CoFe2O4@SiO2-NH2-CoII NPs catalyzed Hantzsch reaction as an efficient,reusable catalyst for the facile,green, one-pot synthesis of novel functionalized 1,4-dihydropyridine derivatives

A magnetically heterogeneous CoFe₂O₄@SiO₂-NH₂-Co^II nanoparticle was synthesized by the immobilization of Co (II) complex onto CoFe₂O₄@SiO₂ nanoparticles, and the heterogeneous magnetic nanocatalyst was characterized by XRD, TEM, TGA, EDX, and FT-IR techniques. Then, the green and reusable method was introduced for a multicomponent synthesis of 1,4-dihydropyridine derivatives via Hantszch reaction. The synthesis of 1,4-dihydropyridine derivatives was proceeded by the reaction of aldehyde, ethyl acetoacetate, and ammonium acetate in the presence of this magnetic nanocatalyst in EtOH/Water (1:1). Simple work-up, short reaction times, excellent yields (60–96%) as well as green solvent are some advantages of this novel approach, and the corresponding products were purified with no need for chromatographic separation.     

One-pot synthesis of thiazole-2-imine derivatives by CoFe2O4@SiO2-PA-CC-Guanidine-SA MNPs as an efficient and recyclable catalyst

A novel and atom-economic protocol for the synthesis of thiazole-2-imine derivatives was developed. Synthesis of thiazole-2-imine derivatives from primary amines, phenyl isothiocyanate and phenacyl bromide derivatives by the CoFe₂O₄@SiO₂-PA-CC-Guanidine-SA magnetic nanocatalyst in excellent yields was reported. This nanocatalyst is easily separated from the reaction mixture and can be reused for several times. For the characterization of the catalyst used of Fourier-transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), thermogravimetric analysis (TGA) and vibrating-sample magnetometry (VSM) techniques.     

Preparation and characterization of a novel DABCO-based ionic liquid supported on Fe3O4@TiO2 nanoparticles and investigation of its catalytic activity in the synthesis of quinazolinones

In this study, quinazolinone derivatives have been synthesized via a suitable and efficient procedure by one-potmulti-component reactions of 3-amino-1,2,4-triazole or 2-aminobenzimidazole, dimedone and aromatic aldehydes in the presence of Fe₃O₄@TiO₂-IL as nanocatalyst under solvent-free condition. The products were prepared in good to excellent yields using Fe₃O₄@TiO₂-IL magnetic nanocatalyst. The Fe₃O₄@TiO₂ magnetic nanoparticles (MNPs) were prepared using beet juice extract and functionalized with IL based on DABCO. Moreover, the core-shell structured magnetic Fe₃O₄@TiO₂-IL has been characterized by different techniques such as ¹H-NMR, FT-IR, VSM, XRD, SEM, TGA, TEM and EDX. To the best of our knowledge, the prepared ionic liquid displayed a good protective and activator agent for magnetic nanocatalyst.     

Heterogenized magnetic graphene oxide-supported N6-Schiff base Cu (II) complex as an exclusive nanocatalyst for synthesis of new pyrido[2,3-d]pyrimidine-7-carbonitrile derivatives

In this article, the synthesis of a novel and highly efficient recyclable and reusable heterogeneous nanocatalyst has been reported via the functionalizing of the Fe₃O₄-magnetized graphene oxide nanosheets with the N₆-Schiff base Cu (II) complex (GO/Fe₃O₄@SPNC). The structure of this novel nanocatalyst was determined by different analytical techniques such as FTIR, FE-SEM, TEM, TGA-DTG, and VSM. The catalytic activity of the synthesized GO/Fe₃O₄@SPNC nanocatalyst was explored for the synthesis of several new 2H-pyrido[3′,2′:6,7]pyrano[2,3-d]pyrimidine-7-carbonitrile derivatives with excellent yields. All new derivatives were fully identified by various spectral (¹H NMR, ¹³C NMR, FT-IR, ESI-MS) analyses. In addition, this nanocatalyst carried out satisfactory catalytic maintenance of activity and high chemical stability in the titled reactions after seven-time of recycling without substantial loss of leaching.     

