plays a significant role. The pH-dependence of the kinetic traces indicates that SO(3)(2-) reacts much faster with *ClO(2) than HSO(3)(-) does.     

Dehydration reaction of hydroxyl substituted alkenes and alkynes on the Ru(2)S(2) complex

A variety of inter- and intramolecular dehydration was found in the reactions of [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)(mu-S(2))](CF(3)SO(3))(4) (1) with hydroxyl substituted alkenes and alkynes. Treatment of 1 with allyl alcohol gave a C(3)S(2) five-membered ring complex, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SCH(2)CH(2)CH(OCH(2)CH=CH(2))S]](CF(3)SO(3))(4) (2), via C-S bond formation after C-H bond activation and intermolecular dehydration. On the other hand, intramolecular dehydration was observed in the reaction of 1 with 3-buten-1-ol giving a C(4)S(2) six-membered ring complex, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2) [mu-SCH(2)CH=CHCH(2)S]](CF(3)SO(3))(4) (3). Complex 1 reacts with 2-propyn-1-ol or 2-butyn-1-ol to give homocoupling products, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SCR=CHCH(OCH(2)C triple bond CR)S]](CF(3)SO(3))(4) (4: R = H, 5: R = CH(3)), via intermolecular dehydration. In the reaction with 2-propyn-1-ol, the intermediate complex having a hydroxyl group, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SCH=CHCH(OH)S]](CF(3)SO(3))(4) (6), was isolated, which further reacted with 2-propyn-1-ol and 2-butyn-1-ol to give 4 and a cross-coupling product, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SCH=CHCH(OCH(2)C triple bond CCH(3))S]](CF(3)SO(3))(4) (7), respectively. The reaction of 1 with diols, (HO)CHRC triple bond CCHR(OH), gave furyl complexes, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SSC=CROCR=CH]](CF(3)SO(3))(3) (8: R = H, 9: R = CH(3)) via intramolecular elimination of a H(2)O molecule and a H(+). Even though (HO)(H(3)C)(2)CC triple bond CC(CH(3))(2)(OH) does not have any propargylic C-H bond, it also reacts with 1 to give [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SCH(2)C(=CH(2))C(=C=C(CH(3))(2))]S](CF(3)SO(3))(4) (10). In addition, the reaction of 1 with (CH(3)O)(H(3)C)(2)CC triple bond CC(CH(3))(2)(OCH(3)) gives [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(2)][mu-S=C(C(CH(3))(2)OCH(3))C=CC(CH(3))CH(2)S][Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)]](CF(3)SO(3))(4) (11), in which one molecule of CH(3)OH is eliminated, and the S-S bond is cleaved.     

Slow relaxation in a one-dimensional rational assembly of antiferromagnetically coupled [Mn4] single-molecule magnets

Four discrete Mn(III)/Mn(II) tetranuclear complexes with a double-cuboidal core, [Mn(4)(hmp)(6)(CH(3)CN)(2)(H(2)O)(4)](ClO(4))(4).2CH(3)CN (1), [Mn(4)(hmp)(6)(H(2)O)(4)](ClO(4))(4).2H(2)O (2), [Mn(4)(hmp)(6)(H(2)O)(2)(NO(3))(2)](ClO(4))(2).4H(2)O (3), and [Mn(4)(hmp)(6)(Hhmp)(2)](ClO(4))(4).2CH(3)CN (4), were synthesized by reaction of Hhmp (2-hydroxymethylpyridine) with Mn(ClO(4))(2).6H(2)O in the presence of tetraethylammonium hydroxide and subsequent addition of NaNO(3) (3) or an excess of Hhmp (4). Direct current (dc) magnetic measurements show that both Mn(2+)-Mn(3+) and Mn(3+)-Mn(3+) magnetic interactions are ferromagnetic in 1-3 leading to an S(T) = 9 ground state for the Mn(4) unit. Furthermore, these complexes are single-molecule magnets (SMMs) clearly showing both thermally activated and ground-state tunneling regimes. Slight changes in the [Mn(4)] core geometry result in an S(T) = 1 ground state in 4. A one-dimensional assembly of [Mn(4)] units, catena-{[Mn(4)(hmp)(6)(N(3))(2)](ClO(4))(2)} (5), was obtained in the same synthetic conditions with the subsequent addition of NaN(3). Double chairlike N(3)(-) bridges connect identical [Mn(4)] units into a chain arrangement. This material behaves as an Ising assembly of S(T) = 9 tetramers weakly antiferromagnetically coupled. Slow relaxation of the magnetization is observed at low temperature for the first time in an antiferromagnetic chain, following an activated behavior with Delta(tau)/k(B) = 47 K and tau(0) = 7 x 10(-)(11) s. The observation of this original thermally activated relaxation process is induced by finite-size effects and in particular by the noncompensation of spins in segments of odd-number units. Generalizing the known theories on the dynamic properties of polydisperse finite segments of antiferromagnetically coupled Ising spins, the theoretical expressions of the characteristic energy gaps Delta(xi) and Delta(tau) were estimated and successfully compared to the experimental values.     

