A General Route to Prepare Low‐Ruthenium‐Content Bimetallic Electrocatalysts for pH‐Universal Hydrogen Evolution Reaction by Using Carbon Quantum Dots

A challenging but pressing task to design and synthesize novel, efficient, and robust pH‐universal hydrogen evolution reaction (HER) electrocatalysts for scalable and sustainable hydrogen production through electrochemical water splitting. Herein, we report a facile method to prepare an efficient and robust Ru‐M (M=Ni, Mn, Cu) bimetal nanoparticle and carbon quantum dot hybrid (RuM/CQDs) for pH‐universal HER. The RuNi/CQDs catalysts exhibit outstanding HER performance at all pH levels. The unexpected low overpotentials of 13, 58, and 18 mV shown by RuNi/CQDs allow a current density of 10 mA cm^?2 in 1 m KOH, 0.5 m H₂SO₄, and 1 m PBS, respectively, for Ru loading at 5.93 μgRu cm^?2. This performance is among the best catalytic activities reported for any platinum‐free electrocatalyst. Theoretical studies reveal that Ni doping results in a moderate weakening of the hydrogen bonding energy of nearby surface Ru atoms, which plays a critical role in improving the HER activity.     

Hollow Nanotube Ru/Cu2+1O Supported on Copper Foam as a Bifunctional Catalyst for Overall Water Splitting

Hydrogen energy is considered as one of the ideal clean energies for solving the energy shortage and environmental issues, and developing highly efficient electrocatalysts for overall water splitting to produce hydrogen is still a huge challenge. Herein, for the first time, Ru-doped Cu₂₊₁O vertically arranged nanotube arrays in situ grown on Cu foam (Ru/Cu₂₊₁O NT/CuF) are reported and further investigated for their catalytic properties for overall water splitting. The Ru/Cu₂₊₁O NT/CuF presents ultrahigh catalytic activities for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline conditions, and it exhibits a small overpotential of 32 mV at 10 mA cm⁻² in the HER, and only needs 210 mV overpotential to achieve a current density of 10 mA cm⁻² in the OER. Importantly, the alkaline electrolyzer using Ru/Cu₂₊₁O NT/CuF as a bifunctional electrocatalyst only needs 1.53 V voltage to deliver a current density of 10 mA cm⁻², which is much lower than the benchmark of IrO₂(+)/Pt(−) counterpart (1.64 V at 10 mA cm⁻²). The excellent performance of the Ru/Cu₂₊₁O NT/CuF catalyst is attributed to its high conductive substrate and special Ru-doped nanotube structure, which provides a high electrochemical active surface area and 3D gas diffusion channel.     

Two-Dimensional NiIr@N-Doped Carbon Nanocomposites Supported on Ni Foam for Electrocatalytic Overall Water Splitting

Electrochemical water splitting can provide a promising avenue for sustainable hydrogen production. Highly efficient electrocatalysts toward the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) are extremely important for the practical application of water splitting technology. Herein, a one-step annealing strategy is reported for the fabrication of a metal–organic framework-derived bifunctional self-supported electrocatalyst, which is composed of two-dimensional N-doped carbon-wrapped Ir-doped Ni nanoparticle composites supported on Ni foam (NiIr@N-C/NF). The resultant NiIr@N-C/NF displays excellent electrocatalytic performance in 1.0 m KOH, with low overpotentials of 32 mV at 10 mA cm⁻² for the HER and 329 mV at 50 mA cm⁻² for the OER. Particularly, the HER-OER bifunctional NiIr@N-C/NF needs only 1.50 V to yield 10 mA cm⁻² for overall water splitting.     

Ru-Doping Enhanced Electrocatalysis of Metal–Organic Framework Nanosheets toward Overall Water Splitting

An Ru-doping strategy is reported to substantially improve both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) electrocatalytic activity of Ni/Fe-based metal–organic framework (MOF) for overall water splitting. As-synthesized Ru-doped Ni/Fe MIL-53 MOF nanosheets grown on nickel foam (MIL-53(Ru-NiFe)@NF) afford HER and OER current density of 50 mA cm⁻² at an overpotential of 62 and 210 mV, respectively, in alkaline solution with a nominal Ru loading of ≈110 μg cm⁻². When using as both anodic and cathodic (pre-)catalyst, MIL-53(Ru-NiFe)@NF enables overall water splitting at a current density of 50 mA cm⁻² for a cell voltage of 1.6 V without iR compensation, which is much superior to state-of-the-art RuO₂-Pt/C-based electrolyzer. It is discovered that the Ru-doping considerably modulates the growth of MOF to form thin nanosheets, and enhances the intrinsic HER electrocatalytic activity by accelerating the sluggish Volmer step and improving the intermediate oxygen adsorption for increased OER catalytic activity.     