Fe3O4@SiO2/collagen: An efficient magnetic nanocatalyst for the synthesis of benzimidazole and benzothiazole derivatives

In this project, Fe₃O₄@SiO₂ was synthesized and combined with collagen for the preparation of Fe₃O₄@SiO₂/collagen. It was characterized by FT-IR, ¹H NMR, VSM, XRD, EDX, SEM and TEM. This nanocatalyst has some interesting advantages such as facile synthetic procedure, high catalytic activity, easy separation and acceptable reusability. It was applied as an efficient nanocatalyst in the synthesis of benzimidazole and benzothiazole derivatives. This method offers several advantages including high yields, short reaction times, easy workup process and environmentally benign reaction conditions.     

A novel magnetic nanocatalyst Fe3O4@PEG–Ni for the green synthesis of 2,3-dihydroquinazolin-4(1H)-ones

Ni-PEG (polyethylene glycol) complex supported on magnetic nanoparticle was created by grafting. The catalytic activity of Fe₃O₄@PEG–Ni was explored through one-pot green synthesis of 2,3-dihydroquinazolin-4(1H)-ones and used as an efficient and recoverable nanocatalyst. FT-IR, XRD, EDS, BET, TGA, VSM and SEM techniques were employed to specify the nanocatalyst. This heterogeneous nanocatalyst demonstrated acceptable recyclability and could be reused several times with no considerable loss of its catalytic activity.     

Olefins oxidation with molecular O2 in the presence of chiral Mn (III) salen complex supported on magnetic CoFe2O4@SiO2@CPTMS

In the present study, CoFe₂O₄@SiO₂@CPTMS nanocomposite was synthesized and the homogeneous chiral Mn‐salen complex was anchored covalently onto the surface of CoFe₂O₄@SiO₂@CPTMS nanocomposite. The heterogeneous Mn‐salen magnetic nanocatalyst (CoFe₂O₄@SiO₂@CPTMS@ chiral Mn (III) Complex) was characterized by different techniques including transmission electron microscopy (TEM), Fourier transform infrared (FT‐IR), vibrating sample magnetometer (VSM), scanning electron microscopy (SEM), powder X‐ray diffraction (XRD) and thermogravimetric analysis (TGA). Then, the aerobic enantioselective oxidation of olefins to the corresponding epoxide was investigated in the presence of magnetic chiral CoFe₂O₄@SiO₂@Mn (III) complex at ambient conditions within 90 min. The results showed the corresponding products were synthesized with excellent yields and selectivity. In addition, the heterogeneous CoFe₂O₄@SiO₂@ CPTMS@ chiral Mn (III) complex has benefits such as high selectivity and comparable catalytic reactivity with its homogeneous analog as well as mild reaction condition, facile recovery, and recycling of the heterogeneous catalyst.     

Ferrocene‐tagged ionic liquid stabilized on silica‐coated magnetic nanoparticles: Efficient catalyst for the synthesis of 2‐amino‐3‐cyano‐4H‐pyran derivatives under solvent‐free conditions

An advanced novel magnetic ionic liquid based on imidazolium tagged with ferrocene, a supported ionic liquid, is introduced as a recyclable heterogeneous catalyst. Catalytic activity of the novel nanocatalyst was investigated in one‐pot three‐component reactions of various aldehydes, malononitrile and 2‐naphthol for the facile synthesis of 2‐amino‐3‐cyano‐4H‐pyran derivatives under solvent‐free conditions without additional co‐catalyst or additive in air. For this purpose, we firstly synthesized and investigated 1‐(4‐ferrocenylbutyl)‐3‐methylimidazolium acetate, [FcBuMeIm][OAc], as a novel basic ferrocene‐tagged ionic liquid. This ferrocene‐tagged ionic liquid was then linked to silica‐coated nano‐Fe₃O₄ to afford a novel heterogeneous magnetic nanocatalyst, namely [Fe₃O₄@SiO₂@Im‐Fc][OAc]. The synthesized novel catalyst was characterized using ¹H NMR, ¹³C NMR, Fourier transform infrared and energy‐dispersive X‐ray spectroscopies, X‐ray diffraction, and transmission and field emission scanning electron microscopies. Combination of some unique characteristics of ferrocene and the supported ionic liquid developed the catalytic activity in a simple, efficient, green and eco‐friendly protocol. The catalyst could be reused several times without loss of activity.     

