Review of Analytical Methods for Atmospheric Oxidants Measurements

Abstract

Instrumental and manual methods currently available for the measurement of atmospheric oxidants are surveyed. Techniques used in the United States are emphasized and their advantages and disadvantages are discussed. Commercial systems are evaluated in terms of general operating principles rather than of specific instruments. The ability of these techniques to meet the measurement requirements defined by U.S. Federal air quality oxidant criteria are discussed. Alternative chemical techniques that may have some advantages over the neutral, buffered KI procedure are discussed. Also some attractive, alternative instrumental procedures that are ozone-specific are presented. These systems are based on chemiluminescence and ultraviolet absorption photometry. Electrochemical and colorimetric methods for total oxidant measurements are compared. Finally, some data are presented on relationships of ozone and total oxidants.     

A study of mica structure and strength properties of polymer materials based on it

The mica microstructure is studied, and its shape and particle sizes are found as dependent on coating technology. Using epoxy and organosilicon polymers, several lots of materials with different contents of mica are prepared and mechanical tests are performed. The optimal amounts of mica wherein the initial strength characteristics are preserved are found. The thicknesses of epoxy and organosilicon polymer wherein high optical decorative properties of mica are preserved are determined.     

The Application of NMR Spectroscopy and Chemometrics in Authentication of Spices

Spices and herbs are among the most commonly adulterated food types. This is because spices are widely used to process food. Spices not only enhance the flavor and taste of food, but they are also sources of numerous bioactive compounds that are significantly beneficial for health. The healing effects of spices are connected with their antimicrobial, anti-inflammatory and carminative properties. However, regular consumption of adulterated spices may cause fatal damage to our system because adulterants in most cases are unhealthy. For that reason, the appropriate analytical methods are necessary for quality assurance and to ensure the authenticity of spices. Spectroscopic methods are gaining interest as they are fast, require little or no sample preparation, and provide rich structural information. This review provides an overview of the application of NMR spectroscopy combined with chemometric analysis to determine the quality and adulteration of spices.     

Electrostatic correlations in polyelectrolyte solutions

The major attribute of polyelectrolyte solutions is that all chains are strongly correlated both electrostatically and topologically. Even in very dilute solutions such that the chains are not interpenetrating, the chains are still strongly correlated. These correlations are manifest in the measured scattering intensity when such solutions are subjected to light, X-ray, and neutron radiation. The behavior of scattering intensity from polyelectrolyte solutions is qualitatively different from that of solutions of uncharged polymers. Using the technique introduced by Sir Sam Edwards, and extending the earlier work by the author on the thermodynamics of polyelectrolyte solutions, extrapolation formulas are derived for the scattering intensity from polyelectrolyte solutions. The emergence of the polyelectrolyte peak and its concentration dependence are derived. The derived theory shows that there are five regimes. Published experimental data from many laboratories are also collected into a master figure and a comparison between the present theory and experiments is presented.     

A perturbative calculation of the rovibrational energy levels of methane

The rovibrational energy levels of methane are determined from a quartic ab initio potential energy force field where the expansion coordinates are the Morse coordinates for the stretches and extension coordinates for the bends. Energies are calculated using canonical Van Vleck perturbation theory. Results are obtained for both rotation-vibration Hamiltonians expressed as functions of curvilinear and rectilinear normal coordinates. Second, fourth, and sixth order curvilinear results are compared with experimental results, and fourth order results for the rectilinear and curvilinear Hamiltonian are compared to each other. The calculated rovibrational levels are in good agreement with the experimental values for low J levels. The calculated rotational level splittings are in even better agreement with the experiment. In particular, the ground state tetrahedral splittings, which are as small as 10(-4) cm(-1), are well reproduced by our calculations at sixth order.     

Contactless conductivity detection for microfluidics: designs and applications

Different methods for construction of contactless conductivity detectors (CCD) for microchip electrophoresis device are described in this review. This includes three main schemes of CCD for microchips, such as (i) the detection electrodes are placed along the microchannel from outside of the microchip and they are insulated from the channel by the cover lid of microchip device; (ii) the electrodes are placed across of the microchannel in the same plane and they are insulated by thin separation channel walls and (iii) electrodes are buried in widened part of microchannel and they are insulated from solution by ultrathin layer of silicon carbide. Specific issues related to the CCD on microfluidics are discussed, such as an influence of shape and magnitude of ac voltage and placement of electrodes and their insulation. Various applications for security, pharmacological, bioassays and food analysis purposes are described.     