Nickel Foam Supported NiO@Ru Heterostructure Towards High-Efficiency Overall Water Splitting

Electrocatalytic water splitting for hydrogen production from renewable energy requires the innovation of electrocatalysts with high activity and low cost. In this work, densely packed NiO@Ru nanosheets were fabricated on the surface of Ni foam through a two-step method of Ni(OH)₂ growth followed by Ru deposition. Through pair distribution function analysis from selected-area electron diffraction and X-ray photoelectron spectroscopy, the interface structure feature is revealed as a thin layer of perovskite NiRuO₃ sandwiched between NiO and Ru. The electrode exhibits high activity and durability for HER and OER, delivering a current density of 10 mA cm⁻² at a voltage of 1.55 V for overall water splitting in 1 M KOH. The excellent performance can be attributed to the intimate interface contact of NiO and Ru in addition to low charge transfer resistance and super-hydrophilic surface structure, as verified by the electrochemical impedance spectroscopy and contact-angle measurement.     

Heterostructured Inter-Doped Ruthenium–Cobalt Oxide Hollow Nanosheet Arrays for Highly Efficient Overall Water Splitting

The development of transition-metal-oxides (TMOs)-based bifunctional catalysts toward efficient overall water splitting through delicate control of composition and structure is a challenging task. Herein, the rational design and controllable fabrication of unique heterostructured inter-doped ruthenium–cobalt oxide [(Ru–Co)O_x] hollow nanosheet arrays on carbon cloth is reported. Benefiting from the desirable compositional and structural advantages of more exposed active sites, optimized electronic structure, and interfacial synergy effect, the (Ru–Co)O_x nanoarrays exhibited outstanding performance as a bifunctional catalyst. Particularly, the catalyst showed a remarkable hydrogen evolution reaction (HER) activity with an overpotential of 44.1 mV at 10 mA cm⁻² and a small Tafel slope of 23.5 mV dec⁻¹, as well as an excellent oxygen evolution reaction (OER) activity with an overpotential of 171.2 mV at 10 mA cm⁻². As a result, a very low cell voltage of 1.488 V was needed at 10 mA cm⁻² for alkaline overall water splitting.     

Controlled Synthesis of 3D Flower‐like Ni2P Composed of Mesoporous Nanoplates for Overall Water Splitting

Developing efficient non‐noble metal and earth‐abundant electrocatalysts with tunable microstructures for overall water splitting is critical to promote clean energy technologies for a hydrogen economy. Herein, novel three‐dimensional (3D) flower‐like Ni₂P composed of mesoporous nanoplates with controllable morphology and high surface area was prepared by a hydrothermal method and low‐temperature phosphidation as efficient electrocatalysts for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Compared with the urchin‐like Ni_x P_y , the 3D flower‐like Ni₂P with a diameter of 5 μm presented an efficient and stable catalytic performance in 0.5 m H₂SO₄, with a small Tafel slope of 79 mV dec⁻¹ and an overpotential of about 240 mV at a current density of 10 mA cm⁻² with a mass loading density of 0.283 mg cm⁻². In addition, the catalyst also exhibited a remarkable performance for the OER in 1.0 m KOH electrolyte, with an overpotential of 320 mV to reach a current density of 10 mA cm⁻² and a small Tafel slope of 72 mV dec⁻¹. The excellent catalytic performance of the as‐prepared Ni₂P may be ascribed to its novel 3D morphology with unique mesoporous structure.     