CoFe2O4/TMU‐17‐NH2 as a hybrid magnetic nanocomposite catalyst for multicomponent synthesis of dihydropyrimidines

A new magnetic metal–organic framework nanocomposite (CoFe₂O₄/TMU‐17‐NH₂) was prepared via an embedding approach by synthesis of the metal–organic framework crystals in the presence of magnetic cobalt ferrite nanoparticles. We demonstrated that the resulting magnetic nanocomposite can serve as a recyclable nanocatalyst for one‐pot synthesis of bis‐3,4‐dihydropyrimidin‐2(1H)‐one and 3,4‐dihydropyrimidin‐2(1H)‐one derivatives via three‐component reaction of 1,3‐diketone, urea or thiourea and aromatic aldehyde under solvent‐free conditions. CoFe₂O₄/TMU‐17‐NH₂ was characterized using various techniques. The recovery of the nanocomposite was achieved by a simple magnetic decantation and it was reused at least seven times without significant degradation in catalytic activity.     

Silica-coated magnetic palladium nanocatalyst for Suzuki-Miyaura cross-coupling

A silica-coated magnetically separable Schiff-base palladium nanocatalyst was developed. Amorphous silica was used to encapsulate the magnetic Fe₃O₄ and an organic amine functionality was added to the silica surface. The amino group was treated with 1, 10-phenanthroline-2,9-dicarboxaldehyde to produce a Schiff-base, which was then treated with palladium to produce the silica coated magnetic Schiff-base palladium nanocatalyst. The palladium nanocatalyst was fully characterized using several spectroscopic techniques. The HR-SEM image of silica coated Fe₃O₄ revealed a globular shape with a diameter of 145 nm, along with this the average palladium nanoparticle size was 3.5 ± 0.6 nm. The successful functionalization and the appearances of the palladium species as a magnetic catalyst was confirmed by FT-IR and XRD analysis. The palladium nanocatalyst was successfully applied for the construction of CC bonds via Suzuki-Miyaura reaction. With a variety of organoboronic acids, the catalyst displayed great performance for electron-poor and electron-rich aryl halides, resulting in excellent yields of the corresponding cross-coupling products. The magnetic catalyst was retrieved from the reaction vial using an external strong magnet, and it was reused seven times without a significant drop in the production of the corresponding biaryl product.     

Influence of calcination temperature on structural and magnetic properties of nanocomposites formed by Co-ferrite dispersed in sol-gel silica matrix using tetrakis(2-hydroxyethyl) orthosilicate as precursor

Effects of calcination temperatures varying from 400 to 1000°C on structural and magnetic properties of nanocomposites formed by Co-ferrite dispersed in the sol-gel silica matrix using tetrakis(2-hydroxyethyl) orthosilicate (THEOS) as water-soluble silica precursor have been investigated. Studies carried out using XRD, FT-IR, TEM, STA (TG-DTG-DTA) and VSM techniques. Results indicated that magnetic properties of samples such as superparamagnetism and ferromagnetism showed great dependence on the variation of the crystallinity and particle size caused by the calcination temperature. The crystallization, saturation magnetization M_s and remenant magnetization M_r increased as the calcination temperature increased. But the variation of coercivity H_c was not in accordance with that of M_s and M_r, indicating that H_c is not determined only by the crystallinity and size of CoFe₂O₄ nanoparticles. TEM images showed spherical nanoparticles dispersed in the silica network with sizes of 10-30 nm. Results showed that the well-established silica network provided nucleation locations for CoFe₂O₄ nanoparticles to confinement the coarsening and aggregation of nanoparticles. THEOS as silica matrix network provides an ideal nucleation environment to disperse CoFe₂O₄ nanoparticles and thus to confine them to aggregate and coarsen. By using THEOS as water-soluble silica precursor over the currently used TEOS and TMOS, the organic solvents are not needed owing to the complete solubility of THEOS in water. Synthesized nanocomposites with adjustable particle sizes and controllable magnetic properties make the applicability of Co-ferrite even more versatile.     