Kinetics and mechanism of bromate-bromide reaction catalyzed by acetate

The initial rate of the bromate-bromide reaction, BrO3- + 5Br- + 6H+ --> 3Br2 + 3H2O, has been measured at constant ionic strength, I = 3.0 mol L(-1), and at several initial concentrations of acetate, bromate, bromide, and perchloric acid. The reaction was followed at the Br2/Br3- isosbestic point (lambda = 446 nm) by the stopped-flow technique. A very complex behavior was found such that the results could be fitted only by a six term rate law, nu = k1[BrO3-][Br-][H+]2 + k2[BrO3-][Br-]2[H+]2 + k3[BrO3-][H+]2[acetate]2 + k4[BrO3-][Br-]2[H+]2[acetate] + k5[BrO3-][Br-][H+]3[acetate]2 + k6[BrO3-][Br-][H+]2[acetate], where k1 = 4.12 L3 mol(-3) s(-1), k2 = 0.810 L4 mol(-4) s(-1), k3 = 2.80 x 10(3) L4 mol(-4) s(-1), k4 = 278 L5 mol(-5) s(-1), k5 = 5.45 x 10(7) L6 mol(-6) s(-1), and k6 = 850 L4 mol(-4) s(-1). A mechanism, based on elementary steps, is proposed to explain each term of the rate law. This mechanism considers that when acetate binds to bromate it facilitates its second protonation.     

Nature of the reactants and influence of water on the supramolecular assembly

The influences of the nature of reactants and water on the self-assembly of cationic Cu(II) complex structures containing N-(2-pyridylmethyl)glycine (Hpgly) and N-(2-pyridylmethyl)-l-alanine (Hpala) ligands have been investigated. A metallamacrocycle [Cu(6)(pgly)(3)(spgly)(3)] (ClO(4))(6).9H(2)O has been formed by the reaction of [Cu(pgly)(2)].2H(2)O with Cu(ClO(4))(2).6H(2)O. The hexameric cation has Schiff base and reduced Schiff base ligands alternatively bonded to Cu(II) to provide cyclohexane-like conformation with a cavity diameter of 9.4 A. The reaction of Cu(ClO(4))(2).6H(2)O with Hpgly.HCl yielded [Cu(pgly)(H(2)O)](ClO(4)), which is presumed to have 1D coordination polymeric structure. A [K subset [12-MC-3]] metallacrown, [K(ClO(4))(3)[Cu(3)(pala)(3)]](ClO(4)) has been isolated by reacting Cu(ClO(4))(2) with Kpala in MeCN/MeOH. This [K subset [12-MC-3]] metallacrown further reacts with water to form an infinite 1D coordination polymer [Cu(pala)(H(2)O)(ClO(4))](n)(), which can also be obtained by conducting the reaction in aqueous MeOH.