A Memristive Element Based on an Electrically Controlled Single‐Molecule Reaction

The exponential proliferation of data during the information age has required the continuous exploration of novel storage paradigms, materials, and devices with increasing data density. As a step toward the ultimate limits in data density, the development of an electrically controllable single‐molecule memristive element is reported. In this device, digital information is encoded through switching between two isomer states by applying a voltage signal to the molecular junction, and the information is read out by monitoring the electrical conductance of each isomer. The two states are cycled using an electrically controllable local‐heating mechanism for the forward reaction and catalyzed by a single charge‐transfer process for the reverse switching. This single‐molecule device can be modulated in situ, is fully reversible, and does not display stochastic switching. The I–V curves of this single‐molecule system also exhibit memristive character. These features suggest a new approach for the development of molecular switching systems and storage‐class memories.     

Tuning of nonvolatile bipolar memristive switching in Co(III) polymer with an extended azo aromatic ligand

We have fabricated a unique memristive device by molecular engineering and demonstrated that the leakage current tuning in the device is 100 times more efficient than that in a standard device. Molecular analogs of the memristive matrices used here are an electrochemically active conjugated Co(III) polymer (CP) and a nonconjugated Co(III) polymer (NCP), which have been synthesized in good yield and characterized by (1)H NMR spectroscopy. Redox switching of an organic-metallic hybrid polymer generates bistable states with a large ON/OFF ratio that supports random flip-flops for several hours. Thus, we provide a synthetic solution to leakage current restriction, one of the fundamental problems faced when fabricating state-of-the-art electronic devices.     

Dual defects of cation and anion in memristive nonvolatile memory of metal oxides

The electrically driven resistance change of metal oxides, called bipolar memristive switching, is a fascinating phenomenon in the development of next-generation nonvolatile memory alternatives to flash technology. However, our understanding of the nature of bipolar memristive switching is unfortunately far from comprehensive, especially the relationship between the electrical transport and the local nonstoichiometry. Here we demonstrate that the coexistence of anion and cation defects is critical to the transport properties of NiO, one of the most promising memristive oxides, by utilizing first-principles calculations. We find that, in the presence of both nickel and oxygen defects, which must exist in any real experimental systems, carrier concentrations of holes generated by nickel defects can be modulated by the presence or absence of oxygen defects around the nickel defect. Such alternation of local nonstoichiometry can be understood in terms of an oxygen ion drift induced by an external electric field. This implication provides a foundation for understanding universally the nature of bipolar memristive switching in various p-type metal oxides.     

Multicolour Fluorescent Memory Based on the Interaction of Hydroxy Terphenyls with Fluoride Anions

Memory operations based on variation of a molecule’s properties are important because they may lead to device miniaturization to the molecular scale or increasingly complex information processing protocols beyond the binary level. Molecular memory also introduces possibilities related to information‐storage security where chemical information (or reagents) might be used as an encryption key, in this case, acidic/basic reagents. Chemical memory that possesses both volatile and non‐volatile functionality requires reversible conversion between at least two chemically different stable or quasi‐stable states. Here we have developed the phenol–phenoxide equilibrium of phenol fluorophores as a data storage element, which can be used to write or modulate data using chemical reagents. The properties of this system allow data to be stored and erased either in non‐volatile or volatile modes. We also demonstrate non‐binary switching of states made possible by preparation of  a composite containing the molecular memory elements.     

Achieving Efficient Multichannel Conductance in Through-Space Conjugated Single-Molecule Parallel Circuits

Constructing single-molecule parallel circuits with multiple conduction channels is an effective strategy to improve the conductance of a single molecular junction, but rarely reported. We present a novel through-space conjugated single-molecule parallel circuit (f-4Ph-4SMe) comprised of a pair of closely parallelly aligned p-quaterphenyl chains tethered by a vinyl bridge and end-capped with four SMe anchoring groups. Scanning-tunneling-microscopy-based break junction (STM-BJ) and transmission calculations demonstrate that f-4Ph-4SMe holds multiple conductance states owing to different contact configurations. When four SMe groups are in contact with two electrodes at the same time, the through-bond and through-space conduction channels work synergistically, resulting in a conductance much larger than those of analogous molecules with two SMe groups or the sum of two p-quaterphenyl chains. The system is an ideal model for understanding electron transport through parallel π-stacked molecular systems and may serve as a key component for integrated molecular circuits with controllable conductance.     