Air-Stable Fe3O4@SiO2-EDTA-Ni(0) as an Efficient Recyclable Magnetic Nanocatalyst for Effective Suzuki-Miyaura and Heck Cross-Coupling via Aryl Sulfamates and Carbamates

The synthesis of inexpensive and novel air-stable Ni(0) nanoparticles immobilized on the EDTA-modified Fe₃O₄@SiO₂ nanocatalyst was investigated in Suzuki-Miyaura and Heck cross-coupling reactions. This catalytic system displayed a greatly improved substrate scope for the carbon–carbon bond formations starting from a wide range of green and economical electrophiles aryl and heteroaryl carbamates and sulfamates via highly efficient method under mild, operationally simple reaction conditions. The synthesized heterogeneous catalyst was also fully characterized by FT-IR, TEM, XRD, DLS, FE-SEM, UV–Vis, EDX, XPS, TGA, NMR, VSM, ICP and elemental analysis techniques. The heterogeneous magnetic nanocatalyst can easily be recovered by an external magnetic field and reused for the next reactions for at least seven times with negligible leaching of catalyst and no substantial decrement in the activity. All these highlights have made the present protocol an interesting, simple and environmentally benign process with low catalyst loading and easy manipulations.     

Synthesis and characterization of Co (III) salen complex immobilized on cobalt ferrite‐silica nanoparticle and their application in the synthesis of spirooxindoles

The preparation, characterization and catalytic application of Co (III) salen complex loaded on cobalt ferrite‐silica nanoparticle [CoFe₂O₄@SiO₂@ Co (III) salen complex] are described. Co (III) salen complex loaded on ferrite cobalt‐silica nanoparticles is characterized by transmission electron microscopy, scanning electron microscopy coupled with energy‐dispersive X‐ray, vibrating‐sample magnetometer and Fourier transform‐infrared analyses. The thermal stability of the material is also determined by thermal gravimetric analysis. An average crystallite size is determined from the full‐width at half‐maximum of the strongest reflection by using Scherrer's approximation by powder X‐ray diffractometry. The efficiency of CoFe₂O₄@SiO₂@Co (III) salen complex is investigated in the synthesis of spirooxindoles of malononitrile, various isatins with 1,3‐dicarbonyles. The nanocatalyst demonstrated excellent catalytic activity that gave the corresponding coupling products in good to excellent yields. Moreover, the recoverability and reusability of CoFe₂O₄@SiO₂@Co (III) salen complex is investigated where nanocatalyst could be recovered and reused at least five times without any appreciable decrease in activity and selectivity, which confirmed its high efficiency and high stability under the reaction conditions and during recycling stages.     

Catalytic performance of tannic acid-SO3H supported on Fe3O4@SiO2 nanoparticles for synthesis of 2,3-dihydroquinazolin-4(1H)-ones

In this paper all efforts have been devoted to develop stabilized tannic acid-SO₃H on Fe₃O₄@SiO₂ nanoparticles as the new magnetically and eco-friendly nanocatalyst. This nanocatalyst was identified using different techniques such as fourier transform infrared (FT-IR), Powder X-ray diffraction (XRD), vibrating sample magnetometry (VSM), scanning electron microscopy (SEM), energy dispersive x-ray spectroscopy (EDXS) and thermogravimetric analysis (TGA). Catalytic performance of the catalyst in cyclocondensation reaction of anthranilamide with different aldehydes under the friendly environmentally reaction condition led to formation corresponding 2,3-dihydro-4(1H)-quinazolinones compounds in excellent yields. The catalyst could be easily recovered by an external magnet and reused 4 times without significant loss of catalytic activity.     