Benchmarking Three Ruthenium Phosphide Phases for Electrocatalysis of the Hydrogen Evolution Reaction: Experimental and Theoretical Insights

The outstanding electrocatalytic activity of ruthenium (Ru) phosphides toward the hydrogen evolution reaction (HER) has received wide attention. However, the effect of the Ru phosphide phase on the HER performance remains unclear. Herein, a two-step method was developed to synthesize nanoparticles of three types of Ru phosphides, namely, Ru₂P, RuP, and RuP₂, with similar morphology, dimensions, loading density, and electrochemical surface area on graphene nanosheets by simply controlling the dosage of phytic acid as P source. Electrochemical tests revealed that Ru₂P/graphene shows the highest intrinsic HER activity, followed by RuP/graphene and RuP₂/graphene. Ru₂P/graphene affords a current density of 10 mA cm⁻² at an overpotential of 18 mV in acid media. Theoretical calculations further showed that P-deficient Ru₂P has a lower free energy of hydrogen adsorption on the surface than other two, P-rich Ru phosphides (RuP, RuP₂), which confirms the excellent intrinsic HER activity of Ru₂P and is consistent with experiment results. The work reveals for the first time a clear trend of HER activity among three Ru phosphide phases.     

Efficient and Robust Hydrogen Evolution: Phosphorus Nitride Imide Nanotubes as Supports for Anchoring Single Ruthenium Sites

Amorphous phosphorus nitride imide nanotubes (HPN) are reported as a novel substrate to stabilize materials containing single‐metal sites. Abundant dangling unsaturated P vacancies play a role in stabilization. Ruthenium single atoms (SAs) are successfully anchored by strong coordination interactions between the d orbitals of Ru and the lone pair electrons of N located in the HPN matrix. The atomic dispersion of Ru atoms can be distinguished by X‐ray absorption fine structure measurements and spherical aberration correction electron microscopy. Importantly, Ru SAs@PN is an excellent electrocatalyst for the hydrogen evolution reaction (HER) in 0.5 m H₂SO₄, delivering a low overpotential of 24 mV at 10 mA cm^?2 and a Tafel slope of 38 mV dec^?1. The catalyst exhibits robust stability in a constant current test at a large current density of 162 mA cm^?2 for more than 24 hours, and is operative for 5000 cycles in a cyclic voltammetry test. Additionally, Ru SAs@PN presents a turnover frequency (TOF) of 1.67 H₂ s^?1 at 25 mV, and 4.29 H₂ s^?1 at 50 mV, in 0.5 m H₂SO₄ solution, outperforming most of the reported hydrogen evolution catalysts. Density functional theory (DFT) calculations further demonstrate that the Gibbs free energy of adsorbed H* over the Ru SAs on PN is much closer to zero compared with the Ru/C and Ru SAs supported on carbon and C₃N₄, thus considerably facilitating the overall HER performance.     

Facile and Large-Scale Fabrication of Sub-3 nm PtNi Nanoparticles Supported on Porous Carbon Sheet: A Bifunctional Material for the Hydrogen Evolution Reaction and Hydrogenation

Facile and large-scale preparation of materials with uniform distributions of ultrafine particles for catalysis is a challenging task, and it is even more difficult to obtain catalysts that excel in both the hydrogen evolution reaction (HER) and hydrogenation, which are the corresponding merging and splitting procedures of hydrogen, respectively. Herein, the fabrication of ultrafine bimetallic PtNi nanoparticles embedded in carbon nanosheets (CNS) by means of in situ self-polymerization and annealing is reported. This bifunctional catalyst shows excellent performance in the hydrogen evolution reaction (HER) and the hydrogenation of p-nitrophenol. Remarkably PtNi bimetallic catalyst with low metal loading (PtNi₂@CNS-600, 0.074 wt % Pt) exhibited outstanding HER activity with an overpotential as low as 68 mV at a current density of 10 mA cm⁻² with a platinum loading of only 0.612 μg_Pt cm⁻² and Tafel slope of 35.27 mV dec⁻¹ in a 0.5 m aqueous solution of H₂SO₄, which is comparable to that of the 20 % Pt/C catalyst (31 mV dec⁻¹). Moreover, it also shows superior long-term electrochemical durability for at least 30 h with negligible degradation compared with 20 % Pt/C. In addition, the material with increased loading (mPtNi₂@CNS-600, 2.88 % Pt) showed robust catalytic activity for hydrogenation of p-nitrophenol at ambient pressure and temperature. The catalytic activity towards hydrogen splitting is a circumstantial evidence that agrees with the Volmer–Tafel reaction path in the HER.     