Light-Modulated Self-Blockage of a Urea Binding Site in a Stiff-Stilbene Based Anion Receptor

Anion binding to a receptor based on stiff-stilbene, which is equipped with a urea hydrogen bond donating group and a phosphate or phosphinate hydrogen bond accepting group, can be controlled by light. In one photoaddressable state (E isomer) the urea binding site is available for binding, while in the other (Z isomer) it is blocked because of an intramolecular interaction with its hydrogen bond accepting motif. This intramolecular interaction is supported by DFT calculations and ¹H NMR titrations reveal a significantly lower anion binding strength for the state in which anion binding is blocked. Furthermore, the molecular switching process has been studied in detail by UV/Vis and NMR spectroscopy. The presented approach opens up new opportunities toward the development of photoresponsive anion receptors.     

Thermally Driven Nanofuses Based on Organometallic Rotors

Molecular design of chromium arenes are theoretically studied as a model for the development of novel thermally‐driven molecular fuses. This study correlates the switching event with a partial disconnection of the molecule from the metallic electrode mediated by changes in the conformational states of the molecule directed by external stimuli. Moreover, the reversibility of the process (the reconnection to the metallic electrode) is also considered for these systems when a reversal voltage pulse (reset) is applied. The energetic requirements of the on and off states are correlated with temperature through the Arrhenius equation. To carry out this study we performed density functional theory (DFT) calculations.     

Unravelling Structural Dynamics within a Photoswitchable Single Peptide: A Step Towards Multimodal Bioinspired Nanodevices

The majority of the protein structures have been elucidated under equilibrium conditions. The aim herein is to provide a better understanding of the dynamic behavior inherent to proteins by fabricating a label-free nanodevice comprising a single-peptide junction to measure real-time conductance, from which their structural dynamic behavior can be inferred. This device contains an azobenzene photoswitch for interconversion between a well-defined cis, and disordered trans isomer. Real-time conductance measurements revealed three distinct states for each isomer, with molecular dynamics simulations showing each state corresponds to a specific range of hydrogen bond lengths within the cis isomer, and specific dihedral angles in the trans isomer. These insights into the structural dynamic behavior of peptides may rationally extend to proteins. Also demonstrated is the capacity to modulate conductance which advances the design and development of bioinspired electronic nanodevices.     

4,4′‐Bipyridine as a Unidirectional Switching Unit for a Molecular Pushing Motor

A chirality switch in which the intrinsic chirality of a 4,4′‐bipyridine is combined with a metal‐ion‐induced switching principle is described. In the uncomplexed state the 4,4′‐bipyridine unit, which is linked to an S,S,S,S‐configured cyclic imidazole peptide, is P‐configured. The addition of zinc ions leads to a rotation around the C?C bond axis of the 4,4′‐bipyridine and the M isomer of the metal complex is formed. By addition of a stronger complexing agent the metal ions are removed and the switch returns to its initial position. The combination of the chirality switch with a second switching unit allows the construction of a molecular pushing motor, which is driven chemically and by light.     

Ternary Flexible Electro‐resistive Memory Device based on Small Molecules

Flexible memory devices have continued to attract more attention due to the increasing requirement for miniaturization, flexibility, and portability for further electronic applications. However, all reported flexible memory devices have binary memory characteristics, which cannot meet the demand of ever‐growing information explosion. Organic resistive switching random access memory (RRAM) has plenty of advantages such as simple structure, facile processing, low power consumption, high packaging density, as well as the ability to store multiple states per bit (multilevel). In this study, we report a small molecule‐based flexible ternary memory device for the first time. The flexible device maintains its ternary memory behavior under different bending conditions and within 500 bending cycles. The length of the alkyl chains in the molecular backbone play a significant role in molecular stacking, thus guaranteeing satisfactory memory and mechanical properties.     

Reconfigurable Logic Devices on a Single Dopant Atom—Operation up to a Full Adder by Using Electrical Spectroscopy

A silicon field‐effect transistor is operated as a logic circuit by electrically addressing the ground and excited electronic states of an embedded single dopant atom. Experimental results—complemented by analytical and computational calculations—are presented. First, we show how a complete set of binary logic gates can be realized on the same hardware. Then, we show that these gates can be operated in parallel on the very same dopant up to the logic level of a full adder. To use the device not as a switch but as a full logic circuit, we make essential use of the excited electronic states of the dopant and of the ability to shift their energy by gating. The experimental ability to use two channels to measure the current flowing through the device and the conductance (dI/dV) allows for a robust reading of the output of the logic operations.     