Comparative study of the synthesis of CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript> and NiFe<Subscript>2</Subscript>O<Subscript>4</Subscript> in silica through the polymerized complex route of the sol–gel method

In this work the synthesis of CoFe₂O₄-SiO₂ and NiFe₂O₄-SiO₂ nanocomposites was studied via the sol–gel method, using the polymerized complex route. The polymerized precursors obtained by the reaction of citric acid, ethylene glycol, tetraethylorthosilicate, ferric nitrate, and cobalt nitrate or nickel chloride were characterized by nuclear magnetic resonance (NMR) and infrared (IR) spectroscopy. NMR and IR spectra of the precursors, without and with metallic ions, show the formation of polymeric chains with ester and ether groups and complexes of metal-polymeric precursor. The nanocomposites were obtained by the thermal decomposition of the organic fraction and characterized by X-ray diffraction (XRD) and vibrating sample magnetometry (VSM). XRD patterns show the formation of CoFe₂O₄ and NiFe₂O₄ in an amorphous silica matrix above 400 °C in both cases. When the calcination temperature was 800 °C the particle size of the crystalline phases, calculated using the Scherrer equation, reached ∼35 nm for the two oxides. VSM plots show the ferrimagnetic behavior that is expected for this type of magnetic material; the magnetization at 12.5 KOe of the CoFe₂O₄-SiO₂ and NiFe₂O₄-SiO₂ compounds was 29.5 and 17.4 emu/g, respectively, for samples treated at 800 °C.     

Synthesis,characterization and application of sulfonic acid supported on ferrite–silica superparamagnetic nanoparticles

In this study, the synthesis of sulfonic acid supported on ferrite–silica superparamagnetic nanoparticles (Fe₃O₄@SiO₂@SO₃H) as a nanocatalyst with large density of acidic groups is suggested. This nanocatalyst was prepared in three steps: preparation of colloidal iron oxide magnetic nanoparticles (Fe₃O₄ MNPs), coating of silica on Fe₃O₄ MNPs (Fe₃O₄@SiO₂) and incorporation of sulfonic acid as a functional group on the surface of Fe₃O₄@SiO₂ nanoparticles (Fe₃O₄@SiO₂@SO₃H). The properties of the prepared magnetic nanoparticles were characterized using transmission electron microscopy, infrared spectroscopy, vibrating sample magnetometry, X‐ray diffraction and thermogravimetric analysis. Finally, the applicability of the synthesized magnetic nanoparticles was tested as a heterogeneous solid acid nanocatalyst for one‐pot synthesis of diindolyloxindole derivatives in aqueous medium. Oxindole derivatives were produced by the coupling of indole and isatin compounds with good to high yields (60–98%). Copyright © 2016 John Wiley & Sons, Ltd.     

CoNiFe2O4@Silica-SO3H nanoparticles: New recyclable magnetic nanocatalyst for the one-pot synthesis of 3,4-dihydropyrimidin-2(1H)-ones/thiones under solvent-free conditions

A useful and green synthesis of 3,4-dihydropyrimidin-2(1H)-ones/thiones derivatives were achieved by one-pot cyclocondensation between substituted aryl aldehydes, diketone/ketoester, and urea/thiourea using magnetic CoNiFe₂O₄@Silica-SO₃H nanoparticles under solvent-free condition. The choice of this approach showed essential advantages such as short reaction time, simple work-up procedure, high activity of the catalyst, high yield of the reaction products, the magnetic properties of the catalyst, and environmentally amiable conditions. In addition, the catalyst recovered and reused four times without notable loss of its activity. The magnetic CoNiFe₂O₄@Silica-SO₃H nanoparticles were described by Fourier-transform infrared spectroscopy (FT-IR), field emission scanning electron microscope, energy dispersive X-ray spectroscopy, X-ray diffraction spectroscopy, and vibrating sample magnetometer. The products were obtained with excellent yields (88–98%). The formation of the products was confirmed and identified with their physical properties (melting points), the FT-IR, ¹H NMR, ¹³C NMR, mass spectrometry, and the elemental analysis.     