High Valence State Sites as Favorable Reductive Centers for High-Current-Density Water Splitting

Electrochemical water splitting is a promising approach for producing sustainable and clean hydrogen. Typically, high valence state sites are favorable for oxidation evolution reaction (OER), while low valence states can facilitate hydrogen evolution reaction (HER). However, here we proposed a high valence state of Co³⁺ in Ni_9.5Co_0.5−S−FeO_x hybrid as the favorable center for efficient and stable HER, while structural analogues with low chemical states showed much worse performance. As a result, the Ni_9.5Co_0.5−S−FeO_x catalyst could drive alkaline HER with an ultra-low overpotential of 22 mV for 10 mA cm⁻², and 175 mV for 1000 mA cm⁻² at the industrial temperature of 60 °C, with an excellent stability over 300 h. Moreover, this material could work for both OER and HER, with a low cell voltage being 1.730 V to achieve 1000 mA cm⁻² for overall water splitting at 60 °C. X-ray absorption spectroscopy (XAS) clearly identified the high valence Co³⁺ sites, while in situ XAS during HER and theoretical calculations revealed the favorable electron capture at Co³⁺ and suitable H adsorption/desorption energy around Co³⁺, which could accelerate the HER. The understanding of high valence states to drive reductive reactions may pave the way for the rational design of energy-related catalysts.     

Optimization of the Hydrogen-Adsorption Free Energy of Ru-Based Catalysts towards High-Efficiency Hydrogen Evolution Reaction at all pH

The utilization of noble-metal catalysts for the hydrogen evolution reaction (HER) provides an efficient strategy for hydrogen acquisition. However, exploring catalysts with suitable hydrogen binding strength for the HER process is always of great importance, but extremely challenging. In this work, sulfur and phosphor as electron-withdrawing elements were incorporated into carbon nanotube (CNT)-supported Ru catalysts, which were prepared through a facile solution reduction reaction and post thermo treatment. Owing to the suitable electronegativity provided by P and synergistic effects of the carbon nanotubes, the RuP₂/CNT achieved a high catalytic performance as a HER electrocatalyst. This may result from the modulation effect of the electronic properties and the depressed adsorption free energy of RuP₂. Electrochemical tests present that the RuP₂/CNT composite exhibit a small overpotential of 58 mV at 10 mA cm⁻² in acidic electrolyte. In a neutral or alkaline environment, the overpotential is 82 and 40 mV, respectively. The RuP₂/CNT electrode also possesses stable durability for long-time cycling, suggesting its remarkable property as promising all-pH HER catalyst.     

Devisable POM/Ni Foam Composite: Precisely Control Synthesis toward Enhanced Hydrogen Evolution Reaction at High pH

Polyoxometalates (POMs) are promising catalysts for the electrochemical hydrogen production from water owing to their high intrinsic catalytic activity and chemical tunability. However, poor electrical conductivity and easy detachment of the POMs from the electrode cause significant challenges under operating condition. Herein, a simple one-step hydrothermal method is reported to synthesize a series of Dexter–Silverton POM/Ni foam composites (denoted as Ni M -POM/Ni; M =Co, Zn, Mn), in which the stable linkage between the POM catalysts and the Ni foam electrodes lead to high activity for the hydrogen evolution reaction (HER). Among them, the highest HER performance can be observed in the NiCo-POM/Ni, featuring an overpotential of 64 mV (at 10 mA cm⁻², vs. reversible hydrogen electrode), and a Tafel slope of 75 mV dec⁻¹ in 1.0 m aqueous KOH. Moreover, the NiCo-POM/Ni catalyst showed a high faradaic efficiency ≈97 % for HER. Post-catalytic of NiCo-POM/Ni analyses showed virtually no mechanical or chemical degradation. The findings propose a facile and inexpensive method to design stable and effective POM-based catalysts for HER in alkaline water electrolysis.     