钼、钨系过氧化物在Sharpless烯烃环氧化反应中的应用*

钼、钨系过氧化物是非常重要的Sharpless烯烃环氧化催化剂,有着非常广泛的工业发展前景。本文综述了钼、钨系过氧化物的种类,结构,合成方法及催化活性,分析了各种钼、钨系过氧化物的特点以及在催化环氧化领域的发展现状。同时,本文还讨论了钼、钨系过氧化物催化烯烃环氧化反应的机理。评述了在催化环氧化领域中两种主要理论——Mimoun机理与Sharpless机理的争论焦点及发展现状,以及计算化学对两种理论中间过渡态的研究进展,并且重点分析了Sharpless机理的过渡态结构。此外,本文还综述了影响钼、钨系过氧化物催化剂反应活性的各种因素以及质子所产生的副反应。最后,本文对应用于催化环氧化领域的钼、钨系过氧化物未来的研究方向提出了建议。     

Densities,speeds of sound,excess volumes and viscosities of binary mixtures of mtbe with tetralin and decalin at 303.15 k

Measurements of densities, speeds of sound, excess volumes and viscosities of binary mixture of methyl tert-butyl ether with tetralin and decalin are reported at 303.15?K over the entire range of composition. Excess volumes are measured using batch dilatometer technique. Sound speeds are obtained using ultrasonic interferometer. Densities are computed from excess volume data. Isentropic compressibilities are derived from density and sound speed data. Speeds of sound are evaluated on the basis of Jacobson's free length theory and Schaff's collision factor theory. The predicted values are in good agreement with the experimental results. The viscosity data are analysed on the basis of corresponding states approach. Excess volumes and deviation in isentropic compressibilities are negative and deviation in viscosities are positive over the entire composition range. The experimental results are discussed in terms of possible molecular interactions between unlike molecules.     

Ionisation Energies and the Electronic Structures of the N-oxides of diazabenzenes

The ionisation energies and the HeI photoelectron spectra of the N-oxides of diazabenzenes are presented. The valence electronic structures of the N-oxides are discussed in view of the ionisation energies, and the profiles, of the bands. The interpreted data are compared to calculations which are in good agreement. The results are correlated to the physicochemical studies, and particularly to the electronic absorption spectroscopy, of the N-oxides. The assignment of the photoelectron spectra of the azabenzenes are considered with reference to the spectra of their N-oxides.     

Extension of semiempirical methods to simulation of surfaces

Various approaches for surface simulation are described. They are based on free, saturated, and embedded clusters, as well as periodic models. The features of semiempirical methods are reviewed and ideas for their improvement are discussed. Special features of the structure and stability of clusters are presented which are suitable for the transition to the solid state. Linear and nonlinear relationships for binding energies and bond lengths in dependence of the average coordination number are discussed. Finally, a systematic way for the simulation of adsorption at ion crystal surfaces by model clusters is suggested. © 1996 John Wiley & Sons, Inc.     

Structures, energetics, and spectra of hydrated hydroxide anion clusters

The structures, energetics, electronic properties, and spectra of hydrated hydroxide anions are studied using density functional and high level ab initio calculations. The overall structures and binding energies are similar to the hydrated anion clusters, in particular, to the hydrated fluoride anion clusters except for the tetrahydrated clusters and hexahydrated clusters. In tetrahydrated system, tricoordinated structures and tetracoordinated structures are compatible, while in pentahydrated systems and hexahydrated systems, tetracoordinated structures are stable. The hexahydrated system is similar in structure to the hydrated chloride cluster. The thermodynamic quantities (enthalpies and free energies) of the clusters are in good agreement with the experimental values. The electronic properties induced by hydration are similar to hydrated chloride anions. The charge-transfer-to-solvent energies of these hydrated-hydroxide anions are discussed, and the predicted ir spectra are used to explain the experimental data in terms of the cluster structures. The low-energy barriers between the conformations along potential energy surfaces are reported.     

Interaction of basalt with hydrochloric acid

Physicochemical modeling and experimental investigations are performed to study the interaction of basalt with hydrochloric acid. The equilibrium compositions of the liquid and solid phases of the basalt-hydrogen chloride-water system are calculated. The effects of the hydrochloric acid concentration and solid-to-liquid weight ratio on the phase composition of reaction products are quantified, and the degrees of extraction of iron, aluminum, calcium, sodium, and silicon into liquid are determined. The results of physicochemical modeling are compared with the experimental data. Conditions for selective extraction of the basalt components into solution are estimated.     