电化学门控调节具有平行路径的单分子电路中电子传输

电化学门控已成为一种可行且高效调节单分子电导的方法。在本研究中,我们证实了具有两个平行苯环的单分子电路中电子传输可以通过电化学门控控制。首先,我们利用STM-BJ技术以金为电极构筑了具有两条平行路径的单分子结。与单条路径的单分子结相比,两条路径的分子结由于具有增强性量子干涉效应,具有2.82倍的电导值。进一步地,我们利用电化学门控对具有两个平行苯环的单分结的电导进行调控,获得了333%·V^-1调节比。结合DFT计算,发现在E=E_F附近的V形透射系数谱图导致了实验观测的电导门控行为。本研究揭示了具有平行路径的单分子电路的电化学门控行为,并为设计高性能分子器件的分子材料提供了新的途径。     

Logic Information Communication in a Fluorescent Molecular Switch

Based on the chemical‐sensitive fluorescence emission behaviors of the molecular switch 4‐bromo‐5‐methoxy‐2‐(2‐pyridyl)thiazole ( 2‐BMPT ), the communication of logic information between two functional units has been realized. With the rational control of the protonation and coordination reaction of 2‐BMPT , an upstream switching unit (a 1:2 demultiplexer) and two downstream data‐processing units are involved and interconnected in the communication. The two output states of the 1:2 demultiplexer serve as the initial input states of the two parallel downstream data‐processing units, which execute the information communication between the two circuit layers. Furthermore, in the parallel data‐processing layer, the logic gates of INHIBIT and YES accomplish their specific logic functions. Therefore, a molecular cascade circuit composed of an upstream switch and two downstream processing units has been constructed based on the chemical‐modulated fluorescence properties of 2‐BMPT .     

Increased Surface Density of States at the Fermi Level for Electron Transport Across Single-Molecule Junctions

Fermi's golden rule, a remarkable concept for the transition probability involving continuous states, is applicable to the interfacial electron-transporting efficiency via correlation with the surface density of states (SDOS). Yet, this concept has not been reported to tailor single-molecule junctions where gold is an overwhelmingly popular electrode material due to its superior amenability in regenerating molecular junctions. At the Fermi level, however, the SDOS of gold is small due to its fully filled d-shell. To increase the electron-transport efficiency, herein, gold electrodes are modified by a monolayer of platinum or palladium that bears partially filled d-shells and exhibits significant SDOS at the Fermi energy. An increase by 2–30 fold is found for single-molecule conductance of α,ω-hexanes bridged via common headgroups. The improved junction conductance is attributed to the electrode self-energy which involves a stronger coupling with the molecule and a larger SDOS participated by d-electrons at the electrode-molecule interfaces.     

Understanding the Role of Parallel Pathways via In-Situ Switching of Quantum Interference in Molecular Tunneling Junctions

This study describes the modulation of tunneling probabilities in molecular junctions by switching one of two parallel intramolecular pathways. A linearly conjugated molecular wire provides a rigid framework that allows a second, cross-conjugated pathway to be effectively switched on and off by protonation, affecting the total conductance of the junction. This approach works because a traversing electron interacts with the entire quantum-mechanical circuit simultaneously; Kirchhoff's rules do not apply. We confirm this concept by comparing the conductances of a series of compounds with single or parallel pathways in large-area junctions using EGaIn contacts and single-molecule break junctions using gold contacts. We affect switching selectively in one of two parallel pathways by converting a cross-conjugated carbonyl carbon into a trivalent carbocation, which replaces destructive quantum interference with a symmetrical resonance, causing an increase in transmission in the bias window.     

Memristive Effect in Ti3C2Tx (MXene) Polyelectrolyte Multilayers

The emerging novel class of two-dimensional materials – MХenes – have attracted significant research attention. However, there are only few reports on using the most prominent member of the MXene family, Ti₃C₂T_x, as an active material for memristive devices within a polyelectrolyte matrix and its deposition on inert electrodes like ITO and Pt. In this study, we systematically investigate Ti₃C₂T_x MXenes synthesized with two classical delamination agents, such as lithium chloride and tetramethylammonium hydroxide, to identify the most suitable candidate for memristive device applications. The characteristics of memristors based on the hybrid structures consisting of MXene−polyelectrolyte multilayers, specifically polyethyleneimine (PEI) and poly(sodium 4-styrenesulfonate) (PSS) are explored. The PEI(MXene)/PSS memristor exhibits a voltage threshold (V_SET/RESET) range of 1.5–2.0 V, enabling the transition from a high-resistive state (HRS) to a low-resistive state (LRS), along with a significant current switching ratio of approximately two orders of magnitude. The observed V_SET/RESET difference of approximately 4 V is further supported by density functional theory (DFT) calculated redox potential. These findings underscore the potential of polyelectrolyte-based memristors, such as the in PEI−Ti₃C₂T_x−PSS system, in facilitating the development of highly functional, self-assembled memristive devices with diverse applications.     