Enhanced catalytic activity of Ru through N modification toward alkaline hydrogen electrocatalysis

Exploring highly efficient electrocatalysts and understanding the reaction mechanisms for hydrogen electrocatalysis,including hydrogen oxidation reaction （HOR） and hydrogen evolution reaction （HER） in alkaline media are conducive to the conversion of hydrogen energy.Herein,we reported a new strategy to boost the HER/HOR performances of ruthenium （Ru） nanoparticles through nitrogen （N） modification.The obtained N-Ru/C exhibit remarkable catalytic performance,with normalized HOR exchange current d...     

Constructing RuCoOx/NC Nanosheets with Low Crystallinity within ZIF-9 as Bifunctional Catalysts for Highly Efficient Overall Water Splitting

Electrocatalysts play a pivotal role in accelerating the sluggish electrochemical water splitting reaction. Herein, a Ru−Co oxides and carbon nitrides hybrid (RuCoO_x/NC) electrocatalyst was constructed by employing ZIF-9 to disperse Ru precursor and deliberately regulating the calcination temperature. The moderate calcination temperature results in the RuCoO_x nanocomposites with small particle size and low crystallinity as well as the co-existence of multi-valence metal compounds, thus boosting the amount and species of active sites. Moreover, the strong interactions between Co and Ru species induce the electron transfer from Co to Ru, thus enhancing the adsorption of anion intermediates on the electron-deficient Co species and the proton capturing capacity of electron-sufficient Ru species. As a result, the optimized RuCoO_x/NC-350 catalyst behaved good electrocatalytic activities with 73 and 210 mV overpotential to achieve 10 mA cm⁻² for HER and OER, respectively. Remarkably, it showed good durability by holding at 100 mA cm⁻² for 100 h in HER and 50 mA cm⁻² for 24 h in OER with small activity decline. This study may shed new light on the rational construction of highly efficient Ru-based catalysts for electrochemical water splitting.     

Hierarchical Architectures Based on Ru Nanoparticles/Oxygen-Rich-Carbon Nanotubes for Efficient Hydrogen Evolution

Highly active and durable electrocatalysts are essential for producing hydrogen fuel through the hydrogen evolution reaction (HER). Here, a uniform deposition of Ru nanoparticles strongly interacting with oxygen-rich carbon nanotube architectures (Ru-OCNT) through ozonation and hydrothermal approaches has been designed. The hierarchical structure of Ru-OCNT is made by self-assembly of oxygen functionalities of OCNT. Ru nanoparticles interact strongly with OCNT at the Ru/OCNT interface to give excellent catalytic activity and stability of the Ru-OCNT, as further confirmed by density functional theory. Owing to the hierarchical structure and adjusted surface chemistry, Ru-OCNT has an overpotential of 34 mV at 10 mA cm⁻² with a Tafel slope of 27.8 mV dec⁻¹ in 1 M KOH, and an overpotential of 55 mV with Tafel slope of 33 mV dec⁻¹ in 0.5 M H₂SO₄. The smaller Tafel slope of Ru-OCNT than Ru-CNT and commercial Pt/C in both alkaline and acidic electrolytes indicates high catalytic activity and fast charge transfer kinetics. The as-proposed chemistry provides the rational design of hierarchically structured CNT/nanoparticle electrocatalysts for HER to produce hydrogen fuel.     

Cooperative Ni(Co)-Ru-P Sites Activate Dehydrogenation for Hydrazine Oxidation Assisting Self-powered H2 Production

Water electrolysis for H₂ production is restricted by the sluggish oxygen evolution reaction (OER). Using the thermodynamically more favorable hydrazine oxidation reaction (HzOR) to replace OER has attracted ever-growing attention. Herein, we report a twisted NiCoP nanowire array immobilized with Ru single atoms (Ru₁−NiCoP) as superior bifunctional electrocatalyst toward both HzOR and hydrogen evolution reaction (HER), realizing an ultralow working potential of −60 mV and overpotential of 32 mV for a current density of 10 mA cm⁻², respectively. Inspiringly, two-electrode electrolyzer based on overall hydrazine splitting (OHzS) demonstrates outstanding activity with a record-high current density of 522 mA cm⁻² at cell voltage of 0.3 V. DFT calculations elucidate the cooperative Ni(Co)−Ru−P sites in Ru₁−NiCoP optimize H* adsorption, and enhance adsorption of *N₂H₂ to significantly lower the energy barrier for hydrazine dehydrogenation. Moreover, a self-powered H₂ production system utilizing OHzS device driven by direct hydrazine fuel cell (DHzFC) achieve a satisfactory rate of 24.0 mol h⁻¹ m⁻².     