纳米SiO2的表面处理及其在聚合物基纳米复合材料中的应用进展

简要介绍了纳米二氧化硅(SiO2)粒子的制备方法、结构和特性,对近年来国内外纳米SiO2的表面处理方法及聚合物/SiO2纳米复合材料的制备方法进行了阐述,并针对不同改性方法和制备方法的特点加以分析比较;讨论了SiO2粒子的分散机理和增强机理,并对未来的研究内容及方向提出展望。     

Bioinspired Strategies for Stretchable Conductors

Stretchable conductors are indispensable components of stretchable electronic devices, such as stretchable sensors, transistors, light-emitting diode arrays, solar cells, and so on. However, most of the conductive materials are stiff with very low stretchability. Nature has evolved various strategies to realize stretchability, which give a lot of inspirations to the design and fabrication of stretchable conductors. We herein summarized the nature’s strategies to realize stretchability and revealed the underlying mechanisms. After that, the applications of these strategies in fabricating stretchable conductors are exemplified and the effects of some important parameters on the performances are discussed. Then, possible applications of these stretchable conductors are summarized. Finally, critical issues in the stretchable conductors are discussed and several prospective exploration directions are provided.     

Synthesis of Iso-condensed Heteroaromatic Pyrroles and Their Application in the Preparation of Conducting Polymers

Iso-condensed heteroaromatic pyrroles 1 are 10 -electron aromatic compounds. They are of interest from both theoretical and synthetic points of view. They are the cyclic analogues of heteroaromatic ortho-quinodimethanes 2, and can react with dienophiles in a Diels-Alder reaction to give the synthetically useful cycloadducts 3. Many of them are also of potential pharmaceutical importance because they are isosteric with indoles. Iso-condensed heteroaromatic pyrroles 1 can be used also as the monomers for the synthesis of new conducting polymers 5 with special properties and characteristics. However, the methods for the efficient preparation of the iso-condensed heteroaromatic pyrroles are quite limited. Iso-condensed heteroaromatic pyrroles are generally unstable in acidic conditions and are easily oxidized by air. In our laboratories, we developed three methods for the preparation of this labile heterocyclic ring system under acidic, neutral, and basic conditions.1 Synthesis of the conjugated systems such as 6 for OLED applications will also be discussed.     

Inorganic electrides

Inorganic electrides are a novel kind of ionic compounds in which the anions are electrons confined in a complex array of cavities or channels and the cations are nanoscale arrays of alkali metal ions that provide charge balance. In electrides the donated electron behaves like a low-density correlated electron gas, whereby the dimensionality of the electron gas and its electronic and magnetic properties are determined by the topology of the cavities in the host matrix. Unlike traditional electrides, in which alkali cations are encapsulated within an organic cage, inorganic electrides are thermally stable. The current inorganic electrides based on alkali metal loaded zeolites can be designed as useful reduced-dimensionality materials. Inorganic electrides are powerful reducing agents, and they are able to reduce small aromatic molecules to the radical anions within the channels of the zeolite.     

Valence- and dipole-bound anions of the thymine-water complex: ab initio characterization of the potential energy surfaces

The potential energy surfaces of the neutral and anionic thymine-water complexes are investigated using high-level ab initio calculations. Both dipole-bound (DB) and valence-bound (VB) anionic forms are considered. Four minima and three first-order stationary points are located, and binding energies are computed. All minima, for both anions, are found to be vertically and adiabatically stable. The binding energies are much higher for valence-bound than for dipole-bound anions. Adiabatic electron affinities are in the 66-287 meV range for VB anions and the 4-60 meV range for DB anions, and vertical detachment energies are in the 698-977 meV and 10-70 meV range for VB and DB anions, respectively. For cases where literature data are available, the computed values are in good agreement with previous experimental and theoretical studies. It is observed that electron attachment modifies the shape of the potential energy surfaces of the systems, especially for the valence-bound anions. Moreover, for both anions the size of the energy barrier between the two lowest energy minima is strongly reduced, rendering the coexistence of different structures more probable.     

Recent reviews. 55

Reviews are listed in order of appearance in the sources indicated. In multidisciplinary review journals, only those reviews which fall within the scope of this Journal are included. Sources are listed alphabetically in three categories: regularly issued review journals and series volumes, contributed volumes, and other monographs. Titles are numbered serially, and these numbers are used for reference in the index. Major English-language sources of critical reviews are covered. Encyclopedic treatises, annual surveys such as Specialist Periodical Reports, and compilations of symposia proceedings are omitted. This installment of Recent Reviews covers principally the middle part of the 1999 Literature. Previous installment: J. Org. Chem. 1999, 64, 4(21), 7679-86.     

Immunochemical methods for the determination of mycotoxins

The state-of-the-art immunochemical methods for the determination of mycotoxins are considered. Both instrumental (enzyme-linked immunosorbent assay, polarization fluoroimmunoassay, and sensor devices) and noninstrumental methods are presented. The principles of particular methods are considered, and the examples of the use of these methods for the determination of mycotoxins from various groups in food products and animal feeds are given; the main lines of development are discussed.