Green synthesis of 1H-pyrazolo[1,2-b]phthalazine-2-carbonitrile derivatives using a new bifunctional base–ionic liquid hybrid magnetic nanocatalyst

The ionic liquid-base N,N,2,2,6,6-hexamethyl-N-(3-(trimethoxysilyl)propyl)piperidin-4-amonium iodide was grafted onto titana-coated NiFe₂O₄ nanoparticles for obtaining an efficient and reusable ionic liquid-base hybrid nanocatalyst. The structure of hybrid nanoparticles was characterized using FT-IR (Fourier-transform infrared spectroscopy), field emission scanning electron microscopy, EDS (energy-dispersive X-ray spectroscopy), EDS map scan, Brunauer–Emmett–Teller surface area analysis, CHN (elemental analysis), vibrating sample magnetometer and thermogravimetric analysis techniques. Furthermore, this novel hybrid catalyst was used in one-pot three-component synthesis of 3-amino-1-aryl-5,10-dioxo-1H-pyrazolo[1,2-b]phthalazine-2-carbonitrile derivatives under green and environmentally benign conditions. This protocol avoids the use of harmful catalysts, toxic solvents and harsh reaction conditions. The products were synthesized in excellent yields within short reaction time and identified using elemental analysis, FT-IR, ¹H NMR and ¹³C NMR spectroscopies.     

4,5‐Imidazoledicarboxylic acid immobilized on Fe3O4 magnetic nanoparticles: Preparation,characterization, and application as a recyclable and efficient nanocatalyst in the sonochemical condensation reaction

A green synthesis of benzimidazole derivatives using recyclable magnetic 4,5‐imidazoledicarboxylic is described. The magnetic 4,5‐imidazoledicarboxylic (Fe₃O₄@ImDCA) nanocatalyst was characterized completely by infrared spectroscopy (FT‐IR), energy‐dispersive X‐ray spectroscopy (EDX), scanning electron microscopy (SEM), and powder X‐ray diffraction (XRD), and benzimidazoles were characterized by their melting points, FT‐IR, and ¹H NMR. The current approach provides a number of advantages in terms of high yields, low reaction times, the use of green media, and easy work‐up.     

β−cyclodextrins-based inclusion complexes of CoFe2O4 magnetic nanoparticles as catalyst for the luminol chemiluminescence system and their applications in hydrogen peroxide detection

β−cyclodextrins (β−CD)-based inclusion complexes of CoFe₂O₄ magnetic nanoparticles (MNPs) were prepared and used as catalysts for chemiluminescence (CL) system using the luminol-hydrogen peroxide CL reaction as a model. The as-prepared inclusion complexes were characterized by XRD (X-ray diffraction), TGA (thermal gravimetric analysis) and FT-IR. The oxidation reaction between luminol and hydrogen peroxide in basic media initiated CL. The effect of β−CD-based inclusion complexes of CoFe₂O₄ magnetic nanoparticles and naked CoFe₂O₄ magnetic nanoparticles on the luminol-hydrogen peroxide CL system was investigated. It was found that inclusion complexes between β−CD and CoFe₂O₄ magnetic nanoparticles could greatly enhance the CL of the luminol-hydrogen peroxide system. Investigation on the kinetic curves and the chemiluminescence spectra of the luminol-hydrogen peroxide system demonstrates that addition of CoFe₂O₄ MNPs or inclusion complexes between β−CD and CoFe₂O₄ MNPs does not produce a new luminophor of the chemiluminescent reaction. The luminophor for the CL system was still the excited-state 3-aminophthalate anions (3-APA*). The enhanced CL signals were thus ascribed to the possible catalysis from CoFe₂O₄ MNPs or inclusion complexes between β−CD and CoFe₂O₄ nanoparticles. The feasibility of employing the proposed system for hydrogen peroxide sensing was also investigated. Experimental results showed that the CL emission intensity was linear with hydrogen peroxide concentration in the range of 1.0 × 10⁻⁷ to 4.0 × 10⁻⁶ mol L⁻¹ with a detection limit of 2.0 × 10⁻⁸ mol L⁻¹ under optimized conditions. The proposed method has been used to determine hydrogen peroxide in water samples successfully.