Heterointerface engineering of Ru/RuS2 on N/S-doped hollow mesoporous carbon for promoting alkaline hydrogen evolution

Alkaline hydrogen evolution reaction (HER) suffers from a sluggish kinetic, which requires the elaborate catalytic interface and micro-nanoscale architecture engineering of the electrocatalysts to accelerate the water dissociation and hydrogen evolution. Herein, the heterointerface engineering was proposed for promoting the alkaline HER by constructing the highly exposed Ru/RuS₂ heterostructures homogeneously distributed on hollow N/S-doped carbon microspheres (Ru/RuS₂@h-NSC). Benefited from the synergistic effect of heterointerfacial Ru/RuS₂, the high accessibility of the active sites on both inner and outer surface of mesoporous shells and the efficient mass transport, Ru/RuS₂@h-NSC affords a remarkable catalytic performance with an overpotential of 26 mV@10 mA/cm² for alkaline HER, outperforming most of the state-of-the-art catalysts. Further applying Ru/RuS₂@h-NSC and its oxidized derivate for the overall alkaline water splitting, the required cell voltage is much lower than that of the commercial Pt/C||RuO₂ pair to achieve the same current density. Our study may allow us to guide the design of micro-nanoreactors with optimal catalytic interfaces for promising electrocatalytic applications.     

The Core/Shell Structure P Doped MoS2@Ni3S2 Nanorods Array for High Current Density Hydrogen Evolution in Alkaline and Acidic Electrolyte

Electrocatalysis is the most promising strategy to generate clean energy H₂, and the development of catalysts with excellent hydrogen evolution reaction (HER) performance at high current density that can resist strong alkaline and acidic electrolyte environment is of great significance for practical industrial application. Therefore, a P doped MoS₂@Ni₃S₂ nanorods array (named P-NiMoS) was successfully synthesized through successive sulfuration and phosphorization. P-NiMoS presents a core/shell structure with a heterojunction between MoS₂ (shell) and Ni₃S₂ (core). Furthermore, the doping of P modulates the electronic structure of the P-NiMoS; the electrons transfer from the t_2g orbital of Ni element to the e_g empty orbital of Mo element through the Ni−S−Mo bond at the Ni₃S₂ and MoS₂ heterojunction, facilitating the hydrogen evolution reaction. As a result, P-NiMoS exhibits excellent HER activity; the overpotential is 290 mV at high current density of 250 mA cm⁻² in alkaline electrolyte, which is close to Pt/C (282 mV@250 mA cm⁻²), and P-NiMoS can stably evolve hydrogen for 48 h.     

Hierarchical Tubular Architecture Constructed by Vertically Aligned CoS2-MoS2 Nanosheets for Hydrogen Evolution Electrocatalysis

Developing efficient electrocatalysts for the hydrogen evolution reaction (HER) is crucial for establishing a sustainable and environmentally friendly energy system, but it is still a challenging issue. Herein, hierarchical tubular-structured CoS₂-MoS₂/C as efficient electrocatalysts are fabricated through a unique metal–organic framework (MOF) mediated self-sacrificial templating. Core–shell structured MoO₃@ZIF-67 nanorods are used both as a precursor and a sacrificial template to form the one-dimensional tubular heterostructure where vertically aligned two-dimensional CoS₂-MoS₂ nanosheets are formed on the MOF-derived carbon tube. Trace amounts of noble metals (Pd, Rh, and Ru) are successfully introduced to enhance the electrocatalytic property of the CoS₂-MoS₂/C nanocomposites. The as-synthesized hierarchical tubular heterostructures exhibit excellent HER catalytic performance owing to the merits of the hierarchical hollow architecture with abundantly exposed edges and the uniformly dispersed active sites. Impressively, the optimal Pd-CoS₂-MoS₂/C-600 catalyst delivers a current density of 10 mA cm⁻² at a low overpotential of 144 mV and a small Tafel slope of 59.9 mV/dec in 0.5 m H₂SO₄. Overall, this MOF-mediated strategy can be extended to the rational design and synthesis of other hollow heterogeneous catalysts for scalable hydrogen generation.