Small Janus dimer as electric field manipulated molecular clam switch and electric information storage unit

A small Janus molecular dimer, as external electric field (F_z) manipulated both a molecular clam switch and a novel electric information storage unit, is found by quantum chemical computations for the first time. The molecular clam switching is intriguing and reversible. A critical F_z value of 95 × 10⁻⁴ au causes a dramatically open change in conformation from Closed form to Open form. And a small reversed electric field of F_z = −10 × 10⁻⁴ au performs a close change from Open form to Closed form. In the switching process, owing to the existence of a great electric dipole moment (μ) contrast between 0 and 22.13 D, the molecular clam switch may serve as an electric information storage unit. Gratifyingly, the reading, writing, and erasing of binary information on the electric information storage unit are easy. And further calculations show that Janus graphene fragment dimer can also serve as a molecular clam switch. Thus, this work proposes a new molecular switch prototype in the invention of artificial molecular machines, and a novel electric information storage unit in the field of molecular electronics.     

Photo‐/Baso‐Chromisms and the Application of a Dual‐Addressable Molecular Switch

Two typical molecular switches of spiropyran (SP) and benzoxazine (OX) were fused by sharing an indole to achieve a new dual‐addressable molecular switch (SP‐OX‐NO₂). Through proper molecular modification with NO₂, the transformation from merocyanine (MC) to ring‐closed SP or ring‐closed OX can be controlled separately with visible light or base stimuli in solution, respectively, and these processes are verified by UV‐vis and NMR spectroscopy as well as control experiments. The cis‐merocyanine (cis‐MC) form is involved in the basochromic process in solution. DFT calculation suggests that the bidirectional switching property of the fused SP‐OX molecular switch can be controlled separately, when the OX isomer is more stable than the deprotonated SP isomer. Because of the significant color variations in solution, the simple dual‐addressable switch has been further successfully applied to construct a multicolor reversible display on paper.     

Ab initio investigation of the switching behavior of the dithiole-benzene nano-molecular wire

We report a first-principle study of electrical transport and switching behavior in a single molecular conductor consisting of a dithiole-benzene (DTB) sandwiched between two Au(100) electrodes. Ab initio total energy calculations reveal DTB molecules on a gold surface, contacted by a monoatomic gold scanning tunneling microscope (STM) tip to have two classes of low energy conformations with differing symmetries. Lateral motion of the tip or excitation of the molecule cause it to change from one conformation class to the other and to switch between a strongly and a weakly conducting state. Thus, surprisingly, despite their apparent simplicity, these Au-DTB-Au nanowires are shown to be electrically bi-stable switches, the smallest two-terminal molecular switches to date. The projected density of states (PDOS) and transmission coefficients are analyzed, and it suggests that the variation of the coupling between the molecule and the electrodes with external bias leads to switching behavior.     

Deciphering the Mechanism Involved in the Switch On/Off of Molecular Pistons

Manufacturing machines converting energy to mechanical work at the molecular level is a vital pathway to explore the microscopic world. A kind of operable molecular engines, composed of β‐cyclodextrin (β‐CD), aryl, alkene and amide moiety was investigated using molecular dynamics simulations combined with free‐energy calculations. To understand how the integrated alkene double bond controls the work performed on the engines, two alkene isomers of the prototype were considered as two molecular engines. The free‐energy profiles delineating the binding process of the amide (Z)‐ and (E)‐isomers for each alkene isomer with 1‐adamantanol indicate that for the alkene (E)‐isomer, the apparent work performed on the amide bond is 1.6 kcal/mol, while the alkene (Z)‐isomer is incapable to perform work. Direct switch on/off of engines caused by the isomerization of the alkene bond was, therefore, witnessed, in line with experimental measurements. Decomposition of the free‐energy profile into different components and structural analyses suggest that the isomerization of the alkene bond controls the position of the aryl unit relative to the cavity of the CD, resulting in the difference among the free‐energy profiles and the stark contrast of the work performed on engines.